rkthebest / home automation - Files

hasp_plate01_p7_alarm.yaml
##############################################################################
# Automations to setup an alarm code panel on page 7

automation:
  # set key labels at system start
  - alias: hasp_plate01_p7_AlarmInit
    trigger:
      - platform: state
        entity_id: "binary_sensor.plate01_connected"
        to: "on"
      - platform: homeassistant
        event: start
    action:
      - service: mqtt.publish
        data:
          topic: "hasp/plate01/command/json"
          payload_template: >-
            [{%- for i in range(4,13) -%}"p[7].b[{{i}}].txt=\"{{i-3}}\"",{%- endfor -%}"p[7].b[14].txt=\"0\"",
            {%- for i in range(4,13) -%}"p[7].b[{{i}}].font=3",{%- endfor -%}"p[7].b[14].font=3"]

  # set key labels at system start when system is disarmed, or when switching to disarmed
  - alias: hasp_plate01_p7_AlarmDisarmed
    trigger:
      - platform: state
        entity_id: alarm_control_panel.ha_alarm
        to: "disarmed"
      - platform: state
        entity_id: "binary_sensor.plate01_connected"
        to: "on"
      - platform: homeassistant
        event: start
    condition:
      - condition: state
        entity_id: alarm_control_panel.ha_alarm
        state: "disarmed"
    action:
      - service: mqtt.publish
        data:
          topic: "hasp/plate01/command/json"
          payload: '["p[7].b[13].font=0","p[7].b[13].pco=63488","p[7].b[13].bco=65535","p[7].b[13].txt=\" DIS\\rARMED\"","p[7].b[15].font=1","p[7].b[15].pco=65535","p[7].b[15].bco=63488","p[7].b[15].txt=\"ARM\""]'

  # set key labels at system start when system is armed_away, or when switching to armed_away
  - alias: hasp_plate01_p7_AlarmArmed
    trigger:
      - platform: state
        entity_id: alarm_control_panel.ha_alarm
        to: "armed_away"
      - platform: state
        entity_id: "binary_sensor.plate01_connected"
        to: "on"
      - platform: homeassistant
        event: start
    condition:
      - condition: state
        entity_id: alarm_control_panel.ha_alarm
        state: "armed_away"
    action:
      - service: mqtt.publish
        data:
          topic: "hasp/plate01/command/json"
          payload: '["p[7].b[13].font=0","p[7].b[13].pco=65535","p[7].b[13].bco=63488","p[7].b[13].txt=\"ARMED\"","p[7].b[15].font=0","p[7].b[15].pco=63488","p[7].b[15].bco=65535","p[7].b[15].txt=\"DISARM\""]'

  # This automation catches the key presses 1-9 and sets our input numbers in response.
  # Button p[7]b[4] is labeled 1, so I'm grabbing buttons p[7]b[4] through p[7]b[13]
  # then subtracting 3.  The math doesn't work out for button "0" so that will be handled
  # in a separate automation.  Once we have the button number, we can copy slider 2 to 1,
  # 3 to 2, 4 to 3, then set our new value into slider 4 to update our rolling code entry.
  - alias: hasp_plate01_p7_AlarmCodeEntry1to9
    trigger:
      - platform: mqtt
        topic: "hasp/plate01/state/+"
        payload: "ON"
    condition:
      - condition: template
        value_template: '{{ (trigger.topic.split("/")[-1].split("p[")[1].split("]")[0]|int == 7) and ( 4 <= trigger.topic.split("/")[-1].split("].b[")[1].strip("]")|int <= 12) }}'
    action:
      - service: input_number.set_value
        data_template:
          entity_id: input_number.hasp_alarmcode1
          value: "{{ states('input_number.hasp_alarmcode2') }}"
      - service: input_number.set_value
        data_template:
          entity_id: input_number.hasp_alarmcode2
          value: "{{ states('input_number.hasp_alarmcode3') }}"
      - service: input_number.set_value
        data_template:
          entity_id: input_number.hasp_alarmcode3
          value: "{{ states('input_number.hasp_alarmcode4') }}"
      - service: input_number.set_value
        data_template:
          entity_id: input_number.hasp_alarmcode4
          value: '{{trigger.topic.split("/")[-1].split("].b[")[1].strip("]")|int-3}}'
  # same as above, for button labeled 0
  - alias: hasp_plate01_p7_AlarmCodeEntry0
    trigger:
      platform: mqtt
      topic: "hasp/plate01/state/p[7].b[14]"
      payload: "ON"
    action:
      - service: input_number.set_value
        data_template:
          entity_id: input_number.hasp_alarmcode1
          value: "{{ states('input_number.hasp_alarmcode2') }}"
      - service: input_number.set_value
        data_template:
          entity_id: input_number.hasp_alarmcode2
          value: "{{ states('input_number.hasp_alarmcode3') }}"
      - service: input_number.set_value
        data_template:
          entity_id: input_number.hasp_alarmcode3
          value: "{{ states('input_number.hasp_alarmcode4') }}"
      - service: input_number.set_value
        data:
          entity_id: input_number.hasp_alarmcode4
          value: "0"

  # Alarm panel is pending arm so update panel text
  - alias: hasp_plate01_p7_AlarmStatusPending
    trigger:
      - platform: state
        entity_id: alarm_control_panel.ha_alarm
        to: "pending"
    condition:
      - condition: state
        entity_id: "binary_sensor.plate01_connected"
        state: "on"
    action:
      - service: mqtt.publish
        data:
          topic: "hasp/plate01/command/p[7].b[13].txt"
          payload: '"ARMING"'

  # User is attempting to disarm the panel.  Send the alarm service our collected code then
  # reset all the sliders.
  - alias: hasp_plate01_p7_AlarmDisarm
    trigger:
      - platform: mqtt
        topic: "hasp/plate01/state/p[7].b[15]"
        payload: "OFF"
    condition:
      - condition: state
        entity_id: alarm_control_panel.ha_alarm
        state: "armed_away"
    action:
      - service: alarm_control_panel.alarm_disarm
        entity_id: alarm_control_panel.ha_alarm
        data_template:
          code: "{{ states('input_number.hasp_alarmcode1')|int }}{{ states('input_number.hasp_alarmcode2')|int }}{{ states('input_number.hasp_alarmcode3')|int }}{{ states('input_number.hasp_alarmcode4')|int }}"
      - service: input_number.set_value
        data_template:
          entity_id: input_number.hasp_alarmcode1
          value: "-1"
      - service: input_number.set_value
        data_template:
          entity_id: input_number.hasp_alarmcode2
          value: "-1"
      - service: input_number.set_value
        data_template:
          entity_id: input_number.hasp_alarmcode3
          value: "-1"
      - service: input_number.set_value
        data_template:
          entity_id: input_number.hasp_alarmcode4
          value: "-1"

  # User is attempting to arm the panel.  Send the alarm service our collected code then
  # reset all the sliders.
  - alias: hasp_plate01_p7_AlarmArm
    trigger:
      - platform: mqtt
        topic: "hasp/plate01/state/p[7].b[15]"
        payload: "OFF"
    condition:
      - condition: state
        entity_id: alarm_control_panel.ha_alarm
        state: "disarmed"
    action:
      - service: alarm_control_panel.alarm_arm_away
        entity_id: alarm_control_panel.ha_alarm
        data_template:
          code: "{{ states('input_number.hasp_alarmcode1')|int }}{{ states('input_number.hasp_alarmcode2')|int }}{{ states('input_number.hasp_alarmcode3')|int }}{{ states('input_number.hasp_alarmcode4')|int }}"
      - service: input_number.set_value
        data_template:
          entity_id: input_number.hasp_alarmcode1
          value: "-1"
      - service: input_number.set_value
        data_template:
          entity_id: input_number.hasp_alarmcode2
          value: "-1"
      - service: input_number.set_value
        data_template:
          entity_id: input_number.hasp_alarmcode3
          value: "-1"
      - service: input_number.set_value
        data_template:
          entity_id: input_number.hasp_alarmcode4
          value: "-1"

##############################################################################
# Automations to set colors on HASP Page 7
  - alias: hasp_plate01_p7_ColorConfig_selectedforegroundcolor
    trigger:
      - platform: state
        entity_id: "binary_sensor.plate01_connected"
        to: "on"
      - platform: homeassistant
        event: start
      - platform: state
        entity_id: input_number.hasp_plate01_selectedforegroundcolor
    action:
      - service: mqtt.publish
        data:
          topic: "hasp/plate01/command/json"
          payload_template: >-
            [{%- for i in range(4,13) -%}"p[7].b[{{i}}].pco={{ states('input_number.hasp_plate01_selectedforegroundcolor')|int }}",{%- endfor -%}
            "p[7].b[14].pco={{ states('input_number.hasp_plate01_selectedforegroundcolor')|int }}"]

  - alias: hasp_plate01_p7_ColorConfig_selectedbackgroundcolor
    trigger:
      - platform: state
        entity_id: "binary_sensor.plate01_connected"
        to: "on"
      - platform: homeassistant
        event: start
      - platform: state
        entity_id: input_number.hasp_plate01_selectedbackgroundcolor
    action:
      - service: mqtt.publish
        data:
          topic: "hasp/plate01/command/json"
          payload_template: >-
            [{%- for i in range(4,13) -%}"p[7].b[{{i}}].bco={{ states('input_number.hasp_plate01_selectedbackgroundcolor')|int }}",{%- endfor -%}
            "p[7].b[14].bco={{ states('input_number.hasp_plate01_selectedbackgroundcolor')|int }}"]

  - alias: hasp_plate01_p7_ColorConfig_unselectedforegroundcolor
    trigger:
      - platform: state
        entity_id: "binary_sensor.plate01_connected"
        to: "on"
      - platform: homeassistant
        event: start
      - platform: state
        entity_id: input_number.hasp_plate01_unselectedforegroundcolor
    action:
      - service: mqtt.publish
        data:
          topic: "hasp/plate01/command/json"
          payload_template: >-
            [{%- for i in range(4,13) -%}"p[7].b[{{i}}].pco2={{ states('input_number.hasp_plate01_unselectedforegroundcolor')|int }}",{%- endfor -%}
            "p[7].b[14].pco2={{ states('input_number.hasp_plate01_unselectedforegroundcolor')|int }}"]

  - alias: hasp_plate01_p7_ColorConfig_unselectedbackgroundcolor
    trigger:
      - platform: state
        entity_id: "binary_sensor.plate01_connected"
        to: "on"
      - platform: homeassistant
        event: start
      - platform: state
        entity_id: input_number.hasp_plate01_unselectedbackgroundcolor
    action:
      - service: mqtt.publish
        data:
          topic: "hasp/plate01/command/json"
          payload_template: >-
            [{%- for i in range(4,13) -%}"p[7].b[{{i}}].bco2={{ states('input_number.hasp_plate01_unselectedbackgroundcolor')|int }}",{%- endfor -%}
            "p[7].b[14].bco2={{ states('input_number.hasp_plate01_unselectedbackgroundcolor')|int }}"]