Open Source Projects
Explore open source hardware projects other folks uploaded and share your own. With CADLAB.io hardware version control it is way easier to work on hardware design projects together.
Generic FTDI programmer with 3.3V LDO. Uses Pogo Pins
Gatilho eletrônico para AEGs
This project provides an easy way to control two independent motors using PWM.
The H-bridges used are LM18200 which provides up to 3A continuous output for each motor.
Each motor can be controlled with three signals:
DIR - define the direction of rotation of the motor
BRK - break the motor by shorting its terminals
PWM - control the speed of the motor
All the components used are PTH and the board is single sided.
Breakout board for the DS2482 I2C to 1-wire chip
