HyTech Racing / circuits-2020 - History

Enerdal adapter rev5 (#59)

* Created the enerdel adapter rev5 files

* Finished the enerdal adapter rev 5 of the pcb design

* Updated the Enerdal_Adapter

* Made file changes so that the files were correctly named

* Corrected the dimentions layer of the board design

* Changed the mounting holes to the M4 mounting hole device from the HyTech Library and verified the board

* Adjusted schematic/board

* Added frame to schematic and measures to board

Co-authored-by: Arvind Srinivasan <arvindsrinivasan@gatech.edu>

Dashboard rev2 (#56)

* Dashboard rev2

Space out LEDs
Updated resistor array
Added SSOK read

* Made board compliant with general HyTech DRC

* Board passes DRC

* Via clean up

Removed unnecessary vias
Moved SSOK read to pin 19

* Pre-via stitch

Lengthed edges to make space for mount

* Finished size increased

Left about 0.8 inches circular around mounting holes
Improved traces
Removed unnecessary vias

* Grounding improvements

* Added Thermal Padding

Added heatsink area for LEDs

* Added shutdown H read

Moved shutdown H read from main ecu to dashboard

* Ran renumber

* Changed names and labels

* Rputing improvement

* Rputing improvement

* Improvements to dashboard design

* Minor changes

* Swapped transistors

* adjusted mosfet signals routing

* Fixed crystal package

* Some routing improvements

* Some changes from review

* Change to dashboard

* Fixed resistors

* Updated names

* Added 0603 jumper

* Create Dashboard rev2_2020-10-21.zip

* removed GT logo from the dashboard

* Merge master into dashboard branch

Co-authored-by: 19etweinstock <19etweinstock@users.noreply.github.com>
Co-authored-by: Leonid Pozdneev <leo.pozdneev@gmail.com>

BMS rev 13/14 (#55)

* Added rev 13 initial swapover

* Used rev 12 updated to share locations of resistors

* Fixed overlapping traces

* Added rev 13 mechancial outline

* Improved rev 6 BMS layout

* Removed rev13 outline

* Created rev 13 and rev 14 that will be modified with the HT05 spring layout

* Fixed incorrect datasheet references

* Updated routing with rev12 fixes

* Updated both schematics and boards to latest library

* Added HVD to diagram

* Added energy meter

* Updated layout

* Added frame to rev13 schematic

* Added frame to rev14 schematic

* Fixed 0 position on silkscreen

* Rev13 dimensions adjusted, requries fixes

* Rev14 dimensions adjusted, requries fixes

* Fixed mounting hole locations, recentered PCB, and fixed 3 spring locations

* Fixed more spring locations

* BMS rev13 mechanical outline created

* Adjusted dimensions of board further

* Fixed routing and silkscreen

* Minor fixes from today's design review

* Removed extra files and started mechanical outlines

* Adjusted dimensions + updated mechanical outlines

* Moved single transistor pad

* Passed DRC and added frames

* Ensures board passes JLC DRC

Update .gitignore for LTSpice files (#54)

* Update .gitignore

* I'm bad at git

Co-authored-by: 19etweinstock <19etweinstock@users.noreply.github.com>

Creates license (#39)

* Creates license

* Update README.md

Update README.md (#53)

* Update README.md

* fixed one software guide link

Co-authored-by: shaand1 <shaand4@gmail.com>

HV Board rev 12 (#52)

* Work in progress

* Adjusted library

* Continued routing

* Fixing eagle part

* Adjusted filter positions

* Fixed library part for isolated gate driver

* Continuing work

* Continuing routing

* Finished routing

* Adjusting schematic slightly

* Removed unnecessary capacitors and added sense for 60V threshold

* Removed all values

* Working on silkscreen

* Added sensing for OKHS

* Pull down 60V_THRESHOLD_SIGNAL

* HV board rev 12 done

* Changed NE Op-amp to generic

* Added top copper pour

* Adjusted traces slightly

* Increased via sizes, fixed silkscreen labels, approved ERC and DRC errors

* Fixed one via

* Adjusted vias slightly and solved DRC issues

* Final

* Added HV Spacing

* Updating attributes

* Started adjusting tolerances

* Set cap tolerance to 5% and res tolerance to 1%

* Fixed ones skipped

* Removed libraries to match master

* Updated ref to latest library version

* Fixed schematic lack of clarify on STWD100

* Update pull_request_template.md

* Added current frames on frames-update branch

* Updated sheet descriptions

Co-authored-by: yvonneyeh <yvonneyeh8@gmail.com>

Dashboard rev1 (#49)

* added dashboard schematic and board files

* removed pictures and pdfs