Kiplot_config.yaml
# Example KiPlot config file
kiplot:
  version: 1

preflight:

  # one day....
  check_zone_fills: false
  run_drc: false

outputs:

  - name: 'gerbers'
    comment: "Gerbers for the board house"
    type: gerber
    dir: gerberdir
    options:
      # generic layer options
      plot_sheet_reference: false
      plot_footprint_values: false
      plot_footprint_refs: true
      force_plot_invisible_refs_vals: false
      exclude_edge_layer: true
      exclude_pads_from_silkscreen: true
      tent_vias: true
      use_aux_axis_as_origin: true
      check_zone_fills: true

      # gerber options
      line_width: 0.1
      use_protel_extensions: true
      create_gerber_job_file: true
      subtract_mask_from_silk: true
      gerber_precision: 4.6
      use_gerber_x2_attributes: false
      use_gerber_net_attributes: false

    layers:
      - layer: F.Cu
        suffix: F_Cu
      - layer: B.Cu
        suffix: B_Cu
      - layer: F.Paste
        suffix: F_Paste
      - layer: B.Paste
        suffix: B_Paste
      - layer: F.SilkS
        suffix: F_SilkS
      - layer: B.SilkS
        suffix: B_SilkS
      - layer: F.Mask
        suffix: F_Mask
      - layer: B.Mask
        suffix: B_Mask
      - layer: Dwgs.User
        suffix: Dwgs_User
      - layer: Cmts.User
        suffix: Cmts_User
      - layer: Edge.Cuts
        suffix: Edge_Cuts

  - name: excellon_drill_drl
    comment: "Excellon drill files"
    type: excellon
    dir: gerberdir
    options:
      mirror_y_axis: false
      use_aux_axis_as_origin: true
      pth_and_npth_single_file: false
      metric_units: true
      minimal_header: false
      map:
        type: 'gerber'
      report:
        filename: 'drill_report.rpt'


  # - name: gerber_drills_gerber
  #   comment: "Gerber drill files"
  #   type: gerb_drill
  #   dir: gerberdir
  #   options:
  #     mirror_y_axis: false
  #     use_aux_axis_as_origin: true
  #     pth_and_npth_single_file: false
  #     metric_units: true
  #     minimal_header: false
  #     map:
  #       type: 'gerber'

  # - name: SVG
  #   comment: "Manufacturing Drawings Front normal"
  #   type: svg
  #   dir: Manuf_Drawings
  #   options:
  #     # generic layer options
  #     plot_sheet_reference: false
  #     plot_footprint_values: false
  #     plot_footprint_refs: true
  #     force_plot_invisible_refs_vals: true
  #     exclude_edge_layer: false
  #     exclude_pads_from_silkscreen: false
  #     tent_vias: true
  #     check_zone_fills: true
  #     # SVG specific options
  #     drill_marks: "small"
  #     line_width: 0.1
  #     mirror_plot: false
  #     negative_plot: false
  #   layers:
  #     - layer: F.Fab
  #       suffix: F_Fab
  #     - layer: F.SilkS
  #       suffix: F.SilkS

  # - name: SVG
  #   comment: "Manufacturing Drawings Back Mirrored"
  #   type: svg
  #   dir: Manuf_Drawings
  #   options:
  #     # generic layer options
  #     plot_sheet_reference: false
  #     plot_footprint_values: false
  #     plot_footprint_refs: true
  #     force_plot_invisible_refs_vals: true
  #     exclude_edge_layer: false
  #     exclude_pads_from_silkscreen: false
  #     tent_vias: true
  #     check_zone_fills: true
  #     # SVG specific options
  #     drill_marks: "none"
  #     line_width: 0.1
  #     mirror_plot: true
  #     negative_plot: false
  #   layers:
  #     - layer: B.Fab
  #       suffix: B.Fab
  #     - layer: B.SilkS
  #       suffix: B_SilkS