README.md
Layout


Jacks at the top, controls at the bottom
14mm spacing between jacks (center to center) in both directions
Knob/switch spacing?
1HP=1/5"=5.08mm


standard graph paper is 5 squares per inch, meaning exactly 1 real world HP per square

84 HPs (426mm) of usable horizontal space in a 19" rack
3U=128.5mm


112.5mm of useable vertical space after leaving room for mounting screws

Maximum control density:


jacks = 14mm wide, 9mm high (12+ recommended)
knobs = 22mm square (30mm recommended)
note: some knobs have 21mm base and need to be bigger

each jack is 3HP wide, each knob is 5 or 6HP wide


Reference for dimensions: <![CDATA[]]>http://www.doepfer.de/a100_man/a100m_e.htm<![CDATA[]]>

Panels

This series of posts is super helpful for aluminum panel cutting and applying graphics with transfer paper:


<![CDATA[]]>https://syntherjack.net/eurorack-module-diy-tutorial-1-drilling/<![CDATA[]]>
<![CDATA[]]>https://syntherjack.net/eurorack-module-diy-tutorial-2-graphics/<![CDATA[]]>


Case

TipTop is good starter product, has it has adapter for mounting modules in 19" rack, and included power supply

Power supply:


2000mA at +12V
500mA at -12V
170mA at +5V
<![CDATA[]]>https://www.amazon.com/Tiptop-Audio-Happy-Ending-Kit/dp/B074B29GPR<![CDATA[]]>