Files

copied
Last update 3 years 4 months
Files
ELECTRICAL
MECHANICAL
LICENCE.txt
OSHWA-GR000004.jpg
README.md
m10cube conventions.txt
m10cube-banner.jpg
m10cube.jpg
README.md

M10CUBE is a Practical Form Factor Ecosystem. It is the idea of a micro controller cube 10x10x10 cm.

SCOPE: A control block to be used like a Lego "brick" to solve any control problems. Definitely a job for micro controllers. A smart design to be used as PLC or IOT device for Industry 4.0 and M2M deployments.

FIELD OF APPLICATIONS: PLC, IOT, Education, Home Automation, Light Industrial Applications

PCBs, Schematics (Eagle and KiCAD), 3D enclosures and software are in constant developing. Applications will keep coming so to encourage everyone to get involved and to use the M10CUBE out of the box

Soon...

A PLC software using all M10CUBE I/Os :

First PLC software will be ]]>CODESYS]]> (Raspberry Pi runtime is free for 2 hours use) since there is a lot of experience with this IDE.

Then other, totally free and open source IEC 61131-3 ]]>BEREMIZ]]> or IEC 61499 ]]>4DIAC]]> enabled IDEs can follow . Hopping someone will give us a little help on these brilliant software, following the well known song ...

A M10CUBE sensor board software: That is written in Arduino IDE using all on board hardware running on the embedded ESP32 module.

More on ]]>wiki]]> section

License

<

p>

Verification code ]]> GR000004]]>

Licensed under the ]]> CERN OHL P 2.0 ]]> Software License: GPL v3 Documentation License: CC BY 4.0 International

Report a bug