gaensli / Icebreaker - History

Added the mousebytes back that got removed by accident.

Added pin mapping legend on the back of the break-off section.

Thank you for the suggestion @kbob! This closes #21

Added easier way for adding "piggyback" SPI RAM.

Added a pad near the SPI flash CS pin. This pad is connected to ~LEDG.
This will allow us to solder on an SPI RAM chip on top of the SPI flash
chip and connect it's CS line to ~LEDG signal. Allowing us to use the
flash and RAM through the same SPI interface.

This closes #19 for the V1.0c milestone. We will revisit this topic for
V2.0 milestone.

Added jumper from ADBUS3 to ~LEDR. Closes #18

Thanks for the suggestion @smunaut :D

Mechanical adjustments, added stabilization cupons and more.

* Rounded the main board corners to match mouting hole centers
* Decreased mounting hole size to 3.2mm diameter for tighter fit and
more edge material.
* Removed radiusses on the breakoff section tabs and added corner
drills, to make for an easier and cleaner break.
* Added (currently blank) coupons in the empty areas around the
break-off section. This will add stability in shipping and allow us to
fill the area with hopefully something useful. If not something silly.
:)