[IMP] utility: Add CVC Tool * Add CVC tool

[IMP] utility: Bootloader Protocol Updates * Add BT DFU mode * Add progress bar to console firmware tool * Replace "BC127" with "BT" * Add support for Bootloader 2.0

[IMP] firmware: TCU Mode Bugfix * Ensure TCU mode is used unless the DSP mode is set to SPDIF

[IMP] hardware: v2 Bugfixes * Re-number capacitors per convention and ensure proper placement

[IMP] hardware: v2 Bugfixes * Update bottom silkscreen

[IMP] hardware: v2 Bugfixes * Ensure 100nF caps are closest to pins instead of 10uF/1uF * Fix bottom silkscreen * Fix recovery slider silkscreen * Renumber passives per convention (counter-clockwise)

[IMP] hardware: v2 Bugfixes * Add missing ground plane for GND_FLT on bottom layer * Point all cathodes in the same directory for the three LEDs

[IMP] hardware: v2 Bugfixes * Swap BT UART lines * Move MCU_VER to pin 6 of PIC24 as pin 65 was used in 1.x * Swap MCLK and BCLK on DIT4096 * Add Cutout to board edge for panelization * Add diagonal fiducial

[IMP] hardware: V2 System UART Fix * Swap URX/UTX pins to maintain the same mapping as 1.x boards

[IMP] hardware: V2 silkscreen * Add fiducial markings * Fix issues with silkscreen