Dennis Field / dvk-mx8m-bsb - History

Include address in schematic notes for all I2C1 slaves, make HDMI connector shielding resistor to GND 0Ohms

Add IRQ# signal coming from the RTC, go over the SoM pins and fix lingering errors that are found

Modify the CSI circuit to use a 02x15 connector for potential use with the CO8725-B5SA-E camera, include cap touch FPC connector details, make minor adjustments to GNSS antenna circuit

added pdf-file with new ideas for placement (board size taller but narrower, room for diversity antennas in upper part)

Add WWAN and WLAN+BT MHF4 coax connectors and antennae symbols to the schematic, remove home and back buttons, reorder sheets so that GNSS is above the haptic motor sheet

added pdf with experimental placing of main components on a board size of 160 x 100

Assign UART3 to the GNSS module, remove this UART3 from the WWAN M.2 and assign GPIO5_IO03 to DPR

modifications to library symbol and footprint of ethernet magjack

added component information and footprint for ethernet magjack