t3ddftw / BlueBus - History

[IMP] bootloader: Serial Number and Build Date
* Add Commands to read and write the serial and build date to the bootloader
* Fix bug with commands not making it back from the BL when switching the UART source

[IMP] application: Firmware 1.0.9.40

* Improve support for Comfort Locks
* Improve UI Auto-detection
* Create functionality to switch UIs without a reboot
* Create bit-map structs to reduce memory footprint
* Identify cluster type (low / high)
* Improve BMBT Menus

[IMP] application: Firmware 1.0.9.29

* Telephone Status LEDs are now used to indicate if a phone is connected to the BlueBus or not (MID / Navigation users only)
* Telephone status is sent to the system, so the "TEL" button the MID and "Telephone" option in the Navigation menu will now appear and populate a menu. None of those options work, though!
* The Telephone "Overlay" is now displayed when on a call on the Navigation screen. The "Phone" button that gets display doesn't do anything yet, though.
* Improved Vehicle Auto Detection
* The Number "4" on the Navigation Monitor now activate the Microphone Bias generator -- Do not use this if you don't know what that means -- it's probably already enabled anyways.
* "SET LOCKS ON" in a serial console will enable Comfort Locks, which work like so:
* Lock doors at 20km/h
* Unlock doors when the car is turned off
* C43 UI works properly after radio is powered off and back on again
* UI Auto-Detection is here! Please make sure your UI comes back to normal. This is a HUGE deal as it will mean that the BlueBus will be able to automatically configure itself based on what modules it "sees", and then populate the correct UI.
* The MID UI now plays nicely with the OBC menu and the Audio settings
* The MKIII/MKIV detection works consistently
* Vehicle type auto detection -- The LCM is now queried for the vehicle VIN, and if that VIN doesn't match what the BlueBus has stored, it will ask the IKE (Cluster) for the vehicle type. Please make sure this is correct when viewing settings.
* It is now possible to force the DSP to utilize the digital input, even if your car has the 6 pin connector. Higher fidelity audio can be expected with this mod. You'll need to enable it through a terminal with the following command: set dsp input digital
* Minor bug was fixed which caused metadata to not update on the BMBT when first returning to the Dashboard.

[IMP] hardware: Add via to create ground pour
* Add VIA to area without a GND pour
* Alter AGND routing slightly

[IMP] firmware: Application 1.0.1.17
* Rename Autolocks to Comfort Locks
* Add code to read oil temp from LCM
* Request LCM I/O status at IGN 1
* Improve Main Area updating for BMBT UI
* Add Play/Pause button listening from BMBT to CD53 code in order to support the Monochrome Nav

[IMP] hardware: Production V1
* Fix issue with silkscreen names
* Add ground VIA

[FIX] firmware: Actually consult config before unlocking