mdtlc_eth.txt
-------------------------------

2D Impedance Calculator Program

Version 0.2.1.88

Time: Thu Nov 03 01:48:04 2016

GPL Version 2.0

-------------------------------

Simulation pix map 307 pixels high by 1800 pixels wide.

1658824 bytes allocated for bmp.

Simulation pix map 630 pixels high by 1800 pixels wide.

3403024 bytes allocated for bmp.

Simulation pix map 630 pixels high by 1800 pixels wide.

3403024 bytes allocated for bmp.

 

INPUT PARAMETERS:

 

      Layer             Thick   Specifications 

       Solder Mask Top   1.00    Opening w=0.0  offset=0.0

        Signal Layer 1   1.38  14.0-8.0-14.0  Etchback=0.00

      Laminate Layer 2  15.75    Resin Content  54.6% 3.2-6.0 

   Copper Plane Bottom   1.38    Opening w=0.0  offset=0.0

 

      Layer             Thick   Er    Loss Tangent

               Air top  43.50  1.00    0.00000

       Solder Mask Top   1.00  3.70    0.02900

        Signal Layer 1   1.38  4.20    0.00120

      Laminate Layer 2  15.75  4.47    0.01950

   Copper Plane Bottom   1.38  3.20

 

 DC resistance by dimensions:

 Rdc_trace_1= 35.18      Rdc_trace_2 = 35.18  milliohms/in 20C

 

 DC resistance by pixel count:

 Rdc_trace_1=  34.628     Rdc_trace_2 =  34.628 milliohm/in

 C_odd      =   2.997 pF/in    C_even =   1.869 pF/in

 Er_odd     =   2.937         Er_even =   3.264

 Loss_tan_o = 0.01713     Loss_tan_e  = 0.01762  

 Delay_odd  = 145.190      Delay_even = 153.058  ps/in.

 Z_diff     =  96.890  ohms   Z_comm  =  40.944  ohms

 

Log file save name: