enc28j60.h
/*
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software Foundation,
 * Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 *
 * The Original Code is Copyright (C) 2005 Pascal Stang
 * All rights reserved.
 *
 * Original Author: Pascal Stang
 * Contributor(s): Guido Socher
 *                 nuelectronics.com -- Ethershield for Arduino
 *                 Sergey Sharybin -- PIC18F4550 adoptation
 *
 * Microchip ENC28J60 Ethernet Interface Driver
 *
 * This driver provides initialization and transmit/receive
 * functions for the Microchip ENC28J60 10Mb Ethernet Controller and PHY.
 * This chip is novel in that it is a full MAC+PHY interface all in a 28-pin
 * chip, using an SPI interface to the host processor.
 */

#ifndef __ENC28J60_H__
#define __ENC28J60_H__

#include <stdint.h>

/* ENC28J60 Control Registers
 * Control register definitions are a combination of address,
 * bank number, and Ethernet/MAC/PHY indicator bits.
 * - Register address        (bits 0-4)
 * - Bank number             (bits 5-6)
 * - MAC/PHY indicator       (bit 7)
 */
#define ADDR_MASK        0x1F
#define BANK_MASK        0x60
#define SPRD_MASK        0x80

/* All-bank registers. */
#define EIE              0x1B
#define EIR              0x1C
#define ESTAT            0x1D
#define ECON2            0x1E
#define ECON1            0x1F

/* Bank 0 registers. */
#define ERDPTL           (0x00|0x00)
#define ERDPTH           (0x01|0x00)
#define EWRPTL           (0x02|0x00)
#define EWRPTH           (0x03|0x00)
#define ETXSTL           (0x04|0x00)
#define ETXSTH           (0x05|0x00)
#define ETXNDL           (0x06|0x00)
#define ETXNDH           (0x07|0x00)
#define ERXSTL           (0x08|0x00)
#define ERXSTH           (0x09|0x00)
#define ERXNDL           (0x0A|0x00)
#define ERXNDH           (0x0B|0x00)
#define ERXRDPTL         (0x0C|0x00)
#define ERXRDPTH         (0x0D|0x00)
#define ERXWRPTL         (0x0E|0x00)
#define ERXWRPTH         (0x0F|0x00)
#define EDMASTL          (0x10|0x00)
#define EDMASTH          (0x11|0x00)
#define EDMANDL          (0x12|0x00)
#define EDMANDH          (0x13|0x00)
#define EDMADSTL         (0x14|0x00)
#define EDMADSTH         (0x15|0x00)
#define EDMACSL          (0x16|0x00)
#define EDMACSH          (0x17|0x00)

/* Bank 1 registers. */
#define EHT0             (0x00|0x20)
#define EHT1             (0x01|0x20)
#define EHT2             (0x02|0x20)
#define EHT3             (0x03|0x20)
#define EHT4             (0x04|0x20)
#define EHT5             (0x05|0x20)
#define EHT6             (0x06|0x20)
#define EHT7             (0x07|0x20)
#define EPMM0            (0x08|0x20)
#define EPMM1            (0x09|0x20)
#define EPMM2            (0x0A|0x20)
#define EPMM3            (0x0B|0x20)
#define EPMM4            (0x0C|0x20)
#define EPMM5            (0x0D|0x20)
#define EPMM6            (0x0E|0x20)
#define EPMM7            (0x0F|0x20)
#define EPMCSL           (0x10|0x20)
#define EPMCSH           (0x11|0x20)
#define EPMOL            (0x14|0x20)
#define EPMOH            (0x15|0x20)
#define EWOLIE           (0x16|0x20)
#define EWOLIR           (0x17|0x20)
#define ERXFCON          (0x18|0x20)
#define EPKTCNT          (0x19|0x20)

/* Bank 2 registers. */
#define MACON1           (0x00|0x40|0x80)
#define MACON2           (0x01|0x40|0x80)
#define MACON3           (0x02|0x40|0x80)
#define MACON4           (0x03|0x40|0x80)
#define MABBIPG          (0x04|0x40|0x80)
#define MAIPGL           (0x06|0x40|0x80)
#define MAIPGH           (0x07|0x40|0x80)
#define MACLCON1         (0x08|0x40|0x80)
#define MACLCON2         (0x09|0x40|0x80)
#define MAMXFLL          (0x0A|0x40|0x80)
#define MAMXFLH          (0x0B|0x40|0x80)
#define MAPHSUP          (0x0D|0x40|0x80)
#define MICON            (0x11|0x40|0x80)
#define MICMD            (0x12|0x40|0x80)
#define MIREGADR         (0x14|0x40|0x80)
#define MIWRL            (0x16|0x40|0x80)
#define MIWRH            (0x17|0x40|0x80)
#define MIRDL            (0x18|0x40|0x80)
#define MIRDH            (0x19|0x40|0x80)

/* Bank 3 registers. */
#define MAADR1           (0x00|0x60|0x80)
#define MAADR0           (0x01|0x60|0x80)
#define MAADR3           (0x02|0x60|0x80)
#define MAADR2           (0x03|0x60|0x80)
#define MAADR5           (0x04|0x60|0x80)
#define MAADR4           (0x05|0x60|0x80)
#define EBSTSD           (0x06|0x60)
#define EBSTCON          (0x07|0x60)
#define EBSTCSL          (0x08|0x60)
#define EBSTCSH          (0x09|0x60)
#define MISTAT           (0x0A|0x60|0x80)
#define EREVID           (0x12|0x60)
#define ECOCON           (0x15|0x60)
#define EFLOCON          (0x17|0x60)
#define EPAUSL           (0x18|0x60)
#define EPAUSH           (0x19|0x60)

/* PHY registers. */
#define PHCON1           0x00
#define PHSTAT1          0x01
#define PHHID1           0x02
#define PHHID2           0x03
#define PHCON2           0x10
#define PHSTAT2          0x11
#define PHIE             0x12
#define PHIR             0x13
#define PHLCON           0x14

/* ENC28J60 ERXFCON Register Bit Definitions. */
#define ERXFCON_UCEN     0x80
#define ERXFCON_ANDOR    0x40
#define ERXFCON_CRCEN    0x20
#define ERXFCON_PMEN     0x10
#define ERXFCON_MPEN     0x08
#define ERXFCON_HTEN     0x04
#define ERXFCON_MCEN     0x02
#define ERXFCON_BCEN     0x01

/* ENC28J60 EIE Register Bit Definitions. */
#define EIE_INTIE        0x80
#define EIE_PKTIE        0x40
#define EIE_DMAIE        0x20
#define EIE_LINKIE       0x10
#define EIE_TXIE         0x08
#define EIE_WOLIE        0x04
#define EIE_TXERIE       0x02
#define EIE_RXERIE       0x01

/* ENC28J60 EIR Register Bit Definitions. */
#define EIR_PKTIF        0x40
#define EIR_DMAIF        0x20
#define EIR_LINKIF       0x10
#define EIR_TXIF         0x08
#define EIR_WOLIF        0x04
#define EIR_TXERIF       0x02
#define EIR_RXERIF       0x01

/* ENC28J60 ESTAT Register Bit Definitions. */
#define ESTAT_INT        0x80
#define ESTAT_LATECOL    0x10
#define ESTAT_RXBUSY     0x04
#define ESTAT_TXABRT     0x02
#define ESTAT_CLKRDY     0x01

/* ENC28J60 ECON2 Register Bit Definitions. */
#define ECON2_AUTOINC    0x80
#define ECON2_PKTDEC     0x40
#define ECON2_PWRSV      0x20
#define ECON2_VRPS       0x08

/* ENC28J60 ECON1 Register Bit Definitions. */
#define ECON1_TXRST      0x80
#define ECON1_RXRST      0x40
#define ECON1_DMAST      0x20
#define ECON1_CSUMEN     0x10
#define ECON1_TXRTS      0x08
#define ECON1_RXEN       0x04
#define ECON1_BSEL1      0x02
#define ECON1_BSEL0      0x01

/* ENC28J60 MACON1 Register Bit Definitions. */
#define MACON1_LOOPBK    0x10
#define MACON1_TXPAUS    0x08
#define MACON1_RXPAUS    0x04
#define MACON1_PASSALL   0x02
#define MACON1_MARXEN    0x01

/* ENC28J60 MACON2 Register Bit Definitions. */
#define MACON2_MARST     0x80
#define MACON2_RNDRST    0x40
#define MACON2_MARXRST   0x08
#define MACON2_RFUNRST   0x04
#define MACON2_MATXRST   0x02
#define MACON2_TFUNRST   0x01

/* ENC28J60 MACON3 Register Bit Definitions. */
#define MACON3_PADCFG2   0x80
#define MACON3_PADCFG1   0x40
#define MACON3_PADCFG0   0x20
#define MACON3_TXCRCEN   0x10
#define MACON3_PHDRLEN   0x08
#define MACON3_HFRMLEN   0x04
#define MACON3_FRMLNEN   0x02
#define MACON3_FULDPX    0x01

/* ENC28J60 MICMD Register Bit Definitions. */
#define MICMD_MIISCAN    0x02
#define MICMD_MIIRD      0x01

/* ENC28J60 MISTAT Register Bit Definitions. */
#define MISTAT_NVALID    0x04
#define MISTAT_SCAN      0x02
#define MISTAT_BUSY      0x01

/* ENC28J60 PHY PHCON1 Register Bit Definitions. */
#define PHCON1_PRST      0x8000
#define PHCON1_PLOOPBK   0x4000
#define PHCON1_PPWRSV    0x0800
#define PHCON1_PDPXMD    0x0100

/* ENC28J60 PHY PHSTAT1 Register Bit Definitions. */
#define PHSTAT1_PFDPX    0x1000
#define PHSTAT1_PHDPX    0x0800
#define PHSTAT1_LLSTAT   0x0004
#define PHSTAT1_JBSTAT   0x0002

/* ENC28J60 PHY PHCON2 Register Bit Definitions. */
#define PHCON2_FRCLINK   0x4000
#define PHCON2_TXDIS     0x2000
#define PHCON2_JABBER    0x0400
#define PHCON2_HDLDIS    0x0100

/* ENC28J60 Packet Control Byte Bit Definitions. */
#define PKTCTRL_PHUGEEN  0x08
#define PKTCTRL_PPADEN   0x04
#define PKTCTRL_PCRCEN   0x02
#define PKTCTRL_POVERRIDE 0x01

/* SPI operation codes. */
#define ENC28J60_READ_CTRL_REG       0x00
#define ENC28J60_READ_BUF_MEM        0x3A
#define ENC28J60_WRITE_CTRL_REG      0x40
#define ENC28J60_WRITE_BUF_MEM       0x7A
#define ENC28J60_BIT_FIELD_SET       0x80
#define ENC28J60_BIT_FIELD_CLR       0xA0
#define ENC28J60_SOFT_RESET          0xFF


/* The RXSTART_INIT should be zero. See Rev. B4 Silicon Errata
 * buffer boundaries applied to internal 8K ram
 * the entire available packet buffer space is allocated.
 */
/* Start with recbuf at 0. */
#define RXSTART_INIT     0x0
/* Receive buffer end. */
#define RXSTOP_INIT      (0x1FFF - 0x0600 - 1)
/* start TX buffer at 0x1FFF - 0x0600,
 * pace for one full ethernet frame (~1500 bytes).
 */
#define TXSTART_INIT     (0x1FFF - 0x0600)
/* stp TX buffer at end of mem. */
#define TXSTOP_INIT      0x1FFF
/* Max frame length which the conroller will accept.
 * NOTE: maximum ethernet frame length would be 1518
 */
#define MAX_FRAMELEN     1500
//#define MAX_FRAMELEN     600

void ENC28J60_WriteOp(uint8_t op, uint8_t addr, uint8_t data);
uint8_t ENC28J60_ReadOp(uint8_t op, uint8_t addr);
void ENC28J60_SetBank(uint8_t addr);
uint8_t ENC28J60_Read(uint8_t addr);
void ENC28J60_Write(uint8_t addr, uint8_t data);
void ENC28J60_PhyWrite(uint8_t addr, uint16_t data);
uint8_t ENC28J60_GetRev(void);
void ENC28J60_Init(uint8_t *macaddr);
void ENC28J60_ClkOut(uint8_t clk);
void ENC28J60_ReadBuffer(uint16_t len, uint8_t *data);
uint16_t ENC28J60_PacketReceive(uint16_t maxlen, uint8_t *packet);
void ENC28J60_WriteBuffer(uint16_t len, uint8_t *data);
void ENC28J60_PacketSend(uint16_t len, uint8_t *packet);

#endif  /* __ENC28J60_H__ */