README.md
influencair-pcb

A most simple version we could came up with for the luftdaten sensor.

<![CDATA[]]><![CDATA[]]>
(!! be carefull PCB Qty is still 250 !!)



BOM (bill of material)


1 x <![CDATA[]]>NodeMcu V3 Lolin<![CDATA[]]>
1 x <![CDATA[]]>DHT22<![CDATA[]]>
1 x <![CDATA[]]>SDS011 PM sensor + included white cable<![CDATA[]]>
1 x <![CDATA[]]>JST 5pin angled connector<![CDATA[]]>
3 x <![CDATA[]]>6mm nylon standoff<![CDATA[]]>
6 x <![CDATA[]]>5mm nylon screws<![CDATA[]]>
1 x optional 10K Ohm resistor
2 x 90° angle pvc pipe 75mm
1 x flexible tube 8mm


Info


Designed with EagleCAD
Based on <![CDATA[]]>luftdaten<![CDATA[]]> sensor
Inspiration from <![CDATA[]]>https://github.com/Naesstrom/airrohr-PCB<![CDATA[]]>
<![CDATA[]]>Gerber files<![CDATA[]]> made for seeedstudio fusion service. Standard pcb settings except color white, refects more heat then a black one.