New bspd resistor values

TSAL rev3 (#79) * Created a copy of TSAL rev 2 to make minor changes * Changed the size of the pads, moved the resitor names to the right side of the board, and moved the traces so that the silk screen is visible * Finished making the revisions for rev 3 of the TSAL * Copied Rev2 schematic to connect to the rev3 board * Made the board and schematic consistent * Altered the silk screen so that it said rev 3 instead of rev 2 * added the new na555 timer schematic * Added the gate resistor and made the text on the symbols layer * Added a description to the schematic * Changed a zener diode to a tvs diode and got rid of the LED silkscreen * Changes in board review This reverts commit d30a44cf333b6e75a81830c5357fabca05badc4e. * Simplified switches, More cooling Replaced MAX4622 with ADG1423 Moved logos and resistors on the right upwards Expanded thermal copper for LEDs * Final changes * Done Co-authored-by: ckaminsky7 <71229964+ckaminsky7@users.noreply.github.com> Co-authored-by: SoapIsClean

Esf schematics (#82) * added ESF schematics * small schematic edits * more small edits * fixed mistakes in ESF version of BSPD rev10 * updated ESF schematics * exported images Co-authored-by: Shaand1 Co-authored-by: sdhawan8 <>

Hv board rev 14 (#81) * Work in progress * Adjusted library * Continued routing * Fixing eagle part * Adjusted filter positions * Fixed library part for isolated gate driver * Continuing work * Continuing routing * Finished routing * Adjusting schematic slightly * Removed unnecessary capacitors and added sense for 60V threshold * Removed all values * Working on silkscreen * Added sensing for OKHS * Pull down 60V_THRESHOLD_SIGNAL * HV board rev 12 done * Changed NE Op-amp to generic * Added top copper pour * Adjusted traces slightly * Increased via sizes, fixed silkscreen labels, approved ERC and DRC errors * Fixed one via * Adjusted vias slightly and solved DRC issues * Final * Added HV Spacing * Updating attributes * Started adjusting tolerances * Set cap tolerance to 5% and res tolerance to 1% * Fixed ones skipped * Started rev13 and tuned the BSPD divider to be exactly 18A * Adjusted connector with tight spacing * Adjusted HV board to fix can traceiver capacitor values * Reflecting master version of HV board rev12 * Work on rev13 * More work on HV board rev13 * Schematic cleanup * Schematic cleanup finished * Adjusted minorly * Fixed minor overlap * Minor overlapped fixed * Final schematic * HV section done * progress * Nearly done * Almost done * I changed thigns * Resize board * Adjusted HV area * Further fixes * Final fixes * Finished * Fixed silkscreen and overlaps * Probably done * I'm 90% percent sure I'm doen * Adjusted name * Created the new revision file. * Dropped in the MAX7400, removed cs, and took out pull up on MOSI * Added some stuff and took some things away * Started moving parting into board design * Added the new parts to the board with a change to the board design * Finished the changes to the schematic and worked on the board design * Made some more board changes * Final changes to board design made. * got rid of some wire stubs * Should be done Co-authored-by: yvonneyeh Co-authored-by: 19etweinstock <19etweinstock@users.noreply.github.com> Co-authored-by: ckaminsky7 <71229964+ckaminsky7@users.noreply.github.com> Co-authored-by: sdhawan8 <43023063+shaand1@users.noreply.github.com>

System diagram (#80) * started working on new system diagram * more edits to dashboard * updated main ecu io * updated system in front of firewall * small edits * TS internals updates * small edits * finishing up TS, shutdown, edits to power switching * finished rough draft * small aesthetic fixes * power switching small edit * added exported image * added TSAL * small edits * export image * exported image used in design event presentation Co-authored-by: sdhawan8 <>

DC-DC Converter rev1 (#76) * created dc dc converter schematic * Made changes * Added new cap and made board * changed plane sizes, fixed traces * fixed trace widths * Made changes to the board layout to be the correct size * Deleted old libraries * Made more changes to dc dc converter * Fixed the packages * Fixed the packages * fixed git's fun with dc-dc * Finished dc dc board * Updated dc dc converter * Updated dc dc converter board design * Made final changes to DC DC Converter Board * Added a silkscreen to the board * Made final changes * Final changes made * Changed the layer of the dimensions Co-authored-by: Ethan Weinstock

Hv board rev 13 (#71) * Work in progress * Adjusted library * Continued routing * Fixing eagle part * Adjusted filter positions * Fixed library part for isolated gate driver * Continuing work * Continuing routing * Finished routing * Adjusting schematic slightly * Removed unnecessary capacitors and added sense for 60V threshold * Removed all values * Working on silkscreen * Added sensing for OKHS * Pull down 60V_THRESHOLD_SIGNAL * HV board rev 12 done * Changed NE Op-amp to generic * Added top copper pour * Adjusted traces slightly * Increased via sizes, fixed silkscreen labels, approved ERC and DRC errors * Fixed one via * Adjusted vias slightly and solved DRC issues * Final * Added HV Spacing * Updating attributes * Started adjusting tolerances * Set cap tolerance to 5% and res tolerance to 1% * Fixed ones skipped * Started rev13 and tuned the BSPD divider to be exactly 18A * Adjusted connector with tight spacing * Adjusted HV board to fix can traceiver capacitor values * Reflecting master version of HV board rev12 * Work on rev13 * More work on HV board rev13 * Schematic cleanup * Schematic cleanup finished * Adjusted minorly * Fixed minor overlap * Minor overlapped fixed * Final schematic * HV section done * progress * Nearly done * Almost done * I changed thigns * Resize board * Adjusted HV area * Further fixes * Final fixes * Finished * Fixed silkscreen and overlaps * Probably done * I'm 90% percent sure I'm doen * Adjusted name Co-authored-by: Arvind Srinivasan Co-authored-by: yvonneyeh Co-authored-by: 19etweinstock <19etweinstock@users.noreply.github.com> Co-authored-by: ckaminsky7 <71229964+ckaminsky7@users.noreply.github.com>

E fuse (#66) * Created the schematic and pcb layout for the TPS26600 testing board * Made changes to the pcb and schematic to comply with Hytech conventions * Changed the pcb and schematic layouts to comply with Hytech standards * Updated the E-Fuse board so that it is ready for production * Created a schematic for the TPS26630 breakout board and began the pcb layout * Finished the TPS26630 E-Fuse breakout board layout * Made changes to the TPS26630 test board so that it is ready to be manufactured * Made sure the board was correct before ordering it * Created TPS 26600 module board * Made it so that there were no drc errors

Update .gitignore (#68)

BMS Patch (#65) * Fixed erc warnings on rev12 * Attempt to fix too large text on sheets * Adjusted slighty