Files
-
hardware / bubblegum / bubblegum.brd
-
hardware / bubblegum / bubblegum.sch
-
hardware / hackrf-one / baseband.kicad_sch
-
hardware / hackrf-one / clock.kicad_sch
-
hardware / hackrf-one / frontend.kicad_sch
-
hardware / hackrf-one / hackrf-one.kicad_pcb
-
hardware / hackrf-one / hackrf-one.kicad_sch
-
hardware / hackrf-one / mcu.kicad_sch
-
hardware / jawbreaker / baseband.sch
-
hardware / jawbreaker / frontend.sch
-
hardware / jawbreaker / jawbreaker.brd
-
hardware / jawbreaker / jawbreaker.sch
-
hardware / jawbreaker / mcu.sch
-
hardware / jellybean / jellybean.brd
-
hardware / jellybean / jellybean.sch
-
hardware / lemondrop / lemondrop.brd
-
hardware / lemondrop / lemondrop.sch
-
hardware / licorice / licorice.brd
-
hardware / licorice / licorice.sch
-
hardware / LNA915 / LNA915.kicad_pcb
-
hardware / LNA915 / LNA915.sch
-
hardware / lollipop / lollipop.brd
-
hardware / lollipop / lollipop.sch
-
hardware / marzipan / baseband.sch
-
hardware / marzipan / frontend.sch
-
hardware / marzipan / marzipan.kicad_pcb
-
hardware / marzipan / marzipan.sch
-
hardware / marzipan / mcu.sch
-
hardware / neapolitan / baseband.sch
-
hardware / neapolitan / frontend.sch
-
hardware / neapolitan / mcu.sch
-
hardware / neapolitan / neapolitan.kicad_pcb
-
hardware / neapolitan / neapolitan.sch
-
hardware / operacake / operacake.kicad_pcb
-
hardware / operacake / operacake.sch
Last update 2 years 1 month
by
Gianpaolo Macario
rffc5071.h/* * Copyright 2012-2014 Great Scott Gadgets <info@greatscottgadgets.com> * Copyright 2014 Jared Boone <jared@sharebrained.com> * * This file is part of HackRF. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; see the file COPYING. If not, write to * the Free Software Foundation, Inc., 51 Franklin Street, * Boston, MA 02110-1301, USA. */ #ifndef __RFFC5071_H #define __RFFC5071_H #include <stdint.h> #include "spi_bus.h" #include "gpio.h" /* 31 registers, each containing 16 bits of data. */ #define RFFC5071_NUM_REGS 31 typedef struct { spi_bus_t* const bus; gpio_t gpio_reset; uint16_t regs[RFFC5071_NUM_REGS]; uint32_t regs_dirty; } rffc5071_driver_t; /* Initialize chip. Call _setup() externally, as it calls _init(). */ extern void rffc5071_init(rffc5071_driver_t* const drv); extern void rffc5071_setup(rffc5071_driver_t* const drv); /* Read a register via SPI. Save a copy to memory and return * value. Discard any uncommited changes and mark CLEAN. */ extern uint16_t rffc5071_reg_read(rffc5071_driver_t* const drv, uint8_t r); /* Write value to register via SPI and save a copy to memory. Mark * CLEAN. */ extern void rffc5071_reg_write(rffc5071_driver_t* const drv, uint8_t r, uint16_t v); /* Write all dirty registers via SPI from memory. Mark all clean. Some * operations require registers to be written in a certain order. Use * provided routines for those operations. */ extern void rffc5071_regs_commit(rffc5071_driver_t* const drv); /* Set frequency (MHz). */ extern uint64_t rffc5071_set_frequency(rffc5071_driver_t* const drv, uint16_t mhz); /* Set up rx only, tx only, or full duplex. Chip should be disabled * before _tx, _rx, or _rxtx are called. */ extern void rffc5071_tx(rffc5071_driver_t* const drv); extern void rffc5071_rx(rffc5071_driver_t* const drv); extern void rffc5071_rxtx(rffc5071_driver_t* const drv); extern void rffc5071_enable(rffc5071_driver_t* const drv); extern void rffc5071_disable(rffc5071_driver_t* const drv); extern void rffc5071_set_gpo(rffc5071_driver_t* const drv, uint8_t); #endif // __RFFC5071_H