Soaring Technologies

Soaring Technologies / Flight Control Module (Flight-Stack v3.1 Top Layer) Rev B

Top layer board that takes +36V from lower layer and generates various supply voltages for external peripherals: +3.3V, +5V iso, +12V, etc.. Serves as the central communications hub for all flight control operations. This was designed and built by Redara Labs (formerly known as Blackstripe). Document #059-50-008 Revision B

S

Soaring Technologies / Servo Power And Comm Module (Flight-Stack v3.1 Middle Layer) Rev B

Middle layer board that takes +36 from lower layer and generates 6 x 8.1 volt power and connection to 6 x servo motors. This was designed and built by Redara Labs (formerly known as Blackstripe). Document #059-50-007 Revision B

I

Soaring Technologies / Intermediate Bus Converter Module (Flight-Stack v3.1 Bottom Layer) Rev B

Flight-Stack bottom layer board that converts battery power to isolated +36 Vdc. This was designed and built by Redara Labs (formerly known as Blackstripe). Document #059-50-006 Revision B

E

Soaring Technologies / ESC_Distributor_Board_II

Phase II design of ESC Distributor Board. This will be the central communication hub that communicates with the F200 ESC Interface boards on each motor using RS-485.

W

Soaring Technologies / WCS1700_Current_Sensor

This is a small board that provides a connector to the WCS1700 hall-effect current sensor. This allows the current sensor to move freely with the wire that is being monitored for current to the ESC module.

C

Soaring Technologies / Canadian P900 RS-232 to TTL Adapter

Small hand-built assembly that takes in +12V and converts RS-232 to TTL UART.