Dennis Field / dvk-mx8m-bsb - History

Adjust the SoM outline footprint by rotating it 90 degrees and making the reference and value text the standard size (reference is now invisible), did the same for the SoM connector footprint (reference is visible), added baseboard connector 3D model to the EmCr_SOM_IMX8M_Connector footprint, removed the P1 connector from the SoM 3D model since P1 is now assigned to the EmCr_SOM_IMX8M_Connector footprint

added library symbol for short internal coaxial cables (from u.FL connector of M.2/MiniPCIE Card to ceramic antenna).
This component is not appearing at the pcb. The library symbols serves only as a memory aid.
Supplier information can be linked to it and should appear then on the BoM.

Small change in footprint assignment of the SOM:
Old situation:
First footprint of the SOM contains outline, mounting holes, footprint of P1 and markers for positions of P2, P3 and P4.
Second, third and forth footprint contain only P2..P4 connectors.
This situation leads to a problem with the BoM, because the 4 identical connectors could not be grouped together.

New situation:
Outline, mounting holes and position markers are now located in the footprint which is assigned to the SOM placeholder
4 identical footprints assigned to the SOM's connectors P1..P4 contain only the connector footprint.
This shouldn't cause problems with the BoM.

Add mounting holes to the schematic and assign the associated M2 hole footprint, add fiducial marks to schematic and assign the associated 1mm diameter copper with 2mm diameter solder mask opening footprint, make various visual adjustments throughout the schematic

Make a few minor aesthetic adjustments to the schematic

Assign "mpcie-outline" footprint to the ModemCard schematic symbol

Replace logic gate packages with cheaper options, change associated footprints to ones which match the cheaper alternatives