Dennis Field / dvk-mx8m-bsb - History

Add IRQ# signal coming from the RTC, go over the SoM pins and fix lingering errors that are found

Assign UART3 to the GNSS module, remove this UART3 from the WWAN M.2 and assign GPIO5_IO03 to DPR

modifications to library symbol and footprint of ethernet magjack

Begin GNSS schematic using MAX-M8 module

Since UART2 isn't brought out then will either need to use UART1 (debug) with jumpers or the module's I2C interface.

Resolve merge conflict after pulling recent commit, now can no longer use SSH (since Gogs is getting abandoned?).

added footprints for switches and phone jack
new wiring of DPDT switches for HKS purposes

Add camera/CSI circuit, include second switch that is part of the audio+camera DPDT for killing both simultaneously, level shifters used for camera's I/O that requires it, footprints for a 1.8V LDO which may be used by DVDD will be included

External DVDD (1.8V LDO) needs to be tested if it's needed (datasheet says an internal DVDD can be used, as is the case with Boundary Devices' OV5640 camera).

Add bypass caps to logic gates used with the W_DISABLE and the 9-axis IMU's INT pins

Use the 2SK3018 NMOS for all low-current applications such as level-shifting

Nearly complete the LCD/DSI and cap-touch schematic, add notes from the display's datasheet regarding the various pin assignments, add component property information for the 39-pin DSI clamshell connector

Still need to determine what this requested "low power state signal" requirement is for the display.

Add smart card circuit using the SEC1110 USB to ISO/IEC 7816 bridge chip, include ID-0001/2FF/mini-SIM socket connector selection informatino (1010027182)

Need to create footprint for the mini-SIM socket