Files
| Fileseeprom_binary | |
|---|---|
| .. | |
| README.md | |
| flash_alinx_ft232h.conf | |
| flash_digilent_hs2.conf | |
| flash_digilent_smt1.conf | |
| how_to_read_write_eeprom.md | |
| jtag-alinx-ft232h.bin | |
| jtag-hs2.bin | |
| jtag-lattice.bin | |
| jtag-smt1.bin |
README.mdThis folder already have 2 binary from 2 different board.
Digilent SMT1 for FT2232HL base board.
Digilent HS2 for FT232H base board (from Microphase board).
Digilent HS1 for FT232H base board (from Aliexpress).
I don't know if HS1 & HS2 make a different when in use in ISE/Vivado. Only test it on Vivado, because never used ISE anymore. Place it all here just in case.
Requirements
ftdi_eeprom - Linux
Is a small tool for reading/erasing/flashing FTDI USB chip eeproms.
Under ubuntu just install with this:
sudo apt-get install ftdi_eepromUnder Arch/Manjaro:
sudo pacman -S libftdiHow To Flash EEPROM
FT2232HL SMT1 base board
sudo ftdieeprom --flash-eeprom flashdigilent_smt1.confFT232H HS2 base board
sudo ftdieeprom --flash-eeprom flashdigilent_hs2.confFT232H HS1 base board
sudo ftdieeprom --flash-eeprom flashalinx_ft232h.conf