oshpark-2layer-auto-routing.dru
description[en] = <b>OSH Park Design Rules</b>\n<p>\nPlease make sure your boards conform to these design rules.\n</p>\n<p>\nThis DRC is very conservative, and is good for use with the auto-router. Auto-routers tend to generate unusual wiring layouts that both difficult to manufacture, and are tough to correct without experience. These conservative specs prevent these types of errors, ensuring your boards get fabbed without issue.\n</p>\n<p>\nNote, that not all DRC settings must be set by the manufacturer. Several can be adjusted for the design, including those listed on our docs page here. \n<a href="http://docs.oshpark.com/design-tools/eagle/design-rules-files/">Adjustable Settings</a>\n</p>
layerSetup = (1*16)
mtCopper = 0.035559375mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.035559375mm
mtIsolate = 1.6mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm
mdWireWire = 10mil
mdWirePad = 8mil
mdWireVia = 8mil
mdPadPad = 8mil
mdPadVia = 8mil
mdViaVia = 8mil
mdSmdPad = 6mil
mdSmdVia = 6mil
mdSmdSmd = 6mil
mdViaViaSameLayer = 8mil
mnLayersViaInSmd = 2
mdCopperDimension = 15mil
mdDrill = 6mil
mdSmdStop = 0mil
msWidth = 10mil
msDrill = 10mil
msMicroVia = 10mil
msBlindViaRatio = 0.500000
rvPadTop = 0.250000
rvPadInner = 0.250000
rvPadBottom = 0.250000
rvViaOuter = 0.250000
rvViaInner = 0.250000
rvMicroViaOuter = 0.250000
rvMicroViaInner = 0.250000
rlMinPadTop = 6mil
rlMaxPadTop = 20mil
rlMinPadInner = 6mil
rlMaxPadInner = 20mil
rlMinPadBottom = 6mil
rlMaxPadBottom = 20mil
rlMinViaOuter = 6mil
rlMaxViaOuter = 20mil
rlMinViaInner = 6mil
rlMaxViaInner = 20mil
rlMinMicroViaOuter = 6mil
rlMaxMicroViaOuter = 20mil
rlMinMicroViaInner = 6mil
rlMaxMicroViaInner = 20mil
psTop = -1
psBottom = -1
psFirst = -1
psElongationLong = 100
psElongationOffset = 100
mvStopFrame = 1.000000
mvCreamFrame = 0.000000
mlMinStopFrame = 2.5mil
mlMaxStopFrame = 2.5mil
mlMinCreamFrame = 0mil
mlMaxCreamFrame = 0mil
mlViaStopLimit = 0mil
srRoundness = 0.000000
srMinRoundness = 0mil
srMaxRoundness = 0mil
slThermalIsolate = 10mil
slThermalsForVias = 1
dpMaxLengthDifference = 10mm
dpGapFactor = 2.500000
checkGrid = 0
checkAngle = 0
checkFont = 1
checkRestrict = 1
useDiameter = 13
maxErrors = 50