KAD - Kabuki Delay Board.dri
Generated by EAGLE CAM Processor 9.2.1

Drill Station Info File: C:/Users/Yeeks/Documents/repos/ShowTex developments/Kabuki Delay/kabuki-delay-board/Rev A1/KAD - Rev A1 - MDP/KAD - Rev A1 - Gerber/KAD - Kabuki Delay Board.dri

 Date              : 2019-01-09 17:45
 Drills            : generated
 Device            : Excellon drill station, coordinate format 2.5 inch

Parameter settings:

 Tolerance Drill + :  0.00 %
 Tolerance Drill - :  0.00 %
 Rotate            : no
 Mirror            : no
 Optimize          : yes
 Auto fit          : yes
 OffsetX           : 0inch
 OffsetY           : 0inch
 Layers            : Drills Holes

Drill File Info:

 Data Mode         : Absolute
 Units             : 1/100000 Inch

Drills used:

 Code  Size       used

 T01   0.0138inch     7
 T02   0.0200inch    20
 T03   0.0236inch    13
 T04   0.0280inch     2
 T05   0.0512inch     8
 T06   0.0550inch     4
 T07   0.1260inch     2

Total number of drills: 56

Plotfiles:

 C:/Users/Yeeks/Documents/repos/ShowTex developments/Kabuki Delay/kabuki-delay-board/Rev A1/KAD - Rev A1 - MDP/KAD - Rev A1 - Gerber/KAD - Kabuki Delay Board.drill