readMe.txt
Revision 2 change log: 
1) Added base bias resistors to each transistor
2) Added decoupling cap on voltage dividers
3) Replaced MOSFET with BJT on battery detection circuit
4) Fix resistor labels on PCB (swapped R35 & R37)
5) Replaced on board voltage booster with module
6) Added protection diodes between uC & motor driver ICs 
7) Fixed resistors naming position near terminal block connectors to be more visible
8) Added ON/OFF switch
9) Added pull up resistor on EN pin of booster
10) Removed input Mosfet & it's controlling circuitry placed after the solar connector
11) Changed package of diodes

Revision 3 change log:
Date: 12-07-24
Version: Euro_v3A_3
1) Added ufl antenna connector on PCB.