Open Source Projects
Explore open source hardware projects other folks uploaded and share your own. With CADLAB.io hardware version control it is way easier to work on hardware design projects together.
CADLAB demo project with interactive guide.
Top layer board that takes +36V from lower layer and generates various supply voltages for external peripherals: +3.3V, +5V iso, +12V, etc..
Serves as the central communications hub for all flight control operations.
This was designed and built by Redara Labs (formerly known as Blackstripe).
Document #059-50-008 Revision B
Middle layer board that takes +36 from lower layer and generates 6 x 8.1 volt power and connection to 6 x servo motors.
This was designed and built by Redara Labs (formerly known as Blackstripe).
Document #059-50-007 Revision B
Flight-Stack bottom layer board that converts battery power to isolated +36 Vdc.
This was designed and built by Redara Labs (formerly known as Blackstripe).
Document #059-50-006 Revision B
Driver de motores utilizando IC L6205
Digital (Analog) clock with alarm function
Phase II design of ESC Distributor Board.
This will be the central communication hub that communicates with the F200 ESC Interface boards on each motor using RS-485.
