Files
-
PCB / ACC / CIAA_ACC / BANK_0.sch
-
PCB / ACC / CIAA_ACC / BANK_112.sch
-
PCB / ACC / CIAA_ACC / BANK_500.sch
-
PCB / ACC / CIAA_ACC / BANK_501.sch
-
PCB / ACC / CIAA_ACC / BANK_502.sch
-
PCB / ACC / CIAA_ACC / BANKS_HP.sch
-
PCB / ACC / CIAA_ACC / BANKS_HR.sch
-
PCB / ACC / CIAA_ACC / ciaa_acc.kicad_pcb
-
PCB / ACC / CIAA_ACC / ciaa_acc.sch
-
PCB / ACC / CIAA_ACC / Digital_IO.sch
-
PCB / ACC / CIAA_ACC / Expansion.sch
-
PCB / ACC / CIAA_ACC / FMC-Power.sch
-
PCB / ACC / CIAA_ACC / FPGA-Power.sch
-
PCB / ACC / CIAA_ACC / OneBank.sch
-
PCB / ACC / CIAA_ACC / PMIC.sch
-
PCB / ACC / CIAA_ACC / Principal.sch
-
PCB / ACC / CIAA_ACC / RTC-HDMI.sch
-
PCB / EDU-FSL / EDU_CIAA_K60 / cpu.sch
-
PCB / EDU-FSL / EDU_CIAA_K60 / EDU_CIAA_K60.kicad_pcb
-
PCB / EDU-FSL / EDU_CIAA_K60 / EDU_CIAA_K60.sch
-
PCB / EDU-FSL / EDU_CIAA_K60 / fuente.sch
-
PCB / EDU-FSL / EDU_CIAA_K60 / gpio.sch
-
PCB / EDU-FSL / EDU_CIAA_K60 / JTAG.sch
-
PCB / EDU-FSL / EDU_CIAA_K60 / on_board_io.sch
-
PCB / EDU-FSL / EDU_CIAA_K60 / rsS485.sch
-
PCB / EDU-FSL / EDU_CIAA_K60 / usb_otg.sch
-
PCB / EDU-INTEL / cpu.sch
-
PCB / EDU-INTEL / edk.kicad_pcb
-
PCB / EDU-INTEL / edk.sch
-
PCB / EDU-INTEL / power.sch
-
PCB / EDU-INTEL / sd_card.sch
-
PCB / EDU-INTEL / usb.sch
-
PCB / EDU-NXP / cpu.sch
-
PCB / EDU-NXP / edu-ciaa-nxp.kicad_pcb
-
PCB / EDU-NXP / edu-ciaa-nxp.sch
-
PCB / EDU-NXP / fuente.sch
-
PCB / EDU-NXP / gpio.sch
-
PCB / EDU-NXP / ON_BOARD_IO.sch
-
PCB / EDU-NXP / rsS485_can.sch
-
PCB / EDU-NXP / usb.sch
-
PCB / EDU-XILINX / ProyectoKicad / Bank14.sch
-
PCB / EDU-XILINX / ProyectoKicad / Bank15.sch
-
PCB / EDU-XILINX / ProyectoKicad / Bank35.sch
-
PCB / EDU-XILINX / ProyectoKicad / EduCiaaX.sch
-
PCB / EDU-XILINX / ProyectoKicad / FPGAConfig.sch
-
PCB / EDU-XILINX / ProyectoKicad / FPGAPower.sch
-
PCB / EDU-XILINX / ProyectoKicad / Power.sch
-
PCB / EDU-XILINX / ProyectoKicad / Usb.sch
-
PCB / FSL-MINI / CIAA_FSL_MINI.kicad_pcb
-
PCB / FSL-MINI / CIAA_FSL_MINI.sch
-
PCB / FSL-MINI / cpu.sch
-
PCB / FSL-MINI / ethernet.sch
-
PCB / FSL-MINI / fuente.sch
-
PCB / FSL-MINI / IO.sch
-
PCB / FSL-MINI / memories.sch
-
PCB / FSL-MINI / usb_otg.sch
-
PCB / FSL / CIAA_K60 / analog.sch
-
PCB / FSL / CIAA_K60 / analog_out.sch
-
PCB / FSL / CIAA_K60 / CIAA_K60.kicad_pcb
-
PCB / FSL / CIAA_K60 / CIAA_K60.sch
-
PCB / FSL / CIAA_K60 / cpu.sch
-
PCB / FSL / CIAA_K60 / din.sch
-
PCB / FSL / CIAA_K60 / dout.sch
-
PCB / FSL / CIAA_K60 / ethernet.sch
-
PCB / FSL / CIAA_K60 / fuente.sch
-
PCB / FSL / CIAA_K60 / gpio.sch
-
PCB / FSL / CIAA_K60 / JTAG.sch
-
PCB / FSL / CIAA_K60 / memories.sch
-
PCB / FSL / CIAA_K60 / rsS485_rs232_can.sch
-
PCB / FSL / CIAA_K60 / usb_otg.sch
-
PCB / NXP / .kicad_pcb.kicad_pcb
-
PCB / NXP / analog.sch
-
PCB / NXP / analog_out.sch
-
PCB / NXP / ciaa-nxp.kicad_pcb
-
PCB / NXP / ciaa-nxp.sch
-
PCB / NXP / cpu.sch
-
PCB / NXP / din.sch
-
PCB / NXP / dout.sch
-
PCB / NXP / ethernet.sch
-
PCB / NXP / fuente.sch
-
PCB / NXP / gpio.sch
-
PCB / NXP / mem.sch
-
PCB / NXP / rsS485_rs232_can.sch
-
PCB / NXP / usb_otg.sch
-
PCB / PIC / analog.sch
-
PCB / PIC / analog_out.sch
-
PCB / PIC / ciaa-pic.kicad_pcb
-
PCB / PIC / ciaa-pic.sch
-
PCB / PIC / cpu.sch
-
PCB / PIC / din.sch
-
PCB / PIC / dout.sch
-
PCB / PIC / ethernet.sch
-
PCB / PIC / fuente.sch
-
PCB / PIC / gpio.sch
-
PCB / PIC / JTAG.sch
-
PCB / PIC / mem.sch
-
PCB / PIC / rsS485_rs232_can.sch
-
PCB / PIC / usb_otg.sch
-
PCB / pico / cpu.sch
-
PCB / pico / debugger.sch
-
PCB / pico / picociaa.kicad_pcb
-
PCB / pico / picociaa.sch
-
PCB / RX / hw / .kicad_pcb.kicad_pcb
-
PCB / RX / hw / analog.sch
-
PCB / RX / hw / analog_out.sch
-
PCB / RX / hw / ciaa-rx.kicad_pcb
-
PCB / RX / hw / ciaa-rx.sch
-
PCB / RX / hw / cpu.sch
-
PCB / RX / hw / din.sch
-
PCB / RX / hw / dout.sch
-
PCB / RX / hw / ethernet.sch
-
PCB / RX / hw / fuente.sch
-
PCB / RX / hw / gpio.sch
-
PCB / RX / hw / mem.sch
-
PCB / RX / hw / rsS485_rs232_can.sch
-
PCB / RX / hw / usb_otg.sch
-
PCB / Safety / BUS_ISA.sch
-
PCB / Safety / CAN.sch
-
PCB / Safety / CIAA_Safety_VTI_1.0.kicad_pcb
-
PCB / Safety / CIAA_Safety_VTI_1.0.sch
-
PCB / Safety / CPU.sch
-
PCB / Safety / ETHERNET.sch
-
PCB / Safety / MEM_FLASH_SPI.sch
-
PCB / Safety / RM48L952.sch
-
PCB / Safety / USB HOST - MEM SD.sch
-
PCB / Safety / USB OTG.sch
-
PCB / Safety / USB.sch
-
PCB / Z3R0 / ciaa-z3r0.kicad_pcb
-
PCB / Z3R0 / ciaa-z3r0.sch
Last update 5 years 7 months
by
Noelia Scotti
sheet_layout.kicad_wks( page_layout (setup(textsize 1.5 1.5)(linewidth 0.15)(textlinewidth 0.15) (left_margin 10)(right_margin 10)(top_margin 10)(bottom_margin 10)) (rect (name rect1:Rect) (start 110.0022 22.00719999999998) (end 2 2)) (rect (name rect2:Rect) (start 0 0 ltcorner) (end 0 0) (repeat 2) (incrx 2) (incry 2)) (line (name segm1:Line) (start 50 2 ltcorner) (end 50 0 ltcorner) (repeat 30) (incrx 50)) (tbtext 1 (name text1:Text) (pos 25 1 ltcorner) (font (size 1.3 1.3)) (repeat 100) (incrx 50)) (line (name segm2:Line) (start 50 2 lbcorner) (end 50 0 lbcorner) (repeat 30) (incrx 50)) (tbtext 1 (name text2:Text) (pos 25 1 lbcorner) (font (size 1.3 1.3)) (repeat 100) (incrx 50)) (line (name segm3:Line) (start 0 50 ltcorner) (end 2 50 ltcorner) (repeat 30) (incry 50)) (tbtext A (name text3:Text) (pos 1 25 ltcorner) (font (size 1.3 1.3)) (justify center) (repeat 100) (incry 50)) (line (name segm4:Line) (start 0 50 rtcorner) (end 2 50 rtcorner) (repeat 30) (incry 50)) (tbtext A (name text4:Text) (pos 1 25 rtcorner) (font (size 1.3 1.3)) (justify center) (repeat 100) (incry 50)) (tbtext "Date: %D" (name text5:Text) (pos 87 6.9)) (line (name segm5:Line) (start 110 5.5) (end 2 5.5)) (tbtext %K (name text6:Text) (pos 109 4.1)) (line (name segm6:Line) (start 110 8.5) (end 2 8.5)) (tbtext "Rev: %R" (name text7:Text) (pos 24 6.9) (font bold)) (tbtext "Size: %Z" (name text8:Text) (pos 109 6.9)) (tbtext "Id: %S/%N" (name text9:Text) (pos 24 4.1)) (line (name segm7:Line) (start 110 12.5) (end 2 12.5)) (tbtext "Title: %T" (name text10:Text) (pos 109 10.7) (font (size 2 2) bold italic)) (tbtext "File: %F" (name text11:Text) (pos 109 14.3)) (line (name segm8:Line) (start 110 18.5) (end 2 18.5)) (tbtext "Sheet: %P" (name text12:Text) (pos 109 17)) (tbtext %Y (name text13:Text) (pos 109 20) (font bold)) (tbtext %C0 (name text14:Text) (pos 109 23)) (tbtext %C1 (name text15:Text) (pos 109 26)) (tbtext %C2 (name text16:Text) (pos 109 29)) (tbtext %C3 (name text17:Text) (pos 109 32)) (line (name segm9:Line) (start 90 8.5) (end 90 5.5)) (line (name segm10:Line) (start 26 8.5) (end 26 2)) )