firmware_update_adc.cc
// Copyright 2016 Olivier Gillet.
//
// Author: Olivier Gillet (ol.gillet@gmail.com)
//
// Permission is hereby granted, free of charge, to any person obtaining a copy
// of this software and associated documentation files (the "Software"), to deal
// in the Software without restriction, including without limitation the rights
// to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
// copies of the Software, and to permit persons to whom the Software is
// furnished to do so, subject to the following conditions:
// 
// The above copyright notice and this permission notice shall be included in
// all copies or substantial portions of the Software.
// 
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
// THE SOFTWARE.
// 
// See http://creativecommons.org/licenses/MIT/ for more information.
//
// -----------------------------------------------------------------------------
//
// Drivers for the 12-bit ADC used for firmware updates through the MODEL CV in.

#include "plaits/drivers/firmware_update_adc.h"

#include <stm32f37x_conf.h>

namespace plaits {

void FirmwareUpdateAdc::Init() {
  // Enable ADC clock.
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1, ENABLE);
  RCC_ADCCLKConfig(RCC_PCLK2_Div8);
  
  // Enable GPIO clock.
  RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOB, ENABLE);
  RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOA, ENABLE);
  
  // Enable DMA1 clock.
  RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE);
  
  DMA_InitTypeDef dma_init;
  ADC_InitTypeDef adc_init;
  GPIO_InitTypeDef gpio_init;
  
  // Configure the two analog inputs.
  gpio_init.GPIO_Pin = GPIO_Pin_1;
  gpio_init.GPIO_PuPd = GPIO_PuPd_NOPULL;
  gpio_init.GPIO_OType = GPIO_OType_PP;
  gpio_init.GPIO_Mode = GPIO_Mode_AN;
  GPIO_Init(GPIOB, &gpio_init);
  
  gpio_init.GPIO_Pin = GPIO_Pin_0;
  GPIO_Init(GPIOA, &gpio_init);
  
  // Use DMA to automatically copy ADC data register to values_ buffer.
  dma_init.DMA_PeripheralBaseAddr = (uint32_t)&ADC1->DR;
  dma_init.DMA_MemoryBaseAddr = (uint32_t)&values_[0];
  dma_init.DMA_DIR = DMA_DIR_PeripheralSRC;
  dma_init.DMA_BufferSize = 2;
  dma_init.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
  dma_init.DMA_MemoryInc = DMA_MemoryInc_Enable;
  dma_init.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
  dma_init.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
  dma_init.DMA_Mode = DMA_Mode_Circular;
  dma_init.DMA_Priority = DMA_Priority_High;
  dma_init.DMA_M2M = DMA_M2M_Disable;
  DMA_Init(DMA1_Channel1, &dma_init);
  DMA_Cmd(DMA1_Channel1, ENABLE);

  // Init ADC1.
  adc_init.ADC_ScanConvMode = ENABLE;
  adc_init.ADC_ContinuousConvMode = DISABLE;
  adc_init.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
  adc_init.ADC_DataAlign = ADC_DataAlign_Left;
  adc_init.ADC_NbrOfChannel = 2;
  ADC_Init(ADC1, &adc_init);
  
  // Sample rate: 53.6 kHz
  // 72000 / 6 / (12.5 * 2 + 71.5 * 2)
  ADC_RegularChannelConfig(ADC1, ADC_Channel_0, 1, ADC_SampleTime_71Cycles5);
  ADC_RegularChannelConfig(ADC1, ADC_Channel_9, 2, ADC_SampleTime_71Cycles5);
  
  // Enable and calibrate ADC1.
  ADC_Cmd(ADC1, ENABLE);
  ADC_ResetCalibration(ADC1);
  while (ADC_GetResetCalibrationStatus(ADC1));
  ADC_StartCalibration(ADC1);
  while (ADC_GetCalibrationStatus(ADC1));
  ADC_DMACmd(ADC1, ENABLE);

  values_[0] = values_[1] = 32768;
  Convert();
}

void FirmwareUpdateAdc::DeInit() {
  ADC_DMACmd(ADC1, DISABLE);
  ADC_Cmd(ADC1, DISABLE);
  DMA_Cmd(DMA1_Channel1, DISABLE);
}

void FirmwareUpdateAdc::Convert() {
  ADC_SoftwareStartConv(ADC1);
}

}  // namespace plaits