Dennis Field / dvk-mx8m-bsb - History

Deleted or repaired some errors introduced (by me) as kicad beginner (improper use of diff pairs, parts being off grid etc).

Updated speaker footprint with cutout/milling under it and larger pads for hand soldering.

Move and route the NC resistors around the USB-C TPCP IC

Re-route the remaining parts of the USB-C circuit which had passives changed to 0402

Re-route the components which became 0402 around the USB-C superspeeed switch IC

Change all 0603 capacitors _EXCEPT_ the 2.2uF, 4.7uF, 8.2uF, 10uF, and 22uF caps to 0402

Moved components of ethernet interface into new position (reduced airwire crossings).

Place and route the rest of the battery sheet circuit, place and route the 10k (non-NC) resistors near the TCPC, route the EN_SRC and EN_SNK lines

TCPC still needs to be completed

Routed and connected some passive components around the ethernet interfaces.

Detected and corrected numbering error with MagJack J1701.
Eventually error with missing VCC of Pin 1 of J1707 (to be checked).