Dennis Field / dvk-mx8m-bsb - History

Add FDV301N footprint based on the manufacturer's given recommended land pattern, use lower ESR 220uF tantalum capacitors in place of previously selected ones, re-export the BoM

Double checked FET footprints to make sure those assigned to the official SOT-23 footprint are correct.

Add BLM18PG121SN1D chip ferrite beads to the GNSS, proximity+ambient light sensor, and IMU +3.3V power pins

Use the MX25L1606EZNI manufacturer's recommended land pattern

A combination of Macronix's "Recommended PCB Pad Layouts for 8-USON & 8-WSON Packages" (page 4) and "Macronix 209mil 8-SOP and 6x5mm 8-WSON Dual Layout" app notes were used in conjunction with KiCad's official DFN-S-8-1EP_6x5mm_Pitch1.27mm footprint to give a well-rounded pattern.

Add MIC2876 5V boost converter's footprint, assign it, assign it the DFN-8 3D model

Move the WLAN+BT M.2 sheet back to page 18 rather than the last page (24)

Add AC coupling caps to the HDMI_AUXP/N diff pair which were mistakenly left out, fix a couple typos/errors that were made when transitioning to the new top-leve sheet, make the M.2s' I2C RX TX hierarchical signals consistent and clearer

Hopefully all lingering errors have been caught, this will likely be the schematic commit that gets reviewed (fingers crossed).

Assign TLV3201AIDBVR footprint based on the SOT-23-5 official footprint using the given solder mask clearance and pad clearance parameters, assign the QFN48 3D model to the ETH PHY footprint, make some minor adjustments to the front sheet's layout

Move more symbols, sheets, and pins around on the front sheet to make it even clearer, bring back the old hierarchical structure (again), bring back each sheet's title, add large text "titles" to each sheet reflecting what they are for

Still need to double check everything on the first page.

Small visual enhancements on top level page - e. g. at least one grid space around schematic blocks.
Double-labelled I2C busses to indicate clearly that they are point-to-multipoint connections and not just point to point.
Reduced drawing field and logo a bit in size (saves space).