Martin ROGER / VXDash - History

    Close Menu
    Help
    Emulator : ERC and footprints
    by Martin ROGER 5 months 3 weeks
    Emulator : ERC and footprints

    Also moving some 0402 capacitors to 0603...
    Changes
    Files
    6bcacb32
    ERC corrections, idiot lights
    by Martin ROGER 5 months 3 weeks
    ERC corrections, idiot lights

    - VXDash : added idiot lights (also to emulator board)
    - VXDash : corrected some ERC violations
    Changes
    Files
    7f64466b
    ESP32S3 Reference footprint
    by Martin ROGER 5 months 3 weeks
    ESP32S3 Reference footprint

    - VXDash : updating footprint to Espressif's official one.
    Changes
    Files
    1f899b13
    Connectors packaging and additions to main board
    by Martin ROGER 5 months 3 weeks
    Connectors packaging and additions to main board

    - DXF file for connector packaging and NO go zones on main PCB (see PR #41 notes )
    - Additional internal connectors for UART access to the display boards
    - DNP capacitor on EN. Good idea ?
    Changes
    Files
    fc6dfab7
    PCB layout in progress
    by Alex Miller 5 months 3 weeks
    PCB layout in progress

    Changed some pin assignments to aid routing.
    Changes
    Files
    72f0da62
    Emulator board refinements
    by Martin ROGER 5 months 4 weeks
    Emulator board refinements

    - Is there stupid with the Active Hi Optos so that the logic is not inverted ?
    - Added N-Mosfet activatable resistors. Stupidly simple ? Better MOSFET recommendation ?
    Changes
    Files
    e60486e3
    More changes (Primarily Remote ECU)
    by Martin ROGER 5 months 4 weeks
    More changes (Primarily Remote ECU)

    - Emulator board project to a functional skeleton
    - Connectors board with ignition routing on CAN pin 4 to have switched signal available in the harness.
    - Remote ECU : added 12V reduced protection circuit (to be reviewed)
    - Remote ECU : Removed integrated CAN termination (should be on harness)
    - Remote ECU : added CAN passthrough
    - Remote ECU : added MCPWM channels
    - Remote ECU : Added some opto inputs
    - Remote ECU : Added internal USB C (overkill ?)
    Changes
    Files
    4093b2ee
    Removing external 5V and replacing with 12VBatt
    by Martin ROGER 5 months 4 weeks
    Removing external 5V and replacing with 12VBatt

    For the sake of running 4 wires to the back that have +12V/CANH/CANL/GND
    Changes
    Files
    9e99d446
    Minor changes
    by Martin ROGER 5 months 4 weeks
    Minor changes

    - Connection for the caliber selection on the sensing circuit
    - Typo
    Changes
    Files
    8ee4ce5e
    Grape shot additions
    by Martin ROGER 5 months 4 weeks
    Grape shot additions

    - Added 0R to the VCC pin on the CAN transceiver for pin compatibility with other transceiver
    - Updated TODO box
    - Rename ADC_SDA and ADC_SCL to SDA and SCL
    - Official symbol and footprint from ESP, using ESP32-S3-WROOM-1-N16R8
    - Reassigned Coolant LOW to active HI
    - Replaced MUX with i²C TCA9555 IO Expander
    - Resequenced Active His and Lows to match current SW definition
    - Resequenced ADC channels to match current SW definition
    - Added simple peripherals for MCU
    - Added RESET and BOOT buttons circuits
    - Added CAN transceivers for each display, and Termination resistor
    - Added USB C
    Changes
    Files
    676e88c8
    Report a bug