Open Source Projects
Explore open source hardware projects other folks uploaded and share your own. With CADLAB.io hardware version control it is way easier to work on hardware design projects together.
Hardware for the STM32-IRMP Projekt from JRIE
A ring of 64 smd leds controlled by four daisy chained TLC5940s. Header on the top right will go to an control board with an atmega and usb.
Posted byu/chankster
https://www.reddit.com/r/PCBDesignReview/comments/mfdk9/pcb_led_ring_board/
Daughter card for MCU based CNC controllers
Hex-Inverting Schmitt Trigger-based oscillator bank. Three of the sections of the CD40106 can be used either in free-running mode or with so-called hard-sync. The synchronizable sections are at higher frequency so as to be modulated by the lower frequency square waves generated by the first three sections.
Square waves with a standard 50% duty cycle are output.
Analog channel routing board design for connecting cable electrodes to their appropriate terminations on the topside hardware using a standardized connector pinout.
Simple board for SMT soldering practice