Files
-
PCB / ACC / CIAA_ACC / BANK_0.sch
-
PCB / ACC / CIAA_ACC / BANK_112.sch
-
PCB / ACC / CIAA_ACC / BANK_500.sch
-
PCB / ACC / CIAA_ACC / BANK_501.sch
-
PCB / ACC / CIAA_ACC / BANK_502.sch
-
PCB / ACC / CIAA_ACC / BANKS_HP.sch
-
PCB / ACC / CIAA_ACC / BANKS_HR.sch
-
PCB / ACC / CIAA_ACC / ciaa_acc.kicad_pcb
-
PCB / ACC / CIAA_ACC / ciaa_acc.sch
-
PCB / ACC / CIAA_ACC / Digital_IO.sch
-
PCB / ACC / CIAA_ACC / Expansion.sch
-
PCB / ACC / CIAA_ACC / FMC-Power.sch
-
PCB / ACC / CIAA_ACC / FPGA-Power.sch
-
PCB / ACC / CIAA_ACC / OneBank.sch
-
PCB / ACC / CIAA_ACC / PMIC.sch
-
PCB / ACC / CIAA_ACC / Principal.sch
-
PCB / ACC / CIAA_ACC / RTC-HDMI.sch
-
PCB / EDU-FSL / EDU_CIAA_K60 / cpu.sch
-
PCB / EDU-FSL / EDU_CIAA_K60 / EDU_CIAA_K60.kicad_pcb
-
PCB / EDU-FSL / EDU_CIAA_K60 / EDU_CIAA_K60.sch
-
PCB / EDU-FSL / EDU_CIAA_K60 / fuente.sch
-
PCB / EDU-FSL / EDU_CIAA_K60 / gpio.sch
-
PCB / EDU-FSL / EDU_CIAA_K60 / JTAG.sch
-
PCB / EDU-FSL / EDU_CIAA_K60 / on_board_io.sch
-
PCB / EDU-FSL / EDU_CIAA_K60 / rsS485.sch
-
PCB / EDU-FSL / EDU_CIAA_K60 / usb_otg.sch
-
PCB / EDU-INTEL / cpu.sch
-
PCB / EDU-INTEL / edk.kicad_pcb
-
PCB / EDU-INTEL / edk.sch
-
PCB / EDU-INTEL / power.sch
-
PCB / EDU-INTEL / sd_card.sch
-
PCB / EDU-INTEL / usb.sch
-
PCB / EDU-NXP / cpu.sch
-
PCB / EDU-NXP / edu-ciaa-nxp.kicad_pcb
-
PCB / EDU-NXP / edu-ciaa-nxp.sch
-
PCB / EDU-NXP / fuente.sch
-
PCB / EDU-NXP / gpio.sch
-
PCB / EDU-NXP / ON_BOARD_IO.sch
-
PCB / EDU-NXP / rsS485_can.sch
-
PCB / EDU-NXP / usb.sch
-
PCB / EDU-XILINX / ProyectoKicad / Bank14.sch
-
PCB / EDU-XILINX / ProyectoKicad / Bank15.sch
-
PCB / EDU-XILINX / ProyectoKicad / Bank35.sch
-
PCB / EDU-XILINX / ProyectoKicad / EduCiaaX.sch
-
PCB / EDU-XILINX / ProyectoKicad / FPGAConfig.sch
-
PCB / EDU-XILINX / ProyectoKicad / FPGAPower.sch
-
PCB / EDU-XILINX / ProyectoKicad / Power.sch
-
PCB / EDU-XILINX / ProyectoKicad / Usb.sch
-
PCB / FSL-MINI / CIAA_FSL_MINI.kicad_pcb
-
PCB / FSL-MINI / CIAA_FSL_MINI.sch
-
PCB / FSL-MINI / cpu.sch
-
PCB / FSL-MINI / ethernet.sch
-
PCB / FSL-MINI / fuente.sch
-
PCB / FSL-MINI / IO.sch
-
PCB / FSL-MINI / memories.sch
-
PCB / FSL-MINI / usb_otg.sch
-
PCB / FSL / CIAA_K60 / analog.sch
-
PCB / FSL / CIAA_K60 / analog_out.sch
-
PCB / FSL / CIAA_K60 / CIAA_K60.kicad_pcb
-
PCB / FSL / CIAA_K60 / CIAA_K60.sch
-
PCB / FSL / CIAA_K60 / cpu.sch
-
PCB / FSL / CIAA_K60 / din.sch
-
PCB / FSL / CIAA_K60 / dout.sch
-
PCB / FSL / CIAA_K60 / ethernet.sch
-
PCB / FSL / CIAA_K60 / fuente.sch
-
PCB / FSL / CIAA_K60 / gpio.sch
-
PCB / FSL / CIAA_K60 / JTAG.sch
-
PCB / FSL / CIAA_K60 / memories.sch
-
PCB / FSL / CIAA_K60 / rsS485_rs232_can.sch
-
PCB / FSL / CIAA_K60 / usb_otg.sch
-
PCB / NXP / .kicad_pcb.kicad_pcb
-
PCB / NXP / analog.sch
-
PCB / NXP / analog_out.sch
-
PCB / NXP / ciaa-nxp.kicad_pcb
-
PCB / NXP / ciaa-nxp.sch
-
PCB / NXP / cpu.sch
-
PCB / NXP / din.sch
-
PCB / NXP / dout.sch
-
PCB / NXP / ethernet.sch
-
PCB / NXP / fuente.sch
-
PCB / NXP / gpio.sch
-
PCB / NXP / mem.sch
-
PCB / NXP / rsS485_rs232_can.sch
-
PCB / NXP / usb_otg.sch
-
PCB / PIC / analog.sch
-
PCB / PIC / analog_out.sch
-
PCB / PIC / ciaa-pic.kicad_pcb
-
PCB / PIC / ciaa-pic.sch
-
PCB / PIC / cpu.sch
-
PCB / PIC / din.sch
-
PCB / PIC / dout.sch
-
PCB / PIC / ethernet.sch
-
PCB / PIC / fuente.sch
-
PCB / PIC / gpio.sch
-
PCB / PIC / JTAG.sch
-
PCB / PIC / mem.sch
-
PCB / PIC / rsS485_rs232_can.sch
-
PCB / PIC / usb_otg.sch
-
PCB / pico / cpu.sch
-
PCB / pico / debugger.sch
-
PCB / pico / picociaa.kicad_pcb
-
PCB / pico / picociaa.sch
-
PCB / RX / hw / .kicad_pcb.kicad_pcb
-
PCB / RX / hw / analog.sch
-
PCB / RX / hw / analog_out.sch
-
PCB / RX / hw / ciaa-rx.kicad_pcb
-
PCB / RX / hw / ciaa-rx.sch
-
PCB / RX / hw / cpu.sch
-
PCB / RX / hw / din.sch
-
PCB / RX / hw / dout.sch
-
PCB / RX / hw / ethernet.sch
-
PCB / RX / hw / fuente.sch
-
PCB / RX / hw / gpio.sch
-
PCB / RX / hw / mem.sch
-
PCB / RX / hw / rsS485_rs232_can.sch
-
PCB / RX / hw / usb_otg.sch
-
PCB / Safety / BUS_ISA.sch
-
PCB / Safety / CAN.sch
-
PCB / Safety / CIAA_Safety_VTI_1.0.kicad_pcb
-
PCB / Safety / CIAA_Safety_VTI_1.0.sch
-
PCB / Safety / CPU.sch
-
PCB / Safety / ETHERNET.sch
-
PCB / Safety / MEM_FLASH_SPI.sch
-
PCB / Safety / RM48L952.sch
-
PCB / Safety / USB HOST - MEM SD.sch
-
PCB / Safety / USB OTG.sch
-
PCB / Safety / USB.sch
-
PCB / Z3R0 / ciaa-z3r0.kicad_pcb
-
PCB / Z3R0 / ciaa-z3r0.sch
Last update 5 years 8 months
by
Noelia Scotti
| FilesPCBACCCIAA_ACCdocarmado | |
|---|---|
| .. | |
| assembly.txt |
assembly.txtCIAA-ACC Assembly Notes 1) Battery Holder: Remove through hole pins before solder. The battery holder footprint doesn't have holes because there is no space in the pcb. 2) JP4: Solder 20 k resistor on the default position, see silkscreen layer. 3) DS6, DS6: Cathod is near the board edge.