Dennis Field / dvk-mx8m-bsb - History

Place and begin routing the camera, move the haptic motor to the "back" (side with the display) at a spot with its connector where there are no obstructions, move the slide switches to the "back-right" (front-left facing the display upright) and the ONOFF/volume buttons to the "front-left" (back-right facing the display upright)

Double check and update the SF56S006V4BR2000 micro-SIM socket footprint

Move the speaker's filter closer to the speaker, increase the speaker's trace widths to 0.8mm, do some minor adjustments to the USB diff pairs

Wiring of (M.2)-I2C level shifters, M.2 bypass caps.

Routed Wifi-SDIO and BT-RXD/TXD signals.
Placed glue logic of M.2 card.

Update the micro-SIM slot footprint's keepout zone which was overlapping with the DSW2 pad and was generally the incorrect size/position

The rest of the footprint still needs to be double checked after finding this error.

Begin laying out the WWAN/BB antenna footprint, including its feedline dimensions and clearance area, add 3D models for the push button and slide switch

Add pi-matching circuit to the baseband modem antenna's feedline

The return path for the antenna may have to have a 6.8nH Murata LQG15HN inductor installed on it (cutting the ground trace shorting the pads). The BoM was updated with the new components and everything was reannotated and updated (page 2's caps were out of order).

Move the mPCIe slot and the associated circuit 0.5mm to the right in order to make room for the BB antenna