Dennis Field / dvk-mx8m-bsb - History

Add camera/CSI circuit, include second switch that is part of the audio+camera DPDT for killing both simultaneously, level shifters used for camera's I/O that requires it, footprints for a 1.8V LDO which may be used by DVDD will be included

External DVDD (1.8V LDO) needs to be tested if it's needed (datasheet says an internal DVDD can be used, as is the case with Boundary Devices' OV5640 camera).

Modify the boot config/boot mode pins and switch such that only eMMC and USB (serial downloader) are boot options due to the uSD being attached to the USB<->SD bridge chip, add OV5460 notes about using the internal DVDD 1.5V regulator

Add smart card circuit using the SEC1110 USB to ISO/IEC 7816 bridge chip, include ID-0001/2FF/mini-SIM socket connector selection informatino (1010027182)

Need to create footprint for the mini-SIM socket

Move MIPI DSI & CSI sheets into a "MIPI" sheet, both DSI and CSI will likely use the I2C level shifter

Add MIPI CSI sheet (contents need to be added once camera selection is complete)