Files
-
/ Mitayi-Pico-RP2040.kicad_pcb
-
/ Mitayi-Pico-RP2040.kicad_sch
-
Revisions / Mitayi-Pico-RP2040-r0.2 / Mitayi-Pico-RP2040-r0.2.kicad_pcb
-
Revisions / Mitayi-Pico-RP2040-r0.2 / Mitayi-Pico-RP2040-r0.2.kicad_sch
-
Revisions / Mitayi-Pico-RP2040-r0.3 / Mitayi-Pico-RP2040-r0.3.kicad_pcb
-
Revisions / Mitayi-Pico-RP2040-r0.3 / Mitayi-Pico-RP2040-r0.3.kicad_sch
-
Revisions / Mitayi-Pico-RP2040-r0.4 / Mitayi-Pico-RP2040-r0.4.kicad_pcb
-
Revisions / Mitayi-Pico-RP2040-r0.4 / Mitayi-Pico-RP2040-r0.4.kicad_sch
-
Revisions / Mitayi-Pico-RP2040-r0.5 / Mitayi-Pico-RP2040-r0.5.kicad_pcb
-
Revisions / Mitayi-Pico-RP2040-r0.5 / Mitayi-Pico-RP2040-r0.5.kicad_sch
-
Revisions / Mitayi-Pico-RP2040-r0.5 / Revisions / Mitayi-Pico-RP2040-r0.2 / Mitayi-Pico-RP2040-r0.2.kicad_pcb
-
Revisions / Mitayi-Pico-RP2040-r0.5 / Revisions / Mitayi-Pico-RP2040-r0.2 / Mitayi-Pico-RP2040-r0.2.kicad_sch
-
Revisions / Mitayi-Pico-RP2040-r0.5 / Revisions / Mitayi-Pico-RP2040-r0.3 / Mitayi-Pico-RP2040-r0.3.kicad_pcb
-
Revisions / Mitayi-Pico-RP2040-r0.5 / Revisions / Mitayi-Pico-RP2040-r0.3 / Mitayi-Pico-RP2040-r0.3.kicad_sch
-
Revisions / Mitayi-Pico-RP2040-r0.5 / Revisions / Mitayi-Pico-RP2040-r0.4 / Mitayi-Pico-RP2040-r0.4.kicad_pcb
-
Revisions / Mitayi-Pico-RP2040-r0.5 / Revisions / Mitayi-Pico-RP2040-r0.4 / Mitayi-Pico-RP2040-r0.4.kicad_sch
Last update 2 months 2 weeks
by
Vishnu Mohanan
README.mdView this project on CADLAB.io.
Mitayi Pico r0.2
Mitayi Pico is the first development board from CIRCUITSTATE Electronics. It is a small development board based on the RP2040 microcontroller from Raspberry Pi. The board is designed after the official Pico board from Raspberry Pi, but adds a few improvements over it.
The schematic and PCB are designed with KiCad, an open-source EDA tool. All the design files of Mitayi Pico are completely open-source and released under the MIT license.
Features & Differences
- RP2040 dual-core, 133MHz ARM Cortex M0+ microcontroller.
- 16MB Flash memory in SOIC-8 package.
- Dual USB port options; Type-C and Micro-USB.
- Dual voltage regulators; AMS1117 and MIC5219.
- Reset button.
- Solder jumper on debug LED.
- Breaks out all GPIO pins.
- Uses 0402 or larger SMD packages.
- Component references on the silkscreen.
- Mitayi-Pico is not pin-compatible with Raspberry Pico.
- Same dimensions of 21 mm x 50 mm, with almost the same positions for mounting holes.
- Completely open-source design made with KiCad 6.