moved bme280 decoupling cap moved the bme280 decoupling cap a bit for aesthetic reasons.

Swapped Serial1 RX and TX Fixed an issue sending / receiving serial between the atmega32u4 and ublox max m8q by swapping the rx and tx pins on the atmega32u4.

Added Pull down to HWB pin added a 10k pull down resistor to HWB to resolve issues flashing the boot loader

v2 BME280 decoupling cap added decoupling cap to bme280 of v2 board.

BME280 Decoupling Cap Added a 100nf decoupling cap next to the bme280

Updated Silkscreen on Tracksoar V1.3 Added individual pin designators, moved silkscreen items away from vias, standardized designator and value font size.

Tracksoar V1.3 Created a new test board Tracksoar v1.3 to resolve potential issues with the boost converter interfering with GPS reception.

Corrected battery connector placement Moved the battery connector to the bottom side of the board to avoid conflicts with the USB connector

labelled headers added silkscreen labels to headers

Updated Silkscreen Updated capacitor values and schematic symbols. Updated silkscreen to remove overlaps and standardized text size.