Multiple issues !! Read comment Counter_3 moved to non-ADC GPIO18 Moved away from trying to put two ISRs on the same pin (you would think the IDE tells you off...) Tried GPIO4 for Counter3 but seemed to perturbate ADC2 for the high KR analog Should retry with the sorted double interrupt but no guarantee this will resolve things Updated schematics with currently GPIO4, may need to move to GPIO18 also in schematics and PCB and kill one of the digitals

Merge pull request #30 from martinroger/Martin-dev_PulseCounters Implemented based on pulse counting

Implemented based on pulse counting More stable RPM steps up every 30 RPM -> Map over 50's ? Missing Water check Some doubts on stability of pulse generators

Added Simple Moving Average filters Surely more elegant things can be done. Will branch from here to make a pulse_count version

Update VXDash.ino Added implementation for RPM, tried to stabilise with pulldowns but it doesn't really change anything

Speed estimation implementation Basic implementation of reciprocate (time period) speed estimation. Requires filtering, and possibly a different branch exploring pulse counting instead (every 100ms or so and some exit condition if three times 0 new pulses counted) Interrupt created for both speed and RPM Still need to study for the water PWM

Update VXDash.ino Introducing timers

Update VXDash.ino Introduction of raw values with correct type, sent to screen.

HMI adaptation + serial debug - HMI showing raw values - Pulsator with normal serial - Duty Cycle pot enabled 20 -> 80 - ESP sends raw values but not scaled currently

Minor changes, ADC correction - R4 ADC pin was not correctly set - logic on the overheat lamp