[IMP] hardware: v1.5 Updates * Replace ETQ-P4M100KFN 10uH inductor with MPL-SE5040 * Remove 100nF cap from 5v vreg output * Renumber Capacitors * Add 22uF caps to 3v3 vreg input and output for better transient response

[IMP] firmware: Application 1.1.17 * Finalize release * Fix CD53 Settings UI issues

[IMP] hardware: v1.6: Minor updates * Re-add 10k resistors to BC127 UART lines * Minor rewiring work around the TMUX154

[IMP] hardware: v1.1.6 * Re-wire BC127 power input for use with fixed regulated voltage, rather than battery power

[IMP] firmware: Application 1.1.17 beta 7 * Add Self Play ability for cars without an I-Bus Changer * Shuffle configuration parameters around

[IMP] firmware: Application 1.1.17 * I18n improvements * Catch for BC127 boot failure. Red TEL LED is now blinked to signify a fault * Added Config "Values" rather than "Settings" * Fix "Main Menu" String for BMBT * Add BC127 Boot fail counter * Remove useless linker file * Fix for newer CD53s not making use of 2 correctly * Fix for CD53 call detection. Change call state before block to ignore setting of I-Bus TEL state to "call active"

[IMP] utility: Mode Change and Python Env * Set Env to py3 * Add x bit to console_firmware_tool.py

[IMP] firmware: Application 1.1.17-beta * Allow arbitrary blinker selection for CD53/MID UI (1-8 blinks) * Add Dutch language * Update Spanish Language * Change code length to 0xA8E00 as bootloaders up to 1.4 only erase flash up to 0xAA800 * Styling updates

[IMP] utility: Improvements * Read hex file all the way to the end of the PICs memory range (0xAA800) * Only write the blocks with opcodes present (Ignore 0xFF)

[IMP] firmware: Bootloader v1.5 * Alter code so flash space up to 0xABEFF is erased when we query the device to erase flash