README.md
View this project on CADLAB.io.

OpenSource Hardware of OpenMoteSTM

Hello, here is the source of OpenMoteSTM board, including device library, schematic and PCB. All of those are designed by eagle. We also provide a 3d model for openmotestm using sketchUp!!! You can open the openmotestm.skp file with sketchUp to see what openmotestm looks like. Part of package/device/model came from the library of eagle and sparkfun.

Using OpenMoteSTM with OpenWSN

Hardware & Tools


OpenMoteSTM Motes         Please Contact: tengfei.chang@gmail.com
Micro-B USB Cables        You can buy them online anywhere, or maybe you already have one :)
Jlink Debugger            ]]>https://www.segger.com/jlink-debug-probes.html]]>
Jlink adapter             ]]>https://www.segger.com/jlink-adapters-9pin-cortexm.html]]>


Software Installation


IAR Embedded Workbench for ARM : Version 6.60     ]]>http://www.iar.com]]>
python 2.7:               ]]>http://python.org/download/]]>
PySerial 2.6:             ]]>http://pyserial.sourceforge.net/]]>
PyDispatcher 2.0.3:       ]]>http://pydispatcher.sourceforge.net/]]>
PyWin32:                  ]]>https://sourceforge.net/projects/pywin32/files/pywin32/]]>
SCons:                    ]]>http://scons.org/download.php]]>
Tap for Windows:          ]]>http://openvpn.net/index.php/download/community-downloads.html]]>
Silicon Labs CP2102:      ]]>http://www.silabs.com/support/pages/document-library.aspx?p=Interface&f=...]]>


Installation of Tap


install tun
configure tun


Go: "Start"->"Programs"->Tap For Windows->utilities->"Add a new TAP virtual ethernet adapter"
Open Network Adapter，Looking for "Local Area Connection" adapter which is created by Tap windows
Rename it by "OpenWSN"
Enter following code in a windows command prompt， setting IP：

netsh interface ipv4 add address name=OpenWSN address=10.2.0.1 mask=255.255.0.0
netsh interface ipv6 add address interface=OpenWSN address=bbbb::1/64   

Enable Routing ("IEEE802.3" is the network interface you are using to connect to internet)

netsh interface ipv4 set interface interface=IEEE802.3 forwarding=enabled
netsh interface ipv4 set interface interface=OpenWSN forwarding=enabled

netsh interface ipv6 set interface interface=IEEE802.3 forwarding=enabled
netsh interface ipv6 set interface interface=OpenWSN forwarding=enabled

Add path to routing table

netsh interface ipv6 delete route bbbb::/64 OpenWSN
netsh interface ipv6 add    route bbbb::/64 OpenWSN fe80::8




Source Code


openwsn-sw:               ]]>https://codeload.github.com/openwsn-berkeley/openwsn-sw/zip/REL-1.8.0]]>
openwsn-fw:               ]]>https://codeload.github.com/openwsn-berkeley/openwsn-fw/zip/REL-1.8.0]]>
coap:                     ]]>https://codeload.github.com/openwsn-berkeley/coap/zip/develop]]>


-All extracted folders need to be place at same level-

Downloading led_blink Program


Open "IAR for ARM"
GO: File->Open->Workspace
choosing "openmotestm.eww"


the file is at : openwsn-fw-REL-1.8.0\projects\openmotestm directory

All the projects will shown on the Workspace(left of the GUI)，right click to select "01bsp_leds-Debug" project, then choose "Set as Active" in the prompt menu.
Downloading and Debugging by left clicking the "Green Triangle Button",


tips: "Ctrl + D" is the short-cut of this functions

After downloading，IAR will stop at debugging mode. Press F5 to start the program. You will see the LEDs will blink by sequence


Using OpenWSN Program


Downloading "03oos_openwsn-Debug" program by the procedures above
Connect OpenMoteSTM to PC by USB Cabel，PC will install the Silicon driver for OpenMoteSTM
Open a windows prompt, and enter the following code to start openvisualizer
    cd "Your\openwsn-sw_REL-1.8.0\Directory"\software\openvisualizer\
    scons runweb
Open your favourite brower and type in "localhost:8080" or "127.0.0.1:8080", You will see the openwsn openvisualizer page.
click "toggle" button to set the mote as DAGROOT. If everything goes well, you will find the blue LED light and the green one blinks. To see what's going behind them, please visit: ]]>http://openwsn.org]]>


Contact & Help

If you have any questions, please don't hesitate to contact tengfei.chang@gmail.com