pumbaba / ossi - Files

    1 Branches
    Close Menu
    Help

    Files

    View on GitHub
    Install Extension
    Last update 11 months 4 weeks by Timon Fanac
    Filescircuitsinverter
    ..
    .gitignore
    AC_current_measurement.kicad_sch
    view raw
    AC_current_measurement.sch
    view raw
    AC_filter.kicad_sch
    view raw
    AC_filter.sch
    view raw
    AC_switch.kicad_sch
    view raw
    AC_switch.sch
    view raw
    DC_booster.kicad_sch
    view raw
    DC_booster.sch
    view raw
    DC_input.kicad_sch
    view raw
    DC_input.sch
    view raw
    OSSI_MK_I-cache.lib
    OSSI_MK_I.kicad_pcb
    view raw
    OSSI_MK_I.kicad_prl
    OSSI_MK_I.kicad_pro
    OSSI_MK_I.kicad_sch
    view raw
    OSSI_MK_I.pro
    OSSI_MK_I.sch
    view raw
    analog_frontend.kicad_sch
    view raw
    analog_frontend.sch
    view raw
    drivers.kicad_sch
    view raw
    drivers.sch
    view raw
    fp-lib-table
    highside_supply.kicad_sch
    view raw
    highside_supply.sch
    view raw
    interface.kicad_sch
    view raw
    inverter.kicad_sch
    view raw
    inverter.sch
    view raw
    main_controller.kicad_sch
    view raw
    main_controller.sch
    view raw
    power_supply.kicad_sch
    view raw
    power_supply.sch
    view raw
    readme.md
    sym-lib-table
    		 
    readme.md
    This directory contains all schematics for the inverter.
It is planned to place all components on a single board (electronics and power electronics) since this is the best way to keep the costs down and keep the system complexity low.
Mulitple boards require connectors and cables. Connectors can go bad over time (corroding contacts due to moisture), cables add their own problems due to EMI and ground bounce. The connection between cable and connector is an additional source for failure.
    Report a bug