boards.txt
## Copyright (c) 2019, Ploopy Corporation, a Canadian federal corporation.
##
## This is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 3 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc.
## 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA

ploopymouse.name=Ploopy Trackball

ploopymouse.upload.tool=arduino:avrdude
ploopymouse.upload.protocol=avr109
ploopymouse.upload.maximum_size=28672
ploopymouse.upload.maximum_data_size=2560
ploopymouse.upload.speed=57600
ploopymouse.upload.disable_flushing=true
ploopymouse.upload.use_1200bps_touch=true
ploopymouse.upload.wait_for_upload_port=true

ploopymouse.bootloader.tool=arduino:avrdude
ploopymouse.bootloader.unlock_bits=0x3F
ploopymouse.bootloader.lock_bits=0x2F
ploopymouse.bootloader.low_fuses=0xFF
ploopymouse.bootloader.high_fuses=0xD8
ploopymouse.bootloader.extended_fuses=0xFE
ploopymouse.bootloader.file=Caterina-Leonardo.hex

ploopymouse.build.board=AVR_PLOOPYTRACKBALL
ploopymouse.build.core=arduino:arduino
ploopymouse.build.variant=arduino:leonardo
ploopymouse.build.mcu=atmega32u4
ploopymouse.build.usb_product="Ploopy Trackball"
ploopymouse.build.vid=0x1209
ploopymouse.build.pid=0x3A00
ploopymouse.build.f_cpu=8000000L
ploopymouse.build.extra_flags={build.usb_flags}