config.kiplot.yaml
kiplot:
  version: 1

preflight:
  run_erc: true
  run_drc: true
  update_xml: true
  check_zone_fills: true
  ignore_unconnected: false
  filters:
    - filter_msg: 'Conflict problem between pins. Severity: error'
      error_number: 5
      regexp:  'in 1'


outputs:

#DOCS

  # For more information: https://github.com/INTI-CMNB/KiBoM
  - name: 'print schema'
    comment: "Print schematic (PDF)"
    type: pdf_sch_print
    dir: docs
#    options:
#      dnf_filter: [string|list(string)=''] Name of the filter to mark components as not fitted. A short-cut to use for simple cases where a variant is an overkill.
#      output: [string='%f-%i%v.%x'] filename for the output PDF (%i=schematic %x=pdf). Affected by global options.
#      variant: [string=''] Board variant to apply. Not fitted components are crossed.
  

  - name: 'print schema'
    comment: "Print schematic (SVG)"
    type: svg_sch_print
    dir: docs/img
#    options:
#      dnf_filter: [string|list(string)=''] Name of the filter to mark components as not fitted. A short-cut to use for simple cases where a variant is an overkill.
#      output: [string='%f-%i%v.%x'] filename for the output SVG (%i=schematic %x=svg). Affected by global options.
#      variant: [string=''] Board variant to apply. Not fitted components are crossed.
  

 
# GERBERS  
  - name: "https://en.wikipedia.org/wiki/Gerber_format"
    comment: 'gerbers'
    type: 'gerber'
    dir: 'gerbers'
    options:
      # [boolean=true] creates a file with information about all the generated gerbers.
      # You can use it in gerbview to load all gerbers at once
      create_gerber_job_file: false
      # [string|list(string)=''] Name of the filter to mark components as not fitted.
      # A short-cut to use for simple cases where a variant is an overkill
      dnf_filter: ''
      # [boolean=true] do not include the PCB edge layer
      exclude_edge_layer: true
      # [boolean=false] do not plot the component pads in the silk screen
      exclude_pads_from_silkscreen: false
      # [boolean=false] include references and values even when they are marked as invisible
      force_plot_invisible_refs_vals: false
      # [string='%f-%i%v.%x'] name for the gerber job file (%i='job', %x='gbrjob'). Affected by global options
      gerber_job_file: '%f-%i%v.%x'
      # [number=4.6] this the gerber coordinate format, can be 4.5 or 4.6
      gerber_precision: 4.6
      # [number=0.1] [0.02,2] line_width for objects without width [mm]
      line_width: 0.1
      # [string='%f-%i%v.%x'] output file name, the default KiCad name if empty. Affected by global options
      output: '%f-%i%v.%x'
      # [boolean=true] include the footprint references
      plot_footprint_refs: true
      # [boolean=true] include the footprint values
      plot_footprint_values: true
      # [boolean=false] currently without effect
      plot_sheet_reference: false
      # [boolean=false] substract the solder mask from the silk screen
      subtract_mask_from_silk: false
      # [boolean=true] cover the vias
      tent_vias: true
      # [boolean=false] use the auxiliar axis as origin for coordinates
      use_aux_axis_as_origin: true
      # [boolean=true] include netlist metadata
      use_gerber_net_attributes: true
      # [boolean=true] use the extended X2 format
      use_gerber_x2_attributes: true
      # [boolean=false] use legacy Protel file extensions
      use_protel_extensions: false
      # [string=''] Board variant to apply
      variant: ''
    layers: all

  # Gerber drill format:
  # You can create a map file for documentation purposes.
  # This output is what you get from the 'File/Fabrication output/Drill Files' menu in pcbnew.
  - name: 'https://en.wikipedia.org/wiki/Gerber_format'
    comment: 'drill'
    type: gerb_drill
    dir: gerbers
    options:
      # [dict|string] [hpgl,ps,gerber,dxf,svg,pdf] format for a graphical drill map.
      # Not generated unless a format is specified
      map:
        # [string='%f-%i%v.%x'] name for the map file, KiCad defaults if empty (%i='PTH_drill_map'). Affected by global options
        output: ''
        # [string='pdf'] [hpgl,ps,gerber,dxf,svg,pdf] format for a graphical drill map
        type: 'gerber'
      # [string='%f-%i%v.%x'] name for the drill file, KiCad defaults if empty (%i='PTH_drill'). Affected by global options
      output: '%f-%i%v.%x'
      # [dict|string] name of the drill report. Not generated unless a name is specified
      report:
        # [string=''] name of the drill report. Not generated unless a name is specified.
        # (%i='drill_report' %x='txt')
        filename: '%i.%x'
      # [boolean=false] use the auxiliar axis as origin for coordinates
      use_aux_axis_as_origin: false

  # Excellon drill format:
  # You can create a map file for documentation purposes.
  # This output is what you get from the 'File/Fabrication output/Drill Files' menu in pcbnew.
  - name: 'https://en.wikipedia.org/wiki/Gerber_format'
    comment: 'drill excellon'
    type: "excellon"
    dir: "gerbers"
    options:
      # [dict|string] [hpgl,ps,gerber,dxf,svg,pdf] format for a graphical drill map.
      # Not generated unless a format is specified
      map:
        # [string='%f-%i%v.%x'] name for the map file, KiCad defaults if empty (%i='PTH_drill_map'). Affected by global options
        output: '%f-%i%v.%x'
        # [string='pdf'] [hpgl,ps,gerber,dxf,svg,pdf] format for a graphical drill map
        type: 'gerber'
      # [boolean=true] use metric units instead of inches
      metric_units: true
      # [boolean=false] use a minimal header in the file
      minimal_header: false
      # [boolean=false] invert the Y axis
      mirror_y_axis: false
      # [string='%f-%i%v.%x'] name for the drill file, KiCad defaults if empty (%i='PTH_drill'). Affected by global options
      output: '%f-%i%v.%x'
      # [boolean=true] generate one file for both, plated holes and non-plated holes, instead of two separated files
      pth_and_npth_single_file: false
      # [dict|string] name of the drill report. Not generated unless a name is specified
      report:
        # [string=''] name of the drill report. Not generated unless a name is specified.
        # (%i='drill_report' %x='txt')
        filename: '%i.%x'
      # [boolean=false] use the auxiliar axis as origin for coordinates
      use_aux_axis_as_origin: false

  # For more information: https://github.com/INTI-CMNB/KiBoM
  - name: 'https://lcsc.com/'
    comment: 'bom.csv - lcsc'
    type: 'kibom'
    dir: 'gerbers'
    options:
      # [string|dict] BoM configuration file, relative to PCB.
      # You can also define the configuration here, will be stored in `config.kibom.ini`
      conf:
        # [list(dict)|list(string)] List of columns to display.
        # Can be just the name of the field
        columns:
          # [string=''] Name of the field to use for this column
          # field: ''
          # [list(string)|string=''] List of fields to join to this column
          # join: ''
          # [string=''] Name to display in the header. The field is used when empty
          # name: ''
          - field: Description
            name: Reference
          - Value
          - field: Footprint
            name: Package
          - field: Quantity Per PCB
            name: Quantity
#          - field: mpn
#            name: Manufacture Part Number
        # [list(list(string))] A series of values which are considered to be equivalent for the part name.
        # Each entry is a list of equivalen names. Example: ['c', 'c_small', 'cap' ]
        # will ensure the equivalent capacitor symbols can be grouped together.
        # If empty the following aliases are used:
        # - ['r', 'r_small', 'res', 'resistor']
        # - ['l', 'l_small', 'inductor']
        # - ['c', 'c_small', 'cap', 'capacitor']
        # - ['sw', 'switch']
        # - ['zener', 'zenersmall']
        # - ['d', 'diode', 'd_small']
        component_aliases: [['r', 'r_small', 'res', 'resistor'], ['l', 'l_small', 'inductor'], ['c', 'c_small', 'cap', 'capacitor'], ['sw', 'switch'], ['zener', 'zenersmall'], ['d', 'diode', 'd_small']]
        # [string=''] Column with links to the datasheet (HTML only)
        datasheet_as_link: ''
        # [string|list(string)=''] Column/s containing Digi-Key part numbers, will be linked to web page (HTML only)
        digikey_link: ''
        # [list(dict)] A series of regular expressions used to exclude parts.
        # If a component matches ANY of these, it will be excluded.
        # Column names are case-insensitive.
        # If empty the following list is used:
        # - column: References
        #   regex: '^TP[0-9]*'
        # - column: References
        #   regex: '^FID'
        # - column: Part
        #   regex: 'mount.*hole'
        # - column: Part
        #   regex: 'solder.*bridge'
        # - column: Part
        #   regex: 'test.*point'
        # - column: Footprint
        #   regex 'test.*point'
        # - column: Footprint
        #   regex: 'mount.*hole'
        # - column: Footprint
        #   regex: 'fiducial'
        # list(dict)] A series of regular expressions used to exclude parts. If a component matches ANY of these, it will be excluded.
        exclude_any:
          - column: Part
            regex: TestPoint
          - column: Part
            regex: LOGO
          - column: Part
            regex: Jumper
        # [string='Config'] Field name used to determine if a particular part is to be fitted (also DNC and variants)
        fit_field: 'Variant'
        # [boolean=true] Connectors with the same footprints will be grouped together, independent of the name of the connector
        group_connectors: true
        # [list(string)] List of fields used for sorting individual components into groups.
        # Components which match (comparing *all* fields) will be grouped together.
        # Field names are case-insensitive.
        # If empty: ['Part', 'Part Lib', 'Value', 'Footprint', 'Footprint Lib'] is used
        # group_fields: ['Part', 'Part Lib', 'Value', 'Footprint', 'Footprint Lib']
        group_fields: ['']
        # [boolean=false] Hide column headers
        hide_headers: false
        # [boolean=false] Hide project information
        hide_pcb_info: true
        # [boolean=true] Generate a separated section for DNF (Do Not Fit) components (HTML only)
        html_generate_dnf: true
        # [boolean=true] Exclude DNF (Do Not Fit) components
        ignore_dnf: true
        # [list(dict)] A series of regular expressions used to select included parts.
        # If there are any regex defined here, only components that match against ANY of them will be included.
        # Column names are case-insensitive.
        # If empty all the components are included
        # include_only:
          # [string=''] Name of the column to apply the regular expression
          # column: ''
          # `field` is an alias for `column`
          # [string=''] Regular expression to match
          # regex: ''
          # `regexp` is an alias for `regex`
        # [boolean=true] Component groups with blank fields will be merged into the most compatible group, where possible
        merge_blank_fields: false
        # [boolean=true] First column is the row number
        number_rows: false
        # [boolean=true] Each component group will be tested against a number of regular-expressions (see ``).
        test_regex: true
        # [boolean=false] Print grouped references in the alternate compressed style eg: R1-R7,R18
        use_alt: false
      # [string='HTML'] [HTML,CSV,XML,XLSX] format for the BoM
      format: 'CSV'
      # [number=1] Number of boards to build (components multiplier)
      number: 1
      # [string='%f-%i%v.%x'] filename for the output (%i=bom). Affected by global options
      output: '%f-%i%v.%x'
      # [string=','] CSV Separator
      separator: ','
      # [string=''] Board variant(s), used to determine which components
      # are output to the BoM. To specify multiple variants,
      # with a BOM file exported for each variant, separate
      # variants with the ';' (semicolon) character.
      # This isn't related to the KiBot concept of variants
      variant: ''
      
  - name: 'position'
    comment: '*_pos.csv'
    type: 'position'
    dir: 'gerbers'
    options:
      # [string|list(string)=''] Name of the filter to mark components as not fitted.
      # A short-cut to use for simple cases where a variant is an overkill
      dnf_filter: ''
      # [string='ASCII'] [ASCII,CSV] format for the position file
      format: 'CSV'
      # [boolean=true] only include the surface mount components
      only_smd: true
      # [string='%f-%i%v.%x'] output file name (%i='top_pos'|'bottom_pos'|'both_pos', %x='pos'|'csv'). Affected by global options
      output: '%f-%i%v.%x'
      # [boolean=true] generate two separated files, one for the top and another for the bottom
      separate_files_for_front_and_back: false
      # [string='millimeters'] [millimeters,inches] units used for the positions
      units: 'millimeters'
      # [string=''] Board variant to apply
      variant: ''

# IBOM
  - name: 'https://github.com/openscopeproject/InteractiveHtmlBom'
    comment: 'ibom.html'
    type: 'ibom'
    dir: 'docs/bom'
    options:
      # [string=''] List of comma separated blacklisted components or prefixes with *. E.g. 'X1,MH*'.
      # IBoM option, avoid using in conjunction with KiBot variants/filters
      blacklist: ''
      # [boolean=false] Blacklist components with empty value.
      # IBoM option, avoid using in conjunction with KiBot variants/filters
      blacklist_empty_val: false
      # [number=0] Board rotation in degrees (-180 to 180). Will be rounded to multiple of 5
      board_rotation: 0
      # [string='left-right'] [bom-only,left-right,top-bottom] Default BOM view
      bom_view: 'left-right'
      # [string='Sourced,Placed'] Comma separated list of checkbox columns
      checkboxes: 'Sourced,Placed'
      # [boolean=false] Default to dark mode
      dark_mode: false
      # [string|list(string)=''] Name of the filter to mark components as not fitted.
      # A short-cut to use for simple cases where a variant is an overkill.
      # Avoid using it in conjunction with with IBoM native filtering options
      dnf_filter: ''
      # [string=''] Name of the extra field that indicates do not populate status.
      # Components with this field not empty will be blacklisted.
      # IBoM option, avoid using in conjunction with KiBot variants/filters
      dnp_field: ''
      # [string=''] Comma separated list of extra fields to pull from netlist or xml file
      extra_fields: 'MPN'
      # [boolean=false] Hide footprint pads by default
      hide_pads: false
      # [boolean=false] Hide silkscreen by default
      hide_silkscreen: false
      # [boolean=false] Highlight pin1 by default
      highlight_pin1: true
      # [boolean=false] Include netlist information in output.
      include_nets: true
      # [boolean=false] Include track/zone information in output. F.Cu and B.Cu layers only
      include_tracks: true
      # [string='FB'] [F,FB,B] Default layer view
      layer_view: 'FB'
      # [string='ibom'] Output file name format supports substitutions:
      # %f : original pcb file name without extension.
      # %p : pcb/project title from pcb metadata.
      # %c : company from pcb metadata.
      # %r : revision from pcb metadata.
      # %d : pcb date from metadata if available, file modification date otherwise.
      # %D : bom generation date.
      # %T : bom generation time.
      # Extension .html will be added automatically.
      # Note that this name is used only when output is ''
      name_format: 'ibom'
      # [string=''] Path to netlist or xml file
      netlist_file: ''
      # [boolean=false] Do not blacklist virtual components.
      # IBoM option, avoid using in conjunction with KiBot variants/filters
      no_blacklist_virtual: false
      # [boolean=false] Do not redraw pcb on drag by default
      no_redraw_on_drag: false
      # [boolean=false] Normalize extra field name case. E.g. 'MPN' and 'mpn' will be considered the same field
      normalize_field_case: true
      # [string='%f-%i%v.%x'] Filename for the output, use '' to use the IBoM filename (%i=ibom, %x=html). Affected by global options
      output: '%f-%i%v.%x'
      # [boolean=false] Show fabrication layer by default
      show_fabrication: false
      # [string='C,R,L,D,U,Y,X,F,SW,A,~,HS,CNN,J,P,NT,MH'] Default sort order for components. Must contain '~' once
      sort_order: 'C,R,L,D,U,Y,X,F,SW,A,~,HS,CNN,J,P,NT,MH'
      # [string=''] Board variant to apply.
      # Avoid using it in conjunction with with IBoM native filtering options
      variant: ''
      # [string=''] Name of the extra field that stores board variant for component.
      # IBoM option, avoid using in conjunction with KiBot variants/filters
      variant_field: ''
      # [string=''] List of board variants to exclude from the BOM.
      # IBoM option, avoid using in conjunction with KiBot variants/filters
      variants_blacklist: ''
      # [string=''] List of board variants to include in the BOM.
      # IBoM option, avoid using in conjunction with KiBot variants/filters
      variants_whitelist: ''
      
      
# PLOTS
  # PcbDraw - Beautiful 2D PCB render:
  # Uses configurable colors.
  # Can also render the components if the 2D models are available
  - name: 'plot images of pcb TOP'
    comment: 'Exports the PCB as a 2D model (SVG, PNG or JPG).'
    type: 'pcbdraw'
    dir: 'docs/img'
    options:
      # [boolean=false] render the bottom side of the board (default is top side)
      bottom: false
      # [number=300] [10,1200] dots per inch (resolution) of the generated image
      dpi: 300
      # [string='svg'] [svg,png,jpg] output format. Only used if no `output` is specified
      format: 'svg'
      # [list(string)] list of components to highlight
      # highlight:
      # [list(string)] list of libraries
#v2.1      libs: ['/usr/share/pcbdraw/footprints/KiCAD-base']
      libs: ['/opt/pcbdraw/pcbdraw/lib']
      # [boolean=false] mirror the board
      mirror: false
      # [boolean=false] do not make holes transparent
      no_drillholes: false
      # [string='%f-%i.%x'] name for the generated file . Affected by global options
      output: '%f-%i.%x'
      # [boolean=false] show placeholder for missing components
      placeholder: false
      # [dict|None] replacements for PCB references using components (lib:component)
      remap:
      # [string|list(string)] [none,all] list of components to draw, can be also a string for none or all.
      # The default is none
      show_components: none
      # [string|dict] PCB style (colors). An internal name, the name of a JSON file or the style options
#v2.1      style: '/usr/share/pcbdraw/styles/jlcpcb-green-hasl.json'
      style: '/opt/pcbdraw/pcbdraw/styles/jlcpcb-green-hasl.json'      
      # [boolean=false] render V-CUTS on the Cmts.User layer
      vcuts: true
      # [string='visible'] [visible,all,none] using visible only the warnings about components in the visible side are generated
      warnings: 'none'

  - name: 'plot images of pcb BOTTOM'
    comment: 'Exports the PCB as a 2D model (SVG, PNG or JPG).'
    type: 'pcbdraw'
    dir: 'docs/img'
    options:
      # [boolean=false] render the bottom side of the board (default is top side)
      bottom: true
      # [number=300] [10,1200] dots per inch (resolution) of the generated image
      dpi: 300
      # [string='svg'] [svg,png,jpg] output format. Only used if no `output` is specified
      format: 'svg'
      # [list(string)] list of components to highlight
      # highlight:
      # [list(string)] list of libraries
#v2.1      libs: ['/usr/share/pcbdraw/footprints/KiCAD-base']
      libs: ['/opt/pcbdraw/pcbdraw/lib']
      # [boolean=false] mirror the board
      mirror: false
      # [boolean=false] do not make holes transparent
      no_drillholes: false
      # [string='%f-%i.%x'] name for the generated file . Affected by global options
      output: '%f-%i.%x'
      # [boolean=false] show placeholder for missing components
      placeholder: false
      # [dict|None] replacements for PCB references using components (lib:component)
      remap:
      # [string|list(string)] [none,all] list of components to draw, can be also a string for none or all.
      # The default is none
      show_components: none
      # [string|dict] PCB style (colors). An internal name, the name of a JSON file or the style options
#v2.1      style: '/usr/share/pcbdraw/styles/jlcpcb-green-hasl.json'
      style: '/opt/pcbdraw/pcbdraw/styles/jlcpcb-green-hasl.json'
      # [boolean=false] render V-CUTS on the Cmts.User layer
      vcuts: true
      # [string='visible'] [visible,all,none] using visible only the warnings about components in the visible side are generated
      warnings: 'none'