Dennis Field / dvk-mx8m-bsb - History

Route the rest of the camera circuit, add meanders to the clock and D1 diff pairs so that the skew between the clock and data-lines is 0 (still need to do intra-pair skew/phase), add the pull-up resistors to I2C3, add a 3V3_P filled zone around the whole board on the In3.Cu layer

Place and begin routing the camera, move the haptic motor to the "back" (side with the display) at a spot with its connector where there are no obstructions, move the slide switches to the "back-right" (front-left facing the display upright) and the ONOFF/volume buttons to the "front-left" (back-right facing the display upright)

Double check and update the SF56S006V4BR2000 micro-SIM socket footprint

Move the speaker's filter closer to the speaker, increase the speaker's trace widths to 0.8mm, do some minor adjustments to the USB diff pairs

Wiring of (M.2)-I2C level shifters, M.2 bypass caps.

Routed Wifi-SDIO and BT-RXD/TXD signals.
Placed glue logic of M.2 card.

Update the micro-SIM slot footprint's keepout zone which was overlapping with the DSW2 pad and was generally the incorrect size/position

The rest of the footprint still needs to be double checked after finding this error.

Begin laying out the WWAN/BB antenna footprint, including its feedline dimensions and clearance area, add 3D models for the push button and slide switch