Dennis Field / dvk-mx8m-bsb - History

Moved components of ethernet interface into new position (reduced airwire crossings).

Place and route the rest of the battery sheet circuit, place and route the 10k (non-NC) resistors near the TCPC, route the EN_SRC and EN_SNK lines

TCPC still needs to be completed

Routed and connected some passive components around the ethernet interfaces.

Detected and corrected numbering error with MagJack J1701.
Eventually error with missing VCC of Pin 1 of J1707 (to be checked).

Route the USB diff pairs from the TVS protection + EMI filter IC circuit to the SoM, place and route the USB1_VBUS comparator circuit

Move and route the current limiting resistor for the charge controller circuit

Add new built-in mic's frequency response curve to the schematic and re-simulate the HP_DET pin circuit with the protection diode's SPICE model included

Wired some of the bypass capacitors at the ethernet PHY.

Routing of signals between ethernet PHY and SOM, mainly on layer In2.Cu.