Dennis Field / dvk-mx8m-bsb - History

new structure of first page in the schematics
more direct connections instead of labels
interconnection of schematic blocks (e.g. USB hub) is made visible
format of page is now A3 instead of A2 -> better font quality when printed on small paper

added company logo and designers email addresses into drawing area
new library with symbol of Emcraft-SOM (for later use)

Add quartz crystal footprints, reassign BHC-18650-1P footprint & associated component properties, add BHC-18650-1P 3D model

Add FET (Q* reference designators) footprints

Some footprints are slightly edited versions of their KiCad official library equivalents, using the existing 3D models. DMG2301L's SOT-23 footprint is identical to the official one in the KiCad library.

Connect VCC of the USB1_VBUS comparitor (TLV3201AIDBVR) to 5V_SOM instead of 5V_P so that VBUS presence can be detected quickly enough for the USB Serial Downloader bootmode, connect the TVS diodes on the HDMI receptacle to the proper pins

Add 103HT thermistor footprint and 3D model which is used to monitor the 18650 battery temperature (will be located right under the batter within the holder)

Used the SOD-123 model, added a thin layer on top of it to cover the polarity marking in FreeCAD, scaled the model in KiCad by 0.4.

Add polyfuse/PTC resettable fuse footprints and 3D models

Assign footprints and component properties to all diodes (including LEDs)

Using Lite-On's LTST-C190GKT (0603, 2.1V @ 20mA) instead of Broadcom's HSMG-C170 (0805, 2.2V @ 20mA) in the ethernet circuit.