Joel Bradshaw / KinT - History

    Close Menu
    Help
    silkscreen: mark LED cathodes very explicitly
    by Michael Stapelberg 5 years 1 month
    Changes
    Files
    0d6c64d6
    switch from 0R resistors to solder jumpers (thanks...
    by Michael Stapelberg 5 years 1 month
    switch from 0R resistors to solder jumpers (thanks mxf)
    Changes
    Files
    7076e01e
    teensy: add teensy++ 2.0 RST/GND/5V pins in correc...
    by Michael Stapelberg 5 years 1 month
    teensy: add teensy++ 2.0 RST/GND/5V pins in correct spot

    They differ by one pin between the 3.x series and the teensy++.
    Changes
    Files
    e8462c31
    fix top mounting hole: was 5mm, should be 6mm
    by Michael Stapelberg 5 years 1 month
    Changes
    Files
    0c338334
    move right_13_down and left_13_lt a few millimeter...
    by Michael Stapelberg 5 years 1 month
    move right_13_down and left_13_lt a few millimeters up

    For less strain on the FPC cables, on both KB500 and KB600.
    Changes
    Files
    630c7e71
    README: describe possible teensy combinations
    by Michael Stapelberg 5 years 1 month
    Changes
    Files
    826408a5
    update artifacts
    by Michael Stapelberg 5 years 1 month
    Changes
    Files
    d587e835
    update PCB revision
    by Michael Stapelberg 5 years 1 month
    Changes
    Files
    931011a2
    update schematic revision
    by Michael Stapelberg 5 years 1 month
    Changes
    Files
    bbff1791
    make some space at the edges of the PCB
    by Michael Stapelberg 5 years 1 month
    Changes
    Files
    fa37b4d1
    Report a bug