Glasgow Embedded / Glasgow - History

revC2: Corrected the SOT-143 footprint.

The footprint in the KiCad library works but it is too large and could
cause assembly reliability issues. The new footprint and 3D model are
based on the official Diodes Inc data and match the part we are using.

revC2: Minor footprint type corrections.

The reset button had to be TH. Logos should be virtual.

revC2: add dimension drawings for the mounting holes

revC2: re-route ~MR trace on the bottom layer to not split the GND plane below voltage regulators

revC2: Updated the tact switch footprint to include 3d model.

Also fixed up the silkscreen and fab layers.

revC2: Replaced the small SMD tact switch with a slighly bigger TH version.

After testing and playing around with the small SMD tact switch we came
to the conclusion that a slightly bigger button will fit in the same
space and will give us more options. Also the longer, bigger and lower
weight tact switch will feel nicer and fit in the case better.

revC2: Connected a few remaining ground pad via solid to ground plane.