Files
Last update 2 years 10 months
by
Francesco Gambino
pcb_wrist.kicad_pcb-bak(kicad_pcb (version 20171130) (host pcbnew "(5.1.9)-1") (general (thickness 1.6) (drawings 8) (tracks 47) (zones 0) (modules 42) (nets 51) ) (page A4) (layers (0 F.Cu signal) (31 B.Cu signal) (32 B.Adhes user) (33 F.Adhes user) (34 B.Paste user hide) (35 F.Paste user) (36 B.SilkS user) (37 F.SilkS user) (38 B.Mask user) (39 F.Mask user) (40 Dwgs.User user) (41 Cmts.User user hide) (42 Eco1.User user) (43 Eco2.User user) (44 Edge.Cuts user) (45 Margin user) (46 B.CrtYd user hide) (47 F.CrtYd user) (48 B.Fab user hide) (49 F.Fab user hide) ) (setup (last_trace_width 0.254) (user_trace_width 0.2032) (user_trace_width 0.254) (user_trace_width 0.4064) (user_trace_width 1.016) (user_trace_width 2.032) (trace_clearance 0.2) (zone_clearance 0.508) (zone_45_only no) (trace_min 0.2) (via_size 0.8) (via_drill 0.4) (via_min_size 0.4) (via_min_drill 0.3) (uvia_size 0.3) (uvia_drill 0.1) (uvias_allowed no) (uvia_min_size 0.2) (uvia_min_drill 0.1) (edge_width 0.05) (segment_width 0.2) (pcb_text_width 0.3) (pcb_text_size 1.5 1.5) (mod_edge_width 0.12) (mod_text_size 1 1) (mod_text_width 0.15) (pad_size 1.524 1.524) (pad_drill 0.762) (pad_to_mask_clearance 0.051) (solder_mask_min_width 0.25) (aux_axis_origin 0 0) (visible_elements 7FFFFFFF) (pcbplotparams (layerselection 0x010fc_ffffffff) (usegerberextensions false) (usegerberattributes false) (usegerberadvancedattributes false) (creategerberjobfile false) (excludeedgelayer true) (linewidth 0.100000) (plotframeref false) (viasonmask false) (mode 1) (useauxorigin false) (hpglpennumber 1) (hpglpenspeed 20) (hpglpendiameter 15.000000) (psnegative false) (psa4output false) (plotreference true) (plotvalue true) (plotinvisibletext false) (padsonsilk false) (subtractmaskfromsilk false) (outputformat 1) (mirror false) (drillshape 1) (scaleselection 1) (outputdirectory "")) ) (net 0 "") (net 1 GND) (net 2 +5V) (net 3 +12V) (net 4 "Net-(D1-Pad2)") (net 5 "Net-(D3-Pad2)") (net 6 RSTn) (net 7 UART_RX) (net 8 UART_TX) (net 9 MISO) (net 10 MOSI) (net 11 SCK) (net 12 END_STOP2) (net 13 CONTACT_1) (net 14 CONTACT_2) (net 15 ENC_A) (net 16 ENC_B) (net 17 ENC_Z) (net 18 END_STOP1) (net 19 "Net-(A1-Pad12)") (net 20 "Net-(A1-Pad11)") (net 21 "Net-(A1-Pad10)") (net 22 "Net-(A1-Pad2)") (net 23 AVCC) (net 24 "Net-(Q1-Pad3)") (net 25 SDA) (net 26 SCL) (net 27 "Net-(U1-Pad22)") (net 28 STP_DIR) (net 29 STP_STEP) (net 30 STP_EN) (net 31 "Net-(C3-Pad1)") (net 32 "Net-(JP4-Pad2)") (net 33 "Net-(JP4-Pad3)") (net 34 FORCE_SENSOR_ADC) (net 35 LASER_GATE) (net 36 "Net-(R7-Pad2)") (net 37 "Net-(R8-Pad1)") (net 38 "Net-(R9-Pad1)") (net 39 "Net-(U1-Pad19)") (net 40 LED1) (net 41 B2) (net 42 B1) (net 43 A1) (net 44 A2) (net 45 "Net-(J2-PadMP2)") (net 46 "Net-(J2-PadMP1)") (net 47 LASER_OUT) (net 48 FORCE_SENSOR_IN) (net 49 "Net-(R10-Pad2)") (net 50 "Net-(R10-Pad1)") (net_class Default "Questo รจ il gruppo di collegamenti predefinito" (clearance 0.2) (trace_width 0.25) (via_dia 0.8) (via_drill 0.4) (uvia_dia 0.3) (uvia_drill 0.1) (add_net +12V) (add_net +5V) (add_net A1) (add_net A2) (add_net AVCC) (add_net B1) (add_net B2) (add_net CONTACT_1) (add_net CONTACT_2) (add_net ENC_A) (add_net ENC_B) (add_net ENC_Z) (add_net END_STOP1) (add_net END_STOP2) (add_net FORCE_SENSOR_ADC) (add_net FORCE_SENSOR_IN) (add_net GND) (add_net LASER_GATE) (add_net LASER_OUT) (add_net LED1) (add_net MISO) (add_net MOSI) (add_net "Net-(A1-Pad10)") (add_net "Net-(A1-Pad11)") (add_net "Net-(A1-Pad12)") (add_net "Net-(A1-Pad2)") (add_net "Net-(C3-Pad1)") (add_net "Net-(D1-Pad2)") (add_net "Net-(D3-Pad2)") (add_net "Net-(J2-PadMP1)") (add_net "Net-(J2-PadMP2)") (add_net "Net-(JP4-Pad2)") (add_net "Net-(JP4-Pad3)") (add_net "Net-(Q1-Pad3)") (add_net "Net-(R10-Pad1)") (add_net "Net-(R10-Pad2)") (add_net "Net-(R7-Pad2)") (add_net "Net-(R8-Pad1)") (add_net "Net-(R9-Pad1)") (add_net "Net-(U1-Pad19)") (add_net "Net-(U1-Pad22)") (add_net RSTn) (add_net SCK) (add_net SCL) (add_net SDA) (add_net STP_DIR) (add_net STP_EN) (add_net STP_STEP) (add_net UART_RX) (add_net UART_TX) ) (module Connector_Molex:Molex_PicoBlade_53398-0471_1x04-1MP_P1.25mm_Vertical (layer F.Cu) (tedit 5B78AD88) (tstamp 6098206B) (at 148.336 87.63) (descr "Molex PicoBlade series connector, 53398-0471 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator") (tags "connector Molex PicoBlade side entry") (path /6097D745) (attr smd) (fp_text reference J1 (at 0 -3.1) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value "Input Connector" (at 0 4.2) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -3.375 -1.1) (end 3.375 -1.1) (layer F.Fab) (width 0.1)) (fp_line (start -3.485 -0.26) (end -3.485 -1.21) (layer F.SilkS) (width 0.12)) (fp_line (start -3.485 -1.21) (end -2.535 -1.21) (layer F.SilkS) (width 0.12)) (fp_line (start -2.535 -1.21) (end -2.535 -1.9) (layer F.SilkS) (width 0.12)) (fp_line (start 3.485 -0.26) (end 3.485 -1.21) (layer F.SilkS) (width 0.12)) (fp_line (start 3.485 -1.21) (end 2.535 -1.21) (layer F.SilkS) (width 0.12)) (fp_line (start -3.115 2.71) (end 3.115 2.71) (layer F.SilkS) (width 0.12)) (fp_line (start -3.375 2.6) (end 3.375 2.6) (layer F.Fab) (width 0.1)) (fp_line (start -3.375 -1.1) (end -3.375 2.6) (layer F.Fab) (width 0.1)) (fp_line (start 3.375 -1.1) (end 3.375 2.6) (layer F.Fab) (width 0.1)) (fp_line (start -2.025 1.225) (end -2.025 1.825) (layer F.Fab) (width 0.1)) (fp_line (start -2.025 1.825) (end -1.725 1.825) (layer F.Fab) (width 0.1)) (fp_line (start -1.725 1.825) (end -1.725 1.225) (layer F.Fab) (width 0.1)) (fp_line (start -1.725 1.225) (end -2.025 1.225) (layer F.Fab) (width 0.1)) (fp_line (start -0.775 1.225) (end -0.775 1.825) (layer F.Fab) (width 0.1)) (fp_line (start -0.775 1.825) (end -0.475 1.825) (layer F.Fab) (width 0.1)) (fp_line (start -0.475 1.825) (end -0.475 1.225) (layer F.Fab) (width 0.1)) (fp_line (start -0.475 1.225) (end -0.775 1.225) (layer F.Fab) (width 0.1)) (fp_line (start 0.475 1.225) (end 0.475 1.825) (layer F.Fab) (width 0.1)) (fp_line (start 0.475 1.825) (end 0.775 1.825) (layer F.Fab) (width 0.1)) (fp_line (start 0.775 1.825) (end 0.775 1.225) (layer F.Fab) (width 0.1)) (fp_line (start 0.775 1.225) (end 0.475 1.225) (layer F.Fab) (width 0.1)) (fp_line (start 1.725 1.225) (end 1.725 1.825) (layer F.Fab) (width 0.1)) (fp_line (start 1.725 1.825) (end 2.025 1.825) (layer F.Fab) (width 0.1)) (fp_line (start 2.025 1.825) (end 2.025 1.225) (layer F.Fab) (width 0.1)) (fp_line (start 2.025 1.225) (end 1.725 1.225) (layer F.Fab) (width 0.1)) (fp_line (start -3.375 2.6) (end -4.875 2.6) (layer F.Fab) (width 0.1)) (fp_line (start -4.875 2.6) (end -5.075 2.4) (layer F.Fab) (width 0.1)) (fp_line (start -5.075 2.4) (end -5.075 0.6) (layer F.Fab) (width 0.1)) (fp_line (start -5.075 0.6) (end -4.875 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -4.875 0.4) (end -4.875 -0.2) (layer F.Fab) (width 0.1)) (fp_line (start -4.875 -0.2) (end -3.375 -0.2) (layer F.Fab) (width 0.1)) (fp_line (start 3.375 2.6) (end 4.875 2.6) (layer F.Fab) (width 0.1)) (fp_line (start 4.875 2.6) (end 5.075 2.4) (layer F.Fab) (width 0.1)) (fp_line (start 5.075 2.4) (end 5.075 0.6) (layer F.Fab) (width 0.1)) (fp_line (start 5.075 0.6) (end 4.875 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 4.875 0.4) (end 4.875 -0.2) (layer F.Fab) (width 0.1)) (fp_line (start 4.875 -0.2) (end 3.375 -0.2) (layer F.Fab) (width 0.1)) (fp_line (start -5.98 -2.4) (end -5.98 3.5) (layer F.CrtYd) (width 0.05)) (fp_line (start -5.98 3.5) (end 5.98 3.5) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.98 3.5) (end 5.98 -2.4) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.98 -2.4) (end -5.98 -2.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.375 -1.1) (end -1.875 -0.392893) (layer F.Fab) (width 0.1)) (fp_line (start -1.875 -0.392893) (end -1.375 -1.1) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0.4) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad MP smd roundrect (at 4.425 1.5) (size 2.1 3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.119048)) (pad MP smd roundrect (at -4.425 1.5) (size 2.1 3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.119048)) (pad 4 smd roundrect (at 1.875 -1.25) (size 0.8 1.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 3 smd roundrect (at 0.625 -1.25) (size 0.8 1.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 8 UART_TX)) (pad 2 smd roundrect (at -0.625 -1.25) (size 0.8 1.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 7 UART_RX)) (pad 1 smd roundrect (at -1.875 -1.25) (size 0.8 1.3) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 3 +12V)) (model ${KISYS3DMOD}/Connector_Molex.3dshapes/Molex_PicoBlade_53398-0471_1x04-1MP_P1.25mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 609919EF) (at 125.222 114.046) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /609A1FA4) (attr smd) (fp_text reference D3 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value LED (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.146267 -0.51) (end 0.146267 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.146267 0.51) (end 0.146267 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 5 "Net-(D3-Pad2)")) (pad 1 smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Module:Pololu_Breakout-16_15.2x20.3mm (layer F.Cu) (tedit 58AB602C) (tstamp 60991850) (at 157.48 107.188 90) (descr "Pololu Breakout 16-pin 15.2x20.3mm 0.6x0.8\\") (tags "Pololu Breakout") (path /60A29004/60A2BBA2) (fp_text reference A1 (at 6.35 -2.54 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Pololu_Breakout_DRV8825 (at 6.35 20.17 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 11.43 -1.4) (end 11.43 19.18) (layer F.SilkS) (width 0.12)) (fp_line (start 1.27 1.27) (end 1.27 19.18) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.4) (end -1.4 -1.4) (layer F.SilkS) (width 0.12)) (fp_line (start -1.4 -1.4) (end -1.4 0) (layer F.SilkS) (width 0.12)) (fp_line (start 1.27 -1.4) (end 1.27 1.27) (layer F.SilkS) (width 0.12)) (fp_line (start 1.27 1.27) (end -1.4 1.27) (layer F.SilkS) (width 0.12)) (fp_line (start -1.4 1.27) (end -1.4 19.18) (layer F.SilkS) (width 0.12)) (fp_line (start -1.4 19.18) (end 14.1 19.18) (layer F.SilkS) (width 0.12)) (fp_line (start 14.1 19.18) (end 14.1 -1.4) (layer F.SilkS) (width 0.12)) (fp_line (start 14.1 -1.4) (end 1.27 -1.4) (layer F.SilkS) (width 0.12)) (fp_line (start -1.27 0) (end 0 -1.27) (layer F.Fab) (width 0.1)) (fp_line (start 0 -1.27) (end 13.97 -1.27) (layer F.Fab) (width 0.1)) (fp_line (start 13.97 -1.27) (end 13.97 19.05) (layer F.Fab) (width 0.1)) (fp_line (start 13.97 19.05) (end -1.27 19.05) (layer F.Fab) (width 0.1)) (fp_line (start -1.27 19.05) (end -1.27 0) (layer F.Fab) (width 0.1)) (fp_line (start -1.53 -1.52) (end 14.21 -1.52) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.53 -1.52) (end -1.53 19.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 14.21 19.3) (end 14.21 -1.52) (layer F.CrtYd) (width 0.05)) (fp_line (start 14.21 19.3) (end -1.53 19.3) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 6.35 0 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 16 thru_hole oval (at 12.7 0 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask) (net 28 STP_DIR)) (pad 8 thru_hole oval (at 0 17.78 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask) (net 3 +12V)) (pad 15 thru_hole oval (at 12.7 2.54 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask) (net 29 STP_STEP)) (pad 7 thru_hole oval (at 0 15.24 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask) (net 1 GND)) (pad 14 thru_hole oval (at 12.7 5.08 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask) (net 2 +5V)) (pad 6 thru_hole oval (at 0 12.7 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask) (net 41 B2)) (pad 13 thru_hole oval (at 12.7 7.62 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask) (net 2 +5V)) (pad 5 thru_hole oval (at 0 10.16 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask) (net 42 B1)) (pad 12 thru_hole oval (at 12.7 10.16 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask) (net 19 "Net-(A1-Pad12)")) (pad 4 thru_hole oval (at 0 7.62 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask) (net 43 A1)) (pad 11 thru_hole oval (at 12.7 12.7 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask) (net 20 "Net-(A1-Pad11)")) (pad 3 thru_hole oval (at 0 5.08 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask) (net 44 A2)) (pad 10 thru_hole oval (at 12.7 15.24 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask) (net 21 "Net-(A1-Pad10)")) (pad 2 thru_hole oval (at 0 2.54 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask) (net 22 "Net-(A1-Pad2)")) (pad 9 thru_hole oval (at 12.7 17.78 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask) (net 30 STP_EN)) (pad 1 thru_hole rect (at 0 0 90) (size 1.6 1.6) (drill 0.8) (layers *.Cu *.Mask) (net 1 GND)) (model ${KIPRJMOD}/Libraries/3d_models/DRV8825.step (offset (xyz -1.5 1 -8.5)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 90)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer F.Cu) (tedit 5F68FEEE) (tstamp 6098B50C) (at 120.65 103.632 270) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /6099F730) (attr smd) (fp_text reference R10 (at 3.556 0.254 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1M (at 0 1.65 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 1 0 270) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.208333) (net 49 "Net-(R10-Pad2)")) (pad 1 smd roundrect (at -1 0 270) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.208333) (net 50 "Net-(R10-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module MountingHole:MountingHole_2.2mm_M2_Pad_Via (layer F.Cu) (tedit 56DDB9C7) (tstamp 608EC012) (at 163.26 81.016) (descr "Mounting Hole 2.2mm, M2") (tags "mounting hole 2.2mm m2") (path /5E8D7A5C) (attr virtual) (fp_text reference H4 (at 0 -3.2) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value MountingHole (at 0 3.2) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 2.2 0) (layer Cmts.User) (width 0.15)) (fp_circle (center 0 0) (end 2.45 0) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0.3 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole circle (at 1.166726 -1.166726) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at 0 -1.65) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at -1.166726 -1.166726) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at -1.65 0) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at -1.166726 1.166726) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at 0 1.65) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at 1.166726 1.166726) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at 1.65 0) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at 0 0) (size 4.4 4.4) (drill 2.2) (layers *.Cu *.Mask)) ) (module MountingHole:MountingHole_2.2mm_M2_Pad_Via (layer F.Cu) (tedit 56DDB9C7) (tstamp 5E820F98) (at 163.26 121.016) (descr "Mounting Hole 2.2mm, M2") (tags "mounting hole 2.2mm m2") (path /5E8D91AF) (attr virtual) (fp_text reference H3 (at 0 -3.2) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value MountingHole (at 0 3.2) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 2.2 0) (layer Cmts.User) (width 0.15)) (fp_circle (center 0 0) (end 2.45 0) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0.3 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole circle (at 1.166726 -1.166726) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at 0 -1.65) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at -1.166726 -1.166726) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at -1.65 0) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at -1.166726 1.166726) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at 0 1.65) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at 1.166726 1.166726) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at 1.65 0) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at 0 0) (size 4.4 4.4) (drill 2.2) (layers *.Cu *.Mask)) ) (module MountingHole:MountingHole_2.2mm_M2_Pad_Via (layer F.Cu) (tedit 56DDB9C7) (tstamp 6092C10A) (at 133.26 81.016) (descr "Mounting Hole 2.2mm, M2") (tags "mounting hole 2.2mm m2") (path /5E8DA346) (attr virtual) (fp_text reference H2 (at 0 -3.2) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value MountingHole (at 0 3.2) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 2.2 0) (layer Cmts.User) (width 0.15)) (fp_circle (center 0 0) (end 2.45 0) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0.3 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole circle (at 1.166726 -1.166726) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at 0 -1.65) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at -1.166726 -1.166726) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at -1.65 0) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at -1.166726 1.166726) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at 0 1.65) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at 1.166726 1.166726) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at 1.65 0) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at 0 0) (size 4.4 4.4) (drill 2.2) (layers *.Cu *.Mask)) ) (module MountingHole:MountingHole_2.2mm_M2_Pad_Via (layer F.Cu) (tedit 56DDB9C7) (tstamp 5E820F90) (at 133.26 121.016) (descr "Mounting Hole 2.2mm, M2") (tags "mounting hole 2.2mm m2") (path /5E8D88B6) (attr virtual) (fp_text reference H1 (at 0 -3.2) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value MountingHole (at 0 3.2) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 2.2 0) (layer Cmts.User) (width 0.15)) (fp_circle (center 0 0) (end 2.45 0) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0.3 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 thru_hole circle (at 1.166726 -1.166726) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at 0 -1.65) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at -1.166726 -1.166726) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at -1.65 0) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at -1.166726 1.166726) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at 0 1.65) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at 1.166726 1.166726) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at 1.65 0) (size 0.7 0.7) (drill 0.4) (layers *.Cu *.Mask)) (pad 1 thru_hole circle (at 0 0) (size 4.4 4.4) (drill 2.2) (layers *.Cu *.Mask)) ) (module Crystal:Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mm (layer F.Cu) (tedit 5AD358ED) (tstamp 60989806) (at 123.444 103.632 90) (descr "SMD Resomator/Filter Murata CSTCE, https://www.murata.com/en-eu/products/productdata/8801162264606/SPEC-CSTNE16M0VH3C000R0.pdf") (tags "SMD SMT ceramic resonator filter") (path /6098B5C9) (attr smd) (fp_text reference Y1 (at -3.556 0 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value CSTNE16M0V53L000R (at 0 1.8 90) (layer F.Fab) (effects (font (size 0.2 0.2) (thickness 0.03))) ) (fp_line (start 1.8 1.2) (end 1 1.2) (layer F.SilkS) (width 0.12)) (fp_line (start 1.8 -1.2) (end 1.8 0.8) (layer F.SilkS) (width 0.12)) (fp_line (start 1 -1.2) (end 1.8 -1.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -1.2) (end -0.8 -1.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 0.8) (end -1.8 -1.2) (layer F.SilkS) (width 0.12)) (fp_line (start -0.8 1.2) (end -1.8 1.2) (layer F.SilkS) (width 0.12)) (fp_line (start -0.8 1.2) (end -0.8 1.6) (layer F.SilkS) (width 0.12)) (fp_line (start -2 -1.2) (end -2 0.8) (layer F.SilkS) (width 0.12)) (fp_line (start 1.8 0.8) (end 1.8 1.2) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 0.8) (end -1.8 1.2) (layer F.SilkS) (width 0.12)) (fp_line (start -2 0.8) (end -2 1.2) (layer F.SilkS) (width 0.12)) (fp_line (start 1.5 0.8) (end 1.5 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.5 -0.8) (end -1.5 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.8) (end -1.5 0.3) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.8) (end 1.5 0.8) (layer F.Fab) (width 0.1)) (fp_line (start -1.5 0.3) (end -1.5 -0.8) (layer F.Fab) (width 0.1)) (fp_line (start 1.75 1.2) (end -1.75 1.2) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.75 -1.2) (end 1.75 -1.2) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.75 -1.2) (end 1.75 1.2) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.75 1.2) (end -1.75 -1.2) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0.1 -0.05 90) (layer F.Fab) (effects (font (size 0.6 0.6) (thickness 0.08))) ) (pad 3 smd rect (at 1.2 0 90) (size 0.4 1.9) (layers F.Cu F.Paste F.Mask) (net 50 "Net-(R10-Pad1)")) (pad 2 smd rect (at 0 0 90) (size 0.4 1.9) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad 1 smd rect (at -1.2 0 90) (size 0.4 1.9) (layers F.Cu F.Paste F.Mask) (net 49 "Net-(R10-Pad2)")) (model ${KISYS3DMOD}/Crystal.3dshapes/Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module ICSP_smd_pad:ICSP_PADS (layer B.Cu) (tedit 6092E722) (tstamp 60982D00) (at 129.54 111.76) (path /60984EDE) (fp_text reference J3 (at 0 -0.5) (layer B.SilkS) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_text value ICSP (at 0 0.5) (layer B.Fab) (effects (font (size 1 1) (thickness 0.15)) (justify mirror)) ) (fp_line (start -4 -5) (end 7 -5) (layer B.SilkS) (width 0.12)) (fp_line (start 7 -5) (end 7 -1) (layer B.SilkS) (width 0.12)) (fp_line (start 7 -1) (end -4 -1) (layer B.SilkS) (width 0.12)) (fp_line (start -4 -1) (end -4 -5) (layer B.SilkS) (width 0.12)) (pad 5 smd rect (at 5.5 -3) (size 1.5 3) (layers B.Cu B.Paste B.Mask) (net 11 SCK)) (pad 4 smd rect (at 3.5 -3) (size 1.5 3) (layers B.Cu B.Paste B.Mask) (net 9 MISO)) (pad 3 smd rect (at 1.5 -3) (size 1.5 3) (layers B.Cu B.Paste B.Mask) (net 10 MOSI)) (pad 2 smd rect (at -0.5 -3) (size 1.5 3) (layers B.Cu B.Paste B.Mask) (net 6 RSTn)) (pad 1 smd rect (at -2.5 -3) (size 1.5 3) (layers B.Cu B.Paste B.Mask) (net 1 GND)) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer F.Cu) (tedit 5F68FEEE) (tstamp 60983039) (at 129.002 114.02 180) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /609A1F98) (attr smd) (fp_text reference R5 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value R (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 1 0 180) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.208333) (net 5 "Net-(D3-Pad2)")) (pad 1 smd roundrect (at -1 0 180) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.208333) (net 40 LED1)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer F.Cu) (tedit 5F68FEEE) (tstamp 60983028) (at 134.112 88.9 270) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /609A1FC6) (attr smd) (fp_text reference R4 (at -3.048 0 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10k (at 0 1.65 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 1 0 270) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.208333) (net 6 RSTn)) (pad 1 smd roundrect (at -1 0 270) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.208333) (net 2 +5V)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer F.Cu) (tedit 5F68FEEE) (tstamp 5E783C81) (at 156.21 75.946 90) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /5E9AA642) (attr smd) (fp_text reference R1 (at 0 -1.65 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 4.7k (at 0 1.65 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 1 0 90) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.208333) (net 2 +5V)) (pad 1 smd roundrect (at -1 0 90) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.208333) (net 4 "Net-(D1-Pad2)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module SamacSys_Parts:2035662007 (layer F.Cu) (tedit 0) (tstamp 60982098) (at 147.828 108.204 180) (descr 203566-2007-1) (tags Connector) (path /609E4E6C) (attr smd) (fp_text reference J2 (at 0 -3.4) (layer F.SilkS) (effects (font (size 1.27 1.27) (thickness 0.254))) ) (fp_text value 203566-2007 (at 0 -3.4) (layer F.SilkS) hide (effects (font (size 1.27 1.27) (thickness 0.254))) ) (fp_line (start 4.6 -7.2) (end 4.6 -7.2) (layer F.SilkS) (width 0.2)) (fp_line (start 4.4 -7.2) (end 4.4 -7.2) (layer F.SilkS) (width 0.2)) (fp_line (start 5.5 0.1) (end 6.5 0.1) (layer F.SilkS) (width 0.1)) (fp_line (start -5.5 0.1) (end -6.5 0.1) (layer F.SilkS) (width 0.1)) (fp_line (start 6.5 -5.8) (end 6.5 -2.5) (layer F.SilkS) (width 0.1)) (fp_line (start 5.5 -5.8) (end 6.5 -5.8) (layer F.SilkS) (width 0.1)) (fp_line (start -6.5 -5.8) (end -5.5 -5.8) (layer F.SilkS) (width 0.1)) (fp_line (start -6.5 -2.5) (end -6.5 -5.8) (layer F.SilkS) (width 0.1)) (fp_line (start -7.6 1.5) (end -7.6 -8.3) (layer F.CrtYd) (width 0.1)) (fp_line (start 7.6 1.5) (end -7.6 1.5) (layer F.CrtYd) (width 0.1)) (fp_line (start 7.6 -8.3) (end 7.6 1.5) (layer F.CrtYd) (width 0.1)) (fp_line (start -7.6 -8.3) (end 7.6 -8.3) (layer F.CrtYd) (width 0.1)) (fp_line (start -6.5 0.1) (end -6.5 -5.8) (layer F.Fab) (width 0.2)) (fp_line (start 6.5 0.1) (end -6.5 0.1) (layer F.Fab) (width 0.2)) (fp_line (start 6.5 -5.8) (end 6.5 0.1) (layer F.Fab) (width 0.2)) (fp_line (start -6.5 -5.8) (end 6.5 -5.8) (layer F.Fab) (width 0.2)) (fp_arc (start 4.5 -7.2) (end 4.6 -7.2) (angle 180) (layer F.SilkS) (width 0.2)) (fp_arc (start 4.5 -7.2) (end 4.4 -7.2) (angle 180) (layer F.SilkS) (width 0.2)) (fp_text user %R (at 0 -3.4) (layer F.Fab) (effects (font (size 1.27 1.27) (thickness 0.254))) ) (pad MP2 smd rect (at -6.175 -1.3 180) (size 0.85 1.8) (layers F.Cu F.Paste F.Mask) (net 45 "Net-(J2-PadMP2)")) (pad MP1 smd rect (at 6.175 -1.3 180) (size 0.85 1.8) (layers F.Cu F.Paste F.Mask) (net 46 "Net-(J2-PadMP1)")) (pad 20 smd rect (at -4.5 -0.3 180) (size 0.6 1.6) (layers F.Cu F.Paste F.Mask) (net 41 B2)) (pad 19 smd rect (at -4.5 -6 180) (size 0.6 1.6) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad 18 smd rect (at -3.5 -0.3 180) (size 0.6 1.6) (layers F.Cu F.Paste F.Mask) (net 41 B2)) (pad 17 smd rect (at -3.5 -6 180) (size 0.6 1.6) (layers F.Cu F.Paste F.Mask) (net 13 CONTACT_1)) (pad 16 smd rect (at -2.5 -0.3 180) (size 0.6 1.6) (layers F.Cu F.Paste F.Mask) (net 42 B1)) (pad 15 smd rect (at -2.5 -6 180) (size 0.6 1.6) (layers F.Cu F.Paste F.Mask) (net 14 CONTACT_2)) (pad 14 smd rect (at -1.5 -0.3 180) (size 0.6 1.6) (layers F.Cu F.Paste F.Mask) (net 42 B1)) (pad 13 smd rect (at -1.5 -6 180) (size 0.6 1.6) (layers F.Cu F.Paste F.Mask) (net 18 END_STOP1)) (pad 12 smd rect (at -0.5 -0.3 180) (size 0.6 1.6) (layers F.Cu F.Paste F.Mask) (net 44 A2)) (pad 11 smd rect (at -0.5 -6 180) (size 0.6 1.6) (layers F.Cu F.Paste F.Mask) (net 12 END_STOP2)) (pad 10 smd rect (at 0.5 -0.3 180) (size 0.6 1.6) (layers F.Cu F.Paste F.Mask) (net 44 A2)) (pad 9 smd rect (at 0.5 -6 180) (size 0.6 1.6) (layers F.Cu F.Paste F.Mask) (net 47 LASER_OUT)) (pad 8 smd rect (at 1.5 -0.3 180) (size 0.6 1.6) (layers F.Cu F.Paste F.Mask) (net 43 A1)) (pad 7 smd rect (at 1.5 -6 180) (size 0.6 1.6) (layers F.Cu F.Paste F.Mask) (net 26 SCL)) (pad 6 smd rect (at 2.5 -0.3 180) (size 0.6 1.6) (layers F.Cu F.Paste F.Mask) (net 43 A1)) (pad 5 smd rect (at 2.5 -6 180) (size 0.6 1.6) (layers F.Cu F.Paste F.Mask) (net 25 SDA)) (pad 4 smd rect (at 3.5 -0.3 180) (size 0.6 1.6) (layers F.Cu F.Paste F.Mask) (net 16 ENC_B)) (pad 3 smd rect (at 3.5 -6 180) (size 0.6 1.6) (layers F.Cu F.Paste F.Mask) (net 48 FORCE_SENSOR_IN)) (pad 2 smd rect (at 4.5 -0.3 180) (size 0.6 1.6) (layers F.Cu F.Paste F.Mask) (net 15 ENC_A)) (pad 1 smd rect (at 4.5 -6 180) (size 0.6 1.6) (layers F.Cu F.Paste F.Mask) (net 2 +5V)) (model ${KIPRJMOD}/Libraries/3d_models/2035662007.stp (offset (xyz 0 2.8 4)) (scale (xyz 1 1 1)) (rotate (xyz -90 0 0)) ) ) (module Package_SO:MSOP-8_3x3mm_P0.65mm (layer F.Cu) (tedit 5E509FDD) (tstamp 60936FF3) (at 144.272 120.396 270) (descr "MSOP, 8 Pin (https://www.jedec.org/system/files/docs/mo-187F.pdf variant AA), generated with kicad-footprint-generator ipc_gullwing_generator.py") (tags "MSOP SO") (path /60A4A1AA/60A5066F) (attr smd) (fp_text reference U2 (at 0 -2.45 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value LTC6081xMS8 (at 0 2.45 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 0 1.61) (end 1.5 1.61) (layer F.SilkS) (width 0.12)) (fp_line (start 0 1.61) (end -1.5 1.61) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.61) (end 1.5 -1.61) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.61) (end -2.925 -1.61) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.5) (end 1.5 -1.5) (layer F.Fab) (width 0.1)) (fp_line (start 1.5 -1.5) (end 1.5 1.5) (layer F.Fab) (width 0.1)) (fp_line (start 1.5 1.5) (end -1.5 1.5) (layer F.Fab) (width 0.1)) (fp_line (start -1.5 1.5) (end -1.5 -0.75) (layer F.Fab) (width 0.1)) (fp_line (start -1.5 -0.75) (end -0.75 -1.5) (layer F.Fab) (width 0.1)) (fp_line (start -3.18 -1.75) (end -3.18 1.75) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.18 1.75) (end 3.18 1.75) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.18 1.75) (end 3.18 -1.75) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.18 -1.75) (end -3.18 -1.75) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.75 0.75) (thickness 0.11))) ) (pad 8 smd roundrect (at 2.1125 -0.975 270) (size 1.625 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +5V)) (pad 7 smd roundrect (at 2.1125 -0.325 270) (size 1.625 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 34 FORCE_SENSOR_ADC)) (pad 6 smd roundrect (at 2.1125 0.325 270) (size 1.625 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 37 "Net-(R8-Pad1)")) (pad 5 smd roundrect (at 2.1125 0.975 270) (size 1.625 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 33 "Net-(JP4-Pad3)")) (pad 4 smd roundrect (at -2.1125 0.975 270) (size 1.625 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 3 smd roundrect (at -2.1125 0.325 270) (size 1.625 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 48 FORCE_SENSOR_IN)) (pad 2 smd roundrect (at -2.1125 -0.325 270) (size 1.625 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 32 "Net-(JP4-Pad2)")) (pad 1 smd roundrect (at -2.1125 -0.975 270) (size 1.625 0.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 32 "Net-(JP4-Pad2)")) (model ${KISYS3DMOD}/Package_SO.3dshapes/MSOP-8_3x3mm_P0.65mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_QFP:TQFP-32_7x7mm_P0.8mm (layer F.Cu) (tedit 5A02F146) (tstamp 60936FD9) (at 130.81 100.076) (descr "32-Lead Plastic Thin Quad Flatpack (PT) - 7x7x1.0 mm Body, 2.00 mm [TQFP] (see Microchip Packaging Specification 00000049BS.pdf)") (tags "QFP 0.8") (path /609A1F88) (attr smd) (fp_text reference U1 (at 0 -6.05) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value ATmega328P-AU (at 0 6.05) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.5 -3.5) (end 3.5 -3.5) (layer F.Fab) (width 0.15)) (fp_line (start 3.5 -3.5) (end 3.5 3.5) (layer F.Fab) (width 0.15)) (fp_line (start 3.5 3.5) (end -3.5 3.5) (layer F.Fab) (width 0.15)) (fp_line (start -3.5 3.5) (end -3.5 -2.5) (layer F.Fab) (width 0.15)) (fp_line (start -3.5 -2.5) (end -2.5 -3.5) (layer F.Fab) (width 0.15)) (fp_line (start -5.3 -5.3) (end -5.3 5.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.3 -5.3) (end 5.3 5.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -5.3 -5.3) (end 5.3 -5.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -5.3 5.3) (end 5.3 5.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.625 -3.625) (end -3.625 -3.4) (layer F.SilkS) (width 0.15)) (fp_line (start 3.625 -3.625) (end 3.625 -3.3) (layer F.SilkS) (width 0.15)) (fp_line (start 3.625 3.625) (end 3.625 3.3) (layer F.SilkS) (width 0.15)) (fp_line (start -3.625 3.625) (end -3.625 3.3) (layer F.SilkS) (width 0.15)) (fp_line (start -3.625 -3.625) (end -3.3 -3.625) (layer F.SilkS) (width 0.15)) (fp_line (start -3.625 3.625) (end -3.3 3.625) (layer F.SilkS) (width 0.15)) (fp_line (start 3.625 3.625) (end 3.3 3.625) (layer F.SilkS) (width 0.15)) (fp_line (start 3.625 -3.625) (end 3.3 -3.625) (layer F.SilkS) (width 0.15)) (fp_line (start -3.625 -3.4) (end -5.05 -3.4) (layer F.SilkS) (width 0.15)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 32 smd rect (at -2.8 -4.25 90) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 15 ENC_A)) (pad 31 smd rect (at -2 -4.25 90) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 8 UART_TX)) (pad 30 smd rect (at -1.2 -4.25 90) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 7 UART_RX)) (pad 29 smd rect (at -0.4 -4.25 90) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 6 RSTn)) (pad 28 smd rect (at 0.4 -4.25 90) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 26 SCL)) (pad 27 smd rect (at 1.2 -4.25 90) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 25 SDA)) (pad 26 smd rect (at 2 -4.25 90) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 30 STP_EN)) (pad 25 smd rect (at 2.8 -4.25 90) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 29 STP_STEP)) (pad 24 smd rect (at 4.25 -2.8) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 28 STP_DIR)) (pad 23 smd rect (at 4.25 -2) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 34 FORCE_SENSOR_ADC)) (pad 22 smd rect (at 4.25 -1.2) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 27 "Net-(U1-Pad22)")) (pad 21 smd rect (at 4.25 -0.4) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad 20 smd rect (at 4.25 0.4) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 31 "Net-(C3-Pad1)")) (pad 19 smd rect (at 4.25 1.2) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 39 "Net-(U1-Pad19)")) (pad 18 smd rect (at 4.25 2) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 23 AVCC)) (pad 17 smd rect (at 4.25 2.8) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 11 SCK)) (pad 16 smd rect (at 2.8 4.25 90) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 9 MISO)) (pad 15 smd rect (at 2 4.25 90) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 10 MOSI)) (pad 14 smd rect (at 1.2 4.25 90) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 40 LED1)) (pad 13 smd rect (at 0.4 4.25 90) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 17 ENC_Z)) (pad 12 smd rect (at -0.4 4.25 90) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 35 LASER_GATE)) (pad 11 smd rect (at -1.2 4.25 90) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 12 END_STOP2)) (pad 10 smd rect (at -2 4.25 90) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 18 END_STOP1)) (pad 9 smd rect (at -2.8 4.25 90) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 14 CONTACT_2)) (pad 8 smd rect (at -4.25 2.8) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 49 "Net-(R10-Pad2)")) (pad 7 smd rect (at -4.25 2) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 50 "Net-(R10-Pad1)")) (pad 6 smd rect (at -4.25 1.2) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 2 +5V)) (pad 5 smd rect (at -4.25 0.4) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad 4 smd rect (at -4.25 -0.4) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 2 +5V)) (pad 3 smd rect (at -4.25 -1.2) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad 2 smd rect (at -4.25 -2) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 13 CONTACT_1)) (pad 1 smd rect (at -4.25 -2.8) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 16 ENC_B)) (model ${KISYS3DMOD}/Package_QFP.3dshapes/TQFP-32_7x7mm_P0.8mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK (layer F.Cu) (tedit 5C2A8900) (tstamp 60936FA2) (at 128.016 89.916 180) (descr http://www.alps.com/prod/info/E/HTML/Tact/SurfaceMount/SKRK/SKRKAHE020.html) (tags "SMD SMT button") (path /609A1FCC) (attr smd) (fp_text reference SW1 (at 0 -2.54) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value SW_Push (at 0 2.5) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.07 -1.57) (end 2.07 -1.57) (layer F.SilkS) (width 0.12)) (fp_line (start 2.07 1.27) (end 2.07 1.57) (layer F.SilkS) (width 0.12)) (fp_line (start 2.07 1.57) (end -2.07 1.57) (layer F.SilkS) (width 0.12)) (fp_line (start -2.07 -1.27) (end -2.07 -1.57) (layer F.SilkS) (width 0.12)) (fp_circle (center 0 0) (end 1 0) (layer F.Fab) (width 0.1)) (fp_line (start -2.75 -1.7) (end 2.75 -1.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.75 -1.7) (end 2.75 1.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.75 1.7) (end -2.75 1.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.75 1.7) (end -2.75 -1.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.95 1.45) (end -1.95 1.45) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 1.45) (end -1.95 -1.45) (layer F.Fab) (width 0.1)) (fp_line (start -1.95 -1.45) (end 1.95 -1.45) (layer F.Fab) (width 0.1)) (fp_line (start 1.95 -1.45) (end 1.95 1.45) (layer F.Fab) (width 0.1)) (fp_line (start -2.07 1.57) (end -2.07 1.27) (layer F.SilkS) (width 0.12)) (fp_line (start 2.07 -1.57) (end 2.07 -1.27) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 1 smd roundrect (at -2.1 0 180) (size 0.8 2) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 6 RSTn)) (pad 2 smd roundrect (at 2.1 0 180) (size 0.8 2) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Button_Switch_SMD.3dshapes/SW_Push_SPST_NO_Alps_SKRK.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Potentiometer_SMD:Potentiometer_Bourns_3314J_Vertical (layer F.Cu) (tedit 5A81E1D7) (tstamp 60936F8C) (at 147.828 126.492 90) (descr "Potentiometer, vertical, Bourns 3314J, http://www.bourns.com/docs/Product-Datasheets/3314.pdf") (tags "Potentiometer vertical Bourns 3314J") (path /60A4A1AA/60A8E422) (attr smd) (fp_text reference RV2 (at -4.064 0 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value R_POT_TRIM (at 0 4.25 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 1 0) (layer F.Fab) (width 0.1)) (fp_line (start -2.25 -2.25) (end -2.25 2.25) (layer F.Fab) (width 0.1)) (fp_line (start -2.25 2.25) (end 2.25 2.25) (layer F.Fab) (width 0.1)) (fp_line (start 2.25 2.25) (end 2.25 -2.25) (layer F.Fab) (width 0.1)) (fp_line (start 2.25 -2.25) (end -2.25 -2.25) (layer F.Fab) (width 0.1)) (fp_line (start 0 0.99) (end 0.001 -0.989) (layer F.Fab) (width 0.1)) (fp_line (start 0 0.99) (end 0.001 -0.989) (layer F.Fab) (width 0.1)) (fp_line (start 2.04 -2.37) (end 2.37 -2.37) (layer F.SilkS) (width 0.12)) (fp_line (start -2.37 -2.37) (end -2.039 -2.37) (layer F.SilkS) (width 0.12)) (fp_line (start -0.259 -2.37) (end 0.26 -2.37) (layer F.SilkS) (width 0.12)) (fp_line (start -2.37 2.37) (end -1.24 2.37) (layer F.SilkS) (width 0.12)) (fp_line (start 1.24 2.37) (end 2.37 2.37) (layer F.SilkS) (width 0.12)) (fp_line (start -2.37 -2.37) (end -2.37 2.37) (layer F.SilkS) (width 0.12)) (fp_line (start 2.37 -2.37) (end 2.37 2.37) (layer F.SilkS) (width 0.12)) (fp_line (start -2.5 -3.25) (end -2.5 3.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.5 3.25) (end 2.5 3.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.5 3.25) (end 2.5 -3.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.5 -3.25) (end -2.5 -3.25) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 -1.7 90) (layer F.Fab) (effects (font (size 0.63 0.63) (thickness 0.15))) ) (pad 3 smd rect (at -1.15 -2 90) (size 1.3 2) (layers F.Cu F.Paste F.Mask) (net 38 "Net-(R9-Pad1)")) (pad 2 smd rect (at 0 2 90) (size 2 2) (layers F.Cu F.Paste F.Mask) (net 34 FORCE_SENSOR_ADC)) (pad 1 smd rect (at 1.15 -2 90) (size 1.3 2) (layers F.Cu F.Paste F.Mask) (net 34 FORCE_SENSOR_ADC)) (model ${KISYS3DMOD}/Potentiometer_SMD.3dshapes/Potentiometer_Bourns_3314J_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Potentiometer_SMD:Potentiometer_Bourns_3314J_Vertical (layer F.Cu) (tedit 5A81E1D7) (tstamp 60936F72) (at 139.7 120.396 180) (descr "Potentiometer, vertical, Bourns 3314J, http://www.bourns.com/docs/Product-Datasheets/3314.pdf") (tags "Potentiometer vertical Bourns 3314J") (path /60A4A1AA/60A50680) (attr smd) (fp_text reference RV1 (at 0 -4.25) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value R_POT_TRIM (at 0 4.25) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 1 0) (layer F.Fab) (width 0.1)) (fp_line (start -2.25 -2.25) (end -2.25 2.25) (layer F.Fab) (width 0.1)) (fp_line (start -2.25 2.25) (end 2.25 2.25) (layer F.Fab) (width 0.1)) (fp_line (start 2.25 2.25) (end 2.25 -2.25) (layer F.Fab) (width 0.1)) (fp_line (start 2.25 -2.25) (end -2.25 -2.25) (layer F.Fab) (width 0.1)) (fp_line (start 0 0.99) (end 0.001 -0.989) (layer F.Fab) (width 0.1)) (fp_line (start 0 0.99) (end 0.001 -0.989) (layer F.Fab) (width 0.1)) (fp_line (start 2.04 -2.37) (end 2.37 -2.37) (layer F.SilkS) (width 0.12)) (fp_line (start -2.37 -2.37) (end -2.039 -2.37) (layer F.SilkS) (width 0.12)) (fp_line (start -0.259 -2.37) (end 0.26 -2.37) (layer F.SilkS) (width 0.12)) (fp_line (start -2.37 2.37) (end -1.24 2.37) (layer F.SilkS) (width 0.12)) (fp_line (start 1.24 2.37) (end 2.37 2.37) (layer F.SilkS) (width 0.12)) (fp_line (start -2.37 -2.37) (end -2.37 2.37) (layer F.SilkS) (width 0.12)) (fp_line (start 2.37 -2.37) (end 2.37 2.37) (layer F.SilkS) (width 0.12)) (fp_line (start -2.5 -3.25) (end -2.5 3.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.5 3.25) (end 2.5 3.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.5 3.25) (end 2.5 -3.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.5 -3.25) (end -2.5 -3.25) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 -1.7) (layer F.Fab) (effects (font (size 0.63 0.63) (thickness 0.15))) ) (pad 3 smd rect (at -1.15 -2 180) (size 1.3 2) (layers F.Cu F.Paste F.Mask) (net 36 "Net-(R7-Pad2)")) (pad 2 smd rect (at 0 2 180) (size 2 2) (layers F.Cu F.Paste F.Mask) (net 36 "Net-(R7-Pad2)")) (pad 1 smd rect (at 1.15 -2 180) (size 1.3 2) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (model ${KISYS3DMOD}/Potentiometer_SMD.3dshapes/Potentiometer_Bourns_3314J_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer F.Cu) (tedit 5F68FEEE) (tstamp 60936F58) (at 143.256 126.492 90) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /60A4A1AA/60A706BD) (attr smd) (fp_text reference R9 (at -3.048 0 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value R (at 0 1.65 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 1 0 90) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.208333) (net 37 "Net-(R8-Pad1)")) (pad 1 smd roundrect (at -1 0 90) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.208333) (net 38 "Net-(R9-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer F.Cu) (tedit 5F68FEEE) (tstamp 60936F47) (at 140.716 126.492 270) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /60A4A1AA/60A6F52E) (attr smd) (fp_text reference R8 (at 3.048 0 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value R (at 0 1.65 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 1 0 270) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.208333) (net 1 GND)) (pad 1 smd roundrect (at -1 0 270) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.208333) (net 37 "Net-(R8-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer F.Cu) (tedit 5F68FEEE) (tstamp 60936F36) (at 137.668 115.824 180) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /60A4A1AA/60A50679) (attr smd) (fp_text reference R7 (at 0 1.524) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value R (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 1 0 180) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.208333) (net 36 "Net-(R7-Pad2)")) (pad 1 smd roundrect (at -1 0 180) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.208333) (net 48 FORCE_SENSOR_IN)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer F.Cu) (tedit 5F68FEEE) (tstamp 60936F25) (at 154.94 118.872 270) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /609B04CE) (attr smd) (fp_text reference R3 (at 0 -1.65 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value R (at 0 1.65 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 1 0 270) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.208333) (net 24 "Net-(Q1-Pad3)")) (pad 1 smd roundrect (at -1 0 270) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.208333) (net 47 LASER_OUT)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer F.Cu) (tedit 5F68FEEE) (tstamp 60936F14) (at 157.988 121.936) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /609B04C3) (attr smd) (fp_text reference R2 (at 0 2.016) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10k (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 1 0) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.208333) (net 1 GND)) (pad 1 smd roundrect (at -1 0) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.208333) (net 35 LASER_GATE)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:SOT-23 (layer F.Cu) (tedit 5A02FF57) (tstamp 60936EF3) (at 157.988 118.872 90) (descr "SOT-23, Standard") (tags SOT-23) (path /609B04B6) (attr smd) (fp_text reference Q1 (at 0 -2.5 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 2N7002K (at 0 2.5 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.7 -0.95) (end -0.7 1.5) (layer F.Fab) (width 0.1)) (fp_line (start -0.15 -1.52) (end 0.7 -1.52) (layer F.Fab) (width 0.1)) (fp_line (start -0.7 -0.95) (end -0.15 -1.52) (layer F.Fab) (width 0.1)) (fp_line (start 0.7 -1.52) (end 0.7 1.52) (layer F.Fab) (width 0.1)) (fp_line (start -0.7 1.52) (end 0.7 1.52) (layer F.Fab) (width 0.1)) (fp_line (start 0.76 1.58) (end 0.76 0.65) (layer F.SilkS) (width 0.12)) (fp_line (start 0.76 -1.58) (end 0.76 -0.65) (layer F.SilkS) (width 0.12)) (fp_line (start -1.7 -1.75) (end 1.7 -1.75) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.7 -1.75) (end 1.7 1.75) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.7 1.75) (end -1.7 1.75) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.7 1.75) (end -1.7 -1.75) (layer F.CrtYd) (width 0.05)) (fp_line (start 0.76 -1.58) (end -1.4 -1.58) (layer F.SilkS) (width 0.12)) (fp_line (start 0.76 1.58) (end -0.7 1.58) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.075))) ) (pad 3 smd rect (at 1 0 90) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask) (net 24 "Net-(Q1-Pad3)")) (pad 2 smd rect (at -1 0.95 90) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask) (net 1 GND)) (pad 1 smd rect (at -1 -0.95 90) (size 0.9 0.8) (layers F.Cu F.Paste F.Mask) (net 35 LASER_GATE)) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-23.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder (layer F.Cu) (tedit 5F68FEEE) (tstamp 60936EB6) (at 138.684 103.378) (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "resistor handsolder") (path /609A2025) (attr smd) (fp_text reference L1 (at 0 -1.65) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10u (at 0 1.65) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.227064 0.735) (end 0.227064 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 0.95) (end -1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.85 -0.95) (end 1.85 -0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 -0.95) (end 1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.85 0.95) (end -1.85 0.95) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 1 0) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.208333) (net 2 +5V)) (pad 1 smd roundrect (at -1 0) (size 1.2 1.4) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.208333) (net 23 AVCC)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm (layer F.Cu) (tedit 5B391EB7) (tstamp 60936EA5) (at 151.384 120.396 90) (descr "SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, open") (tags "solder jumper open") (path /60A4A1AA/60A67FC5) (attr virtual) (fp_text reference JP4 (at 0 -1.8 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value SolderJumper_3_Open (at 0 1.9 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1.2 1.2) (end -0.9 1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.5 1.5) (end -0.9 1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.2 1.2) (end -1.5 1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -2.05 0.3) (end -2.05 -0.3) (layer F.SilkS) (width 0.12)) (fp_line (start 1.4 1) (end -1.4 1) (layer F.SilkS) (width 0.12)) (fp_line (start 2.05 -0.3) (end 2.05 0.3) (layer F.SilkS) (width 0.12)) (fp_line (start -1.4 -1) (end 1.4 -1) (layer F.SilkS) (width 0.12)) (fp_line (start -2.3 -1.25) (end 2.3 -1.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.3 -1.25) (end -2.3 1.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.3 1.25) (end 2.3 -1.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.3 1.25) (end -2.3 1.25) (layer F.CrtYd) (width 0.05)) (fp_arc (start -1.35 -0.3) (end -1.35 -1) (angle -90) (layer F.SilkS) (width 0.12)) (fp_arc (start -1.35 0.3) (end -2.05 0.3) (angle -90) (layer F.SilkS) (width 0.12)) (fp_arc (start 1.35 0.3) (end 1.35 1) (angle -90) (layer F.SilkS) (width 0.12)) (fp_arc (start 1.35 -0.3) (end 2.05 -0.3) (angle -90) (layer F.SilkS) (width 0.12)) (pad 2 smd rect (at 0 0 90) (size 1 1.5) (layers F.Cu F.Mask) (net 32 "Net-(JP4-Pad2)")) (pad 3 smd custom (at 1.3 0 90) (size 1 0.5) (layers F.Cu F.Mask) (net 33 "Net-(JP4-Pad3)") (zone_connect 2) (options (clearance outline) (anchor rect)) (primitives (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0)) (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0)) (gr_poly (pts (xy -0.55 -0.75) (xy 0 -0.75) (xy 0 0.75) (xy -0.55 0.75)) (width 0)) )) (pad 1 smd custom (at -1.3 0 90) (size 1 0.5) (layers F.Cu F.Mask) (net 34 FORCE_SENSOR_ADC) (zone_connect 2) (options (clearance outline) (anchor rect)) (primitives (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0)) (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0)) (gr_poly (pts (xy 0.55 -0.75) (xy 0 -0.75) (xy 0 0.75) (xy 0.55 0.75)) (width 0)) )) ) (module Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm (layer F.Cu) (tedit 5B391E66) (tstamp 60936E8F) (at 166.26 91.016 270) (descr "SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, open") (tags "solder jumper open") (path /60A29004/609438AB) (attr virtual) (fp_text reference JP3 (at 0 -1.8 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value SolderJumper_2_Open (at 0 1.9 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1.4 0.3) (end -1.4 -0.3) (layer F.SilkS) (width 0.12)) (fp_line (start 0.7 1) (end -0.7 1) (layer F.SilkS) (width 0.12)) (fp_line (start 1.4 -0.3) (end 1.4 0.3) (layer F.SilkS) (width 0.12)) (fp_line (start -0.7 -1) (end 0.7 -1) (layer F.SilkS) (width 0.12)) (fp_line (start -1.65 -1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.65 -1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.65 1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.65 1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05)) (fp_arc (start -0.7 -0.3) (end -0.7 -1) (angle -90) (layer F.SilkS) (width 0.12)) (fp_arc (start -0.7 0.3) (end -1.4 0.3) (angle -90) (layer F.SilkS) (width 0.12)) (fp_arc (start 0.7 0.3) (end 0.7 1) (angle -90) (layer F.SilkS) (width 0.12)) (fp_arc (start 0.7 -0.3) (end 1.4 -0.3) (angle -90) (layer F.SilkS) (width 0.12)) (pad 2 smd custom (at 0.65 0 270) (size 1 0.5) (layers F.Cu F.Mask) (net 19 "Net-(A1-Pad12)") (zone_connect 2) (options (clearance outline) (anchor rect)) (primitives (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0)) (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0)) (gr_poly (pts (xy 0 -0.75) (xy -0.5 -0.75) (xy -0.5 0.75) (xy 0 0.75)) (width 0)) )) (pad 1 smd custom (at -0.65 0 270) (size 1 0.5) (layers F.Cu F.Mask) (net 2 +5V) (zone_connect 2) (options (clearance outline) (anchor rect)) (primitives (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0)) (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0)) (gr_poly (pts (xy 0 -0.75) (xy 0.5 -0.75) (xy 0.5 0.75) (xy 0 0.75)) (width 0)) )) ) (module Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm (layer F.Cu) (tedit 5B391E66) (tstamp 60936E7D) (at 169.26 91.016 270) (descr "SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, open") (tags "solder jumper open") (path /60A29004/60943563) (attr virtual) (fp_text reference JP2 (at 0 -1.8 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value SolderJumper_2_Open (at 0 1.9 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1.4 0.3) (end -1.4 -0.3) (layer F.SilkS) (width 0.12)) (fp_line (start 0.7 1) (end -0.7 1) (layer F.SilkS) (width 0.12)) (fp_line (start 1.4 -0.3) (end 1.4 0.3) (layer F.SilkS) (width 0.12)) (fp_line (start -0.7 -1) (end 0.7 -1) (layer F.SilkS) (width 0.12)) (fp_line (start -1.65 -1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.65 -1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.65 1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.65 1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05)) (fp_arc (start -0.7 -0.3) (end -0.7 -1) (angle -90) (layer F.SilkS) (width 0.12)) (fp_arc (start -0.7 0.3) (end -1.4 0.3) (angle -90) (layer F.SilkS) (width 0.12)) (fp_arc (start 0.7 0.3) (end 0.7 1) (angle -90) (layer F.SilkS) (width 0.12)) (fp_arc (start 0.7 -0.3) (end 1.4 -0.3) (angle -90) (layer F.SilkS) (width 0.12)) (pad 2 smd custom (at 0.65 0 270) (size 1 0.5) (layers F.Cu F.Mask) (net 20 "Net-(A1-Pad11)") (zone_connect 2) (options (clearance outline) (anchor rect)) (primitives (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0)) (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0)) (gr_poly (pts (xy 0 -0.75) (xy -0.5 -0.75) (xy -0.5 0.75) (xy 0 0.75)) (width 0)) )) (pad 1 smd custom (at -0.65 0 270) (size 1 0.5) (layers F.Cu F.Mask) (net 2 +5V) (zone_connect 2) (options (clearance outline) (anchor rect)) (primitives (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0)) (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0)) (gr_poly (pts (xy 0 -0.75) (xy 0.5 -0.75) (xy 0.5 0.75) (xy 0 0.75)) (width 0)) )) ) (module Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm (layer F.Cu) (tedit 5B391E66) (tstamp 60936E6B) (at 172.26 91.016 270) (descr "SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, open") (tags "solder jumper open") (path /60A29004/60942B5D) (attr virtual) (fp_text reference JP1 (at 0 -1.8 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value SolderJumper_2_Open (at 0 1.9 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1.4 0.3) (end -1.4 -0.3) (layer F.SilkS) (width 0.12)) (fp_line (start 0.7 1) (end -0.7 1) (layer F.SilkS) (width 0.12)) (fp_line (start 1.4 -0.3) (end 1.4 0.3) (layer F.SilkS) (width 0.12)) (fp_line (start -0.7 -1) (end 0.7 -1) (layer F.SilkS) (width 0.12)) (fp_line (start -1.65 -1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.65 -1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.65 1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.65 1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05)) (fp_arc (start -0.7 -0.3) (end -0.7 -1) (angle -90) (layer F.SilkS) (width 0.12)) (fp_arc (start -0.7 0.3) (end -1.4 0.3) (angle -90) (layer F.SilkS) (width 0.12)) (fp_arc (start 0.7 0.3) (end 0.7 1) (angle -90) (layer F.SilkS) (width 0.12)) (fp_arc (start 0.7 -0.3) (end 1.4 -0.3) (angle -90) (layer F.SilkS) (width 0.12)) (pad 2 smd custom (at 0.65 0 270) (size 1 0.5) (layers F.Cu F.Mask) (net 21 "Net-(A1-Pad10)") (zone_connect 2) (options (clearance outline) (anchor rect)) (primitives (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0)) (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0)) (gr_poly (pts (xy 0 -0.75) (xy -0.5 -0.75) (xy -0.5 0.75) (xy 0 0.75)) (width 0)) )) (pad 1 smd custom (at -0.65 0 270) (size 1 0.5) (layers F.Cu F.Mask) (net 2 +5V) (zone_connect 2) (options (clearance outline) (anchor rect)) (primitives (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0)) (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0)) (gr_poly (pts (xy 0 -0.75) (xy 0.5 -0.75) (xy 0.5 0.75) (xy 0 0.75)) (width 0)) )) ) (module Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 60936CF4) (at 146.812 120.396 90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /60A4A1AA/60A7A5D1) (attr smd) (fp_text reference C13 (at 3.556 0 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.146267 -0.51) (end 0.146267 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.146267 0.51) (end 0.146267 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.8625 0 90) (size 1.075 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.8625 0 90) (size 1.075 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +5V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 60936CE3) (at 148.844 120.396 90) (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /60A4A1AA/60A7AFCD) (attr smd) (fp_text reference C12 (at 3.556 0 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10u (at 0 1.68 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1 0.625) (end -1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start -1 -0.625) (end 1 -0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 -0.625) (end 1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start 1 0.625) (end -1 0.625) (layer F.Fab) (width 0.1)) (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -0.261252 0.735) (end 0.261252 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.88 0.98) (end -1.88 -0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.88 -0.98) (end 1.88 -0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.88 -0.98) (end 1.88 0.98) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.88 0.98) (end -1.88 0.98) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.5 0.5) (thickness 0.08))) ) (pad 2 smd roundrect (at 1.0375 0 90) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.212766) (net 1 GND)) (pad 1 smd roundrect (at -1.0375 0 90) (size 1.175 1.45) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.212766) (net 2 +5V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:CP_Elec_6.3x7.7 (layer F.Cu) (tedit 5BCA39D0) (tstamp 60936CD2) (at 169.672 113.792 180) (descr "SMD capacitor, aluminum electrolytic, Nichicon, 6.3x7.7mm") (tags "capacitor electrolytic") (path /60A29004/6093C7EA) (attr smd) (fp_text reference C11 (at 0 -4.35) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value CP (at 0 4.35) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 3.15 0) (layer F.Fab) (width 0.1)) (fp_line (start 3.3 -3.3) (end 3.3 3.3) (layer F.Fab) (width 0.1)) (fp_line (start -2.3 -3.3) (end 3.3 -3.3) (layer F.Fab) (width 0.1)) (fp_line (start -2.3 3.3) (end 3.3 3.3) (layer F.Fab) (width 0.1)) (fp_line (start -3.3 -2.3) (end -3.3 2.3) (layer F.Fab) (width 0.1)) (fp_line (start -3.3 -2.3) (end -2.3 -3.3) (layer F.Fab) (width 0.1)) (fp_line (start -3.3 2.3) (end -2.3 3.3) (layer F.Fab) (width 0.1)) (fp_line (start -2.704838 -1.33) (end -2.074838 -1.33) (layer F.Fab) (width 0.1)) (fp_line (start -2.389838 -1.645) (end -2.389838 -1.015) (layer F.Fab) (width 0.1)) (fp_line (start 3.41 3.41) (end 3.41 1.06) (layer F.SilkS) (width 0.12)) (fp_line (start 3.41 -3.41) (end 3.41 -1.06) (layer F.SilkS) (width 0.12)) (fp_line (start -2.345563 -3.41) (end 3.41 -3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -2.345563 3.41) (end 3.41 3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -3.41 2.345563) (end -3.41 1.06) (layer F.SilkS) (width 0.12)) (fp_line (start -3.41 -2.345563) (end -3.41 -1.06) (layer F.SilkS) (width 0.12)) (fp_line (start -3.41 -2.345563) (end -2.345563 -3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -3.41 2.345563) (end -2.345563 3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -4.4375 -1.8475) (end -3.65 -1.8475) (layer F.SilkS) (width 0.12)) (fp_line (start -4.04375 -2.24125) (end -4.04375 -1.45375) (layer F.SilkS) (width 0.12)) (fp_line (start 3.55 -3.55) (end 3.55 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.55 -1.05) (end 4.7 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.7 -1.05) (end 4.7 1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.7 1.05) (end 3.55 1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.55 1.05) (end 3.55 3.55) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.4 3.55) (end 3.55 3.55) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.4 -3.55) (end 3.55 -3.55) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.55 2.4) (end -2.4 3.55) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.55 -2.4) (end -2.4 -3.55) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.55 -2.4) (end -3.55 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.55 1.05) (end -3.55 2.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.55 -1.05) (end -4.7 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.7 -1.05) (end -4.7 1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.7 1.05) (end -3.55 1.05) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 2 smd roundrect (at 2.7 0 180) (size 3.5 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625) (net 1 GND)) (pad 1 smd roundrect (at -2.7 0 180) (size 3.5 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625) (net 3 +12V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/CP_Elec_6.3x7.7.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 60936CAA) (at 138.557 105.41) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /609A2034) (attr smd) (fp_text reference C10 (at 0 1.524) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100nF (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.146267 -0.51) (end 0.146267 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.146267 0.51) (end 0.146267 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 23 AVCC)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 60936C99) (at 132.08 88.9 90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /609A1FDB) (attr smd) (fp_text reference C9 (at 3.048 0 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.146267 -0.51) (end 0.146267 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.146267 0.51) (end 0.146267 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.8625 0 90) (size 1.075 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.8625 0 90) (size 1.075 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 6 RSTn)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 60936C77) (at 123.952 98.806 90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /609A1FF9) (attr smd) (fp_text reference C7 (at 0 -1.43 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100n (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.146267 -0.51) (end 0.146267 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.146267 0.51) (end 0.146267 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.8625 0 90) (size 1.075 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.8625 0 90) (size 1.075 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +5V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 60936C66) (at 121.92 98.806 90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /609A1FFF) (attr smd) (fp_text reference C6 (at 0 -1.43 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 4.7uF (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.146267 -0.51) (end 0.146267 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.146267 0.51) (end 0.146267 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.8625 0 90) (size 1.075 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.8625 0 90) (size 1.075 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +5V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 60936C33) (at 137.668 100.076 90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /609A1F50) (attr smd) (fp_text reference C3 (at 0 -1.43 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 100nF (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.146267 -0.51) (end 0.146267 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.146267 0.51) (end 0.146267 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer F.CrtYd) (width 0.05)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.8625 0 90) (size 1.075 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (pad 1 smd roundrect (at -0.8625 0 90) (size 1.075 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 31 "Net-(C3-Pad1)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module P78E05-1000:CONV_P78E05-1000 (layer F.Cu) (tedit 5FD620B5) (tstamp 608EC9DD) (at 148.26 79.516) (path /608EAC04) (fp_text reference PS1 (at -2.925 -6.735) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.015))) ) (fp_text value P78E05-1000 (at 3.96 3.865) (layer F.Fab) (effects (font (size 1 1) (thickness 0.015))) ) (fp_circle (center -2.54 3) (end -2.44 3) (layer F.Fab) (width 0.2)) (fp_circle (center -2.54 3) (end -2.44 3) (layer F.SilkS) (width 0.2)) (fp_line (start 6.05 2.55) (end -6.05 2.55) (layer F.CrtYd) (width 0.05)) (fp_line (start 6.05 -5.95) (end 6.05 2.55) (layer F.CrtYd) (width 0.05)) (fp_line (start -6.05 -5.95) (end 6.05 -5.95) (layer F.CrtYd) (width 0.05)) (fp_line (start -6.05 2.55) (end -6.05 -5.95) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.8 2.3) (end -5.8 2.3) (layer F.SilkS) (width 0.127)) (fp_line (start 5.8 -5.7) (end 5.8 2.3) (layer F.SilkS) (width 0.127)) (fp_line (start -5.8 -5.7) (end 5.8 -5.7) (layer F.SilkS) (width 0.127)) (fp_line (start -5.8 2.3) (end -5.8 -5.7) (layer F.SilkS) (width 0.127)) (fp_line (start 5.8 2.3) (end -5.8 2.3) (layer F.Fab) (width 0.127)) (fp_line (start 5.8 -5.7) (end 5.8 2.3) (layer F.Fab) (width 0.127)) (fp_line (start -5.8 -5.7) (end 5.8 -5.7) (layer F.Fab) (width 0.127)) (fp_line (start -5.8 2.3) (end -5.8 -5.7) (layer F.Fab) (width 0.127)) (pad 3 thru_hole circle (at 2.54 0) (size 1.508 1.508) (drill 1) (layers *.Cu *.Mask) (net 2 +5V)) (pad 2 thru_hole circle (at 0 0) (size 1.508 1.508) (drill 1) (layers *.Cu *.Mask) (net 1 GND)) (pad 1 thru_hole rect (at -2.54 0) (size 1.508 1.508) (drill 1) (layers *.Cu *.Mask) (net 3 +12V)) ) (module Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 5E783C3D) (at 156.21 79.756 90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /5E9A5DFC) (attr smd) (fp_text reference D1 (at 0 -1.43 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value LED (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.146267 0.51) (end 0.146267 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.146267 -0.51) (end 0.146267 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.8625 0 90) (size 1.075 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 4 "Net-(D1-Pad2)")) (pad 1 smd roundrect (at -0.8625 0 90) (size 1.075 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 608EC816) (at 149.86 83.566) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /60914C5F) (attr smd) (fp_text reference C2 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value "22u 10V" (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.146267 0.51) (end 0.146267 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.146267 -0.51) (end 0.146267 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.8625 0) (size 1.075 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +5V)) (pad 1 smd roundrect (at -0.8625 0) (size 1.075 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder (layer F.Cu) (tedit 5F68FEEF) (tstamp 608EC805) (at 146.05 83.566 180) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags "capacitor handsolder") (path /609040C0) (attr smd) (fp_text reference C1 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value "10u 35V" (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.65 0.73) (end -1.65 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.65 -0.73) (end 1.65 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.65 -0.73) (end 1.65 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.65 0.73) (end -1.65 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.146267 0.51) (end 0.146267 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.146267 -0.51) (end 0.146267 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.8625 0 180) (size 1.075 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 3 +12V)) (pad 1 smd roundrect (at -0.8625 0 180) (size 1.075 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 1 GND)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (gr_line (start 141.732 106.172) (end 141.732 96.52) (layer Edge.Cuts) (width 0.05) (tstamp 609C2D62)) (gr_line (start 154.94 106.172) (end 141.732 106.172) (layer Edge.Cuts) (width 0.05)) (gr_line (start 154.94 105.156) (end 154.94 106.172) (layer Edge.Cuts) (width 0.05)) (gr_line (start 154.94 94.996) (end 154.94 105.156) (layer Edge.Cuts) (width 0.05)) (gr_line (start 141.732 94.996) (end 154.94 94.996) (layer Edge.Cuts) (width 0.05)) (gr_line (start 141.732 96.52) (end 141.732 94.996) (layer Edge.Cuts) (width 0.05)) (gr_line (start 148.26 86.016) (end 148.26 81.016) (layer Dwgs.User) (width 0.15)) (gr_circle (center 148.26 101.016) (end 148.26 71.016) (layer Edge.Cuts) (width 0.05)) (via (at 123.444 103.632) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1)) (segment (start 123.952 97.9435) (end 123.952 96.52) (width 0.4064) (layer F.Cu) (net 1)) (via (at 123.952 96.52) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1)) (via (at 121.92 96.52) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1)) (segment (start 121.92 97.9435) (end 121.92 96.52) (width 0.4064) (layer F.Cu) (net 1)) (via (at 120.396 97.79) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1)) (segment (start 120.5495 97.9435) (end 120.396 97.79) (width 0.4064) (layer F.Cu) (net 1)) (segment (start 121.92 97.9435) (end 120.5495 97.9435) (width 0.4064) (layer F.Cu) (net 1)) (segment (start 124.8845 98.876) (end 123.952 97.9435) (width 0.4064) (layer F.Cu) (net 1)) (segment (start 126.56 98.876) (end 124.8845 98.876) (width 0.4064) (layer F.Cu) (net 1)) (segment (start 137.2055 99.676) (end 137.668 99.2135) (width 0.4064) (layer F.Cu) (net 1)) (segment (start 135.06 99.676) (end 137.2055 99.676) (width 0.4064) (layer F.Cu) (net 1)) (via (at 133.35 99.568) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1)) (segment (start 133.458 99.676) (end 133.35 99.568) (width 0.4064) (layer F.Cu) (net 1)) (segment (start 135.06 99.676) (end 133.458 99.676) (width 0.4064) (layer F.Cu) (net 1)) (via (at 138.938 99.06) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1)) (segment (start 138.7845 99.2135) (end 138.938 99.06) (width 0.4064) (layer F.Cu) (net 1)) (segment (start 137.668 99.2135) (end 138.7845 99.2135) (width 0.4064) (layer F.Cu) (net 1)) (via (at 137.668 97.79) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1)) (segment (start 137.668 99.2135) (end 137.668 97.79) (width 0.4064) (layer F.Cu) (net 1)) (via (at 139.319 106.807) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1)) (segment (start 139.4195 106.7065) (end 139.319 106.807) (width 0.4064) (layer F.Cu) (net 1)) (segment (start 139.4195 105.41) (end 139.4195 106.7065) (width 0.4064) (layer F.Cu) (net 1)) (via (at 140.716 105.41) (size 0.8) (drill 0.4) (layers F.Cu B.Cu) (net 1)) (segment (start 139.4195 105.41) (end 140.716 105.41) (width 0.4064) (layer F.Cu) (net 1)) (segment (start 123.9595 99.676) (end 123.952 99.6685) (width 0.4064) (layer F.Cu) (net 2)) (segment (start 126.56 99.676) (end 123.9595 99.676) (width 0.4064) (layer F.Cu) (net 2)) (segment (start 123.952 99.6685) (end 121.92 99.6685) (width 0.4064) (layer F.Cu) (net 2)) (segment (start 135.06 102.076) (end 137.128 102.076) (width 0.4064) (layer F.Cu) (net 23)) (segment (start 137.684 102.632) (end 137.684 103.378) (width 0.4064) (layer F.Cu) (net 23)) (segment (start 137.128 102.076) (end 137.684 102.632) (width 0.4064) (layer F.Cu) (net 23)) (segment (start 137.684 105.2725) (end 137.8215 105.41) (width 0.4064) (layer F.Cu) (net 23)) (segment (start 137.684 103.378) (end 137.684 105.2725) (width 0.4064) (layer F.Cu) (net 23)) (segment (start 137.2055 100.476) (end 137.668 100.9385) (width 0.4064) (layer F.Cu) (net 31)) (segment (start 135.06 100.476) (end 137.2055 100.476) (width 0.4064) (layer F.Cu) (net 31)) (segment (start 126.56 102.876) (end 125.47 102.876) (width 0.254) (layer F.Cu) (net 49)) (segment (start 125.47 102.876) (end 125.222 103.124) (width 0.254) (layer F.Cu) (net 49)) (segment (start 125.222 103.124) (end 125.222 104.394) (width 0.254) (layer F.Cu) (net 49)) (segment (start 124.784 104.832) (end 123.444 104.832) (width 0.254) (layer F.Cu) (net 49)) (segment (start 125.222 104.394) (end 124.784 104.832) (width 0.254) (layer F.Cu) (net 49)) (segment (start 120.85 104.832) (end 120.65 104.632) (width 0.254) (layer F.Cu) (net 49)) (segment (start 123.444 104.832) (end 120.85 104.832) (width 0.254) (layer F.Cu) (net 49)) (segment (start 123.444 102.432) (end 124.898 102.432) (width 0.254) (layer F.Cu) (net 50)) (segment (start 125.254 102.076) (end 126.56 102.076) (width 0.254) (layer F.Cu) (net 50)) (segment (start 124.898 102.432) (end 125.254 102.076) (width 0.254) (layer F.Cu) (net 50)) (segment (start 120.85 102.432) (end 120.65 102.632) (width 0.254) (layer F.Cu) (net 50)) (segment (start 123.444 102.432) (end 120.85 102.432) (width 0.254) (layer F.Cu) (net 50)) (zone (net 1) (net_name GND) (layer B.Cu) (tstamp 0) (hatch edge 0.508) (connect_pads (clearance 0.508)) (min_thickness 0.254) (fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508)) (polygon (pts (xy 180.848 135.382) (xy 116.332 134.112) (xy 117.602 69.85) (xy 180.086 69.85) ) ) (filled_polygon (pts (xy 150.401683 71.754271) (xy 152.531938 71.988666) (xy 154.639401 72.377934) (xy 156.712828 72.919998) (xy 158.741154 73.611967) (xy 160.71356 74.450149) (xy 162.61952 75.43007) (xy 164.448866 76.546504) (xy 166.191837 77.793493) (xy 167.839134 79.164384) (xy 169.381968 80.651863) (xy 170.812107 82.247994) (xy 172.121921 83.944259) (xy 173.304421 85.73161) (xy 174.353299 87.60051) (xy 175.262957 89.540988) (xy 176.028543 91.542689) (xy 176.645972 93.594935) (xy 177.111949 95.686775) (xy 177.423989 97.807049) (xy 177.580426 99.944444) (xy 177.580426 102.087556) (xy 177.423989 104.224951) (xy 177.111949 106.345225) (xy 176.645972 108.437065) (xy 176.028543 110.489311) (xy 175.262957 112.491012) (xy 174.353299 114.43149) (xy 173.304421 116.30039) (xy 172.121921 118.087741) (xy 170.812107 119.784006) (xy 169.381968 121.380137) (xy 167.839134 122.867616) (xy 166.191837 124.238507) (xy 164.448866 125.485496) (xy 162.61952 126.60193) (xy 160.71356 127.581851) (xy 158.741154 128.420033) (xy 156.712828 129.112002) (xy 154.639401 129.654066) (xy 152.531938 130.043334) (xy 150.401683 130.277729) (xy 148.26 130.356) (xy 146.118317 130.277729) (xy 143.988062 130.043334) (xy 141.880599 129.654066) (xy 139.807172 129.112002) (xy 137.778846 128.420033) (xy 135.80644 127.581851) (xy 133.90048 126.60193) (xy 132.071134 125.485496) (xy 130.328163 124.238507) (xy 128.680866 122.867616) (xy 127.138032 121.380137) (xy 126.56158 120.736777) (xy 130.425 120.736777) (xy 130.425 121.295223) (xy 130.533948 121.842939) (xy 130.747656 122.358876) (xy 131.057912 122.823207) (xy 131.452793 123.218088) (xy 131.917124 123.528344) (xy 132.433061 123.742052) (xy 132.980777 123.851) (xy 133.539223 123.851) (xy 134.086939 123.742052) (xy 134.602876 123.528344) (xy 135.067207 123.218088) (xy 135.462088 122.823207) (xy 135.772344 122.358876) (xy 135.986052 121.842939) (xy 136.095 121.295223) (xy 136.095 120.736777) (xy 160.425 120.736777) (xy 160.425 121.295223) (xy 160.533948 121.842939) (xy 160.747656 122.358876) (xy 161.057912 122.823207) (xy 161.452793 123.218088) (xy 161.917124 123.528344) (xy 162.433061 123.742052) (xy 162.980777 123.851) (xy 163.539223 123.851) (xy 164.086939 123.742052) (xy 164.602876 123.528344) (xy 165.067207 123.218088) (xy 165.462088 122.823207) (xy 165.772344 122.358876) (xy 165.986052 121.842939) (xy 166.095 121.295223) (xy 166.095 120.736777) (xy 165.986052 120.189061) (xy 165.772344 119.673124) (xy 165.462088 119.208793) (xy 165.067207 118.813912) (xy 164.602876 118.503656) (xy 164.086939 118.289948) (xy 163.539223 118.181) (xy 162.980777 118.181) (xy 162.433061 118.289948) (xy 161.917124 118.503656) (xy 161.452793 118.813912) (xy 161.057912 119.208793) (xy 160.747656 119.673124) (xy 160.533948 120.189061) (xy 160.425 120.736777) (xy 136.095 120.736777) (xy 135.986052 120.189061) (xy 135.772344 119.673124) (xy 135.462088 119.208793) (xy 135.067207 118.813912) (xy 134.602876 118.503656) (xy 134.086939 118.289948) (xy 133.539223 118.181) (xy 132.980777 118.181) (xy 132.433061 118.289948) (xy 131.917124 118.503656) (xy 131.452793 118.813912) (xy 131.057912 119.208793) (xy 130.747656 119.673124) (xy 130.533948 120.189061) (xy 130.425 120.736777) (xy 126.56158 120.736777) (xy 125.707893 119.784006) (xy 124.398079 118.087741) (xy 123.215579 116.30039) (xy 122.166701 114.43149) (xy 121.257043 112.491012) (xy 120.491457 110.489311) (xy 120.422468 110.26) (xy 125.651928 110.26) (xy 125.664188 110.384482) (xy 125.700498 110.50418) (xy 125.759463 110.614494) (xy 125.838815 110.711185) (xy 125.935506 110.790537) (xy 126.04582 110.849502) (xy 126.165518 110.885812) (xy 126.29 110.898072) (xy 126.75425 110.895) (xy 126.913 110.73625) (xy 126.913 108.887) (xy 125.81375 108.887) (xy 125.655 109.04575) (xy 125.651928 110.26) (xy 120.422468 110.26) (xy 119.874028 108.437065) (xy 119.611826 107.26) (xy 125.651928 107.26) (xy 125.655 108.47425) (xy 125.81375 108.633) (xy 126.913 108.633) (xy 126.913 106.78375) (xy 127.167 106.78375) (xy 127.167 108.633) (xy 127.187 108.633) (xy 127.187 108.887) (xy 127.167 108.887) (xy 127.167 110.73625) (xy 127.32575 110.895) (xy 127.79 110.898072) (xy 127.914482 110.885812) (xy 128.03418 110.849502) (xy 128.04 110.846391) (xy 128.04582 110.849502) (xy 128.165518 110.885812) (xy 128.29 110.898072) (xy 129.79 110.898072) (xy 129.914482 110.885812) (xy 130.03418 110.849502) (xy 130.04 110.846391) (xy 130.04582 110.849502) (xy 130.165518 110.885812) (xy 130.29 110.898072) (xy 131.79 110.898072) (xy 131.914482 110.885812) (xy 132.03418 110.849502) (xy 132.04 110.846391) (xy 132.04582 110.849502) (xy 132.165518 110.885812) (xy 132.29 110.898072) (xy 133.79 110.898072) (xy 133.914482 110.885812) (xy 134.03418 110.849502) (xy 134.04 110.846391) (xy 134.04582 110.849502) (xy 134.165518 110.885812) (xy 134.29 110.898072) (xy 135.79 110.898072) (xy 135.914482 110.885812) (xy 136.03418 110.849502) (xy 136.144494 110.790537) (xy 136.241185 110.711185) (xy 136.320537 110.614494) (xy 136.379502 110.50418) (xy 136.415812 110.384482) (xy 136.428072 110.26) (xy 136.428072 107.988) (xy 156.041928 107.988) (xy 156.054188 108.112482) (xy 156.090498 108.23218) (xy 156.149463 108.342494) (xy 156.228815 108.439185) (xy 156.325506 108.518537) (xy 156.43582 108.577502) (xy 156.555518 108.613812) (xy 156.68 108.626072) (xy 157.19425 108.623) (xy 157.353 108.46425) (xy 157.353 107.315) (xy 156.20375 107.315) (xy 156.045 107.47375) (xy 156.041928 107.988) (xy 136.428072 107.988) (xy 136.428072 107.26) (xy 136.415812 107.135518) (xy 136.379502 107.01582) (xy 136.320537 106.905506) (xy 136.241185 106.808815) (xy 136.144494 106.729463) (xy 136.03418 106.670498) (xy 135.914482 106.634188) (xy 135.79 106.621928) (xy 134.29 106.621928) (xy 134.165518 106.634188) (xy 134.04582 106.670498) (xy 134.04 106.673609) (xy 134.03418 106.670498) (xy 133.914482 106.634188) (xy 133.79 106.621928) (xy 132.29 106.621928) (xy 132.165518 106.634188) (xy 132.04582 106.670498) (xy 132.04 106.673609) (xy 132.03418 106.670498) (xy 131.914482 106.634188) (xy 131.79 106.621928) (xy 130.29 106.621928) (xy 130.165518 106.634188) (xy 130.04582 106.670498) (xy 130.04 106.673609) (xy 130.03418 106.670498) (xy 129.914482 106.634188) (xy 129.79 106.621928) (xy 128.29 106.621928) (xy 128.165518 106.634188) (xy 128.04582 106.670498) (xy 128.04 106.673609) (xy 128.03418 106.670498) (xy 127.914482 106.634188) (xy 127.79 106.621928) (xy 127.32575 106.625) (xy 127.167 106.78375) (xy 126.913 106.78375) (xy 126.75425 106.625) (xy 126.29 106.621928) (xy 126.165518 106.634188) (xy 126.04582 106.670498) (xy 125.935506 106.729463) (xy 125.838815 106.808815) (xy 125.759463 106.905506) (xy 125.700498 107.01582) (xy 125.664188 107.135518) (xy 125.651928 107.26) (xy 119.611826 107.26) (xy 119.408051 106.345225) (xy 119.096011 104.224951) (xy 118.939574 102.087556) (xy 118.939574 99.944444) (xy 119.096011 97.807049) (xy 119.408051 95.686775) (xy 119.561927 94.996) (xy 141.068807 94.996) (xy 141.072001 95.028429) (xy 141.072 96.552418) (xy 141.072001 96.552428) (xy 141.072 106.139581) (xy 141.068807 106.172) (xy 141.08155 106.301383) (xy 141.11929 106.425793) (xy 141.180575 106.54045) (xy 141.247443 106.621928) (xy 141.263052 106.640948) (xy 141.36355 106.723425) (xy 141.478207 106.78471) (xy 141.602617 106.82245) (xy 141.732 106.835193) (xy 141.764419 106.832) (xy 154.907581 106.832) (xy 154.94 106.835193) (xy 154.972419 106.832) (xy 155.069383 106.82245) (xy 155.193793 106.78471) (xy 155.30845 106.723425) (xy 155.408948 106.640948) (xy 155.491425 106.54045) (xy 155.55271 106.425793) (xy 155.564174 106.388) (xy 156.041928 106.388) (xy 156.045 106.90225) (xy 156.20375 107.061) (xy 157.353 107.061) (xy 157.353 105.91175) (xy 157.607 105.91175) (xy 157.607 107.061) (xy 157.627 107.061) (xy 157.627 107.315) (xy 157.607 107.315) (xy 157.607 108.46425) (xy 157.76575 108.623) (xy 158.28 108.626072) (xy 158.404482 108.613812) (xy 158.52418 108.577502) (xy 158.634494 108.518537) (xy 158.731185 108.439185) (xy 158.810537 108.342494) (xy 158.869502 108.23218) (xy 158.905812 108.112482) (xy 158.906643 108.104039) (xy 159.105241 108.302637) (xy 159.340273 108.45968) (xy 159.601426 108.567853) (xy 159.878665 108.623) (xy 160.161335 108.623) (xy 160.438574 108.567853) (xy 160.699727 108.45968) (xy 160.934759 108.302637) (xy 161.134637 108.102759) (xy 161.29 107.870241) (xy 161.445363 108.102759) (xy 161.645241 108.302637) (xy 161.880273 108.45968) (xy 162.141426 108.567853) (xy 162.418665 108.623) (xy 162.701335 108.623) (xy 162.978574 108.567853) (xy 163.239727 108.45968) (xy 163.474759 108.302637) (xy 163.674637 108.102759) (xy 163.83 107.870241) (xy 163.985363 108.102759) (xy 164.185241 108.302637) (xy 164.420273 108.45968) (xy 164.681426 108.567853) (xy 164.958665 108.623) (xy 165.241335 108.623) (xy 165.518574 108.567853) (xy 165.779727 108.45968) (xy 166.014759 108.302637) (xy 166.214637 108.102759) (xy 166.37 107.870241) (xy 166.525363 108.102759) (xy 166.725241 108.302637) (xy 166.960273 108.45968) (xy 167.221426 108.567853) (xy 167.498665 108.623) (xy 167.781335 108.623) (xy 168.058574 108.567853) (xy 168.319727 108.45968) (xy 168.554759 108.302637) (xy 168.754637 108.102759) (xy 168.91 107.870241) (xy 169.065363 108.102759) (xy 169.265241 108.302637) (xy 169.500273 108.45968) (xy 169.761426 108.567853) (xy 170.038665 108.623) (xy 170.321335 108.623) (xy 170.598574 108.567853) (xy 170.859727 108.45968) (xy 171.094759 108.302637) (xy 171.294637 108.102759) (xy 171.45168 107.867727) (xy 171.456067 107.857135) (xy 171.567615 108.043131) (xy 171.756586 108.251519) (xy 171.98258 108.419037) (xy 172.236913 108.539246) (xy 172.370961 108.579904) (xy 172.593 108.457915) (xy 172.593 107.315) (xy 172.573 107.315) (xy 172.573 107.061) (xy 172.593 107.061) (xy 172.593 105.918085) (xy 172.847 105.918085) (xy 172.847 107.061) (xy 172.867 107.061) (xy 172.867 107.315) (xy 172.847 107.315) (xy 172.847 108.457915) (xy 173.069039 108.579904) (xy 173.203087 108.539246) (xy 173.45742 108.419037) (xy 173.683414 108.251519) (xy 173.872385 108.043131) (xy 173.983933 107.857135) (xy 173.98832 107.867727) (xy 174.145363 108.102759) (xy 174.345241 108.302637) (xy 174.580273 108.45968) (xy 174.841426 108.567853) (xy 175.118665 108.623) (xy 175.401335 108.623) (xy 175.678574 108.567853) (xy 175.939727 108.45968) (xy 176.174759 108.302637) (xy 176.374637 108.102759) (xy 176.53168 107.867727) (xy 176.639853 107.606574) (xy 176.695 107.329335) (xy 176.695 107.046665) (xy 176.639853 106.769426) (xy 176.53168 106.508273) (xy 176.374637 106.273241) (xy 176.174759 106.073363) (xy 175.939727 105.91632) (xy 175.678574 105.808147) (xy 175.401335 105.753) (xy 175.118665 105.753) (xy 174.841426 105.808147) (xy 174.580273 105.91632) (xy 174.345241 106.073363) (xy 174.145363 106.273241) (xy 173.98832 106.508273) (xy 173.983933 106.518865) (xy 173.872385 106.332869) (xy 173.683414 106.124481) (xy 173.45742 105.956963) (xy 173.203087 105.836754) (xy 173.069039 105.796096) (xy 172.847 105.918085) (xy 172.593 105.918085) (xy 172.370961 105.796096) (xy 172.236913 105.836754) (xy 171.98258 105.956963) (xy 171.756586 106.124481) (xy 171.567615 106.332869) (xy 171.456067 106.518865) (xy 171.45168 106.508273) (xy 171.294637 106.273241) (xy 171.094759 106.073363) (xy 170.859727 105.91632) (xy 170.598574 105.808147) (xy 170.321335 105.753) (xy 170.038665 105.753) (xy 169.761426 105.808147) (xy 169.500273 105.91632) (xy 169.265241 106.073363) (xy 169.065363 106.273241) (xy 168.91 106.505759) (xy 168.754637 106.273241) (xy 168.554759 106.073363) (xy 168.319727 105.91632) (xy 168.058574 105.808147) (xy 167.781335 105.753) (xy 167.498665 105.753) (xy 167.221426 105.808147) (xy 166.960273 105.91632) (xy 166.725241 106.073363) (xy 166.525363 106.273241) (xy 166.37 106.505759) (xy 166.214637 106.273241) (xy 166.014759 106.073363) (xy 165.779727 105.91632) (xy 165.518574 105.808147) (xy 165.241335 105.753) (xy 164.958665 105.753) (xy 164.681426 105.808147) (xy 164.420273 105.91632) (xy 164.185241 106.073363) (xy 163.985363 106.273241) (xy 163.83 106.505759) (xy 163.674637 106.273241) (xy 163.474759 106.073363) (xy 163.239727 105.91632) (xy 162.978574 105.808147) (xy 162.701335 105.753) (xy 162.418665 105.753) (xy 162.141426 105.808147) (xy 161.880273 105.91632) (xy 161.645241 106.073363) (xy 161.445363 106.273241) (xy 161.29 106.505759) (xy 161.134637 106.273241) (xy 160.934759 106.073363) (xy 160.699727 105.91632) (xy 160.438574 105.808147) (xy 160.161335 105.753) (xy 159.878665 105.753) (xy 159.601426 105.808147) (xy 159.340273 105.91632) (xy 159.105241 106.073363) (xy 158.906643 106.271961) (xy 158.905812 106.263518) (xy 158.869502 106.14382) (xy 158.810537 106.033506) (xy 158.731185 105.936815) (xy 158.634494 105.857463) (xy 158.52418 105.798498) (xy 158.404482 105.762188) (xy 158.28 105.749928) (xy 157.76575 105.753) (xy 157.607 105.91175) (xy 157.353 105.91175) (xy 157.19425 105.753) (xy 156.68 105.749928) (xy 156.555518 105.762188) (xy 156.43582 105.798498) (xy 156.325506 105.857463) (xy 156.228815 105.936815) (xy 156.149463 106.033506) (xy 156.090498 106.14382) (xy 156.054188 106.263518) (xy 156.041928 106.388) (xy 155.564174 106.388) (xy 155.59045 106.301383) (xy 155.603193 106.172) (xy 155.6 106.139581) (xy 155.6 95.028419) (xy 155.603193 94.996) (xy 155.59045 94.866617) (xy 155.55271 94.742207) (xy 155.491425 94.62755) (xy 155.408948 94.527052) (xy 155.30845 94.444575) (xy 155.193793 94.38329) (xy 155.073059 94.346665) (xy 156.045 94.346665) (xy 156.045 94.629335) (xy 156.100147 94.906574) (xy 156.20832 95.167727) (xy 156.365363 95.402759) (xy 156.565241 95.602637) (xy 156.800273 95.75968) (xy 157.061426 95.867853) (xy 157.338665 95.923) (xy 157.621335 95.923) (xy 157.898574 95.867853) (xy 158.159727 95.75968) (xy 158.394759 95.602637) (xy 158.594637 95.402759) (xy 158.75 95.170241) (xy 158.905363 95.402759) (xy 159.105241 95.602637) (xy 159.340273 95.75968) (xy 159.601426 95.867853) (xy 159.878665 95.923) (xy 160.161335 95.923) (xy 160.438574 95.867853) (xy 160.699727 95.75968) (xy 160.934759 95.602637) (xy 161.134637 95.402759) (xy 161.29 95.170241) (xy 161.445363 95.402759) (xy 161.645241 95.602637) (xy 161.880273 95.75968) (xy 162.141426 95.867853) (xy 162.418665 95.923) (xy 162.701335 95.923) (xy 162.978574 95.867853) (xy 163.239727 95.75968) (xy 163.474759 95.602637) (xy 163.674637 95.402759) (xy 163.83 95.170241) (xy 163.985363 95.402759) (xy 164.185241 95.602637) (xy 164.420273 95.75968) (xy 164.681426 95.867853) (xy 164.958665 95.923) (xy 165.241335 95.923) (xy 165.518574 95.867853) (xy 165.779727 95.75968) (xy 166.014759 95.602637) (xy 166.214637 95.402759) (xy 166.37 95.170241) (xy 166.525363 95.402759) (xy 166.725241 95.602637) (xy 166.960273 95.75968) (xy 167.221426 95.867853) (xy 167.498665 95.923) (xy 167.781335 95.923) (xy 168.058574 95.867853) (xy 168.319727 95.75968) (xy 168.554759 95.602637) (xy 168.754637 95.402759) (xy 168.91 95.170241) (xy 169.065363 95.402759) (xy 169.265241 95.602637) (xy 169.500273 95.75968) (xy 169.761426 95.867853) (xy 170.038665 95.923) (xy 170.321335 95.923) (xy 170.598574 95.867853) (xy 170.859727 95.75968) (xy 171.094759 95.602637) (xy 171.294637 95.402759) (xy 171.45 95.170241) (xy 171.605363 95.402759) (xy 171.805241 95.602637) (xy 172.040273 95.75968) (xy 172.301426 95.867853) (xy 172.578665 95.923) (xy 172.861335 95.923) (xy 173.138574 95.867853) (xy 173.399727 95.75968) (xy 173.634759 95.602637) (xy 173.834637 95.402759) (xy 173.99 95.170241) (xy 174.145363 95.402759) (xy 174.345241 95.602637) (xy 174.580273 95.75968) (xy 174.841426 95.867853) (xy 175.118665 95.923) (xy 175.401335 95.923) (xy 175.678574 95.867853) (xy 175.939727 95.75968) (xy 176.174759 95.602637) (xy 176.374637 95.402759) (xy 176.53168 95.167727) (xy 176.639853 94.906574) (xy 176.695 94.629335) (xy 176.695 94.346665) (xy 176.639853 94.069426) (xy 176.53168 93.808273) (xy 176.374637 93.573241) (xy 176.174759 93.373363) (xy 175.939727 93.21632) (xy 175.678574 93.108147) (xy 175.401335 93.053) (xy 175.118665 93.053) (xy 174.841426 93.108147) (xy 174.580273 93.21632) (xy 174.345241 93.373363) (xy 174.145363 93.573241) (xy 173.99 93.805759) (xy 173.834637 93.573241) (xy 173.634759 93.373363) (xy 173.399727 93.21632) (xy 173.138574 93.108147) (xy 172.861335 93.053) (xy 172.578665 93.053) (xy 172.301426 93.108147) (xy 172.040273 93.21632) (xy 171.805241 93.373363) (xy 171.605363 93.573241) (xy 171.45 93.805759) (xy 171.294637 93.573241) (xy 171.094759 93.373363) (xy 170.859727 93.21632) (xy 170.598574 93.108147) (xy 170.321335 93.053) (xy 170.038665 93.053) (xy 169.761426 93.108147) (xy 169.500273 93.21632) (xy 169.265241 93.373363) (xy 169.065363 93.573241) (xy 168.91 93.805759) (xy 168.754637 93.573241) (xy 168.554759 93.373363) (xy 168.319727 93.21632) (xy 168.058574 93.108147) (xy 167.781335 93.053) (xy 167.498665 93.053) (xy 167.221426 93.108147) (xy 166.960273 93.21632) (xy 166.725241 93.373363) (xy 166.525363 93.573241) (xy 166.37 93.805759) (xy 166.214637 93.573241) (xy 166.014759 93.373363) (xy 165.779727 93.21632) (xy 165.518574 93.108147) (xy 165.241335 93.053) (xy 164.958665 93.053) (xy 164.681426 93.108147) (xy 164.420273 93.21632) (xy 164.185241 93.373363) (xy 163.985363 93.573241) (xy 163.83 93.805759) (xy 163.674637 93.573241) (xy 163.474759 93.373363) (xy 163.239727 93.21632) (xy 162.978574 93.108147) (xy 162.701335 93.053) (xy 162.418665 93.053) (xy 162.141426 93.108147) (xy 161.880273 93.21632) (xy 161.645241 93.373363) (xy 161.445363 93.573241) (xy 161.29 93.805759) (xy 161.134637 93.573241) (xy 160.934759 93.373363) (xy 160.699727 93.21632) (xy 160.438574 93.108147) (xy 160.161335 93.053) (xy 159.878665 93.053) (xy 159.601426 93.108147) (xy 159.340273 93.21632) (xy 159.105241 93.373363) (xy 158.905363 93.573241) (xy 158.75 93.805759) (xy 158.594637 93.573241) (xy 158.394759 93.373363) (xy 158.159727 93.21632) (xy 157.898574 93.108147) (xy 157.621335 93.053) (xy 157.338665 93.053) (xy 157.061426 93.108147) (xy 156.800273 93.21632) (xy 156.565241 93.373363) (xy 156.365363 93.573241) (xy 156.20832 93.808273) (xy 156.100147 94.069426) (xy 156.045 94.346665) (xy 155.073059 94.346665) (xy 155.069383 94.34555) (xy 154.972419 94.336) (xy 154.94 94.332807) (xy 154.907581 94.336) (xy 141.764419 94.336) (xy 141.732 94.332807) (xy 141.699581 94.336) (xy 141.602617 94.34555) (xy 141.478207 94.38329) (xy 141.36355 94.444575) (xy 141.263052 94.527052) (xy 141.180575 94.62755) (xy 141.11929 94.742207) (xy 141.08155 94.866617) (xy 141.068807 94.996) (xy 119.561927 94.996) (xy 119.874028 93.594935) (xy 120.491457 91.542689) (xy 121.257043 89.540988) (xy 122.166701 87.60051) (xy 123.215579 85.73161) (xy 124.398079 83.944259) (xy 125.707893 82.247994) (xy 127.061948 80.736777) (xy 130.425 80.736777) (xy 130.425 81.295223) (xy 130.533948 81.842939) (xy 130.747656 82.358876) (xy 131.057912 82.823207) (xy 131.452793 83.218088) (xy 131.917124 83.528344) (xy 132.433061 83.742052) (xy 132.980777 83.851) (xy 133.539223 83.851) (xy 134.086939 83.742052) (xy 134.602876 83.528344) (xy 135.067207 83.218088) (xy 135.462088 82.823207) (xy 135.772344 82.358876) (xy 135.986052 81.842939) (xy 136.095 81.295223) (xy 136.095 80.736777) (xy 135.986052 80.189061) (xy 135.772344 79.673124) (xy 135.462088 79.208793) (xy 135.067207 78.813912) (xy 134.989516 78.762) (xy 144.327928 78.762) (xy 144.327928 80.27) (xy 144.340188 80.394482) (xy 144.376498 80.51418) (xy 144.435463 80.624494) (xy 144.514815 80.721185) (xy 144.611506 80.800537) (xy 144.72182 80.859502) (xy 144.841518 80.895812) (xy 144.966 80.908072) (xy 146.474 80.908072) (xy 146.598482 80.895812) (xy 146.71818 80.859502) (xy 146.828494 80.800537) (xy 146.925185 80.721185) (xy 147.004537 80.624494) (xy 147.063502 80.51418) (xy 147.075128 80.475851) (xy 147.479754 80.475851) (xy 147.545765 80.715127) (xy 147.793426 80.831426) (xy 148.059018 80.897174) (xy 148.332334 80.909845) (xy 148.60287 80.868951) (xy 148.860229 80.776063) (xy 148.974235 80.715127) (xy 149.040246 80.475851) (xy 148.26 79.695605) (xy 147.479754 80.475851) (xy 147.075128 80.475851) (xy 147.099812 80.394482) (xy 147.112072 80.27) (xy 147.112072 80.24436) (xy 147.300149 80.296246) (xy 148.080395 79.516) (xy 148.439605 79.516) (xy 149.219851 80.296246) (xy 149.459127 80.230235) (xy 149.52994 80.079437) (xy 149.569084 80.173938) (xy 149.721093 80.401436) (xy 149.914564 80.594907) (xy 150.142062 80.746916) (xy 150.394844 80.851622) (xy 150.663195 80.905) (xy 150.936805 80.905) (xy 151.205156 80.851622) (xy 151.457938 80.746916) (xy 151.473112 80.736777) (xy 160.425 80.736777) (xy 160.425 81.295223) (xy 160.533948 81.842939) (xy 160.747656 82.358876) (xy 161.057912 82.823207) (xy 161.452793 83.218088) (xy 161.917124 83.528344) (xy 162.433061 83.742052) (xy 162.980777 83.851) (xy 163.539223 83.851) (xy 164.086939 83.742052) (xy 164.602876 83.528344) (xy 165.067207 83.218088) (xy 165.462088 82.823207) (xy 165.772344 82.358876) (xy 165.986052 81.842939) (xy 166.095 81.295223) (xy 166.095 80.736777) (xy 165.986052 80.189061) (xy 165.772344 79.673124) (xy 165.462088 79.208793) (xy 165.067207 78.813912) (xy 164.602876 78.503656) (xy 164.086939 78.289948) (xy 163.539223 78.181) (xy 162.980777 78.181) (xy 162.433061 78.289948) (xy 161.917124 78.503656) (xy 161.452793 78.813912) (xy 161.057912 79.208793) (xy 160.747656 79.673124) (xy 160.533948 80.189061) (xy 160.425 80.736777) (xy 151.473112 80.736777) (xy 151.685436 80.594907) (xy 151.878907 80.401436) (xy 152.030916 80.173938) (xy 152.135622 79.921156) (xy 152.189 79.652805) (xy 152.189 79.379195) (xy 152.135622 79.110844) (xy 152.030916 78.858062) (xy 151.878907 78.630564) (xy 151.685436 78.437093) (xy 151.457938 78.285084) (xy 151.205156 78.180378) (xy 150.936805 78.127) (xy 150.663195 78.127) (xy 150.394844 78.180378) (xy 150.142062 78.285084) (xy 149.914564 78.437093) (xy 149.721093 78.630564) (xy 149.569084 78.858062) (xy 149.531758 78.948174) (xy 149.520063 78.915771) (xy 149.459127 78.801765) (xy 149.219851 78.735754) (xy 148.439605 79.516) (xy 148.080395 79.516) (xy 147.300149 78.735754) (xy 147.112072 78.78764) (xy 147.112072 78.762) (xy 147.099812 78.637518) (xy 147.075129 78.556149) (xy 147.479754 78.556149) (xy 148.26 79.336395) (xy 149.040246 78.556149) (xy 148.974235 78.316873) (xy 148.726574 78.200574) (xy 148.460982 78.134826) (xy 148.187666 78.122155) (xy 147.91713 78.163049) (xy 147.659771 78.255937) (xy 147.545765 78.316873) (xy 147.479754 78.556149) (xy 147.075129 78.556149) (xy 147.063502 78.51782) (xy 147.004537 78.407506) (xy 146.925185 78.310815) (xy 146.828494 78.231463) (xy 146.71818 78.172498) (xy 146.598482 78.136188) (xy 146.474 78.123928) (xy 144.966 78.123928) (xy 144.841518 78.136188) (xy 144.72182 78.172498) (xy 144.611506 78.231463) (xy 144.514815 78.310815) (xy 144.435463 78.407506) (xy 144.376498 78.51782) (xy 144.340188 78.637518) (xy 144.327928 78.762) (xy 134.989516 78.762) (xy 134.602876 78.503656) (xy 134.086939 78.289948) (xy 133.539223 78.181) (xy 132.980777 78.181) (xy 132.433061 78.289948) (xy 131.917124 78.503656) (xy 131.452793 78.813912) (xy 131.057912 79.208793) (xy 130.747656 79.673124) (xy 130.533948 80.189061) (xy 130.425 80.736777) (xy 127.061948 80.736777) (xy 127.138032 80.651863) (xy 128.680866 79.164384) (xy 130.328163 77.793493) (xy 132.071134 76.546504) (xy 133.90048 75.43007) (xy 135.80644 74.450149) (xy 137.778846 73.611967) (xy 139.807172 72.919998) (xy 141.880599 72.377934) (xy 143.988062 71.988666) (xy 146.118317 71.754271) (xy 148.26 71.676) ) ) ) )