README.md
View this project on CADLAB.io.

Kosmic Superspreader

<![CDATA[]]><![CDATA[]]>
<![CDATA[]]><![CDATA[]]>
<![CDATA[]]><![CDATA[]]>

About

This is a Kosmo format 'spread' module.
It takes a CV input and a Spread input.
The Spread input is:
* added to the CV input and sent to the + output.
* subtracted from the CV input and sent to the - output.
The CV input is also buffered and sent to the Buffer output - no multiples needed.

The Spread pot is used as an offset for the Spread input if a jack is plugged in, if not the Spread jack is normalled to ground.
The offset from the Spread pot swings between 0V and 12V.




<![CDATA[]]>Interactive BOM<![CDATA[]]>
Build notes/troubleshooting guide
<![CDATA[]]>Schematic<![CDATA[]]>
<![CDATA[]]>PCB Gerber files<![CDATA[]]>
<![CDATA[]]>PCB zipped Gerber files<![CDATA[]]>
<![CDATA[]]>Panel Gerber files<![CDATA[]]>
<![CDATA[]]>Panel zipped Gerber files<![CDATA[]]>
<![CDATA[]]>Tindie listing<![CDATA[]]>


There is an error on the silkscreen affecting some PCBs. 
For the v1.3 PCBs sold on Tindie, please see the build guide above.

This work is licensed under a
<![CDATA[]]>Creative Commons Attribution-ShareAlike 4.0 International License<![CDATA[]]>.

<![CDATA[]]><![CDATA[]]>



This project is certified <![CDATA[]]>open source hardware<![CDATA[]]>.