HyTech Racing / circuits-2020 - History

Finished all traces on board, still yet to pass DRC

Did most of the traces, having some issues with passing on-campus DRC

Added rest of circuitry

Added test points to connect wires to
Added jumper so you can measure current output (I recommend)

DC-DC Converter rev1 (#76)

* created dc dc converter schematic

* Made changes

* Added new cap and made board

* changed plane sizes, fixed traces

* fixed trace widths

* Made changes to the board layout to be the correct size

* Deleted old libraries

* Made more changes to dc dc converter

* Fixed the packages

* Fixed the packages

* fixed git's fun with dc-dc

* Finished dc dc board

* Updated dc dc converter

* Updated dc dc converter board design

* Made final changes to DC DC Converter Board

* Added a silkscreen to the board

* Made final changes

* Final changes made

* Changed the layer of the dimensions

Co-authored-by: Ethan Weinstock <ethangweinstock@gmail.com>

Hv board rev 13 (#71)

* Work in progress

* Adjusted library

* Continued routing

* Fixing eagle part

* Adjusted filter positions

* Fixed library part for isolated gate driver

* Continuing work

* Continuing routing

* Finished routing

* Adjusting schematic slightly

* Removed unnecessary capacitors and added sense for 60V threshold

* Removed all values

* Working on silkscreen

* Added sensing for OKHS

* Pull down 60V_THRESHOLD_SIGNAL

* HV board rev 12 done

* Changed NE Op-amp to generic

* Added top copper pour

* Adjusted traces slightly

* Increased via sizes, fixed silkscreen labels, approved ERC and DRC errors

* Fixed one via

* Adjusted vias slightly and solved DRC issues

* Final

* Added HV Spacing

* Updating attributes

* Started adjusting tolerances

* Set cap tolerance to 5% and res tolerance to 1%

* Fixed ones skipped

* Started rev13 and tuned the BSPD divider to be exactly 18A

* Adjusted connector with tight spacing

* Adjusted HV board to fix can traceiver capacitor values

* Reflecting master version of HV board rev12

* Work on rev13

* More work on HV board rev13

* Schematic cleanup

* Schematic cleanup finished

* Adjusted minorly

* Fixed minor overlap

* Minor overlapped fixed

* Final schematic

* HV section done

* progress

* Nearly done

* Almost done

* I changed thigns

* Resize board

* Adjusted HV area

* Further fixes

* Final fixes

* Finished

* Fixed silkscreen and overlaps

* Probably done

* I'm 90% percent sure I'm doen

* Adjusted name

Co-authored-by: Arvind Srinivasan <arvindsrinivasan@gatech.edu>
Co-authored-by: yvonneyeh <yvonneyeh8@gmail.com>
Co-authored-by: 19etweinstock <19etweinstock@users.noreply.github.com>
Co-authored-by: ckaminsky7 <71229964+ckaminsky7@users.noreply.github.com>

E fuse (#66)

* Created the schematic and pcb layout for the TPS26600 testing board

* Made changes to the pcb and schematic to comply with Hytech conventions

* Changed the pcb and schematic layouts to comply with Hytech standards

* Updated the E-Fuse board so that it is ready for production

* Created a schematic for the TPS26630 breakout board and began the pcb layout

* Finished the TPS26630 E-Fuse breakout board layout

* Made changes to the TPS26630 test board so that it is ready to be manufactured

* Made sure the board was correct before ordering it

* Created TPS 26600 module board

* Made it so that there were no drc errors

BMS Patch (#65)

* Fixed erc warnings on rev12

* Attempt to fix too large text on sheets

* Adjusted slighty