<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="9.1.3">
<drawing>
<settings>
<setting alwaysvectorfont="no"/>
<setting verticaltext="up"/>
</settings>
<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>
<layers>
<layer number="1" name="Top" color="4" fill="1" visible="no" active="no"/>
<layer number="2" name="Route2" color="1" fill="3" visible="no" active="no"/>
<layer number="3" name="Route3" color="4" fill="3" visible="no" active="no"/>
<layer number="4" name="Route4" color="1" fill="4" visible="no" active="no"/>
<layer number="5" name="Route5" color="4" fill="4" visible="no" active="no"/>
<layer number="6" name="Route6" color="1" fill="8" visible="no" active="no"/>
<layer number="7" name="Route7" color="4" fill="8" visible="no" active="no"/>
<layer number="8" name="Route8" color="1" fill="2" visible="no" active="no"/>
<layer number="9" name="Route9" color="4" fill="2" visible="no" active="no"/>
<layer number="10" name="Route10" color="1" fill="7" visible="no" active="no"/>
<layer number="11" name="Route11" color="4" fill="7" visible="no" active="no"/>
<layer number="12" name="Route12" color="1" fill="5" visible="no" active="no"/>
<layer number="13" name="Route13" color="4" fill="5" visible="no" active="no"/>
<layer number="14" name="Route14" color="1" fill="6" visible="no" active="no"/>
<layer number="15" name="Route15" color="4" fill="6" visible="no" active="no"/>
<layer number="16" name="Bottom" color="1" fill="1" visible="no" active="no"/>
<layer number="17" name="Pads" color="2" fill="1" visible="no" active="no"/>
<layer number="18" name="Vias" color="2" fill="1" visible="no" active="no"/>
<layer number="19" name="Unrouted" color="6" fill="1" visible="no" active="no"/>
<layer number="20" name="Dimension" color="15" fill="1" visible="no" active="no"/>
<layer number="21" name="tPlace" color="7" fill="1" visible="no" active="no"/>
<layer number="22" name="bPlace" color="7" fill="1" visible="no" active="no"/>
<layer number="23" name="tOrigins" color="15" fill="1" visible="no" active="no"/>
<layer number="24" name="bOrigins" color="15" fill="1" visible="no" active="no"/>
<layer number="25" name="tNames" color="7" fill="1" visible="no" active="no"/>
<layer number="26" name="bNames" color="7" fill="1" visible="no" active="no"/>
<layer number="27" name="tValues" color="7" fill="1" visible="no" active="no"/>
<layer number="28" name="bValues" color="7" fill="1" visible="no" active="no"/>
<layer number="29" name="tStop" color="7" fill="3" visible="no" active="no"/>
<layer number="30" name="bStop" color="7" fill="6" visible="no" active="no"/>
<layer number="31" name="tCream" color="7" fill="4" visible="no" active="no"/>
<layer number="32" name="bCream" color="7" fill="5" visible="no" active="no"/>
<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="no"/>
<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="no"/>
<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="no"/>
<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="no"/>
<layer number="37" name="tTest" color="7" fill="1" visible="no" active="no"/>
<layer number="38" name="bTest" color="7" fill="1" visible="no" active="no"/>
<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="no"/>
<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="no"/>
<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="no"/>
<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="no"/>
<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="no"/>
<layer number="44" name="Drills" color="7" fill="1" visible="no" active="no"/>
<layer number="45" name="Holes" color="7" fill="1" visible="no" active="no"/>
<layer number="46" name="Milling" color="3" fill="1" visible="no" active="no"/>
<layer number="47" name="Measures" color="7" fill="1" visible="no" active="no"/>
<layer number="48" name="Document" color="7" fill="1" visible="no" active="no"/>
<layer number="49" name="Reference" color="7" fill="1" visible="no" active="no"/>
<layer number="50" name="dxf" color="7" fill="1" visible="no" active="no"/>
<layer number="51" name="tDocu" color="7" fill="1" visible="no" active="no"/>
<layer number="52" name="bDocu" color="7" fill="1" visible="no" active="no"/>
<layer number="53" name="tGND_GNDA" color="7" fill="9" visible="no" active="no"/>
<layer number="54" name="bGND_GNDA" color="1" fill="9" visible="no" active="no"/>
<layer number="56" name="wert" color="7" fill="1" visible="no" active="no"/>
<layer number="57" name="tCAD" color="7" fill="1" visible="no" active="no"/>
<layer number="59" name="tCarbon" color="7" fill="1" visible="no" active="no"/>
<layer number="60" name="bCarbon" color="7" fill="1" visible="no" active="no"/>
<layer number="88" name="SimResults" color="9" fill="1" visible="yes" active="yes"/>
<layer number="89" name="SimProbes" color="9" fill="1" visible="yes" active="yes"/>
<layer number="90" name="Modules" color="5" fill="1" visible="yes" active="yes"/>
<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>
<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>
<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>
<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>
<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>
<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>
<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>
<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>
<layer number="99" name="SpiceOrder" color="5" fill="1" visible="yes" active="yes"/>
<layer number="100" name="Muster" color="7" fill="1" visible="no" active="no"/>
<layer number="101" name="Hidden" color="15" fill="1" visible="yes" active="yes"/>
<layer number="102" name="Changes" color="12" fill="1" visible="yes" active="yes"/>
<layer number="103" name="tMap" color="7" fill="1" visible="yes" active="yes"/>
<layer number="104" name="Name" color="16" fill="1" visible="yes" active="yes"/>
<layer number="105" name="tPlate" color="7" fill="1" visible="yes" active="yes"/>
<layer number="106" name="bPlate" color="7" fill="1" visible="yes" active="yes"/>
<layer number="107" name="Crop" color="7" fill="1" visible="yes" active="yes"/>
<layer number="108" name="tplace-old" color="10" fill="1" visible="yes" active="yes"/>
<layer number="109" name="ref-old" color="11" fill="1" visible="yes" active="yes"/>
<layer number="110" name="fp0" color="7" fill="1" visible="yes" active="yes"/>
<layer number="111" name="LPC17xx" color="7" fill="1" visible="yes" active="yes"/>
<layer number="112" name="tSilk" color="7" fill="1" visible="yes" active="yes"/>
<layer number="113" name="IDFDebug" color="4" fill="1" visible="yes" active="yes"/>
<layer number="114" name="Badge_Outline" color="7" fill="1" visible="yes" active="yes"/>
<layer number="115" name="ReferenceISLANDS" color="7" fill="1" visible="yes" active="yes"/>
<layer number="116" name="Patch_BOT" color="9" fill="4" visible="yes" active="yes"/>
<layer number="117" name="BACKMAAT1" color="7" fill="1" visible="yes" active="yes"/>
<layer number="118" name="Rect_Pads" color="7" fill="1" visible="yes" active="yes"/>
<layer number="119" name="KAP_TEKEN" color="7" fill="1" visible="yes" active="yes"/>
<layer number="120" name="KAP_MAAT1" color="7" fill="1" visible="yes" active="yes"/>
<layer number="121" name="_tsilk" color="7" fill="1" visible="yes" active="yes"/>
<layer number="122" name="_bsilk" color="7" fill="1" visible="yes" active="yes"/>
<layer number="123" name="tTestmark" color="7" fill="1" visible="yes" active="yes"/>
<layer number="124" name="bTestmark" color="7" fill="1" visible="yes" active="yes"/>
<layer number="125" name="_tNames" color="7" fill="1" visible="yes" active="yes"/>
<layer number="126" name="_bNames" color="7" fill="1" visible="yes" active="yes"/>
<layer number="127" name="_tValues" color="7" fill="1" visible="yes" active="yes"/>
<layer number="128" name="_bValues" color="7" fill="1" visible="yes" active="yes"/>
<layer number="129" name="Mask" color="7" fill="1" visible="yes" active="yes"/>
<layer number="130" name="SMDSTROOK" color="7" fill="1" visible="yes" active="yes"/>
<layer number="131" name="tAdjust" color="7" fill="1" visible="yes" active="yes"/>
<layer number="132" name="bAdjust" color="7" fill="1" visible="yes" active="yes"/>
<layer number="133" name="bottom_silk" color="7" fill="1" visible="yes" active="yes"/>
<layer number="134" name="silk_top" color="7" fill="1" visible="yes" active="yes"/>
<layer number="135" name="silk_bottom" color="7" fill="1" visible="yes" active="yes"/>
<layer number="136" name="silktop" color="7" fill="1" visible="yes" active="yes"/>
<layer number="137" name="silkbottom" color="7" fill="1" visible="yes" active="yes"/>
<layer number="144" name="Drill_legend" color="7" fill="1" visible="yes" active="yes"/>
<layer number="145" name="DrillLegend_01-16" color="7" fill="1" visible="yes" active="yes"/>
<layer number="146" name="DrillLegend_01-20" color="7" fill="1" visible="yes" active="yes"/>
<layer number="150" name="Notes" color="7" fill="1" visible="yes" active="yes"/>
<layer number="151" name="HeatSink" color="7" fill="1" visible="yes" active="yes"/>
<layer number="152" name="_bDocu" color="7" fill="1" visible="yes" active="yes"/>
<layer number="153" name="FabDoc1" color="7" fill="1" visible="yes" active="yes"/>
<layer number="154" name="FabDoc2" color="7" fill="1" visible="yes" active="yes"/>
<layer number="155" name="FabDoc3" color="7" fill="1" visible="yes" active="yes"/>
<layer number="166" name="AntennaArea" color="7" fill="1" visible="yes" active="yes"/>
<layer number="168" name="4mmHeightArea" color="7" fill="1" visible="yes" active="yes"/>
<layer number="199" name="Contour" color="7" fill="1" visible="yes" active="yes"/>
<layer number="200" name="200bmp" color="1" fill="10" visible="yes" active="yes"/>
<layer number="201" name="201bmp" color="2" fill="10" visible="yes" active="yes"/>
<layer number="202" name="202bmp" color="3" fill="10" visible="yes" active="yes"/>
<layer number="203" name="203bmp" color="4" fill="10" visible="yes" active="yes"/>
<layer number="204" name="204bmp" color="5" fill="10" visible="yes" active="yes"/>
<layer number="205" name="205bmp" color="6" fill="10" visible="yes" active="yes"/>
<layer number="206" name="206bmp" color="7" fill="10" visible="yes" active="yes"/>
<layer number="207" name="207bmp" color="8" fill="10" visible="yes" active="yes"/>
<layer number="208" name="208bmp" color="9" fill="10" visible="yes" active="yes"/>
<layer number="209" name="209bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="210" name="210bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="211" name="211bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="212" name="212bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="213" name="213bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="214" name="214bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="215" name="215bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="216" name="216bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="217" name="217bmp" color="18" fill="1" visible="no" active="no"/>
<layer number="218" name="218bmp" color="19" fill="1" visible="no" active="no"/>
<layer number="219" name="219bmp" color="20" fill="1" visible="no" active="no"/>
<layer number="220" name="220bmp" color="21" fill="1" visible="no" active="no"/>
<layer number="221" name="221bmp" color="22" fill="1" visible="no" active="no"/>
<layer number="222" name="222bmp" color="23" fill="1" visible="no" active="no"/>
<layer number="223" name="223bmp" color="24" fill="1" visible="no" active="no"/>
<layer number="224" name="224bmp" color="25" fill="1" visible="no" active="no"/>
<layer number="225" name="225bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="226" name="226bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="227" name="227bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="228" name="228bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="229" name="229bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="230" name="230bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="231" name="231bmp" color="7" fill="1" visible="yes" active="yes"/>
<layer number="232" name="Eagle3D_PG2" color="7" fill="1" visible="yes" active="yes"/>
<layer number="233" name="Eagle3D_PG3" color="7" fill="1" visible="yes" active="yes"/>
<layer number="248" name="Housing" color="7" fill="1" visible="yes" active="yes"/>
<layer number="249" name="Edge" color="7" fill="1" visible="yes" active="yes"/>
<layer number="250" name="Descript" color="3" fill="1" visible="no" active="no"/>
<layer number="251" name="SMDround" color="12" fill="11" visible="no" active="no"/>
<layer number="254" name="cooling" color="7" fill="1" visible="yes" active="yes"/>
<layer number="255" name="routoute" color="7" fill="1" visible="yes" active="yes"/>
</layers>
<schematic xreflabel="%F%N/%S.%C%R" xrefpart="/%S.%C%R">
<libraries>
<library name="diy-modules">
<description>&lt;b&gt;DIY Modules for Arduino, Raspberry Pi, CubieBoard etc.&lt;/b&gt;
&lt;br&gt;&lt;br&gt;
The library contains a list of symbols and footprints for popular, cheap and easy-to-use electronic modules.&lt;br&gt;
The modules are intend to work with microprocessor-based platforms such as &lt;a href="http://arduino.cc"&gt;Arduino&lt;/a&gt;, &lt;a href="http://raspberrypi.org/"&gt;Raspberry Pi&lt;/a&gt;, &lt;a href="http://cubieboard.org/"&gt;CubieBoard&lt;/a&gt;, &lt;a href="http://beagleboard.org/"&gt;BeagleBone&lt;/a&gt; and many others. There are many manufacturers of the modules in the world. Almost all of them can be bought on &lt;a href="ebay.com"&gt;ebay.com&lt;/a&gt;.&lt;br&gt;
&lt;br&gt;
By using this library, you can design a PCB for devices created with usage of modules. Even if you do not need to create PCB design, you can also use the library to quickly document your work by drawing schematics of devices built by you.&lt;br&gt;
&lt;br&gt;
The latest version, examples, photos and much more can be found at: &lt;b&gt;&lt;a href="http://diymodules.org/eagle"&gt;diymodules.org/eagle&lt;/a&gt;&lt;/b&gt;&lt;br&gt;&lt;br&gt;
Comments, suggestions and bug reports please send to: &lt;b&gt;&lt;a href="mailto:eagle@diymodules.org"&gt;eagle@diymodules.org&lt;/b&gt;&lt;/a&gt;&lt;br&gt;&lt;br&gt;
&lt;i&gt;Version: 1.8.0 (2017-Jul-02)&lt;/i&gt;&lt;br&gt;
&lt;i&gt;Created by: Miroslaw Brudnowski&lt;/i&gt;&lt;br&gt;&lt;br&gt;
&lt;i&gt;Released under the Creative Commons Attribution 4.0 International License: &lt;a href="http://creativecommons.org/licenses/by/4.0"&gt;http://creativecommons.org/licenses/by/4.0&lt;/a&gt;&lt;/i&gt;
&lt;br&gt;&lt;br&gt;
&lt;center&gt;
&lt;a href="http://diymodules.org/eagle"&gt;&lt;img src="http://www.diymodules.org/img/diymodules-lbr-image.php?v=1.8.0" alt="DIYmodules.org"&gt;&lt;/a&gt;
&lt;/center&gt;</description>
<packages>
<package name="DISPLAY-OLED-128X32">
<description>&lt;b&gt;128x32 Dot Matrix OLED Module&lt;/b&gt; with &lt;b&gt;I2C&lt;/b&gt; interface</description>
<pad name="1" x="-17.78" y="-3.81" drill="1" shape="square"/>
<pad name="2" x="-17.78" y="-1.27" drill="1"/>
<pad name="3" x="-17.78" y="1.27" drill="1"/>
<pad name="4" x="-17.78" y="3.81" drill="1"/>
<text x="0" y="7.62" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>
<text x="0" y="-7.62" size="1.27" layer="27" align="top-center">&gt;VALUE</text>
<wire x1="-19.05" y1="6.096" x2="19.05" y2="6.096" width="0.127" layer="21"/>
<wire x1="19.05" y1="6.096" x2="19.05" y2="-6.096" width="0.127" layer="21"/>
<wire x1="19.05" y1="-6.096" x2="-19.05" y2="-6.096" width="0.127" layer="21"/>
<wire x1="-19.05" y1="-6.096" x2="-19.05" y2="6.096" width="0.127" layer="21"/>
<wire x1="-13.97" y1="5.715" x2="15.875" y2="5.715" width="0.127" layer="21"/>
<wire x1="15.875" y1="5.715" x2="15.875" y2="-5.715" width="0.127" layer="21"/>
<wire x1="15.875" y1="-5.715" x2="-13.97" y2="-5.715" width="0.127" layer="21"/>
<wire x1="-13.97" y1="-5.715" x2="-13.97" y2="5.715" width="0.127" layer="21"/>
<wire x1="-12.065" y1="3.556" x2="10.414" y2="3.556" width="0.127" layer="21"/>
<wire x1="10.414" y1="3.556" x2="10.414" y2="-2.032" width="0.127" layer="21"/>
<wire x1="10.414" y1="-2.032" x2="-12.065" y2="-2.032" width="0.127" layer="21"/>
<wire x1="-12.065" y1="-2.032" x2="-12.065" y2="3.556" width="0.127" layer="21"/>
<text x="-16.51" y="-3.81" size="0.762" layer="21" align="center-left">GND</text>
<text x="-16.51" y="-1.27" size="0.762" layer="21" align="center-left">VCC</text>
<text x="-16.51" y="1.27" size="0.762" layer="21" align="center-left">SCL</text>
<text x="-16.51" y="3.81" size="0.762" layer="21" align="center-left">SDA</text>
</package>
</packages>
<symbols>
<symbol name="DISPLAY-OLED-128X32">
<description>&lt;b&gt;128x32 Dot Matrix OLED Module&lt;/b&gt; with &lt;b&gt;I2C&lt;/b&gt; interface</description>
<wire x1="-25.4" y1="7.62" x2="25.4" y2="7.62" width="0.254" layer="94"/>
<wire x1="25.4" y1="7.62" x2="25.4" y2="-10.16" width="0.254" layer="94"/>
<wire x1="25.4" y1="-10.16" x2="-25.4" y2="-10.16" width="0.254" layer="94"/>
<wire x1="-25.4" y1="-10.16" x2="-25.4" y2="7.62" width="0.254" layer="94"/>
<pin name="GND" x="-30.48" y="-5.08" length="middle" direction="pwr"/>
<pin name="VCC" x="-30.48" y="-2.54" length="middle" direction="pwr"/>
<pin name="SDA" x="-30.48" y="2.54" length="middle"/>
<pin name="SCL" x="-30.48" y="0" length="middle"/>
<wire x1="-15.24" y1="5.08" x2="15.24" y2="5.08" width="0.254" layer="94"/>
<wire x1="15.24" y1="5.08" x2="15.24" y2="-5.08" width="0.254" layer="94"/>
<wire x1="15.24" y1="-5.08" x2="-15.24" y2="-5.08" width="0.254" layer="94"/>
<wire x1="-15.24" y1="-5.08" x2="-15.24" y2="5.08" width="0.254" layer="94"/>
<rectangle x1="-14.224" y1="2.54" x2="-12.7" y2="4.064" layer="94"/>
<rectangle x1="-11.684" y1="2.54" x2="-10.16" y2="4.064" layer="94"/>
<rectangle x1="-14.224" y1="0" x2="-12.7" y2="1.524" layer="94"/>
<text x="-25.4" y="12.7" size="1.778" layer="95">&gt;NAME</text>
<text x="-25.4" y="10.16" size="1.778" layer="96">&gt;VALUE</text>
<rectangle x1="-9.144" y1="2.54" x2="-7.62" y2="4.064" layer="94"/>
<rectangle x1="-14.224" y1="-2.54" x2="-12.7" y2="-1.016" layer="94"/>
<rectangle x1="-11.684" y1="0" x2="-10.16" y2="1.524" layer="94"/>
<text x="12.7" y="-2.54" size="1.778" layer="94" align="bottom-right">128x32</text>
<text x="12.7" y="0" size="1.778" layer="94" align="bottom-right">OLED</text>
</symbol>
</symbols>
<devicesets>
<deviceset name="DISPLAY-OLED-128X32">
<description>&lt;b&gt;128x32 Dot Matrix OLED Module&lt;/b&gt; with &lt;b&gt;I2C&lt;/b&gt; interface based on &lt;b&gt;SSD1306&lt;/b&gt; chip
&lt;p&gt;More details available here:&lt;br&gt;
&lt;a href="http://www.tinyosshop.com/index.php?route=product/product&amp;product_id=953"&gt;http://www.tinyosshop.com/index.php?route=product/product&amp;product_id=953&lt;/a&gt;&lt;/p&gt;
&lt;p&gt;Schematic available here:&lt;br&gt;
&lt;a href="http://www.tinyosshop.com/datasheet/OLED%2012832.pdf"&gt;http://www.tinyosshop.com/datasheet/OLED%2012832.pdf&lt;/a&gt;&lt;/p&gt;
&lt;p&gt;&lt;b&gt;SSD1306&lt;/b&gt; datasheet:&lt;br&gt;
&lt;a href="https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf"&gt;https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf&lt;/a&gt;&lt;/p&gt;
&lt;p&gt;&lt;b&gt;&lt;a href="http://www.ebay.com/sch/oled+display+128x32+i2c"&gt;Click here to find device on ebay.com&lt;/a&gt;&lt;/b&gt;&lt;/p&gt;

&lt;p&gt;&lt;img alt="photo" src="http://www.diymodules.org/img/device-photo.php?name=DISPLAY-OLED-128X32"&gt;&lt;/p&gt;</description>
<gates>
<gate name="G$1" symbol="DISPLAY-OLED-128X32" x="0" y="0"/>
</gates>
<devices>
<device name="" package="DISPLAY-OLED-128X32">
<connects>
<connect gate="G$1" pin="GND" pad="1"/>
<connect gate="G$1" pin="SCL" pad="3"/>
<connect gate="G$1" pin="SDA" pad="4"/>
<connect gate="G$1" pin="VCC" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
</devicesets>
</library>
<library name="esp8266modules">
<packages>
<package name="ESP12">
<description>ESP8266 Module 12</description>
<wire x1="7.9" y1="14.2" x2="7.9" y2="8.4" width="0.127" layer="21"/>
<wire x1="7.9" y1="-9.8" x2="-8.1" y2="-9.8" width="0.127" layer="21"/>
<wire x1="-8.1" y1="8.4" x2="-8.1" y2="14.2" width="0.127" layer="21"/>
<wire x1="-8.1" y1="14.2" x2="7.9" y2="14.2" width="0.127" layer="21"/>
<wire x1="-8.1" y1="8.4" x2="7.9" y2="8.4" width="0.127" layer="21"/>
<pad name="GND" x="6.9" y="-8.2" drill="0.7" shape="offset"/>
<pad name="GPIO15" x="6.9" y="-6.2" drill="0.7" shape="offset"/>
<pad name="GPIO2" x="6.9" y="-4.2" drill="0.7" shape="offset"/>
<pad name="GPIO0" x="6.9" y="-2.2" drill="0.7" shape="offset"/>
<pad name="GPIO5" x="6.9" y="-0.2" drill="0.7" shape="offset"/>
<pad name="GPIO4" x="6.9" y="1.8" drill="0.7" shape="offset"/>
<pad name="RX" x="6.9" y="3.8" drill="0.7" shape="offset"/>
<pad name="TX" x="6.9" y="5.8" drill="0.7" shape="offset"/>
<pad name="VCC" x="-7.1" y="-8.2" drill="0.7" shape="offset" rot="R180"/>
<pad name="GPIO13" x="-7.1" y="-6.2" drill="0.7" shape="offset" rot="R180"/>
<pad name="GPIO12" x="-7.1" y="-4.2" drill="0.7" shape="offset" rot="R180"/>
<pad name="GPIO14" x="-7.1" y="-2.2" drill="0.7" shape="offset" rot="R180"/>
<pad name="GPIO16" x="-7.1" y="-0.2" drill="0.7" shape="offset" rot="R180"/>
<pad name="CH_PD" x="-7.1" y="1.8" drill="0.7" shape="offset" rot="R180"/>
<pad name="ADC" x="-7.1" y="3.8" drill="0.7" shape="offset" rot="R180"/>
<pad name="RESET" x="-7.1" y="5.8" drill="0.7" shape="offset" rot="R180"/>
<wire x1="-4.9" y1="8.6" x2="-4.9" y2="13.5" width="0.6096" layer="21"/>
<wire x1="-4.9" y1="13.5" x2="-4" y2="13.5" width="0.6096" layer="21"/>
<wire x1="-4" y1="13.5" x2="-4" y2="9.8" width="0.6096" layer="21"/>
<wire x1="-4" y1="9.8" x2="-3" y2="9.8" width="0.6096" layer="21"/>
<wire x1="-3" y1="9.8" x2="-3" y2="13.4" width="0.6096" layer="21"/>
<wire x1="-3" y1="13.4" x2="-1.8" y2="13.4" width="0.6096" layer="21"/>
<wire x1="-1.8" y1="13.4" x2="-1.8" y2="9.8" width="0.6096" layer="21"/>
<wire x1="-1.8" y1="9.8" x2="-0.6" y2="9.8" width="0.6096" layer="21"/>
<wire x1="-0.6" y1="9.8" x2="-0.6" y2="13.4" width="0.6096" layer="21"/>
<wire x1="-0.6" y1="13.4" x2="0.5" y2="13.4" width="0.6096" layer="21"/>
<wire x1="0.5" y1="13.4" x2="0.5" y2="9.9" width="0.6096" layer="21"/>
<wire x1="0.5" y1="9.9" x2="1.6" y2="9.9" width="0.6096" layer="21"/>
<wire x1="1.6" y1="9.9" x2="1.6" y2="13.4" width="0.6096" layer="21"/>
<wire x1="1.6" y1="13.4" x2="5.6" y2="13.4" width="0.6096" layer="21"/>
<wire x1="-4.9" y1="8.5" x2="-4.9" y2="7.9" width="0.6096" layer="21"/>
<wire x1="-4.9" y1="7.9" x2="1.6" y2="7.9" width="0.6096" layer="21"/>
<text x="-4" y="2.6" size="1.4224" layer="21">ESP - 12</text>
<text x="-7.7" y="-11.9" size="1.4224" layer="27">&gt;Value</text>
<text x="-7.7" y="15.1" size="1.4224" layer="25">&gt;Name</text>
<wire x1="-8.1026" y1="8.4074" x2="-8.1026" y2="6.5786" width="0.127" layer="21"/>
<wire x1="-8.1026" y1="5.0292" x2="-8.1026" y2="4.572" width="0.127" layer="21"/>
<wire x1="-8.1026" y1="3.0226" x2="-8.1026" y2="2.5654" width="0.127" layer="21"/>
<wire x1="-8.1026" y1="1.016" x2="-8.1026" y2="0.5842" width="0.127" layer="21"/>
<wire x1="-8.1026" y1="-0.9652" x2="-8.1026" y2="-1.4224" width="0.127" layer="21"/>
<wire x1="-8.1026" y1="-2.9718" x2="-8.1026" y2="-3.429" width="0.127" layer="21"/>
<wire x1="-8.1026" y1="-4.9784" x2="-8.1026" y2="-5.4356" width="0.127" layer="21"/>
<wire x1="-8.1026" y1="-6.985" x2="-8.1026" y2="-7.4168" width="0.127" layer="21"/>
<wire x1="-8.1026" y1="-8.9662" x2="-8.1026" y2="-9.8044" width="0.127" layer="21"/>
<wire x1="7.8994" y1="-9.779" x2="7.8994" y2="-8.9916" width="0.127" layer="21"/>
<wire x1="7.8994" y1="-6.9596" x2="7.8994" y2="-7.4422" width="0.127" layer="21"/>
<wire x1="7.8994" y1="-4.9276" x2="7.8994" y2="-5.461" width="0.127" layer="21"/>
<wire x1="7.8994" y1="-2.921" x2="7.8994" y2="-3.4544" width="0.127" layer="21"/>
<wire x1="7.8994" y1="-0.9398" x2="7.8994" y2="-1.4478" width="0.127" layer="21"/>
<wire x1="7.8994" y1="1.0414" x2="7.8994" y2="0.5588" width="0.127" layer="21"/>
<wire x1="7.9248" y1="3.048" x2="7.9248" y2="2.54" width="0.127" layer="21"/>
<wire x1="7.9248" y1="5.0546" x2="7.9248" y2="4.572" width="0.127" layer="21"/>
<wire x1="7.874" y1="8.4074" x2="7.8994" y2="8.4074" width="0.127" layer="21"/>
<wire x1="7.8994" y1="8.4074" x2="7.8994" y2="6.5532" width="0.127" layer="21"/>
</package>
<package name="ESP12-SMD">
<description>ESP8266 Module 12 SMD pads</description>
<wire x1="7.9" y1="14.2" x2="7.9" y2="6.9" width="0.127" layer="21"/>
<wire x1="7.9" y1="-9.8" x2="-8.1" y2="-9.8" width="0.127" layer="21"/>
<wire x1="-8.1" y1="6.9" x2="-8.1" y2="14.2" width="0.127" layer="21"/>
<wire x1="-8.1" y1="14.2" x2="7.9" y2="14.2" width="0.127" layer="21"/>
<wire x1="-4.9" y1="8.6" x2="-4.9" y2="13.5" width="0.6096" layer="21"/>
<wire x1="-4.9" y1="13.5" x2="-4" y2="13.5" width="0.6096" layer="21"/>
<wire x1="-4" y1="13.5" x2="-4" y2="9.8" width="0.6096" layer="21"/>
<wire x1="-4" y1="9.8" x2="-3" y2="9.8" width="0.6096" layer="21"/>
<wire x1="-3" y1="9.8" x2="-3" y2="13.4" width="0.6096" layer="21"/>
<wire x1="-3" y1="13.4" x2="-1.8" y2="13.4" width="0.6096" layer="21"/>
<wire x1="-1.8" y1="13.4" x2="-1.8" y2="9.8" width="0.6096" layer="21"/>
<wire x1="-1.8" y1="9.8" x2="-0.6" y2="9.8" width="0.6096" layer="21"/>
<wire x1="-0.6" y1="9.8" x2="-0.6" y2="13.4" width="0.6096" layer="21"/>
<wire x1="-0.6" y1="13.4" x2="0.5" y2="13.4" width="0.6096" layer="21"/>
<wire x1="0.5" y1="13.4" x2="0.5" y2="9.9" width="0.6096" layer="21"/>
<wire x1="0.5" y1="9.9" x2="1.6" y2="9.9" width="0.6096" layer="21"/>
<wire x1="1.6" y1="9.9" x2="1.6" y2="13.4" width="0.6096" layer="21"/>
<wire x1="1.6" y1="13.4" x2="5.6" y2="13.4" width="0.6096" layer="21"/>
<wire x1="-4.9" y1="8.5" x2="-4.9" y2="7.9" width="0.6096" layer="21"/>
<wire x1="-4.9" y1="7.9" x2="1.6" y2="7.9" width="0.6096" layer="21"/>
<text x="0" y="3" size="1.4224" layer="21" align="bottom-center">ESP - 12</text>
<text x="-7.7" y="-11.9" size="1.4224" layer="27">&gt;Value</text>
<text x="-7.7" y="15.1" size="1.4224" layer="25">&gt;Name</text>
<smd name="RESET" x="-8.3" y="5.8" dx="3" dy="1.2" layer="1"/>
<smd name="ADC" x="-8.3" y="3.8" dx="3" dy="1.2" layer="1"/>
<smd name="CH_PD" x="-8.3" y="1.8" dx="3" dy="1.2" layer="1"/>
<smd name="GPIO16" x="-8.3" y="-0.2" dx="3" dy="1.2" layer="1"/>
<smd name="GPIO14" x="-8.3" y="-2.2" dx="3" dy="1.2" layer="1"/>
<smd name="GPIO12" x="-8.3" y="-4.2" dx="3" dy="1.2" layer="1"/>
<smd name="GPIO13" x="-8.3" y="-6.2" dx="3" dy="1.2" layer="1"/>
<smd name="VCC" x="-8.3" y="-8.2" dx="3" dy="1.2" layer="1"/>
<smd name="TXD0" x="8.1" y="5.8" dx="3" dy="1.2" layer="1"/>
<smd name="RXD0" x="8.1" y="3.8" dx="3" dy="1.2" layer="1"/>
<smd name="GPIO4" x="8.1" y="1.8" dx="3" dy="1.2" layer="1"/>
<smd name="GPIO5" x="8.1" y="-0.2" dx="3" dy="1.2" layer="1"/>
<smd name="GPIO0" x="8.1" y="-2.2" dx="3" dy="1.2" layer="1"/>
<smd name="GPIO2" x="8.1" y="-4.2" dx="3" dy="1.2" layer="1"/>
<smd name="GPIO15" x="8.1" y="-6.2" dx="3" dy="1.2" layer="1"/>
<smd name="GND" x="8.1" y="-8.2" dx="3" dy="1.2" layer="1"/>
</package>
</packages>
<symbols>
<symbol name="ESP12">
<wire x1="-12.7" y1="10.16" x2="-12.7" y2="-12.7" width="0.254" layer="94"/>
<wire x1="-12.7" y1="-12.7" x2="10.16" y2="-12.7" width="0.254" layer="94"/>
<wire x1="10.16" y1="-12.7" x2="10.16" y2="10.16" width="0.254" layer="94"/>
<wire x1="10.16" y1="10.16" x2="-12.7" y2="10.16" width="0.254" layer="94"/>
<pin name="RESET" x="-17.78" y="7.62" visible="pin" length="middle"/>
<pin name="ADC" x="-17.78" y="5.08" visible="pin" length="middle"/>
<pin name="CH_PD" x="-17.78" y="2.54" visible="pin" length="middle"/>
<pin name="GPIO16" x="-17.78" y="0" visible="pin" length="middle"/>
<pin name="GPIO14" x="-17.78" y="-2.54" visible="pin" length="middle"/>
<pin name="GPIO12" x="-17.78" y="-5.08" visible="pin" length="middle"/>
<pin name="GPIO13" x="-17.78" y="-7.62" visible="pin" length="middle"/>
<pin name="VCC" x="-17.78" y="-10.16" visible="pin" length="middle"/>
<pin name="GND" x="15.24" y="-10.16" visible="pin" length="middle" rot="R180"/>
<pin name="GPIO15" x="15.24" y="-7.62" visible="pin" length="middle" rot="R180"/>
<pin name="GPIO2" x="15.24" y="-5.08" visible="pin" length="middle" rot="R180"/>
<pin name="GPIO0" x="15.24" y="-2.54" visible="pin" length="middle" rot="R180"/>
<pin name="GPIO5" x="15.24" y="0" visible="pin" length="middle" rot="R180"/>
<pin name="GPIO4" x="15.24" y="2.54" visible="pin" length="middle" rot="R180"/>
<pin name="RX" x="15.24" y="5.08" visible="pin" length="middle" rot="R180"/>
<pin name="TX" x="15.24" y="7.62" visible="pin" length="middle" rot="R180"/>
<text x="-12.7" y="10.16" size="1.778" layer="95">&gt;Name</text>
<text x="-12.7" y="-15.24" size="1.778" layer="96">&gt;Value</text>
</symbol>
</symbols>
<devicesets>
<deviceset name="ESP12" prefix="U" uservalue="yes">
<description>ESP8266 Wifi module 12</description>
<gates>
<gate name="G$1" symbol="ESP12" x="0" y="-5.08"/>
</gates>
<devices>
<device name="" package="ESP12">
<connects>
<connect gate="G$1" pin="ADC" pad="ADC"/>
<connect gate="G$1" pin="CH_PD" pad="CH_PD"/>
<connect gate="G$1" pin="GND" pad="GND"/>
<connect gate="G$1" pin="GPIO0" pad="GPIO0"/>
<connect gate="G$1" pin="GPIO12" pad="GPIO12"/>
<connect gate="G$1" pin="GPIO13" pad="GPIO13"/>
<connect gate="G$1" pin="GPIO14" pad="GPIO14"/>
<connect gate="G$1" pin="GPIO15" pad="GPIO15"/>
<connect gate="G$1" pin="GPIO16" pad="GPIO16"/>
<connect gate="G$1" pin="GPIO2" pad="GPIO2"/>
<connect gate="G$1" pin="GPIO4" pad="GPIO4"/>
<connect gate="G$1" pin="GPIO5" pad="GPIO5"/>
<connect gate="G$1" pin="RESET" pad="RESET"/>
<connect gate="G$1" pin="RX" pad="RX"/>
<connect gate="G$1" pin="TX" pad="TX"/>
<connect gate="G$1" pin="VCC" pad="VCC"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="SMD" package="ESP12-SMD">
<connects>
<connect gate="G$1" pin="ADC" pad="ADC"/>
<connect gate="G$1" pin="CH_PD" pad="CH_PD"/>
<connect gate="G$1" pin="GND" pad="GND"/>
<connect gate="G$1" pin="GPIO0" pad="GPIO0"/>
<connect gate="G$1" pin="GPIO12" pad="GPIO12"/>
<connect gate="G$1" pin="GPIO13" pad="GPIO13"/>
<connect gate="G$1" pin="GPIO14" pad="GPIO14"/>
<connect gate="G$1" pin="GPIO15" pad="GPIO15"/>
<connect gate="G$1" pin="GPIO16" pad="GPIO16"/>
<connect gate="G$1" pin="GPIO2" pad="GPIO2"/>
<connect gate="G$1" pin="GPIO4" pad="GPIO4"/>
<connect gate="G$1" pin="GPIO5" pad="GPIO5"/>
<connect gate="G$1" pin="RESET" pad="RESET"/>
<connect gate="G$1" pin="RX" pad="RXD0"/>
<connect gate="G$1" pin="TX" pad="TXD0"/>
<connect gate="G$1" pin="VCC" pad="VCC"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
</devicesets>
</library>
<library name="audio amplifier example" urn="urn:adsk.eagle:library:970892">
<description>
</description>
<packages>
</packages>
<symbols>
<symbol name="VCC" urn="urn:adsk.eagle:symbol:970894/1" library_version="4">
<wire x1="-1.27" y1="-1.27" x2="0" y2="0" width="0.254" layer="94"/>
<wire x1="0" y1="0" x2="1.27" y2="-1.27" width="0.254" layer="94"/>
<pin name="VCC" x="0" y="-2.54" visible="off" length="short" direction="sup" rot="R90"/>
<text x="-1.524" y="1.016" size="1.27" layer="96">&gt;VALUE</text>
</symbol>
</symbols>
<devicesets>
<deviceset name="VCC" urn="urn:adsk.eagle:component:970923/1" prefix="P+" library_version="4">
<description>&lt;b&gt;VCC SUPPLY SYMBOL&lt;/b&gt;</description>
<gates>
<gate name="VCC" symbol="VCC" x="0" y="0"/>
</gates>
<devices>
<device name="">
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
</devicesets>
</library>
<library name="supply1" urn="urn:adsk.eagle:library:371">
<description>&lt;b&gt;Supply Symbols&lt;/b&gt;&lt;p&gt;
 GND, VCC, 0V, +5V, -5V, etc.&lt;p&gt;
 Please keep in mind, that these devices are necessary for the
 automatic wiring of the supply signals.&lt;p&gt;
 The pin name defined in the symbol is identical to the net which is to be wired automatically.&lt;p&gt;
 In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.&lt;p&gt;
 &lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>
<packages>
</packages>
<symbols>
<symbol name="GND" urn="urn:adsk.eagle:symbol:26925/1" library_version="1">
<wire x1="-1.905" y1="0" x2="1.905" y2="0" width="0.254" layer="94"/>
<text x="-2.54" y="-2.54" size="1.778" layer="96">&gt;VALUE</text>
<pin name="GND" x="0" y="2.54" visible="off" length="short" direction="sup" rot="R270"/>
</symbol>
</symbols>
<devicesets>
<deviceset name="GND" urn="urn:adsk.eagle:component:26954/1" prefix="GND" library_version="1">
<description>&lt;b&gt;SUPPLY SYMBOL&lt;/b&gt;</description>
<gates>
<gate name="1" symbol="GND" x="0" y="0"/>
</gates>
<devices>
<device name="">
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
</devicesets>
</library>
<library name="resistor" urn="urn:adsk.eagle:library:348">
<description>&lt;b&gt;Resistors, Capacitors, Inductors&lt;/b&gt;&lt;p&gt;
Based on the previous libraries:
&lt;ul&gt;
&lt;li&gt;r.lbr
&lt;li&gt;cap.lbr 
&lt;li&gt;cap-fe.lbr
&lt;li&gt;captant.lbr
&lt;li&gt;polcap.lbr
&lt;li&gt;ipc-smd.lbr
&lt;/ul&gt;
All SMD packages are defined according to the IPC specifications and  CECC&lt;p&gt;
&lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;&lt;p&gt;
&lt;p&gt;
for Electrolyt Capacitors see also :&lt;p&gt;
www.bccomponents.com &lt;p&gt;
www.panasonic.com&lt;p&gt;
www.kemet.com&lt;p&gt;
&lt;p&gt;
for trimmer refence see : &lt;u&gt;www.electrospec-inc.com/cross_references/trimpotcrossref.asp&lt;/u&gt;&lt;p&gt;

&lt;map name="nav_main"&gt;
&lt;area shape="rect" coords="0,1,140,23" href="../military_specs.asp" title=""&gt;
&lt;area shape="rect" coords="0,24,140,51" href="../about.asp" title=""&gt;
&lt;area shape="rect" coords="1,52,140,77" href="../rfq.asp" title=""&gt;
&lt;area shape="rect" coords="0,78,139,103" href="../products.asp" title=""&gt;
&lt;area shape="rect" coords="1,102,138,128" href="../excess_inventory.asp" title=""&gt;
&lt;area shape="rect" coords="1,129,138,150" href="../edge.asp" title=""&gt;
&lt;area shape="rect" coords="1,151,139,178" href="../industry_links.asp" title=""&gt;
&lt;area shape="rect" coords="0,179,139,201" href="../comments.asp" title=""&gt;
&lt;area shape="rect" coords="1,203,138,231" href="../directory.asp" title=""&gt;
&lt;area shape="default" nohref&gt;
&lt;/map&gt;

&lt;html&gt;

&lt;title&gt;&lt;/title&gt;

 &lt;LINK REL="StyleSheet" TYPE="text/css" HREF="style-sheet.css"&gt;

&lt;body bgcolor="#ffffff" text="#000000" marginwidth="0" marginheight="0" topmargin="0" leftmargin="0"&gt;
&lt;table border=0 cellspacing=0 cellpadding=0 width="100%" cellpaddding=0 height="55%"&gt;
&lt;tr valign="top"&gt;

&lt;/td&gt;
&lt;! &lt;td width="10"&gt;&amp;nbsp;&lt;/td&gt;
&lt;td width="90%"&gt;

&lt;b&gt;&lt;font color="#0000FF" size="4"&gt;TRIM-POT CROSS REFERENCE&lt;/font&gt;&lt;/b&gt;
&lt;P&gt;
&lt;TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2&gt;
  &lt;TR&gt;
    &lt;TD COLSPAN=8&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;RECTANGULAR MULTI-TURN&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
  &lt;/TR&gt;
  &lt;TR&gt;
    &lt;TD ALIGN=CENTER&gt;
      &lt;B&gt;
      &lt;FONT SIZE=3 FACE=ARIAL color="#FF0000"&gt;BOURNS&lt;/FONT&gt;
      &lt;/B&gt;
    &lt;/TD&gt;
    &lt;TD ALIGN=CENTER&gt;
      &lt;B&gt;
      &lt;FONT SIZE=3 FACE=ARIAL color="#FF0000"&gt;BI&amp;nbsp;TECH&lt;/FONT&gt;
      &lt;/B&gt;
    &lt;/TD&gt;
    &lt;TD ALIGN=CENTER&gt;
      &lt;B&gt;
      &lt;FONT SIZE=3 FACE=ARIAL color="#FF0000"&gt;DALE-VISHAY&lt;/FONT&gt;
      &lt;/B&gt;
    &lt;/TD&gt;
    &lt;TD ALIGN=CENTER&gt;
      &lt;B&gt;
      &lt;FONT SIZE=3 FACE=ARIAL color="#FF0000"&gt;PHILIPS/MEPCO&lt;/FONT&gt;
      &lt;/B&gt;
    &lt;/TD&gt;
    &lt;TD ALIGN=CENTER&gt;
      &lt;B&gt;
      &lt;FONT SIZE=3 FACE=ARIAL color="#FF0000"&gt;MURATA&lt;/FONT&gt;
      &lt;/B&gt;
    &lt;/TD&gt;
    &lt;TD ALIGN=CENTER&gt;
      &lt;B&gt;
      &lt;FONT SIZE=3 FACE=ARIAL color="#FF0000"&gt;PANASONIC&lt;/FONT&gt;
      &lt;/B&gt;
    &lt;/TD&gt;
    &lt;TD ALIGN=CENTER&gt;
      &lt;B&gt;
      &lt;FONT SIZE=3 FACE=ARIAL color="#FF0000"&gt;SPECTROL&lt;/FONT&gt;
      &lt;/B&gt;
    &lt;/TD&gt;
    &lt;TD ALIGN=CENTER&gt;
      &lt;B&gt;
      &lt;FONT SIZE=3 FACE=ARIAL color="#FF0000"&gt;MILSPEC&lt;/FONT&gt;
      &lt;/B&gt;
    &lt;/TD&gt;&lt;TD&gt;&amp;nbsp;&lt;/TD&gt;
  &lt;/TR&gt;
  &lt;TR&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3 &gt;
      3005P&lt;BR&gt;
      3006P&lt;BR&gt;
      3006W&lt;BR&gt;
      3006Y&lt;BR&gt;
      3009P&lt;BR&gt;
      3009W&lt;BR&gt;
      3009Y&lt;BR&gt;
      3057J&lt;BR&gt;
      3057L&lt;BR&gt;
      3057P&lt;BR&gt;
      3057Y&lt;BR&gt;
      3059J&lt;BR&gt;
      3059L&lt;BR&gt;
      3059P&lt;BR&gt;
      3059Y&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      -&lt;BR&gt;
      89P&lt;BR&gt;
      89W&lt;BR&gt;
      89X&lt;BR&gt;
      89PH&lt;BR&gt;
      76P&lt;BR&gt;
      89XH&lt;BR&gt;
      78SLT&lt;BR&gt;
      78L&amp;nbsp;ALT&lt;BR&gt;
      56P&amp;nbsp;ALT&lt;BR&gt;
      78P&amp;nbsp;ALT&lt;BR&gt;
      T8S&lt;BR&gt;
      78L&lt;BR&gt;
      56P&lt;BR&gt;
      78P&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      -&lt;BR&gt;
      T18/784&lt;BR&gt;
      783&lt;BR&gt;
      781&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      2199&lt;BR&gt;
      1697/1897&lt;BR&gt;
      1680/1880&lt;BR&gt;
      2187&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      -&lt;BR&gt;
      8035EKP/CT20/RJ-20P&lt;BR&gt;
      -&lt;BR&gt;
      RJ-20X&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      1211L&lt;BR&gt;
      8012EKQ&amp;nbsp;ALT&lt;BR&gt;
      8012EKR&amp;nbsp;ALT&lt;BR&gt;
      1211P&lt;BR&gt;
      8012EKJ&lt;BR&gt;
      8012EKL&lt;BR&gt;
      8012EKQ&lt;BR&gt;
      8012EKR&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      -&lt;BR&gt;
      2101P&lt;BR&gt;
      2101W&lt;BR&gt;
      2101Y&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      2102L&lt;BR&gt;
      2102S&lt;BR&gt;
      2102Y&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      -&lt;BR&gt;
      EVMCOG&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      -&lt;BR&gt;
      43P&lt;BR&gt;
      43W&lt;BR&gt;
      43Y&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      40L&lt;BR&gt;
      40P&lt;BR&gt;
      40Y&lt;BR&gt;
      70Y-T602&lt;BR&gt;
      70L&lt;BR&gt;
      70P&lt;BR&gt;
      70Y&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      RT/RTR12&lt;BR&gt;
      RT/RTR12&lt;BR&gt;
      RT/RTR12&lt;BR&gt;
      -&lt;BR&gt;
      RJ/RJR12&lt;BR&gt;
      RJ/RJR12&lt;BR&gt;
      RJ/RJR12&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
  &lt;/TR&gt;
  &lt;TR&gt;
    &lt;TD COLSPAN=8&gt;&amp;nbsp;
    &lt;/TD&gt;
  &lt;/TR&gt;
  &lt;TR&gt;
    &lt;TD COLSPAN=8&gt;
      &lt;FONT SIZE=4 FACE=ARIAL&gt;&lt;B&gt;SQUARE MULTI-TURN&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
  &lt;/TR&gt;
  &lt;TR&gt;
   &lt;TD ALIGN=CENTER&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;BOURN&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD ALIGN=CENTER&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;BI&amp;nbsp;TECH&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD ALIGN=CENTER&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;DALE-VISHAY&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD ALIGN=CENTER&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;PHILIPS/MEPCO&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD ALIGN=CENTER&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;MURATA&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD ALIGN=CENTER&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;PANASONIC&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD ALIGN=CENTER&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;SPECTROL&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD ALIGN=CENTER&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;MILSPEC&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
  &lt;/TR&gt;
  &lt;TR&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      3250L&lt;BR&gt;
      3250P&lt;BR&gt;
      3250W&lt;BR&gt;
      3250X&lt;BR&gt;
      3252P&lt;BR&gt;
      3252W&lt;BR&gt;
      3252X&lt;BR&gt;
      3260P&lt;BR&gt;
      3260W&lt;BR&gt;
      3260X&lt;BR&gt;
      3262P&lt;BR&gt;
      3262W&lt;BR&gt;
      3262X&lt;BR&gt;
      3266P&lt;BR&gt;
      3266W&lt;BR&gt;
      3266X&lt;BR&gt;
      3290H&lt;BR&gt;
      3290P&lt;BR&gt;
      3290W&lt;BR&gt;
      3292P&lt;BR&gt;
      3292W&lt;BR&gt;
      3292X&lt;BR&gt;
      3296P&lt;BR&gt;
      3296W&lt;BR&gt;
      3296X&lt;BR&gt;
      3296Y&lt;BR&gt;
      3296Z&lt;BR&gt;
      3299P&lt;BR&gt;
      3299W&lt;BR&gt;
      3299X&lt;BR&gt;
      3299Y&lt;BR&gt;
      3299Z&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      -&lt;BR&gt;
      66P&amp;nbsp;ALT&lt;BR&gt;
      66W&amp;nbsp;ALT&lt;BR&gt;
      66X&amp;nbsp;ALT&lt;BR&gt;
      66P&amp;nbsp;ALT&lt;BR&gt;
      66W&amp;nbsp;ALT&lt;BR&gt;
      66X&amp;nbsp;ALT&lt;BR&gt;
      -&lt;BR&gt;
      64W&amp;nbsp;ALT&lt;BR&gt;
      -&lt;BR&gt;
      64P&amp;nbsp;ALT&lt;BR&gt;
      64W&amp;nbsp;ALT&lt;BR&gt;
      64X&amp;nbsp;ALT&lt;BR&gt;
      64P&lt;BR&gt;
      64W&lt;BR&gt;
      64X&lt;BR&gt;
      66X&amp;nbsp;ALT&lt;BR&gt;
      66P&amp;nbsp;ALT&lt;BR&gt;
      66W&amp;nbsp;ALT&lt;BR&gt;
      66P&lt;BR&gt;
      66W&lt;BR&gt;
      66X&lt;BR&gt;
      67P&lt;BR&gt;
      67W&lt;BR&gt;
      67X&lt;BR&gt;
      67Y&lt;BR&gt;
      67Z&lt;BR&gt;
      68P&lt;BR&gt;
      68W&lt;BR&gt;
      68X&lt;BR&gt;
      67Y&amp;nbsp;ALT&lt;BR&gt;
      67Z&amp;nbsp;ALT&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      5050&lt;BR&gt;
      5091&lt;BR&gt;
      5080&lt;BR&gt;
      5087&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      T63YB&lt;BR&gt;
      T63XB&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      5887&lt;BR&gt;
      5891&lt;BR&gt;
      5880&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      T93Z&lt;BR&gt;
      T93YA&lt;BR&gt;
      T93XA&lt;BR&gt;
      T93YB&lt;BR&gt;
      T93XB&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      8026EKP&lt;BR&gt;
      8026EKW&lt;BR&gt;
      8026EKM&lt;BR&gt;
      8026EKP&lt;BR&gt;
      8026EKB&lt;BR&gt;
      8026EKM&lt;BR&gt;
      1309X&lt;BR&gt;
      1309P&lt;BR&gt;
      1309W&lt;BR&gt;
      8024EKP&lt;BR&gt;
      8024EKW&lt;BR&gt;
      8024EKN&lt;BR&gt;
      RJ-9P/CT9P&lt;BR&gt;
      RJ-9W&lt;BR&gt;
      RJ-9X&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      3103P&lt;BR&gt;
      3103Y&lt;BR&gt;
      3103Z&lt;BR&gt;
      3103P&lt;BR&gt;
      3103Y&lt;BR&gt;
      3103Z&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      3105P/3106P&lt;BR&gt;
      3105W/3106W&lt;BR&gt;
      3105X/3106X&lt;BR&gt;
      3105Y/3106Y&lt;BR&gt;
      3105Z/3105Z&lt;BR&gt;
      3102P&lt;BR&gt;
      3102W&lt;BR&gt;
      3102X&lt;BR&gt;
      3102Y&lt;BR&gt;
      3102Z&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      EVMCBG&lt;BR&gt;
      EVMCCG&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      55-1-X&lt;BR&gt;
      55-4-X&lt;BR&gt;
      55-3-X&lt;BR&gt;
      55-2-X&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      50-2-X&lt;BR&gt;
      50-4-X&lt;BR&gt;
      50-3-X&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      64P&lt;BR&gt;
      64W&lt;BR&gt;
      64X&lt;BR&gt;
      64Y&lt;BR&gt;
      64Z&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      RT/RTR22&lt;BR&gt;
      RT/RTR22&lt;BR&gt;
      RT/RTR22&lt;BR&gt;
      RT/RTR22&lt;BR&gt;
      RJ/RJR22&lt;BR&gt;
      RJ/RJR22&lt;BR&gt;
      RJ/RJR22&lt;BR&gt;
      RT/RTR26&lt;BR&gt;
      RT/RTR26&lt;BR&gt;
      RT/RTR26&lt;BR&gt;
      RJ/RJR26&lt;BR&gt;
      RJ/RJR26&lt;BR&gt;
      RJ/RJR26&lt;BR&gt;
      RJ/RJR26&lt;BR&gt;
      RJ/RJR26&lt;BR&gt;
      RJ/RJR26&lt;BR&gt;
      RT/RTR24&lt;BR&gt;
      RT/RTR24&lt;BR&gt;
      RT/RTR24&lt;BR&gt;
      RJ/RJR24&lt;BR&gt;
      RJ/RJR24&lt;BR&gt;
      RJ/RJR24&lt;BR&gt;
      RJ/RJR24&lt;BR&gt;
      RJ/RJR24&lt;BR&gt;
      RJ/RJR24&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
  &lt;/TR&gt;
  &lt;TR&gt;
    &lt;TD COLSPAN=8&gt;&amp;nbsp;
    &lt;/TD&gt;
  &lt;/TR&gt;
  &lt;TR&gt;
    &lt;TD COLSPAN=8&gt;
      &lt;FONT SIZE=4 FACE=ARIAL&gt;&lt;B&gt;SINGLE TURN&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
  &lt;/TR&gt;
  &lt;TR&gt;
    &lt;TD ALIGN=CENTER&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;BOURN&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD ALIGN=CENTER&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;BI&amp;nbsp;TECH&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD ALIGN=CENTER&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;DALE-VISHAY&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD ALIGN=CENTER&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;PHILIPS/MEPCO&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD ALIGN=CENTER&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;MURATA&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD ALIGN=CENTER&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;PANASONIC&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD ALIGN=CENTER&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;SPECTROL&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD ALIGN=CENTER&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;MILSPEC&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
  &lt;/TR&gt;
  &lt;TR&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      3323P&lt;BR&gt;
      3323S&lt;BR&gt;
      3323W&lt;BR&gt;
      3329H&lt;BR&gt;
      3329P&lt;BR&gt;
      3329W&lt;BR&gt;
      3339H&lt;BR&gt;
      3339P&lt;BR&gt;
      3339W&lt;BR&gt;
      3352E&lt;BR&gt;
      3352H&lt;BR&gt;
      3352K&lt;BR&gt;
      3352P&lt;BR&gt;
      3352T&lt;BR&gt;
      3352V&lt;BR&gt;
      3352W&lt;BR&gt;
      3362H&lt;BR&gt;
      3362M&lt;BR&gt;
      3362P&lt;BR&gt;
      3362R&lt;BR&gt;
      3362S&lt;BR&gt;
      3362U&lt;BR&gt;
      3362W&lt;BR&gt;
      3362X&lt;BR&gt;
      3386B&lt;BR&gt;
      3386C&lt;BR&gt;
      3386F&lt;BR&gt;
      3386H&lt;BR&gt;
      3386K&lt;BR&gt;
      3386M&lt;BR&gt;
      3386P&lt;BR&gt;
      3386S&lt;BR&gt;
      3386W&lt;BR&gt;
      3386X&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      25P&lt;BR&gt;
      25S&lt;BR&gt;
      25RX&lt;BR&gt;
      82P&lt;BR&gt;
      82M&lt;BR&gt;
      82PA&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      91E&lt;BR&gt;
      91X&lt;BR&gt;
      91T&lt;BR&gt;
      91B&lt;BR&gt;
      91A&lt;BR&gt;
      91V&lt;BR&gt;
      91W&lt;BR&gt;
      25W&lt;BR&gt;
      25V&lt;BR&gt;
      25P&lt;BR&gt;
      -&lt;BR&gt;
      25S&lt;BR&gt;
      25U&lt;BR&gt;
      25RX&lt;BR&gt;
      25X&lt;BR&gt;
      72XW&lt;BR&gt;
      72XL&lt;BR&gt;
      72PM&lt;BR&gt;
      72RX&lt;BR&gt;
      -&lt;BR&gt;
      72PX&lt;BR&gt;
      72P&lt;BR&gt;
      72RXW&lt;BR&gt;
      72RXL&lt;BR&gt;
      72X&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      T7YB&lt;BR&gt;
      T7YA&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      TXD&lt;BR&gt;
      TYA&lt;BR&gt;
      TYP&lt;BR&gt;
      -&lt;BR&gt;
      TYD&lt;BR&gt;
      TX&lt;BR&gt;
      -&lt;BR&gt;
      150SX&lt;BR&gt;
      100SX&lt;BR&gt;
      102T&lt;BR&gt;
      101S&lt;BR&gt;
      190T&lt;BR&gt;
      150TX&lt;BR&gt;
      101&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      101SX&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      ET6P&lt;BR&gt;
      ET6S&lt;BR&gt;
      ET6X&lt;BR&gt;
      RJ-6W/8014EMW&lt;BR&gt;
      RJ-6P/8014EMP&lt;BR&gt;
      RJ-6X/8014EMX&lt;BR&gt;
      TM7W&lt;BR&gt;
      TM7P&lt;BR&gt;
      TM7X&lt;BR&gt;
      -&lt;BR&gt;
      8017SMS&lt;BR&gt;
      -&lt;BR&gt;
      8017SMB&lt;BR&gt;
      8017SMA&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      CT-6W&lt;BR&gt;
      CT-6H&lt;BR&gt;
      CT-6P&lt;BR&gt;
      CT-6R&lt;BR&gt;
      -&lt;BR&gt;
      CT-6V&lt;BR&gt;
      CT-6X&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      8038EKV&lt;BR&gt;
      -&lt;BR&gt;
      8038EKX&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      8038EKP&lt;BR&gt;
      8038EKZ&lt;BR&gt;
      8038EKW&lt;BR&gt;
      -&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      3321H&lt;BR&gt;
      3321P&lt;BR&gt;
      3321N&lt;BR&gt;
      1102H&lt;BR&gt;
      1102P&lt;BR&gt;
      1102T&lt;BR&gt;
      RVA0911V304A&lt;BR&gt;
      -&lt;BR&gt;
      RVA0911H413A&lt;BR&gt;
      RVG0707V100A&lt;BR&gt;
      RVA0607V(H)306A&lt;BR&gt;
      RVA1214H213A&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      3104B&lt;BR&gt;
      3104C&lt;BR&gt;
      3104F&lt;BR&gt;
      3104H&lt;BR&gt;
      -&lt;BR&gt;
      3104M&lt;BR&gt;
      3104P&lt;BR&gt;
      3104S&lt;BR&gt;
      3104W&lt;BR&gt;
      3104X&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      EVMQ0G&lt;BR&gt;
      EVMQIG&lt;BR&gt;
      EVMQ3G&lt;BR&gt;
      EVMS0G&lt;BR&gt;
      EVMQ0G&lt;BR&gt;
      EVMG0G&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      EVMK4GA00B&lt;BR&gt;
      EVM30GA00B&lt;BR&gt;
      EVMK0GA00B&lt;BR&gt;
      EVM38GA00B&lt;BR&gt;
      EVMB6&lt;BR&gt;
      EVLQ0&lt;BR&gt;
      -&lt;BR&gt;
      EVMMSG&lt;BR&gt;
      EVMMBG&lt;BR&gt;
      EVMMAG&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      EVMMCS&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      EVMM1&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      EVMM0&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      EVMM3&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      62-3-1&lt;BR&gt;
      62-1-2&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      67R&lt;BR&gt;
      -&lt;BR&gt;
      67P&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      67X&lt;BR&gt;
      63V&lt;BR&gt;
      63S&lt;BR&gt;
      63M&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      63H&lt;BR&gt;
      63P&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      63X&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      RJ/RJR50&lt;BR&gt;
      RJ/RJR50&lt;BR&gt;
      RJ/RJR50&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
  &lt;/TR&gt;
&lt;/TABLE&gt;
&lt;P&gt;&amp;nbsp;&lt;P&gt;
&lt;TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3&gt;
  &lt;TR&gt;
    &lt;TD COLSPAN=7&gt;
      &lt;FONT color="#0000FF" SIZE=4 FACE=ARIAL&gt;&lt;B&gt;SMD TRIM-POT CROSS REFERENCE&lt;/B&gt;&lt;/FONT&gt;
      &lt;P&gt;
      &lt;FONT SIZE=4 FACE=ARIAL&gt;&lt;B&gt;MULTI-TURN&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
  &lt;/TR&gt;
  &lt;TR&gt;
    &lt;TD&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;BOURNS&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;BI&amp;nbsp;TECH&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;DALE-VISHAY&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;PHILIPS/MEPCO&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;PANASONIC&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;TOCOS&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;AUX/KYOCERA&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
  &lt;/TR&gt;
  &lt;TR&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      3224G&lt;BR&gt;
      3224J&lt;BR&gt;
      3224W&lt;BR&gt;
      3269P&lt;BR&gt;
      3269W&lt;BR&gt;
      3269X&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      44G&lt;BR&gt;
      44J&lt;BR&gt;
      44W&lt;BR&gt;
      84P&lt;BR&gt;
      84W&lt;BR&gt;
      84X&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      ST63Z&lt;BR&gt;
      ST63Y&lt;BR&gt;
      -&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      ST5P&lt;BR&gt;
      ST5W&lt;BR&gt;
      ST5X&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
  &lt;/TR&gt;
  &lt;TR&gt;
    &lt;TD COLSPAN=7&gt;&amp;nbsp;
    &lt;/TD&gt;
  &lt;/TR&gt;
  &lt;TR&gt;
    &lt;TD COLSPAN=7&gt;
      &lt;FONT SIZE=4 FACE=ARIAL&gt;&lt;B&gt;SINGLE TURN&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
  &lt;/TR&gt;
  &lt;TR&gt;
    &lt;TD&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;BOURNS&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;BI&amp;nbsp;TECH&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;DALE-VISHAY&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;PHILIPS/MEPCO&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;PANASONIC&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;TOCOS&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD&gt;
      &lt;FONT SIZE=3 FACE=ARIAL&gt;&lt;B&gt;AUX/KYOCERA&lt;/B&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
  &lt;/TR&gt;
  &lt;TR&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      3314G&lt;BR&gt;
      3314J&lt;BR&gt;
      3364A/B&lt;BR&gt;
      3364C/D&lt;BR&gt;
      3364W/X&lt;BR&gt;
      3313G&lt;BR&gt;
      3313J&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      23B&lt;BR&gt;
      23A&lt;BR&gt;
      21X&lt;BR&gt;
      21W&lt;BR&gt;
      -&lt;BR&gt;
      22B&lt;BR&gt;
      22A&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      ST5YL/ST53YL&lt;BR&gt;
      ST5YJ/5T53YJ&lt;BR&gt;
      ST-23A&lt;BR&gt;
      ST-22B&lt;BR&gt;
      ST-22&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      ST-4B&lt;BR&gt;
      ST-4A&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      ST-3B&lt;BR&gt;
      ST-3A&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      -&lt;BR&gt;
      EVM-6YS&lt;BR&gt;
      EVM-1E&lt;BR&gt;
      EVM-1G&lt;BR&gt;
      EVM-1D&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      G4B&lt;BR&gt;
      G4A&lt;BR&gt;
      TR04-3S1&lt;BR&gt;
      TRG04-2S1&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
    &lt;TD BGCOLOR="#cccccc" ALIGN=CENTER&gt;&lt;FONT FACE=ARIAL SIZE=3&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;
      DVR-43A&lt;BR&gt;
      CVR-42C&lt;BR&gt;
      CVR-42A/C&lt;BR&gt;
      -&lt;BR&gt;
      -&lt;BR&gt;&lt;/FONT&gt;
    &lt;/TD&gt;
  &lt;/TR&gt;
&lt;/TABLE&gt;
&lt;P&gt;
&lt;FONT SIZE=4 FACE=ARIAL&gt;&lt;B&gt;ALT =&amp;nbsp;ALTERNATE&lt;/B&gt;&lt;/FONT&gt;
&lt;P&gt;

&amp;nbsp;
&lt;P&gt;
&lt;/td&gt;
&lt;/tr&gt;
&lt;/table&gt;
&lt;/BODY&gt;&lt;/HTML&gt;</description>
<packages>
<package name="R0402" urn="urn:adsk.eagle:footprint:25625/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;</description>
<wire x1="-0.245" y1="0.224" x2="0.245" y2="0.224" width="0.1524" layer="51"/>
<wire x1="0.245" y1="-0.224" x2="-0.245" y2="-0.224" width="0.1524" layer="51"/>
<wire x1="-1.473" y1="0.483" x2="1.473" y2="0.483" width="0.0508" layer="39"/>
<wire x1="1.473" y1="0.483" x2="1.473" y2="-0.483" width="0.0508" layer="39"/>
<wire x1="1.473" y1="-0.483" x2="-1.473" y2="-0.483" width="0.0508" layer="39"/>
<wire x1="-1.473" y1="-0.483" x2="-1.473" y2="0.483" width="0.0508" layer="39"/>
<smd name="1" x="-0.65" y="0" dx="0.7" dy="0.9" layer="1"/>
<smd name="2" x="0.65" y="0" dx="0.7" dy="0.9" layer="1"/>
<text x="-0.635" y="0.635" size="1.27" layer="25">&gt;NAME</text>
<text x="-0.635" y="-1.905" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-0.554" y1="-0.3048" x2="-0.254" y2="0.2951" layer="51"/>
<rectangle x1="0.2588" y1="-0.3048" x2="0.5588" y2="0.2951" layer="51"/>
<rectangle x1="-0.1999" y1="-0.4001" x2="0.1999" y2="0.4001" layer="35"/>
</package>
<package name="R0603" urn="urn:adsk.eagle:footprint:25626/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;</description>
<wire x1="-0.432" y1="-0.356" x2="0.432" y2="-0.356" width="0.1524" layer="51"/>
<wire x1="0.432" y1="0.356" x2="-0.432" y2="0.356" width="0.1524" layer="51"/>
<wire x1="-1.473" y1="0.983" x2="1.473" y2="0.983" width="0.0508" layer="39"/>
<wire x1="1.473" y1="0.983" x2="1.473" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="1.473" y1="-0.983" x2="-1.473" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="-1.473" y1="-0.983" x2="-1.473" y2="0.983" width="0.0508" layer="39"/>
<smd name="1" x="-0.85" y="0" dx="1" dy="1.1" layer="1"/>
<smd name="2" x="0.85" y="0" dx="1" dy="1.1" layer="1"/>
<text x="-0.635" y="0.635" size="1.27" layer="25">&gt;NAME</text>
<text x="-0.635" y="-1.905" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="0.4318" y1="-0.4318" x2="0.8382" y2="0.4318" layer="51"/>
<rectangle x1="-0.8382" y1="-0.4318" x2="-0.4318" y2="0.4318" layer="51"/>
<rectangle x1="-0.1999" y1="-0.4001" x2="0.1999" y2="0.4001" layer="35"/>
</package>
<package name="R0805" urn="urn:adsk.eagle:footprint:25627/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;</description>
<wire x1="-0.41" y1="0.635" x2="0.41" y2="0.635" width="0.1524" layer="51"/>
<wire x1="-0.41" y1="-0.635" x2="0.41" y2="-0.635" width="0.1524" layer="51"/>
<wire x1="-1.973" y1="0.983" x2="1.973" y2="0.983" width="0.0508" layer="39"/>
<wire x1="1.973" y1="0.983" x2="1.973" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="1.973" y1="-0.983" x2="-1.973" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="-1.973" y1="-0.983" x2="-1.973" y2="0.983" width="0.0508" layer="39"/>
<smd name="1" x="-0.95" y="0" dx="1.3" dy="1.5" layer="1"/>
<smd name="2" x="0.95" y="0" dx="1.3" dy="1.5" layer="1"/>
<text x="-0.635" y="1.27" size="1.27" layer="25">&gt;NAME</text>
<text x="-0.635" y="-2.54" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="0.4064" y1="-0.6985" x2="1.0564" y2="0.7015" layer="51"/>
<rectangle x1="-1.0668" y1="-0.6985" x2="-0.4168" y2="0.7015" layer="51"/>
<rectangle x1="-0.1999" y1="-0.5001" x2="0.1999" y2="0.5001" layer="35"/>
</package>
<package name="R0805W" urn="urn:adsk.eagle:footprint:25628/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt; wave soldering&lt;p&gt;</description>
<wire x1="-0.41" y1="0.635" x2="0.41" y2="0.635" width="0.1524" layer="51"/>
<wire x1="-0.41" y1="-0.635" x2="0.41" y2="-0.635" width="0.1524" layer="51"/>
<wire x1="-1.973" y1="0.983" x2="1.973" y2="0.983" width="0.0508" layer="39"/>
<wire x1="1.973" y1="0.983" x2="1.973" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="1.973" y1="-0.983" x2="-1.973" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="-1.973" y1="-0.983" x2="-1.973" y2="0.983" width="0.0508" layer="39"/>
<smd name="1" x="-1.0525" y="0" dx="1.5" dy="1" layer="1"/>
<smd name="2" x="1.0525" y="0" dx="1.5" dy="1" layer="1"/>
<text x="-0.635" y="1.27" size="1.27" layer="25">&gt;NAME</text>
<text x="-0.635" y="-2.54" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="0.4064" y1="-0.6985" x2="1.0564" y2="0.7015" layer="51"/>
<rectangle x1="-1.0668" y1="-0.6985" x2="-0.4168" y2="0.7015" layer="51"/>
<rectangle x1="-0.1999" y1="-0.5001" x2="0.1999" y2="0.5001" layer="35"/>
</package>
<package name="R1206" urn="urn:adsk.eagle:footprint:25629/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;</description>
<wire x1="0.9525" y1="-0.8128" x2="-0.9652" y2="-0.8128" width="0.1524" layer="51"/>
<wire x1="0.9525" y1="0.8128" x2="-0.9652" y2="0.8128" width="0.1524" layer="51"/>
<wire x1="-2.473" y1="0.983" x2="2.473" y2="0.983" width="0.0508" layer="39"/>
<wire x1="2.473" y1="0.983" x2="2.473" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="2.473" y1="-0.983" x2="-2.473" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="-2.473" y1="-0.983" x2="-2.473" y2="0.983" width="0.0508" layer="39"/>
<smd name="2" x="1.422" y="0" dx="1.6" dy="1.803" layer="1"/>
<smd name="1" x="-1.422" y="0" dx="1.6" dy="1.803" layer="1"/>
<text x="-1.27" y="1.27" size="1.27" layer="25">&gt;NAME</text>
<text x="-1.27" y="-2.54" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-1.6891" y1="-0.8763" x2="-0.9525" y2="0.8763" layer="51"/>
<rectangle x1="0.9525" y1="-0.8763" x2="1.6891" y2="0.8763" layer="51"/>
<rectangle x1="-0.3" y1="-0.7" x2="0.3" y2="0.7" layer="35"/>
</package>
<package name="R1206W" urn="urn:adsk.eagle:footprint:25630/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
wave soldering</description>
<wire x1="-0.913" y1="0.8" x2="0.888" y2="0.8" width="0.1524" layer="51"/>
<wire x1="-0.913" y1="-0.8" x2="0.888" y2="-0.8" width="0.1524" layer="51"/>
<wire x1="-2.473" y1="0.983" x2="2.473" y2="0.983" width="0.0508" layer="39"/>
<wire x1="2.473" y1="0.983" x2="2.473" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="2.473" y1="-0.983" x2="-2.473" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="-2.473" y1="-0.983" x2="-2.473" y2="0.983" width="0.0508" layer="39"/>
<smd name="1" x="-1.499" y="0" dx="1.8" dy="1.2" layer="1"/>
<smd name="2" x="1.499" y="0" dx="1.8" dy="1.2" layer="1"/>
<text x="-1.905" y="1.27" size="1.27" layer="25">&gt;NAME</text>
<text x="-1.905" y="-2.54" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-1.651" y1="-0.8763" x2="-0.9009" y2="0.8738" layer="51"/>
<rectangle x1="0.889" y1="-0.8763" x2="1.6391" y2="0.8738" layer="51"/>
<rectangle x1="-0.3" y1="-0.7" x2="0.3" y2="0.7" layer="35"/>
</package>
<package name="R1210" urn="urn:adsk.eagle:footprint:25631/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;</description>
<wire x1="-0.913" y1="1.219" x2="0.939" y2="1.219" width="0.1524" layer="51"/>
<wire x1="-0.913" y1="-1.219" x2="0.939" y2="-1.219" width="0.1524" layer="51"/>
<wire x1="-2.473" y1="1.483" x2="2.473" y2="1.483" width="0.0508" layer="39"/>
<wire x1="2.473" y1="1.483" x2="2.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="2.473" y1="-1.483" x2="-2.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="-2.473" y1="-1.483" x2="-2.473" y2="1.483" width="0.0508" layer="39"/>
<smd name="1" x="-1.4" y="0" dx="1.6" dy="2.7" layer="1"/>
<smd name="2" x="1.4" y="0" dx="1.6" dy="2.7" layer="1"/>
<text x="-2.54" y="1.905" size="1.27" layer="25">&gt;NAME</text>
<text x="-2.54" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-1.651" y1="-1.3081" x2="-0.9009" y2="1.2918" layer="51"/>
<rectangle x1="0.9144" y1="-1.3081" x2="1.6645" y2="1.2918" layer="51"/>
<rectangle x1="-0.3" y1="-0.8999" x2="0.3" y2="0.8999" layer="35"/>
</package>
<package name="R1210W" urn="urn:adsk.eagle:footprint:25632/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
wave soldering</description>
<wire x1="-0.913" y1="1.219" x2="0.939" y2="1.219" width="0.1524" layer="51"/>
<wire x1="-0.913" y1="-1.219" x2="0.939" y2="-1.219" width="0.1524" layer="51"/>
<wire x1="-2.473" y1="1.483" x2="2.473" y2="1.483" width="0.0508" layer="39"/>
<wire x1="2.473" y1="1.483" x2="2.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="2.473" y1="-1.483" x2="-2.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="-2.473" y1="-1.483" x2="-2.473" y2="1.483" width="0.0508" layer="39"/>
<smd name="1" x="-1.499" y="0" dx="1.8" dy="1.8" layer="1"/>
<smd name="2" x="1.499" y="0" dx="1.8" dy="1.8" layer="1"/>
<text x="-2.54" y="1.905" size="1.27" layer="25">&gt;NAME</text>
<text x="-2.54" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-1.651" y1="-1.3081" x2="-0.9009" y2="1.2918" layer="51"/>
<rectangle x1="0.9144" y1="-1.3081" x2="1.6645" y2="1.2918" layer="51"/>
<rectangle x1="-0.3" y1="-0.8001" x2="0.3" y2="0.8001" layer="35"/>
</package>
<package name="R2010" urn="urn:adsk.eagle:footprint:25633/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;</description>
<wire x1="-1.662" y1="1.245" x2="1.662" y2="1.245" width="0.1524" layer="51"/>
<wire x1="-1.637" y1="-1.245" x2="1.687" y2="-1.245" width="0.1524" layer="51"/>
<wire x1="-3.473" y1="1.483" x2="3.473" y2="1.483" width="0.0508" layer="39"/>
<wire x1="3.473" y1="1.483" x2="3.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="3.473" y1="-1.483" x2="-3.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="-3.473" y1="-1.483" x2="-3.473" y2="1.483" width="0.0508" layer="39"/>
<smd name="1" x="-2.2" y="0" dx="1.8" dy="2.7" layer="1"/>
<smd name="2" x="2.2" y="0" dx="1.8" dy="2.7" layer="1"/>
<text x="-3.175" y="1.905" size="1.27" layer="25">&gt;NAME</text>
<text x="-3.175" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-2.4892" y1="-1.3208" x2="-1.6393" y2="1.3292" layer="51"/>
<rectangle x1="1.651" y1="-1.3208" x2="2.5009" y2="1.3292" layer="51"/>
</package>
<package name="R2010W" urn="urn:adsk.eagle:footprint:25634/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
wave soldering</description>
<wire x1="-1.662" y1="1.245" x2="1.662" y2="1.245" width="0.1524" layer="51"/>
<wire x1="-1.637" y1="-1.245" x2="1.687" y2="-1.245" width="0.1524" layer="51"/>
<wire x1="-3.473" y1="1.483" x2="3.473" y2="1.483" width="0.0508" layer="39"/>
<wire x1="3.473" y1="1.483" x2="3.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="3.473" y1="-1.483" x2="-3.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="-3.473" y1="-1.483" x2="-3.473" y2="1.483" width="0.0508" layer="39"/>
<smd name="1" x="-2.311" y="0" dx="2" dy="1.8" layer="1"/>
<smd name="2" x="2.311" y="0" dx="2" dy="1.8" layer="1"/>
<text x="-2.54" y="1.905" size="1.27" layer="25">&gt;NAME</text>
<text x="-2.54" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-2.4892" y1="-1.3208" x2="-1.6393" y2="1.3292" layer="51"/>
<rectangle x1="1.651" y1="-1.3208" x2="2.5009" y2="1.3292" layer="51"/>
</package>
<package name="R2012" urn="urn:adsk.eagle:footprint:25635/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;</description>
<wire x1="-0.41" y1="0.635" x2="0.41" y2="0.635" width="0.1524" layer="51"/>
<wire x1="-0.41" y1="-0.635" x2="0.41" y2="-0.635" width="0.1524" layer="51"/>
<wire x1="-1.973" y1="0.983" x2="1.973" y2="0.983" width="0.0508" layer="39"/>
<wire x1="1.973" y1="0.983" x2="1.973" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="1.973" y1="-0.983" x2="-1.973" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="-1.973" y1="-0.983" x2="-1.973" y2="0.983" width="0.0508" layer="39"/>
<smd name="1" x="-0.85" y="0" dx="1.3" dy="1.5" layer="1"/>
<smd name="2" x="0.85" y="0" dx="1.3" dy="1.5" layer="1"/>
<text x="-0.635" y="1.27" size="1.27" layer="25">&gt;NAME</text>
<text x="-0.635" y="-2.54" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="0.4064" y1="-0.6985" x2="1.0564" y2="0.7015" layer="51"/>
<rectangle x1="-1.0668" y1="-0.6985" x2="-0.4168" y2="0.7015" layer="51"/>
<rectangle x1="-0.1001" y1="-0.5999" x2="0.1001" y2="0.5999" layer="35"/>
</package>
<package name="R2012W" urn="urn:adsk.eagle:footprint:25636/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
wave soldering</description>
<wire x1="-0.41" y1="0.635" x2="0.41" y2="0.635" width="0.1524" layer="51"/>
<wire x1="-0.41" y1="-0.635" x2="0.41" y2="-0.635" width="0.1524" layer="51"/>
<wire x1="-1.973" y1="0.983" x2="1.973" y2="0.983" width="0.0508" layer="39"/>
<wire x1="1.973" y1="0.983" x2="1.973" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="1.973" y1="-0.983" x2="-1.973" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="-1.973" y1="-0.983" x2="-1.973" y2="0.983" width="0.0508" layer="39"/>
<smd name="1" x="-0.94" y="0" dx="1.5" dy="1" layer="1"/>
<smd name="2" x="0.94" y="0" dx="1.5" dy="1" layer="1"/>
<text x="-0.635" y="1.27" size="1.27" layer="25">&gt;NAME</text>
<text x="-0.635" y="-2.54" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="0.4064" y1="-0.6985" x2="1.0564" y2="0.7015" layer="51"/>
<rectangle x1="-1.0668" y1="-0.6985" x2="-0.4168" y2="0.7015" layer="51"/>
<rectangle x1="-0.1001" y1="-0.5999" x2="0.1001" y2="0.5999" layer="35"/>
</package>
<package name="R2512" urn="urn:adsk.eagle:footprint:25637/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;</description>
<wire x1="-2.362" y1="1.473" x2="2.387" y2="1.473" width="0.1524" layer="51"/>
<wire x1="-2.362" y1="-1.473" x2="2.387" y2="-1.473" width="0.1524" layer="51"/>
<wire x1="-3.973" y1="1.983" x2="3.973" y2="1.983" width="0.0508" layer="39"/>
<wire x1="3.973" y1="1.983" x2="3.973" y2="-1.983" width="0.0508" layer="39"/>
<wire x1="3.973" y1="-1.983" x2="-3.973" y2="-1.983" width="0.0508" layer="39"/>
<wire x1="-3.973" y1="-1.983" x2="-3.973" y2="1.983" width="0.0508" layer="39"/>
<smd name="1" x="-2.8" y="0" dx="1.8" dy="3.2" layer="1"/>
<smd name="2" x="2.8" y="0" dx="1.8" dy="3.2" layer="1"/>
<text x="-2.54" y="1.905" size="1.27" layer="25">&gt;NAME</text>
<text x="-2.54" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-3.2004" y1="-1.5494" x2="-2.3505" y2="1.5507" layer="51"/>
<rectangle x1="2.3622" y1="-1.5494" x2="3.2121" y2="1.5507" layer="51"/>
<rectangle x1="-0.5001" y1="-1" x2="0.5001" y2="1" layer="35"/>
</package>
<package name="R2512W" urn="urn:adsk.eagle:footprint:25638/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
wave soldering</description>
<wire x1="-2.362" y1="1.473" x2="2.387" y2="1.473" width="0.1524" layer="51"/>
<wire x1="-2.362" y1="-1.473" x2="2.387" y2="-1.473" width="0.1524" layer="51"/>
<wire x1="-3.973" y1="1.983" x2="3.973" y2="1.983" width="0.0508" layer="39"/>
<wire x1="3.973" y1="1.983" x2="3.973" y2="-1.983" width="0.0508" layer="39"/>
<wire x1="3.973" y1="-1.983" x2="-3.973" y2="-1.983" width="0.0508" layer="39"/>
<wire x1="-3.973" y1="-1.983" x2="-3.973" y2="1.983" width="0.0508" layer="39"/>
<smd name="1" x="-2.896" y="0" dx="2" dy="2.1" layer="1"/>
<smd name="2" x="2.896" y="0" dx="2" dy="2.1" layer="1"/>
<text x="-1.905" y="1.905" size="1.27" layer="25">&gt;NAME</text>
<text x="-1.905" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-3.2004" y1="-1.5494" x2="-2.3505" y2="1.5507" layer="51"/>
<rectangle x1="2.3622" y1="-1.5494" x2="3.2121" y2="1.5507" layer="51"/>
<rectangle x1="-0.5001" y1="-1" x2="0.5001" y2="1" layer="35"/>
</package>
<package name="R3216" urn="urn:adsk.eagle:footprint:25639/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;</description>
<wire x1="-0.913" y1="0.8" x2="0.888" y2="0.8" width="0.1524" layer="51"/>
<wire x1="-0.913" y1="-0.8" x2="0.888" y2="-0.8" width="0.1524" layer="51"/>
<wire x1="-2.473" y1="0.983" x2="2.473" y2="0.983" width="0.0508" layer="39"/>
<wire x1="2.473" y1="0.983" x2="2.473" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="2.473" y1="-0.983" x2="-2.473" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="-2.473" y1="-0.983" x2="-2.473" y2="0.983" width="0.0508" layer="39"/>
<smd name="1" x="-1.4" y="0" dx="1.6" dy="1.8" layer="1"/>
<smd name="2" x="1.4" y="0" dx="1.6" dy="1.8" layer="1"/>
<text x="-1.905" y="1.27" size="1.27" layer="25">&gt;NAME</text>
<text x="-1.905" y="-2.54" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-1.651" y1="-0.8763" x2="-0.9009" y2="0.8738" layer="51"/>
<rectangle x1="0.889" y1="-0.8763" x2="1.6391" y2="0.8738" layer="51"/>
<rectangle x1="-0.3" y1="-0.7" x2="0.3" y2="0.7" layer="35"/>
</package>
<package name="R3216W" urn="urn:adsk.eagle:footprint:25640/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
wave soldering</description>
<wire x1="-0.913" y1="0.8" x2="0.888" y2="0.8" width="0.1524" layer="51"/>
<wire x1="-0.913" y1="-0.8" x2="0.888" y2="-0.8" width="0.1524" layer="51"/>
<wire x1="-2.473" y1="0.983" x2="2.473" y2="0.983" width="0.0508" layer="39"/>
<wire x1="2.473" y1="0.983" x2="2.473" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="2.473" y1="-0.983" x2="-2.473" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="-2.473" y1="-0.983" x2="-2.473" y2="0.983" width="0.0508" layer="39"/>
<smd name="1" x="-1.499" y="0" dx="1.8" dy="1.2" layer="1"/>
<smd name="2" x="1.499" y="0" dx="1.8" dy="1.2" layer="1"/>
<text x="-1.905" y="1.27" size="1.27" layer="25">&gt;NAME</text>
<text x="-1.905" y="-2.54" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-1.651" y1="-0.8763" x2="-0.9009" y2="0.8738" layer="51"/>
<rectangle x1="0.889" y1="-0.8763" x2="1.6391" y2="0.8738" layer="51"/>
<rectangle x1="-0.3" y1="-0.7" x2="0.3" y2="0.7" layer="35"/>
</package>
<package name="R3225" urn="urn:adsk.eagle:footprint:25641/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;</description>
<wire x1="-0.913" y1="1.219" x2="0.939" y2="1.219" width="0.1524" layer="51"/>
<wire x1="-0.913" y1="-1.219" x2="0.939" y2="-1.219" width="0.1524" layer="51"/>
<wire x1="-2.473" y1="1.483" x2="2.473" y2="1.483" width="0.0508" layer="39"/>
<wire x1="2.473" y1="1.483" x2="2.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="2.473" y1="-1.483" x2="-2.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="-2.473" y1="-1.483" x2="-2.473" y2="1.483" width="0.0508" layer="39"/>
<smd name="1" x="-1.4" y="0" dx="1.6" dy="2.7" layer="1"/>
<smd name="2" x="1.4" y="0" dx="1.6" dy="2.7" layer="1"/>
<text x="-2.54" y="1.905" size="1.27" layer="25">&gt;NAME</text>
<text x="-2.54" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-1.651" y1="-1.3081" x2="-0.9009" y2="1.2918" layer="51"/>
<rectangle x1="0.9144" y1="-1.3081" x2="1.6645" y2="1.2918" layer="51"/>
<rectangle x1="-0.3" y1="-1" x2="0.3" y2="1" layer="35"/>
</package>
<package name="R3225W" urn="urn:adsk.eagle:footprint:25642/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
wave soldering</description>
<wire x1="-0.913" y1="1.219" x2="0.939" y2="1.219" width="0.1524" layer="51"/>
<wire x1="-0.913" y1="-1.219" x2="0.939" y2="-1.219" width="0.1524" layer="51"/>
<wire x1="-2.473" y1="1.483" x2="2.473" y2="1.483" width="0.0508" layer="39"/>
<wire x1="2.473" y1="1.483" x2="2.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="2.473" y1="-1.483" x2="-2.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="-2.473" y1="-1.483" x2="-2.473" y2="1.483" width="0.0508" layer="39"/>
<smd name="1" x="-1.499" y="0" dx="1.8" dy="1.8" layer="1"/>
<smd name="2" x="1.499" y="0" dx="1.8" dy="1.8" layer="1"/>
<text x="-1.905" y="1.905" size="1.27" layer="25">&gt;NAME</text>
<text x="-1.905" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-1.651" y1="-1.3081" x2="-0.9009" y2="1.2918" layer="51"/>
<rectangle x1="0.9144" y1="-1.3081" x2="1.6645" y2="1.2918" layer="51"/>
<rectangle x1="-0.3" y1="-1" x2="0.3" y2="1" layer="35"/>
</package>
<package name="R5025" urn="urn:adsk.eagle:footprint:25643/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;</description>
<wire x1="-1.662" y1="1.245" x2="1.662" y2="1.245" width="0.1524" layer="51"/>
<wire x1="-1.637" y1="-1.245" x2="1.687" y2="-1.245" width="0.1524" layer="51"/>
<wire x1="-3.473" y1="1.483" x2="3.473" y2="1.483" width="0.0508" layer="39"/>
<wire x1="3.473" y1="1.483" x2="3.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="3.473" y1="-1.483" x2="-3.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="-3.473" y1="-1.483" x2="-3.473" y2="1.483" width="0.0508" layer="39"/>
<smd name="1" x="-2.2" y="0" dx="1.8" dy="2.7" layer="1"/>
<smd name="2" x="2.2" y="0" dx="1.8" dy="2.7" layer="1"/>
<text x="-3.175" y="1.905" size="1.27" layer="25">&gt;NAME</text>
<text x="-3.175" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-2.4892" y1="-1.3208" x2="-1.6393" y2="1.3292" layer="51"/>
<rectangle x1="1.651" y1="-1.3208" x2="2.5009" y2="1.3292" layer="51"/>
<rectangle x1="-0.5001" y1="-1" x2="0.5001" y2="1" layer="35"/>
</package>
<package name="R5025W" urn="urn:adsk.eagle:footprint:25644/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
wave soldering</description>
<wire x1="-1.662" y1="1.245" x2="1.662" y2="1.245" width="0.1524" layer="51"/>
<wire x1="-1.637" y1="-1.245" x2="1.687" y2="-1.245" width="0.1524" layer="51"/>
<wire x1="-3.473" y1="1.483" x2="3.473" y2="1.483" width="0.0508" layer="39"/>
<wire x1="3.473" y1="1.483" x2="3.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="3.473" y1="-1.483" x2="-3.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="-3.473" y1="-1.483" x2="-3.473" y2="1.483" width="0.0508" layer="39"/>
<smd name="1" x="-2.311" y="0" dx="2" dy="1.8" layer="1"/>
<smd name="2" x="2.311" y="0" dx="2" dy="1.8" layer="1"/>
<text x="-3.175" y="1.905" size="1.27" layer="25">&gt;NAME</text>
<text x="-3.175" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-2.4892" y1="-1.3208" x2="-1.6393" y2="1.3292" layer="51"/>
<rectangle x1="1.651" y1="-1.3208" x2="2.5009" y2="1.3292" layer="51"/>
<rectangle x1="-0.5001" y1="-1" x2="0.5001" y2="1" layer="35"/>
</package>
<package name="R6332" urn="urn:adsk.eagle:footprint:25645/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf</description>
<wire x1="-2.362" y1="1.473" x2="2.387" y2="1.473" width="0.1524" layer="51"/>
<wire x1="-2.362" y1="-1.473" x2="2.387" y2="-1.473" width="0.1524" layer="51"/>
<wire x1="-3.973" y1="1.983" x2="3.973" y2="1.983" width="0.0508" layer="39"/>
<wire x1="3.973" y1="1.983" x2="3.973" y2="-1.983" width="0.0508" layer="39"/>
<wire x1="3.973" y1="-1.983" x2="-3.973" y2="-1.983" width="0.0508" layer="39"/>
<wire x1="-3.973" y1="-1.983" x2="-3.973" y2="1.983" width="0.0508" layer="39"/>
<smd name="1" x="-3.1" y="0" dx="1" dy="3.2" layer="1"/>
<smd name="2" x="3.1" y="0" dx="1" dy="3.2" layer="1"/>
<text x="-2.54" y="1.905" size="1.27" layer="25">&gt;NAME</text>
<text x="-2.54" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-3.2004" y1="-1.5494" x2="-2.3505" y2="1.5507" layer="51"/>
<rectangle x1="2.3622" y1="-1.5494" x2="3.2121" y2="1.5507" layer="51"/>
<rectangle x1="-0.5001" y1="-1" x2="0.5001" y2="1" layer="35"/>
</package>
<package name="R6332W" urn="urn:adsk.eagle:footprint:25646/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt; wave soldering&lt;p&gt;
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf</description>
<wire x1="-2.362" y1="1.473" x2="2.387" y2="1.473" width="0.1524" layer="51"/>
<wire x1="-2.362" y1="-1.473" x2="2.387" y2="-1.473" width="0.1524" layer="51"/>
<wire x1="-3.973" y1="1.983" x2="3.973" y2="1.983" width="0.0508" layer="39"/>
<wire x1="3.973" y1="1.983" x2="3.973" y2="-1.983" width="0.0508" layer="39"/>
<wire x1="3.973" y1="-1.983" x2="-3.973" y2="-1.983" width="0.0508" layer="39"/>
<wire x1="-3.973" y1="-1.983" x2="-3.973" y2="1.983" width="0.0508" layer="39"/>
<smd name="1" x="-3.196" y="0" dx="1.2" dy="3.2" layer="1"/>
<smd name="2" x="3.196" y="0" dx="1.2" dy="3.2" layer="1"/>
<text x="-2.54" y="1.905" size="1.27" layer="25">&gt;NAME</text>
<text x="-2.54" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-3.2004" y1="-1.5494" x2="-2.3505" y2="1.5507" layer="51"/>
<rectangle x1="2.3622" y1="-1.5494" x2="3.2121" y2="1.5507" layer="51"/>
<rectangle x1="-0.5001" y1="-1" x2="0.5001" y2="1" layer="35"/>
</package>
<package name="M0805" urn="urn:adsk.eagle:footprint:25647/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
MELF 0.10 W</description>
<wire x1="-1.973" y1="0.983" x2="1.973" y2="0.983" width="0.0508" layer="39"/>
<wire x1="1.973" y1="-0.983" x2="-1.973" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="-1.973" y1="-0.983" x2="-1.973" y2="0.983" width="0.0508" layer="39"/>
<wire x1="1.973" y1="0.983" x2="1.973" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="0.7112" y1="0.635" x2="-0.7112" y2="0.635" width="0.1524" layer="51"/>
<wire x1="0.7112" y1="-0.635" x2="-0.7112" y2="-0.635" width="0.1524" layer="51"/>
<smd name="1" x="-0.95" y="0" dx="1.3" dy="1.6" layer="1"/>
<smd name="2" x="0.95" y="0" dx="1.3" dy="1.6" layer="1"/>
<text x="-1.27" y="1.27" size="1.27" layer="25">&gt;NAME</text>
<text x="-1.27" y="-2.54" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-1.0414" y1="-0.7112" x2="-0.6858" y2="0.7112" layer="51"/>
<rectangle x1="0.6858" y1="-0.7112" x2="1.0414" y2="0.7112" layer="51"/>
<rectangle x1="-0.1999" y1="-0.5999" x2="0.1999" y2="0.5999" layer="35"/>
</package>
<package name="M1206" urn="urn:adsk.eagle:footprint:25648/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
MELF 0.25 W</description>
<wire x1="-2.473" y1="1.483" x2="2.473" y2="1.483" width="0.0508" layer="39"/>
<wire x1="2.473" y1="-1.483" x2="-2.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="-2.473" y1="-1.483" x2="-2.473" y2="1.483" width="0.0508" layer="39"/>
<wire x1="2.473" y1="1.483" x2="2.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="1.143" y1="0.8382" x2="-1.143" y2="0.8382" width="0.1524" layer="51"/>
<wire x1="1.143" y1="-0.8382" x2="-1.143" y2="-0.8382" width="0.1524" layer="51"/>
<smd name="1" x="-1.4" y="0" dx="1.6" dy="2" layer="1"/>
<smd name="2" x="1.4" y="0" dx="1.6" dy="2" layer="1"/>
<text x="-1.27" y="1.27" size="1.27" layer="25">&gt;NAME</text>
<text x="-1.27" y="-2.54" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-1.7018" y1="-0.9144" x2="-1.1176" y2="0.9144" layer="51"/>
<rectangle x1="1.1176" y1="-0.9144" x2="1.7018" y2="0.9144" layer="51"/>
<rectangle x1="-0.3" y1="-0.8001" x2="0.3" y2="0.8001" layer="35"/>
</package>
<package name="M1406" urn="urn:adsk.eagle:footprint:25649/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
MELF 0.12 W</description>
<wire x1="-2.973" y1="0.983" x2="2.973" y2="0.983" width="0.0508" layer="39"/>
<wire x1="2.973" y1="-0.983" x2="-2.973" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="-2.973" y1="-0.983" x2="-2.973" y2="0.983" width="0.0508" layer="39"/>
<wire x1="2.973" y1="0.983" x2="2.973" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="1.3208" y1="0.762" x2="-1.3208" y2="0.762" width="0.1524" layer="51"/>
<wire x1="1.3208" y1="-0.762" x2="-1.3208" y2="-0.762" width="0.1524" layer="51"/>
<smd name="1" x="-1.7" y="0" dx="1.4" dy="1.8" layer="1"/>
<smd name="2" x="1.7" y="0" dx="1.4" dy="1.8" layer="1"/>
<text x="-1.27" y="1.27" size="1.27" layer="25">&gt;NAME</text>
<text x="-1.27" y="-2.54" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-1.8542" y1="-0.8382" x2="-1.2954" y2="0.8382" layer="51"/>
<rectangle x1="1.2954" y1="-0.8382" x2="1.8542" y2="0.8382" layer="51"/>
<rectangle x1="-0.3" y1="-0.7" x2="0.3" y2="0.7" layer="35"/>
</package>
<package name="M2012" urn="urn:adsk.eagle:footprint:25650/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
MELF 0.10 W</description>
<wire x1="-1.973" y1="0.983" x2="1.973" y2="0.983" width="0.0508" layer="39"/>
<wire x1="1.973" y1="-0.983" x2="-1.973" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="-1.973" y1="-0.983" x2="-1.973" y2="0.983" width="0.0508" layer="39"/>
<wire x1="1.973" y1="0.983" x2="1.973" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="0.7112" y1="0.635" x2="-0.7112" y2="0.635" width="0.1524" layer="51"/>
<wire x1="0.7112" y1="-0.635" x2="-0.7112" y2="-0.635" width="0.1524" layer="51"/>
<smd name="1" x="-0.95" y="0" dx="1.3" dy="1.6" layer="1"/>
<smd name="2" x="0.95" y="0" dx="1.3" dy="1.6" layer="1"/>
<text x="-1.27" y="1.27" size="1.27" layer="25">&gt;NAME</text>
<text x="-1.27" y="-2.54" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-1.0414" y1="-0.7112" x2="-0.6858" y2="0.7112" layer="51"/>
<rectangle x1="0.6858" y1="-0.7112" x2="1.0414" y2="0.7112" layer="51"/>
<rectangle x1="-0.1999" y1="-0.5999" x2="0.1999" y2="0.5999" layer="35"/>
</package>
<package name="M2309" urn="urn:adsk.eagle:footprint:25651/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
MELF 0.25 W</description>
<wire x1="-4.473" y1="1.483" x2="4.473" y2="1.483" width="0.0508" layer="39"/>
<wire x1="4.473" y1="-1.483" x2="-4.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="-4.473" y1="-1.483" x2="-4.473" y2="1.483" width="0.0508" layer="39"/>
<wire x1="4.473" y1="1.483" x2="4.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="2.413" y1="1.1684" x2="-2.4384" y2="1.1684" width="0.1524" layer="51"/>
<wire x1="2.413" y1="-1.1684" x2="-2.413" y2="-1.1684" width="0.1524" layer="51"/>
<smd name="1" x="-2.85" y="0" dx="1.5" dy="2.6" layer="1"/>
<smd name="2" x="2.85" y="0" dx="1.5" dy="2.6" layer="1"/>
<text x="-1.905" y="1.905" size="1.27" layer="25">&gt;NAME</text>
<text x="-2.54" y="-2.54" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-3.048" y1="-1.2446" x2="-2.3876" y2="1.2446" layer="51"/>
<rectangle x1="2.3876" y1="-1.2446" x2="3.048" y2="1.2446" layer="51"/>
<rectangle x1="-0.5001" y1="-1" x2="0.5001" y2="1" layer="35"/>
</package>
<package name="M3216" urn="urn:adsk.eagle:footprint:25652/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
MELF 0.25 W</description>
<wire x1="-2.473" y1="1.483" x2="2.473" y2="1.483" width="0.0508" layer="39"/>
<wire x1="2.473" y1="-1.483" x2="-2.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="-2.473" y1="-1.483" x2="-2.473" y2="1.483" width="0.0508" layer="39"/>
<wire x1="2.473" y1="1.483" x2="2.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="1.143" y1="0.8382" x2="-1.143" y2="0.8382" width="0.1524" layer="51"/>
<wire x1="1.143" y1="-0.8382" x2="-1.143" y2="-0.8382" width="0.1524" layer="51"/>
<smd name="1" x="-1.4" y="0" dx="1.6" dy="2" layer="1"/>
<smd name="2" x="1.4" y="0" dx="1.6" dy="2" layer="1"/>
<text x="-1.27" y="1.27" size="1.27" layer="25">&gt;NAME</text>
<text x="-1.27" y="-2.54" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-1.7018" y1="-0.9144" x2="-1.1176" y2="0.9144" layer="51"/>
<rectangle x1="1.1176" y1="-0.9144" x2="1.7018" y2="0.9144" layer="51"/>
<rectangle x1="-0.3" y1="-0.8001" x2="0.3" y2="0.8001" layer="35"/>
</package>
<package name="M3516" urn="urn:adsk.eagle:footprint:25653/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
MELF 0.12 W</description>
<wire x1="-2.973" y1="0.983" x2="2.973" y2="0.983" width="0.0508" layer="39"/>
<wire x1="2.973" y1="-0.983" x2="-2.973" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="-2.973" y1="-0.983" x2="-2.973" y2="0.983" width="0.0508" layer="39"/>
<wire x1="2.973" y1="0.983" x2="2.973" y2="-0.983" width="0.0508" layer="39"/>
<wire x1="1.3208" y1="0.762" x2="-1.3208" y2="0.762" width="0.1524" layer="51"/>
<wire x1="1.3208" y1="-0.762" x2="-1.3208" y2="-0.762" width="0.1524" layer="51"/>
<smd name="1" x="-1.7" y="0" dx="1.4" dy="1.8" layer="1"/>
<smd name="2" x="1.7" y="0" dx="1.4" dy="1.8" layer="1"/>
<text x="-1.27" y="1.27" size="1.27" layer="25">&gt;NAME</text>
<text x="-1.27" y="-2.54" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-1.8542" y1="-0.8382" x2="-1.2954" y2="0.8382" layer="51"/>
<rectangle x1="1.2954" y1="-0.8382" x2="1.8542" y2="0.8382" layer="51"/>
<rectangle x1="-0.4001" y1="-0.7" x2="0.4001" y2="0.7" layer="35"/>
</package>
<package name="M5923" urn="urn:adsk.eagle:footprint:25654/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
MELF 0.25 W</description>
<wire x1="-4.473" y1="1.483" x2="4.473" y2="1.483" width="0.0508" layer="39"/>
<wire x1="4.473" y1="-1.483" x2="-4.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="-4.473" y1="-1.483" x2="-4.473" y2="1.483" width="0.0508" layer="39"/>
<wire x1="4.473" y1="1.483" x2="4.473" y2="-1.483" width="0.0508" layer="39"/>
<wire x1="2.413" y1="1.1684" x2="-2.4384" y2="1.1684" width="0.1524" layer="51"/>
<wire x1="2.413" y1="-1.1684" x2="-2.413" y2="-1.1684" width="0.1524" layer="51"/>
<smd name="1" x="-2.85" y="0" dx="1.5" dy="2.6" layer="1"/>
<smd name="2" x="2.85" y="0" dx="1.5" dy="2.6" layer="1"/>
<text x="-1.905" y="1.905" size="1.27" layer="25">&gt;NAME</text>
<text x="-2.54" y="-2.54" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-3.048" y1="-1.2446" x2="-2.3876" y2="1.2446" layer="51"/>
<rectangle x1="2.3876" y1="-1.2446" x2="3.048" y2="1.2446" layer="51"/>
<rectangle x1="-0.5001" y1="-1" x2="0.5001" y2="1" layer="35"/>
</package>
<package name="0204/5" urn="urn:adsk.eagle:footprint:25500/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0204, grid 5 mm</description>
<wire x1="2.54" y1="0" x2="2.032" y2="0" width="0.508" layer="51"/>
<wire x1="-2.54" y1="0" x2="-2.032" y2="0" width="0.508" layer="51"/>
<wire x1="-1.778" y1="0.635" x2="-1.524" y2="0.889" width="0.1524" layer="21" curve="-90"/>
<wire x1="-1.778" y1="-0.635" x2="-1.524" y2="-0.889" width="0.1524" layer="21" curve="90"/>
<wire x1="1.524" y1="-0.889" x2="1.778" y2="-0.635" width="0.1524" layer="21" curve="90"/>
<wire x1="1.524" y1="0.889" x2="1.778" y2="0.635" width="0.1524" layer="21" curve="-90"/>
<wire x1="-1.778" y1="-0.635" x2="-1.778" y2="0.635" width="0.1524" layer="51"/>
<wire x1="-1.524" y1="0.889" x2="-1.27" y2="0.889" width="0.1524" layer="21"/>
<wire x1="-1.143" y1="0.762" x2="-1.27" y2="0.889" width="0.1524" layer="21"/>
<wire x1="-1.524" y1="-0.889" x2="-1.27" y2="-0.889" width="0.1524" layer="21"/>
<wire x1="-1.143" y1="-0.762" x2="-1.27" y2="-0.889" width="0.1524" layer="21"/>
<wire x1="1.143" y1="0.762" x2="1.27" y2="0.889" width="0.1524" layer="21"/>
<wire x1="1.143" y1="0.762" x2="-1.143" y2="0.762" width="0.1524" layer="21"/>
<wire x1="1.143" y1="-0.762" x2="1.27" y2="-0.889" width="0.1524" layer="21"/>
<wire x1="1.143" y1="-0.762" x2="-1.143" y2="-0.762" width="0.1524" layer="21"/>
<wire x1="1.524" y1="0.889" x2="1.27" y2="0.889" width="0.1524" layer="21"/>
<wire x1="1.524" y1="-0.889" x2="1.27" y2="-0.889" width="0.1524" layer="21"/>
<wire x1="1.778" y1="-0.635" x2="1.778" y2="0.635" width="0.1524" layer="51"/>
<pad name="1" x="-2.54" y="0" drill="0.8128" shape="octagon"/>
<pad name="2" x="2.54" y="0" drill="0.8128" shape="octagon"/>
<text x="-2.0066" y="1.1684" size="0.9906" layer="25" ratio="10">&gt;NAME</text>
<text x="-2.1336" y="-2.3114" size="0.9906" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="-2.032" y1="-0.254" x2="-1.778" y2="0.254" layer="51"/>
<rectangle x1="1.778" y1="-0.254" x2="2.032" y2="0.254" layer="51"/>
</package>
<package name="0204/7" urn="urn:adsk.eagle:footprint:25507/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0204, grid 7.5 mm</description>
<wire x1="3.81" y1="0" x2="2.921" y2="0" width="0.508" layer="51"/>
<wire x1="-3.81" y1="0" x2="-2.921" y2="0" width="0.508" layer="51"/>
<wire x1="-2.54" y1="0.762" x2="-2.286" y2="1.016" width="0.1524" layer="21" curve="-90"/>
<wire x1="-2.54" y1="-0.762" x2="-2.286" y2="-1.016" width="0.1524" layer="21" curve="90"/>
<wire x1="2.286" y1="-1.016" x2="2.54" y2="-0.762" width="0.1524" layer="21" curve="90"/>
<wire x1="2.286" y1="1.016" x2="2.54" y2="0.762" width="0.1524" layer="21" curve="-90"/>
<wire x1="-2.54" y1="-0.762" x2="-2.54" y2="0.762" width="0.1524" layer="21"/>
<wire x1="-2.286" y1="1.016" x2="-1.905" y2="1.016" width="0.1524" layer="21"/>
<wire x1="-1.778" y1="0.889" x2="-1.905" y2="1.016" width="0.1524" layer="21"/>
<wire x1="-2.286" y1="-1.016" x2="-1.905" y2="-1.016" width="0.1524" layer="21"/>
<wire x1="-1.778" y1="-0.889" x2="-1.905" y2="-1.016" width="0.1524" layer="21"/>
<wire x1="1.778" y1="0.889" x2="1.905" y2="1.016" width="0.1524" layer="21"/>
<wire x1="1.778" y1="0.889" x2="-1.778" y2="0.889" width="0.1524" layer="21"/>
<wire x1="1.778" y1="-0.889" x2="1.905" y2="-1.016" width="0.1524" layer="21"/>
<wire x1="1.778" y1="-0.889" x2="-1.778" y2="-0.889" width="0.1524" layer="21"/>
<wire x1="2.286" y1="1.016" x2="1.905" y2="1.016" width="0.1524" layer="21"/>
<wire x1="2.286" y1="-1.016" x2="1.905" y2="-1.016" width="0.1524" layer="21"/>
<wire x1="2.54" y1="-0.762" x2="2.54" y2="0.762" width="0.1524" layer="21"/>
<pad name="1" x="-3.81" y="0" drill="0.8128" shape="octagon"/>
<pad name="2" x="3.81" y="0" drill="0.8128" shape="octagon"/>
<text x="-2.54" y="1.2954" size="0.9906" layer="25" ratio="10">&gt;NAME</text>
<text x="-1.6256" y="-0.4826" size="0.9906" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="2.54" y1="-0.254" x2="2.921" y2="0.254" layer="21"/>
<rectangle x1="-2.921" y1="-0.254" x2="-2.54" y2="0.254" layer="21"/>
</package>
<package name="0207/10" urn="urn:adsk.eagle:footprint:25501/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0207, grid 10 mm</description>
<wire x1="5.08" y1="0" x2="4.064" y2="0" width="0.6096" layer="51"/>
<wire x1="-5.08" y1="0" x2="-4.064" y2="0" width="0.6096" layer="51"/>
<wire x1="-3.175" y1="0.889" x2="-2.921" y2="1.143" width="0.1524" layer="21" curve="-90"/>
<wire x1="-3.175" y1="-0.889" x2="-2.921" y2="-1.143" width="0.1524" layer="21" curve="90"/>
<wire x1="2.921" y1="-1.143" x2="3.175" y2="-0.889" width="0.1524" layer="21" curve="90"/>
<wire x1="2.921" y1="1.143" x2="3.175" y2="0.889" width="0.1524" layer="21" curve="-90"/>
<wire x1="-3.175" y1="-0.889" x2="-3.175" y2="0.889" width="0.1524" layer="21"/>
<wire x1="-2.921" y1="1.143" x2="-2.54" y2="1.143" width="0.1524" layer="21"/>
<wire x1="-2.413" y1="1.016" x2="-2.54" y2="1.143" width="0.1524" layer="21"/>
<wire x1="-2.921" y1="-1.143" x2="-2.54" y2="-1.143" width="0.1524" layer="21"/>
<wire x1="-2.413" y1="-1.016" x2="-2.54" y2="-1.143" width="0.1524" layer="21"/>
<wire x1="2.413" y1="1.016" x2="2.54" y2="1.143" width="0.1524" layer="21"/>
<wire x1="2.413" y1="1.016" x2="-2.413" y2="1.016" width="0.1524" layer="21"/>
<wire x1="2.413" y1="-1.016" x2="2.54" y2="-1.143" width="0.1524" layer="21"/>
<wire x1="2.413" y1="-1.016" x2="-2.413" y2="-1.016" width="0.1524" layer="21"/>
<wire x1="2.921" y1="1.143" x2="2.54" y2="1.143" width="0.1524" layer="21"/>
<wire x1="2.921" y1="-1.143" x2="2.54" y2="-1.143" width="0.1524" layer="21"/>
<wire x1="3.175" y1="-0.889" x2="3.175" y2="0.889" width="0.1524" layer="21"/>
<pad name="1" x="-5.08" y="0" drill="0.8128" shape="octagon"/>
<pad name="2" x="5.08" y="0" drill="0.8128" shape="octagon"/>
<text x="-3.048" y="1.524" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-2.2606" y="-0.635" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="3.175" y1="-0.3048" x2="4.0386" y2="0.3048" layer="21"/>
<rectangle x1="-4.0386" y1="-0.3048" x2="-3.175" y2="0.3048" layer="21"/>
</package>
<package name="0207/12" urn="urn:adsk.eagle:footprint:25502/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0207, grid 12 mm</description>
<wire x1="6.35" y1="0" x2="5.334" y2="0" width="0.6096" layer="51"/>
<wire x1="-6.35" y1="0" x2="-5.334" y2="0" width="0.6096" layer="51"/>
<wire x1="-3.175" y1="0.889" x2="-2.921" y2="1.143" width="0.1524" layer="21" curve="-90"/>
<wire x1="-3.175" y1="-0.889" x2="-2.921" y2="-1.143" width="0.1524" layer="21" curve="90"/>
<wire x1="2.921" y1="-1.143" x2="3.175" y2="-0.889" width="0.1524" layer="21" curve="90"/>
<wire x1="2.921" y1="1.143" x2="3.175" y2="0.889" width="0.1524" layer="21" curve="-90"/>
<wire x1="-3.175" y1="-0.889" x2="-3.175" y2="0.889" width="0.1524" layer="21"/>
<wire x1="-2.921" y1="1.143" x2="-2.54" y2="1.143" width="0.1524" layer="21"/>
<wire x1="-2.413" y1="1.016" x2="-2.54" y2="1.143" width="0.1524" layer="21"/>
<wire x1="-2.921" y1="-1.143" x2="-2.54" y2="-1.143" width="0.1524" layer="21"/>
<wire x1="-2.413" y1="-1.016" x2="-2.54" y2="-1.143" width="0.1524" layer="21"/>
<wire x1="2.413" y1="1.016" x2="2.54" y2="1.143" width="0.1524" layer="21"/>
<wire x1="2.413" y1="1.016" x2="-2.413" y2="1.016" width="0.1524" layer="21"/>
<wire x1="2.413" y1="-1.016" x2="2.54" y2="-1.143" width="0.1524" layer="21"/>
<wire x1="2.413" y1="-1.016" x2="-2.413" y2="-1.016" width="0.1524" layer="21"/>
<wire x1="2.921" y1="1.143" x2="2.54" y2="1.143" width="0.1524" layer="21"/>
<wire x1="2.921" y1="-1.143" x2="2.54" y2="-1.143" width="0.1524" layer="21"/>
<wire x1="3.175" y1="-0.889" x2="3.175" y2="0.889" width="0.1524" layer="21"/>
<wire x1="4.445" y1="0" x2="4.064" y2="0" width="0.6096" layer="21"/>
<wire x1="-4.445" y1="0" x2="-4.064" y2="0" width="0.6096" layer="21"/>
<pad name="1" x="-6.35" y="0" drill="0.8128" shape="octagon"/>
<pad name="2" x="6.35" y="0" drill="0.8128" shape="octagon"/>
<text x="-3.175" y="1.397" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-2.286" y="-0.6858" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="3.175" y1="-0.3048" x2="4.0386" y2="0.3048" layer="21"/>
<rectangle x1="-4.0386" y1="-0.3048" x2="-3.175" y2="0.3048" layer="21"/>
<rectangle x1="4.445" y1="-0.3048" x2="5.3086" y2="0.3048" layer="21"/>
<rectangle x1="-5.3086" y1="-0.3048" x2="-4.445" y2="0.3048" layer="21"/>
</package>
<package name="0207/15" urn="urn:adsk.eagle:footprint:25506/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0207, grid 15mm</description>
<wire x1="7.62" y1="0" x2="6.604" y2="0" width="0.6096" layer="51"/>
<wire x1="-7.62" y1="0" x2="-6.604" y2="0" width="0.6096" layer="51"/>
<wire x1="-3.175" y1="0.889" x2="-2.921" y2="1.143" width="0.1524" layer="21" curve="-90"/>
<wire x1="-3.175" y1="-0.889" x2="-2.921" y2="-1.143" width="0.1524" layer="21" curve="90"/>
<wire x1="2.921" y1="-1.143" x2="3.175" y2="-0.889" width="0.1524" layer="21" curve="90"/>
<wire x1="2.921" y1="1.143" x2="3.175" y2="0.889" width="0.1524" layer="21" curve="-90"/>
<wire x1="-3.175" y1="-0.889" x2="-3.175" y2="0.889" width="0.1524" layer="21"/>
<wire x1="-2.921" y1="1.143" x2="-2.54" y2="1.143" width="0.1524" layer="21"/>
<wire x1="-2.413" y1="1.016" x2="-2.54" y2="1.143" width="0.1524" layer="21"/>
<wire x1="-2.921" y1="-1.143" x2="-2.54" y2="-1.143" width="0.1524" layer="21"/>
<wire x1="-2.413" y1="-1.016" x2="-2.54" y2="-1.143" width="0.1524" layer="21"/>
<wire x1="2.413" y1="1.016" x2="2.54" y2="1.143" width="0.1524" layer="21"/>
<wire x1="2.413" y1="1.016" x2="-2.413" y2="1.016" width="0.1524" layer="21"/>
<wire x1="2.413" y1="-1.016" x2="2.54" y2="-1.143" width="0.1524" layer="21"/>
<wire x1="2.413" y1="-1.016" x2="-2.413" y2="-1.016" width="0.1524" layer="21"/>
<wire x1="2.921" y1="1.143" x2="2.54" y2="1.143" width="0.1524" layer="21"/>
<wire x1="2.921" y1="-1.143" x2="2.54" y2="-1.143" width="0.1524" layer="21"/>
<wire x1="3.175" y1="-0.889" x2="3.175" y2="0.889" width="0.1524" layer="21"/>
<wire x1="5.715" y1="0" x2="4.064" y2="0" width="0.6096" layer="21"/>
<wire x1="-5.715" y1="0" x2="-4.064" y2="0" width="0.6096" layer="21"/>
<pad name="1" x="-7.62" y="0" drill="0.8128" shape="octagon"/>
<pad name="2" x="7.62" y="0" drill="0.8128" shape="octagon"/>
<text x="-3.175" y="1.397" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-2.286" y="-0.6858" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="3.175" y1="-0.3048" x2="4.0386" y2="0.3048" layer="21"/>
<rectangle x1="-4.0386" y1="-0.3048" x2="-3.175" y2="0.3048" layer="21"/>
<rectangle x1="5.715" y1="-0.3048" x2="6.5786" y2="0.3048" layer="21"/>
<rectangle x1="-6.5786" y1="-0.3048" x2="-5.715" y2="0.3048" layer="21"/>
</package>
<package name="0207/2V" urn="urn:adsk.eagle:footprint:25503/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0207, grid 2.5 mm</description>
<wire x1="-1.27" y1="0" x2="-0.381" y2="0" width="0.6096" layer="51"/>
<wire x1="-0.254" y1="0" x2="0.254" y2="0" width="0.6096" layer="21"/>
<wire x1="0.381" y1="0" x2="1.27" y2="0" width="0.6096" layer="51"/>
<circle x="-1.27" y="0" radius="1.27" width="0.1524" layer="21"/>
<circle x="-1.27" y="0" radius="1.016" width="0.1524" layer="51"/>
<pad name="1" x="-1.27" y="0" drill="0.8128" shape="octagon"/>
<pad name="2" x="1.27" y="0" drill="0.8128" shape="octagon"/>
<text x="-0.0508" y="1.016" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-0.0508" y="-2.2352" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
</package>
<package name="0207/5V" urn="urn:adsk.eagle:footprint:25504/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0207, grid 5 mm</description>
<wire x1="-2.54" y1="0" x2="-0.889" y2="0" width="0.6096" layer="51"/>
<wire x1="-0.762" y1="0" x2="0.762" y2="0" width="0.6096" layer="21"/>
<wire x1="0.889" y1="0" x2="2.54" y2="0" width="0.6096" layer="51"/>
<circle x="-2.54" y="0" radius="1.27" width="0.1016" layer="21"/>
<circle x="-2.54" y="0" radius="1.016" width="0.1524" layer="51"/>
<pad name="1" x="-2.54" y="0" drill="0.8128" shape="octagon"/>
<pad name="2" x="2.54" y="0" drill="0.8128" shape="octagon"/>
<text x="-1.143" y="0.889" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-1.143" y="-2.159" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
</package>
<package name="0207/7" urn="urn:adsk.eagle:footprint:25505/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0207, grid 7.5 mm</description>
<wire x1="-3.81" y1="0" x2="-3.429" y2="0" width="0.6096" layer="51"/>
<wire x1="-3.175" y1="0.889" x2="-2.921" y2="1.143" width="0.1524" layer="21" curve="-90"/>
<wire x1="-3.175" y1="-0.889" x2="-2.921" y2="-1.143" width="0.1524" layer="21" curve="90"/>
<wire x1="2.921" y1="-1.143" x2="3.175" y2="-0.889" width="0.1524" layer="21" curve="90"/>
<wire x1="2.921" y1="1.143" x2="3.175" y2="0.889" width="0.1524" layer="21" curve="-90"/>
<wire x1="-3.175" y1="-0.889" x2="-3.175" y2="0.889" width="0.1524" layer="51"/>
<wire x1="-2.921" y1="1.143" x2="-2.54" y2="1.143" width="0.1524" layer="21"/>
<wire x1="-2.413" y1="1.016" x2="-2.54" y2="1.143" width="0.1524" layer="21"/>
<wire x1="-2.921" y1="-1.143" x2="-2.54" y2="-1.143" width="0.1524" layer="21"/>
<wire x1="-2.413" y1="-1.016" x2="-2.54" y2="-1.143" width="0.1524" layer="21"/>
<wire x1="2.413" y1="1.016" x2="2.54" y2="1.143" width="0.1524" layer="21"/>
<wire x1="2.413" y1="1.016" x2="-2.413" y2="1.016" width="0.1524" layer="21"/>
<wire x1="2.413" y1="-1.016" x2="2.54" y2="-1.143" width="0.1524" layer="21"/>
<wire x1="2.413" y1="-1.016" x2="-2.413" y2="-1.016" width="0.1524" layer="21"/>
<wire x1="2.921" y1="1.143" x2="2.54" y2="1.143" width="0.1524" layer="21"/>
<wire x1="2.921" y1="-1.143" x2="2.54" y2="-1.143" width="0.1524" layer="21"/>
<wire x1="3.175" y1="-0.889" x2="3.175" y2="0.889" width="0.1524" layer="51"/>
<wire x1="3.429" y1="0" x2="3.81" y2="0" width="0.6096" layer="51"/>
<pad name="1" x="-3.81" y="0" drill="0.8128" shape="octagon"/>
<pad name="2" x="3.81" y="0" drill="0.8128" shape="octagon"/>
<text x="-2.54" y="1.397" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-2.286" y="-0.5588" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="-3.429" y1="-0.3048" x2="-3.175" y2="0.3048" layer="51"/>
<rectangle x1="3.175" y1="-0.3048" x2="3.429" y2="0.3048" layer="51"/>
</package>
<package name="0309/10" urn="urn:adsk.eagle:footprint:25655/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0309, grid 10mm</description>
<wire x1="-4.699" y1="0" x2="-5.08" y2="0" width="0.6096" layer="51"/>
<wire x1="-4.318" y1="1.27" x2="-4.064" y2="1.524" width="0.1524" layer="21" curve="-90"/>
<wire x1="-4.318" y1="-1.27" x2="-4.064" y2="-1.524" width="0.1524" layer="21" curve="90"/>
<wire x1="4.064" y1="-1.524" x2="4.318" y2="-1.27" width="0.1524" layer="21" curve="90"/>
<wire x1="4.064" y1="1.524" x2="4.318" y2="1.27" width="0.1524" layer="21" curve="-90"/>
<wire x1="-4.318" y1="-1.27" x2="-4.318" y2="1.27" width="0.1524" layer="51"/>
<wire x1="-4.064" y1="1.524" x2="-3.429" y2="1.524" width="0.1524" layer="21"/>
<wire x1="-3.302" y1="1.397" x2="-3.429" y2="1.524" width="0.1524" layer="21"/>
<wire x1="-4.064" y1="-1.524" x2="-3.429" y2="-1.524" width="0.1524" layer="21"/>
<wire x1="-3.302" y1="-1.397" x2="-3.429" y2="-1.524" width="0.1524" layer="21"/>
<wire x1="3.302" y1="1.397" x2="3.429" y2="1.524" width="0.1524" layer="21"/>
<wire x1="3.302" y1="1.397" x2="-3.302" y2="1.397" width="0.1524" layer="21"/>
<wire x1="3.302" y1="-1.397" x2="3.429" y2="-1.524" width="0.1524" layer="21"/>
<wire x1="3.302" y1="-1.397" x2="-3.302" y2="-1.397" width="0.1524" layer="21"/>
<wire x1="4.064" y1="1.524" x2="3.429" y2="1.524" width="0.1524" layer="21"/>
<wire x1="4.064" y1="-1.524" x2="3.429" y2="-1.524" width="0.1524" layer="21"/>
<wire x1="4.318" y1="-1.27" x2="4.318" y2="1.27" width="0.1524" layer="51"/>
<wire x1="5.08" y1="0" x2="4.699" y2="0" width="0.6096" layer="51"/>
<pad name="1" x="-5.08" y="0" drill="0.8128" shape="octagon"/>
<pad name="2" x="5.08" y="0" drill="0.8128" shape="octagon"/>
<text x="-4.191" y="1.905" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-3.175" y="-0.6858" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="-4.6228" y1="-0.3048" x2="-4.318" y2="0.3048" layer="51"/>
<rectangle x1="4.318" y1="-0.3048" x2="4.6228" y2="0.3048" layer="51"/>
</package>
<package name="0309/12" urn="urn:adsk.eagle:footprint:25656/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0309, grid 12.5 mm</description>
<wire x1="6.35" y1="0" x2="5.08" y2="0" width="0.6096" layer="51"/>
<wire x1="-6.35" y1="0" x2="-5.08" y2="0" width="0.6096" layer="51"/>
<wire x1="-4.318" y1="1.27" x2="-4.064" y2="1.524" width="0.1524" layer="21" curve="-90"/>
<wire x1="-4.318" y1="-1.27" x2="-4.064" y2="-1.524" width="0.1524" layer="21" curve="90"/>
<wire x1="4.064" y1="-1.524" x2="4.318" y2="-1.27" width="0.1524" layer="21" curve="90"/>
<wire x1="4.064" y1="1.524" x2="4.318" y2="1.27" width="0.1524" layer="21" curve="-90"/>
<wire x1="-4.318" y1="-1.27" x2="-4.318" y2="1.27" width="0.1524" layer="21"/>
<wire x1="-4.064" y1="1.524" x2="-3.429" y2="1.524" width="0.1524" layer="21"/>
<wire x1="-3.302" y1="1.397" x2="-3.429" y2="1.524" width="0.1524" layer="21"/>
<wire x1="-4.064" y1="-1.524" x2="-3.429" y2="-1.524" width="0.1524" layer="21"/>
<wire x1="-3.302" y1="-1.397" x2="-3.429" y2="-1.524" width="0.1524" layer="21"/>
<wire x1="3.302" y1="1.397" x2="3.429" y2="1.524" width="0.1524" layer="21"/>
<wire x1="3.302" y1="1.397" x2="-3.302" y2="1.397" width="0.1524" layer="21"/>
<wire x1="3.302" y1="-1.397" x2="3.429" y2="-1.524" width="0.1524" layer="21"/>
<wire x1="3.302" y1="-1.397" x2="-3.302" y2="-1.397" width="0.1524" layer="21"/>
<wire x1="4.064" y1="1.524" x2="3.429" y2="1.524" width="0.1524" layer="21"/>
<wire x1="4.064" y1="-1.524" x2="3.429" y2="-1.524" width="0.1524" layer="21"/>
<wire x1="4.318" y1="-1.27" x2="4.318" y2="1.27" width="0.1524" layer="21"/>
<pad name="1" x="-6.35" y="0" drill="0.8128" shape="octagon"/>
<pad name="2" x="6.35" y="0" drill="0.8128" shape="octagon"/>
<text x="-4.191" y="1.905" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-3.175" y="-0.6858" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="4.318" y1="-0.3048" x2="5.1816" y2="0.3048" layer="21"/>
<rectangle x1="-5.1816" y1="-0.3048" x2="-4.318" y2="0.3048" layer="21"/>
</package>
<package name="0411/12" urn="urn:adsk.eagle:footprint:25658/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0411, grid 12.5 mm</description>
<wire x1="6.35" y1="0" x2="5.461" y2="0" width="0.762" layer="51"/>
<wire x1="-6.35" y1="0" x2="-5.461" y2="0" width="0.762" layer="51"/>
<wire x1="5.08" y1="-1.651" x2="5.08" y2="1.651" width="0.1524" layer="21"/>
<wire x1="4.699" y1="2.032" x2="5.08" y2="1.651" width="0.1524" layer="21" curve="-90"/>
<wire x1="-5.08" y1="-1.651" x2="-4.699" y2="-2.032" width="0.1524" layer="21" curve="90"/>
<wire x1="4.699" y1="-2.032" x2="5.08" y2="-1.651" width="0.1524" layer="21" curve="90"/>
<wire x1="-5.08" y1="1.651" x2="-4.699" y2="2.032" width="0.1524" layer="21" curve="-90"/>
<wire x1="4.699" y1="2.032" x2="4.064" y2="2.032" width="0.1524" layer="21"/>
<wire x1="3.937" y1="1.905" x2="4.064" y2="2.032" width="0.1524" layer="21"/>
<wire x1="4.699" y1="-2.032" x2="4.064" y2="-2.032" width="0.1524" layer="21"/>
<wire x1="3.937" y1="-1.905" x2="4.064" y2="-2.032" width="0.1524" layer="21"/>
<wire x1="-3.937" y1="1.905" x2="-4.064" y2="2.032" width="0.1524" layer="21"/>
<wire x1="-3.937" y1="1.905" x2="3.937" y2="1.905" width="0.1524" layer="21"/>
<wire x1="-3.937" y1="-1.905" x2="-4.064" y2="-2.032" width="0.1524" layer="21"/>
<wire x1="-3.937" y1="-1.905" x2="3.937" y2="-1.905" width="0.1524" layer="21"/>
<wire x1="-5.08" y1="1.651" x2="-5.08" y2="-1.651" width="0.1524" layer="21"/>
<wire x1="-4.699" y1="2.032" x2="-4.064" y2="2.032" width="0.1524" layer="21"/>
<wire x1="-4.699" y1="-2.032" x2="-4.064" y2="-2.032" width="0.1524" layer="21"/>
<pad name="1" x="-6.35" y="0" drill="0.9144" shape="octagon"/>
<pad name="2" x="6.35" y="0" drill="0.9144" shape="octagon"/>
<text x="-5.08" y="2.413" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-3.5814" y="-0.635" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="-5.3594" y1="-0.381" x2="-5.08" y2="0.381" layer="21"/>
<rectangle x1="5.08" y1="-0.381" x2="5.3594" y2="0.381" layer="21"/>
</package>
<package name="0411/15" urn="urn:adsk.eagle:footprint:25659/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0411, grid 15 mm</description>
<wire x1="5.08" y1="-1.651" x2="5.08" y2="1.651" width="0.1524" layer="21"/>
<wire x1="4.699" y1="2.032" x2="5.08" y2="1.651" width="0.1524" layer="21" curve="-90"/>
<wire x1="-5.08" y1="-1.651" x2="-4.699" y2="-2.032" width="0.1524" layer="21" curve="90"/>
<wire x1="4.699" y1="-2.032" x2="5.08" y2="-1.651" width="0.1524" layer="21" curve="90"/>
<wire x1="-5.08" y1="1.651" x2="-4.699" y2="2.032" width="0.1524" layer="21" curve="-90"/>
<wire x1="4.699" y1="2.032" x2="4.064" y2="2.032" width="0.1524" layer="21"/>
<wire x1="3.937" y1="1.905" x2="4.064" y2="2.032" width="0.1524" layer="21"/>
<wire x1="4.699" y1="-2.032" x2="4.064" y2="-2.032" width="0.1524" layer="21"/>
<wire x1="3.937" y1="-1.905" x2="4.064" y2="-2.032" width="0.1524" layer="21"/>
<wire x1="-3.937" y1="1.905" x2="-4.064" y2="2.032" width="0.1524" layer="21"/>
<wire x1="-3.937" y1="1.905" x2="3.937" y2="1.905" width="0.1524" layer="21"/>
<wire x1="-3.937" y1="-1.905" x2="-4.064" y2="-2.032" width="0.1524" layer="21"/>
<wire x1="-3.937" y1="-1.905" x2="3.937" y2="-1.905" width="0.1524" layer="21"/>
<wire x1="-5.08" y1="1.651" x2="-5.08" y2="-1.651" width="0.1524" layer="21"/>
<wire x1="-4.699" y1="2.032" x2="-4.064" y2="2.032" width="0.1524" layer="21"/>
<wire x1="-4.699" y1="-2.032" x2="-4.064" y2="-2.032" width="0.1524" layer="21"/>
<wire x1="-7.62" y1="0" x2="-6.35" y2="0" width="0.762" layer="51"/>
<wire x1="6.35" y1="0" x2="7.62" y2="0" width="0.762" layer="51"/>
<pad name="1" x="-7.62" y="0" drill="0.9144" shape="octagon"/>
<pad name="2" x="7.62" y="0" drill="0.9144" shape="octagon"/>
<text x="-5.08" y="2.413" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-3.5814" y="-0.635" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="5.08" y1="-0.381" x2="6.477" y2="0.381" layer="21"/>
<rectangle x1="-6.477" y1="-0.381" x2="-5.08" y2="0.381" layer="21"/>
</package>
<package name="0411V" urn="urn:adsk.eagle:footprint:25660/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0411, grid 3.81 mm</description>
<wire x1="1.27" y1="0" x2="0.3048" y2="0" width="0.762" layer="51"/>
<wire x1="-1.5748" y1="0" x2="-2.54" y2="0" width="0.762" layer="51"/>
<circle x="-2.54" y="0" radius="2.032" width="0.1524" layer="21"/>
<circle x="-2.54" y="0" radius="1.016" width="0.1524" layer="51"/>
<pad name="1" x="-2.54" y="0" drill="0.9144" shape="octagon"/>
<pad name="2" x="1.27" y="0" drill="0.9144" shape="octagon"/>
<text x="-0.508" y="1.143" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-0.5334" y="-2.413" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="-1.4732" y1="-0.381" x2="0.2032" y2="0.381" layer="21"/>
</package>
<package name="0414/15" urn="urn:adsk.eagle:footprint:25661/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0414, grid 15 mm</description>
<wire x1="7.62" y1="0" x2="6.604" y2="0" width="0.8128" layer="51"/>
<wire x1="-7.62" y1="0" x2="-6.604" y2="0" width="0.8128" layer="51"/>
<wire x1="-6.096" y1="1.905" x2="-5.842" y2="2.159" width="0.1524" layer="21" curve="-90"/>
<wire x1="-6.096" y1="-1.905" x2="-5.842" y2="-2.159" width="0.1524" layer="21" curve="90"/>
<wire x1="5.842" y1="-2.159" x2="6.096" y2="-1.905" width="0.1524" layer="21" curve="90"/>
<wire x1="5.842" y1="2.159" x2="6.096" y2="1.905" width="0.1524" layer="21" curve="-90"/>
<wire x1="-6.096" y1="-1.905" x2="-6.096" y2="1.905" width="0.1524" layer="21"/>
<wire x1="-5.842" y1="2.159" x2="-4.953" y2="2.159" width="0.1524" layer="21"/>
<wire x1="-4.826" y1="2.032" x2="-4.953" y2="2.159" width="0.1524" layer="21"/>
<wire x1="-5.842" y1="-2.159" x2="-4.953" y2="-2.159" width="0.1524" layer="21"/>
<wire x1="-4.826" y1="-2.032" x2="-4.953" y2="-2.159" width="0.1524" layer="21"/>
<wire x1="4.826" y1="2.032" x2="4.953" y2="2.159" width="0.1524" layer="21"/>
<wire x1="4.826" y1="2.032" x2="-4.826" y2="2.032" width="0.1524" layer="21"/>
<wire x1="4.826" y1="-2.032" x2="4.953" y2="-2.159" width="0.1524" layer="21"/>
<wire x1="4.826" y1="-2.032" x2="-4.826" y2="-2.032" width="0.1524" layer="21"/>
<wire x1="5.842" y1="2.159" x2="4.953" y2="2.159" width="0.1524" layer="21"/>
<wire x1="5.842" y1="-2.159" x2="4.953" y2="-2.159" width="0.1524" layer="21"/>
<wire x1="6.096" y1="-1.905" x2="6.096" y2="1.905" width="0.1524" layer="21"/>
<pad name="1" x="-7.62" y="0" drill="1.016" shape="octagon"/>
<pad name="2" x="7.62" y="0" drill="1.016" shape="octagon"/>
<text x="-6.096" y="2.5654" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-4.318" y="-0.5842" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="6.096" y1="-0.4064" x2="6.5024" y2="0.4064" layer="21"/>
<rectangle x1="-6.5024" y1="-0.4064" x2="-6.096" y2="0.4064" layer="21"/>
</package>
<package name="0414V" urn="urn:adsk.eagle:footprint:25662/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0414, grid 5 mm</description>
<wire x1="2.54" y1="0" x2="1.397" y2="0" width="0.8128" layer="51"/>
<wire x1="-2.54" y1="0" x2="-1.397" y2="0" width="0.8128" layer="51"/>
<circle x="-2.54" y="0" radius="2.159" width="0.1524" layer="21"/>
<circle x="-2.54" y="0" radius="1.143" width="0.1524" layer="51"/>
<pad name="1" x="-2.54" y="0" drill="1.016" shape="octagon"/>
<pad name="2" x="2.54" y="0" drill="1.016" shape="octagon"/>
<text x="-0.381" y="1.1684" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-0.381" y="-2.3622" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="-1.2954" y1="-0.4064" x2="1.2954" y2="0.4064" layer="21"/>
</package>
<package name="0617/17" urn="urn:adsk.eagle:footprint:25663/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0617, grid 17.5 mm</description>
<wire x1="-8.89" y1="0" x2="-8.636" y2="0" width="0.8128" layer="51"/>
<wire x1="-7.874" y1="3.048" x2="-6.985" y2="3.048" width="0.1524" layer="21"/>
<wire x1="-6.731" y1="2.794" x2="-6.985" y2="3.048" width="0.1524" layer="21"/>
<wire x1="-7.874" y1="-3.048" x2="-6.985" y2="-3.048" width="0.1524" layer="21"/>
<wire x1="-6.731" y1="-2.794" x2="-6.985" y2="-3.048" width="0.1524" layer="21"/>
<wire x1="6.731" y1="2.794" x2="6.985" y2="3.048" width="0.1524" layer="21"/>
<wire x1="6.731" y1="2.794" x2="-6.731" y2="2.794" width="0.1524" layer="21"/>
<wire x1="6.731" y1="-2.794" x2="6.985" y2="-3.048" width="0.1524" layer="21"/>
<wire x1="6.731" y1="-2.794" x2="-6.731" y2="-2.794" width="0.1524" layer="21"/>
<wire x1="7.874" y1="3.048" x2="6.985" y2="3.048" width="0.1524" layer="21"/>
<wire x1="7.874" y1="-3.048" x2="6.985" y2="-3.048" width="0.1524" layer="21"/>
<wire x1="-8.255" y1="-2.667" x2="-8.255" y2="-1.016" width="0.1524" layer="21"/>
<wire x1="-8.255" y1="1.016" x2="-8.255" y2="-1.016" width="0.1524" layer="51"/>
<wire x1="-8.255" y1="1.016" x2="-8.255" y2="2.667" width="0.1524" layer="21"/>
<wire x1="8.255" y1="-2.667" x2="8.255" y2="-1.016" width="0.1524" layer="21"/>
<wire x1="8.255" y1="1.016" x2="8.255" y2="-1.016" width="0.1524" layer="51"/>
<wire x1="8.255" y1="1.016" x2="8.255" y2="2.667" width="0.1524" layer="21"/>
<wire x1="8.636" y1="0" x2="8.89" y2="0" width="0.8128" layer="51"/>
<wire x1="-8.255" y1="2.667" x2="-7.874" y2="3.048" width="0.1524" layer="21" curve="-90"/>
<wire x1="7.874" y1="3.048" x2="8.255" y2="2.667" width="0.1524" layer="21" curve="-90"/>
<wire x1="-8.255" y1="-2.667" x2="-7.874" y2="-3.048" width="0.1524" layer="21" curve="90"/>
<wire x1="7.874" y1="-3.048" x2="8.255" y2="-2.667" width="0.1524" layer="21" curve="90"/>
<pad name="1" x="-8.89" y="0" drill="1.016" shape="octagon"/>
<pad name="2" x="8.89" y="0" drill="1.016" shape="octagon"/>
<text x="-8.128" y="3.4544" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-6.096" y="-0.7112" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="-8.5344" y1="-0.4064" x2="-8.2296" y2="0.4064" layer="51"/>
<rectangle x1="8.2296" y1="-0.4064" x2="8.5344" y2="0.4064" layer="51"/>
</package>
<package name="0617/22" urn="urn:adsk.eagle:footprint:25664/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0617, grid 22.5 mm</description>
<wire x1="-10.287" y1="0" x2="-11.43" y2="0" width="0.8128" layer="51"/>
<wire x1="-8.255" y1="-2.667" x2="-8.255" y2="2.667" width="0.1524" layer="21"/>
<wire x1="-7.874" y1="3.048" x2="-6.985" y2="3.048" width="0.1524" layer="21"/>
<wire x1="-6.731" y1="2.794" x2="-6.985" y2="3.048" width="0.1524" layer="21"/>
<wire x1="-7.874" y1="-3.048" x2="-6.985" y2="-3.048" width="0.1524" layer="21"/>
<wire x1="-6.731" y1="-2.794" x2="-6.985" y2="-3.048" width="0.1524" layer="21"/>
<wire x1="6.731" y1="2.794" x2="6.985" y2="3.048" width="0.1524" layer="21"/>
<wire x1="6.731" y1="2.794" x2="-6.731" y2="2.794" width="0.1524" layer="21"/>
<wire x1="6.731" y1="-2.794" x2="6.985" y2="-3.048" width="0.1524" layer="21"/>
<wire x1="6.731" y1="-2.794" x2="-6.731" y2="-2.794" width="0.1524" layer="21"/>
<wire x1="7.874" y1="3.048" x2="6.985" y2="3.048" width="0.1524" layer="21"/>
<wire x1="7.874" y1="-3.048" x2="6.985" y2="-3.048" width="0.1524" layer="21"/>
<wire x1="8.255" y1="-2.667" x2="8.255" y2="2.667" width="0.1524" layer="21"/>
<wire x1="11.43" y1="0" x2="10.287" y2="0" width="0.8128" layer="51"/>
<wire x1="-8.255" y1="2.667" x2="-7.874" y2="3.048" width="0.1524" layer="21" curve="-90"/>
<wire x1="-8.255" y1="-2.667" x2="-7.874" y2="-3.048" width="0.1524" layer="21" curve="90"/>
<wire x1="7.874" y1="3.048" x2="8.255" y2="2.667" width="0.1524" layer="21" curve="-90"/>
<wire x1="7.874" y1="-3.048" x2="8.255" y2="-2.667" width="0.1524" layer="21" curve="90"/>
<pad name="1" x="-11.43" y="0" drill="1.016" shape="octagon"/>
<pad name="2" x="11.43" y="0" drill="1.016" shape="octagon"/>
<text x="-8.255" y="3.4544" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-6.477" y="-0.5842" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="-10.1854" y1="-0.4064" x2="-8.255" y2="0.4064" layer="21"/>
<rectangle x1="8.255" y1="-0.4064" x2="10.1854" y2="0.4064" layer="21"/>
</package>
<package name="0617V" urn="urn:adsk.eagle:footprint:25665/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0617, grid 5 mm</description>
<wire x1="-2.54" y1="0" x2="-1.27" y2="0" width="0.8128" layer="51"/>
<wire x1="1.27" y1="0" x2="2.54" y2="0" width="0.8128" layer="51"/>
<circle x="-2.54" y="0" radius="3.048" width="0.1524" layer="21"/>
<circle x="-2.54" y="0" radius="1.143" width="0.1524" layer="51"/>
<pad name="1" x="-2.54" y="0" drill="1.016" shape="octagon"/>
<pad name="2" x="2.54" y="0" drill="1.016" shape="octagon"/>
<text x="0.635" y="1.4224" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="0.635" y="-2.6162" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="-1.3208" y1="-0.4064" x2="1.3208" y2="0.4064" layer="21"/>
</package>
<package name="0922/22" urn="urn:adsk.eagle:footprint:25666/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0922, grid 22.5 mm</description>
<wire x1="11.43" y1="0" x2="10.795" y2="0" width="0.8128" layer="51"/>
<wire x1="-11.43" y1="0" x2="-10.795" y2="0" width="0.8128" layer="51"/>
<wire x1="-10.16" y1="-4.191" x2="-10.16" y2="4.191" width="0.1524" layer="21"/>
<wire x1="-9.779" y1="4.572" x2="-8.89" y2="4.572" width="0.1524" layer="21"/>
<wire x1="-8.636" y1="4.318" x2="-8.89" y2="4.572" width="0.1524" layer="21"/>
<wire x1="-9.779" y1="-4.572" x2="-8.89" y2="-4.572" width="0.1524" layer="21"/>
<wire x1="-8.636" y1="-4.318" x2="-8.89" y2="-4.572" width="0.1524" layer="21"/>
<wire x1="8.636" y1="4.318" x2="8.89" y2="4.572" width="0.1524" layer="21"/>
<wire x1="8.636" y1="4.318" x2="-8.636" y2="4.318" width="0.1524" layer="21"/>
<wire x1="8.636" y1="-4.318" x2="8.89" y2="-4.572" width="0.1524" layer="21"/>
<wire x1="8.636" y1="-4.318" x2="-8.636" y2="-4.318" width="0.1524" layer="21"/>
<wire x1="9.779" y1="4.572" x2="8.89" y2="4.572" width="0.1524" layer="21"/>
<wire x1="9.779" y1="-4.572" x2="8.89" y2="-4.572" width="0.1524" layer="21"/>
<wire x1="10.16" y1="-4.191" x2="10.16" y2="4.191" width="0.1524" layer="21"/>
<wire x1="-10.16" y1="-4.191" x2="-9.779" y2="-4.572" width="0.1524" layer="21" curve="90"/>
<wire x1="-10.16" y1="4.191" x2="-9.779" y2="4.572" width="0.1524" layer="21" curve="-90"/>
<wire x1="9.779" y1="-4.572" x2="10.16" y2="-4.191" width="0.1524" layer="21" curve="90"/>
<wire x1="9.779" y1="4.572" x2="10.16" y2="4.191" width="0.1524" layer="21" curve="-90"/>
<pad name="1" x="-11.43" y="0" drill="1.016" shape="octagon"/>
<pad name="2" x="11.43" y="0" drill="1.016" shape="octagon"/>
<text x="-10.16" y="5.1054" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-6.477" y="-0.5842" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="-10.7188" y1="-0.4064" x2="-10.16" y2="0.4064" layer="51"/>
<rectangle x1="10.16" y1="-0.4064" x2="10.3124" y2="0.4064" layer="21"/>
<rectangle x1="-10.3124" y1="-0.4064" x2="-10.16" y2="0.4064" layer="21"/>
<rectangle x1="10.16" y1="-0.4064" x2="10.7188" y2="0.4064" layer="51"/>
</package>
<package name="P0613V" urn="urn:adsk.eagle:footprint:25667/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0613, grid 5 mm</description>
<wire x1="2.54" y1="0" x2="1.397" y2="0" width="0.8128" layer="51"/>
<wire x1="-2.54" y1="0" x2="-1.397" y2="0" width="0.8128" layer="51"/>
<circle x="-2.54" y="0" radius="2.286" width="0.1524" layer="21"/>
<circle x="-2.54" y="0" radius="1.143" width="0.1524" layer="51"/>
<pad name="1" x="-2.54" y="0" drill="1.016" shape="octagon"/>
<pad name="2" x="2.54" y="0" drill="1.016" shape="octagon"/>
<text x="-0.254" y="1.143" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-0.254" y="-2.413" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="-1.2954" y1="-0.4064" x2="1.3208" y2="0.4064" layer="21"/>
</package>
<package name="P0613/15" urn="urn:adsk.eagle:footprint:25668/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0613, grid 15 mm</description>
<wire x1="7.62" y1="0" x2="6.985" y2="0" width="0.8128" layer="51"/>
<wire x1="-7.62" y1="0" x2="-6.985" y2="0" width="0.8128" layer="51"/>
<wire x1="-6.477" y1="2.032" x2="-6.223" y2="2.286" width="0.1524" layer="21" curve="-90"/>
<wire x1="-6.477" y1="-2.032" x2="-6.223" y2="-2.286" width="0.1524" layer="21" curve="90"/>
<wire x1="6.223" y1="-2.286" x2="6.477" y2="-2.032" width="0.1524" layer="21" curve="90"/>
<wire x1="6.223" y1="2.286" x2="6.477" y2="2.032" width="0.1524" layer="21" curve="-90"/>
<wire x1="-6.223" y1="2.286" x2="-5.334" y2="2.286" width="0.1524" layer="21"/>
<wire x1="-5.207" y1="2.159" x2="-5.334" y2="2.286" width="0.1524" layer="21"/>
<wire x1="-6.223" y1="-2.286" x2="-5.334" y2="-2.286" width="0.1524" layer="21"/>
<wire x1="-5.207" y1="-2.159" x2="-5.334" y2="-2.286" width="0.1524" layer="21"/>
<wire x1="5.207" y1="2.159" x2="5.334" y2="2.286" width="0.1524" layer="21"/>
<wire x1="5.207" y1="2.159" x2="-5.207" y2="2.159" width="0.1524" layer="21"/>
<wire x1="5.207" y1="-2.159" x2="5.334" y2="-2.286" width="0.1524" layer="21"/>
<wire x1="5.207" y1="-2.159" x2="-5.207" y2="-2.159" width="0.1524" layer="21"/>
<wire x1="6.223" y1="2.286" x2="5.334" y2="2.286" width="0.1524" layer="21"/>
<wire x1="6.223" y1="-2.286" x2="5.334" y2="-2.286" width="0.1524" layer="21"/>
<wire x1="6.477" y1="-0.635" x2="6.477" y2="-2.032" width="0.1524" layer="21"/>
<wire x1="6.477" y1="-0.635" x2="6.477" y2="0.635" width="0.1524" layer="51"/>
<wire x1="6.477" y1="2.032" x2="6.477" y2="0.635" width="0.1524" layer="21"/>
<wire x1="-6.477" y1="-2.032" x2="-6.477" y2="-0.635" width="0.1524" layer="21"/>
<wire x1="-6.477" y1="0.635" x2="-6.477" y2="-0.635" width="0.1524" layer="51"/>
<wire x1="-6.477" y1="0.635" x2="-6.477" y2="2.032" width="0.1524" layer="21"/>
<pad name="1" x="-7.62" y="0" drill="1.016" shape="octagon"/>
<pad name="2" x="7.62" y="0" drill="1.016" shape="octagon"/>
<text x="-6.477" y="2.6924" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-4.318" y="-0.7112" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="-7.0358" y1="-0.4064" x2="-6.477" y2="0.4064" layer="51"/>
<rectangle x1="6.477" y1="-0.4064" x2="7.0358" y2="0.4064" layer="51"/>
</package>
<package name="P0817/22" urn="urn:adsk.eagle:footprint:25669/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0817, grid 22.5 mm</description>
<wire x1="-10.414" y1="0" x2="-11.43" y2="0" width="0.8128" layer="51"/>
<wire x1="-8.509" y1="-3.429" x2="-8.509" y2="3.429" width="0.1524" layer="21"/>
<wire x1="-8.128" y1="3.81" x2="-7.239" y2="3.81" width="0.1524" layer="21"/>
<wire x1="-6.985" y1="3.556" x2="-7.239" y2="3.81" width="0.1524" layer="21"/>
<wire x1="-8.128" y1="-3.81" x2="-7.239" y2="-3.81" width="0.1524" layer="21"/>
<wire x1="-6.985" y1="-3.556" x2="-7.239" y2="-3.81" width="0.1524" layer="21"/>
<wire x1="6.985" y1="3.556" x2="7.239" y2="3.81" width="0.1524" layer="21"/>
<wire x1="6.985" y1="3.556" x2="-6.985" y2="3.556" width="0.1524" layer="21"/>
<wire x1="6.985" y1="-3.556" x2="7.239" y2="-3.81" width="0.1524" layer="21"/>
<wire x1="6.985" y1="-3.556" x2="-6.985" y2="-3.556" width="0.1524" layer="21"/>
<wire x1="8.128" y1="3.81" x2="7.239" y2="3.81" width="0.1524" layer="21"/>
<wire x1="8.128" y1="-3.81" x2="7.239" y2="-3.81" width="0.1524" layer="21"/>
<wire x1="8.509" y1="-3.429" x2="8.509" y2="3.429" width="0.1524" layer="21"/>
<wire x1="11.43" y1="0" x2="10.414" y2="0" width="0.8128" layer="51"/>
<wire x1="-8.509" y1="3.429" x2="-8.128" y2="3.81" width="0.1524" layer="21" curve="-90"/>
<wire x1="-8.509" y1="-3.429" x2="-8.128" y2="-3.81" width="0.1524" layer="21" curve="90"/>
<wire x1="8.128" y1="3.81" x2="8.509" y2="3.429" width="0.1524" layer="21" curve="-90"/>
<wire x1="8.128" y1="-3.81" x2="8.509" y2="-3.429" width="0.1524" layer="21" curve="90"/>
<pad name="1" x="-11.43" y="0" drill="1.016" shape="octagon"/>
<pad name="2" x="11.43" y="0" drill="1.016" shape="octagon"/>
<text x="-8.382" y="4.2164" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-6.223" y="-0.5842" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<text x="6.604" y="-2.2606" size="1.27" layer="51" ratio="10" rot="R90">0817</text>
<rectangle x1="8.509" y1="-0.4064" x2="10.3124" y2="0.4064" layer="21"/>
<rectangle x1="-10.3124" y1="-0.4064" x2="-8.509" y2="0.4064" layer="21"/>
</package>
<package name="P0817V" urn="urn:adsk.eagle:footprint:25670/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0817, grid 6.35 mm</description>
<wire x1="-3.81" y1="0" x2="-5.08" y2="0" width="0.8128" layer="51"/>
<wire x1="1.27" y1="0" x2="0" y2="0" width="0.8128" layer="51"/>
<circle x="-5.08" y="0" radius="3.81" width="0.1524" layer="21"/>
<circle x="-5.08" y="0" radius="1.27" width="0.1524" layer="51"/>
<pad name="1" x="-5.08" y="0" drill="1.016" shape="octagon"/>
<pad name="2" x="1.27" y="0" drill="1.016" shape="octagon"/>
<text x="-1.016" y="1.27" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-1.016" y="-2.54" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<text x="-6.858" y="2.032" size="1.016" layer="21" ratio="12">0817</text>
<rectangle x1="-3.81" y1="-0.4064" x2="0" y2="0.4064" layer="21"/>
</package>
<package name="V234/12" urn="urn:adsk.eagle:footprint:25671/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type V234, grid 12.5 mm</description>
<wire x1="-4.953" y1="1.524" x2="-4.699" y2="1.778" width="0.1524" layer="21" curve="-90"/>
<wire x1="4.699" y1="1.778" x2="4.953" y2="1.524" width="0.1524" layer="21" curve="-90"/>
<wire x1="4.699" y1="-1.778" x2="4.953" y2="-1.524" width="0.1524" layer="21" curve="90"/>
<wire x1="-4.953" y1="-1.524" x2="-4.699" y2="-1.778" width="0.1524" layer="21" curve="90"/>
<wire x1="-4.699" y1="1.778" x2="4.699" y2="1.778" width="0.1524" layer="21"/>
<wire x1="-4.953" y1="1.524" x2="-4.953" y2="-1.524" width="0.1524" layer="21"/>
<wire x1="4.699" y1="-1.778" x2="-4.699" y2="-1.778" width="0.1524" layer="21"/>
<wire x1="4.953" y1="1.524" x2="4.953" y2="-1.524" width="0.1524" layer="21"/>
<wire x1="6.35" y1="0" x2="5.461" y2="0" width="0.8128" layer="51"/>
<wire x1="-6.35" y1="0" x2="-5.461" y2="0" width="0.8128" layer="51"/>
<pad name="1" x="-6.35" y="0" drill="1.016" shape="octagon"/>
<pad name="2" x="6.35" y="0" drill="1.016" shape="octagon"/>
<text x="-4.953" y="2.159" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-3.81" y="-0.635" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="4.953" y1="-0.4064" x2="5.4102" y2="0.4064" layer="21"/>
<rectangle x1="-5.4102" y1="-0.4064" x2="-4.953" y2="0.4064" layer="21"/>
</package>
<package name="V235/17" urn="urn:adsk.eagle:footprint:25672/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type V235, grid 17.78 mm</description>
<wire x1="-6.731" y1="2.921" x2="6.731" y2="2.921" width="0.1524" layer="21"/>
<wire x1="-7.112" y1="2.54" x2="-7.112" y2="-2.54" width="0.1524" layer="21"/>
<wire x1="6.731" y1="-2.921" x2="-6.731" y2="-2.921" width="0.1524" layer="21"/>
<wire x1="7.112" y1="2.54" x2="7.112" y2="-2.54" width="0.1524" layer="21"/>
<wire x1="8.89" y1="0" x2="7.874" y2="0" width="1.016" layer="51"/>
<wire x1="-7.874" y1="0" x2="-8.89" y2="0" width="1.016" layer="51"/>
<wire x1="-7.112" y1="-2.54" x2="-6.731" y2="-2.921" width="0.1524" layer="21" curve="90"/>
<wire x1="6.731" y1="2.921" x2="7.112" y2="2.54" width="0.1524" layer="21" curve="-90"/>
<wire x1="6.731" y1="-2.921" x2="7.112" y2="-2.54" width="0.1524" layer="21" curve="90"/>
<wire x1="-7.112" y1="2.54" x2="-6.731" y2="2.921" width="0.1524" layer="21" curve="-90"/>
<pad name="1" x="-8.89" y="0" drill="1.1938" shape="octagon"/>
<pad name="2" x="8.89" y="0" drill="1.1938" shape="octagon"/>
<text x="-6.858" y="3.302" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-5.842" y="-0.635" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="7.112" y1="-0.508" x2="7.747" y2="0.508" layer="21"/>
<rectangle x1="-7.747" y1="-0.508" x2="-7.112" y2="0.508" layer="21"/>
</package>
<package name="V526-0" urn="urn:adsk.eagle:footprint:25673/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type V526-0, grid 2.5 mm</description>
<wire x1="-2.54" y1="1.016" x2="-2.286" y2="1.27" width="0.1524" layer="21" curve="-90"/>
<wire x1="2.286" y1="1.27" x2="2.54" y2="1.016" width="0.1524" layer="21" curve="-90"/>
<wire x1="2.286" y1="-1.27" x2="2.54" y2="-1.016" width="0.1524" layer="21" curve="90"/>
<wire x1="-2.54" y1="-1.016" x2="-2.286" y2="-1.27" width="0.1524" layer="21" curve="90"/>
<wire x1="2.286" y1="1.27" x2="-2.286" y2="1.27" width="0.1524" layer="21"/>
<wire x1="2.54" y1="-1.016" x2="2.54" y2="1.016" width="0.1524" layer="21"/>
<wire x1="-2.286" y1="-1.27" x2="2.286" y2="-1.27" width="0.1524" layer="21"/>
<wire x1="-2.54" y1="1.016" x2="-2.54" y2="-1.016" width="0.1524" layer="21"/>
<pad name="1" x="-1.27" y="0" drill="0.8128" shape="octagon"/>
<pad name="2" x="1.27" y="0" drill="0.8128" shape="octagon"/>
<text x="-2.413" y="1.651" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-2.413" y="-2.794" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
</package>
<package name="MINI_MELF-0102AX" urn="urn:adsk.eagle:footprint:25682/1" library_version="1">
<description>&lt;b&gt;Mini MELF 0102 Axial&lt;/b&gt;</description>
<circle x="0" y="0" radius="0.6" width="0" layer="51"/>
<circle x="0" y="0" radius="0.6" width="0" layer="52"/>
<smd name="1" x="0" y="0" dx="1.9" dy="1.9" layer="1" roundness="100"/>
<smd name="2" x="0" y="0" dx="1.9" dy="1.9" layer="16" roundness="100"/>
<text x="-1.27" y="0.9525" size="1.27" layer="25">&gt;NAME</text>
<text x="-1.27" y="-2.2225" size="1.27" layer="27">&gt;VALUE</text>
<hole x="0" y="0" drill="1.3"/>
</package>
<package name="0922V" urn="urn:adsk.eagle:footprint:25680/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0922, grid 7.5 mm</description>
<wire x1="2.54" y1="0" x2="1.397" y2="0" width="0.8128" layer="51"/>
<wire x1="-5.08" y1="0" x2="-3.81" y2="0" width="0.8128" layer="51"/>
<circle x="-5.08" y="0" radius="4.572" width="0.1524" layer="21"/>
<circle x="-5.08" y="0" radius="1.905" width="0.1524" layer="21"/>
<pad name="1" x="-5.08" y="0" drill="1.016" shape="octagon"/>
<pad name="2" x="2.54" y="0" drill="1.016" shape="octagon"/>
<text x="-0.508" y="1.6764" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-0.508" y="-2.9972" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<text x="-6.858" y="2.54" size="1.016" layer="21" ratio="12">0922</text>
<rectangle x1="-3.81" y1="-0.4064" x2="1.3208" y2="0.4064" layer="21"/>
</package>
<package name="MINI_MELF-0102R" urn="urn:adsk.eagle:footprint:25674/1" library_version="1">
<description>&lt;b&gt;CECC Size RC2211&lt;/b&gt; Reflow Soldering&lt;p&gt;
source Beyschlag</description>
<wire x1="-1" y1="-0.5" x2="1" y2="-0.5" width="0.2032" layer="51"/>
<wire x1="1" y1="-0.5" x2="1" y2="0.5" width="0.2032" layer="51"/>
<wire x1="1" y1="0.5" x2="-1" y2="0.5" width="0.2032" layer="51"/>
<wire x1="-1" y1="0.5" x2="-1" y2="-0.5" width="0.2032" layer="51"/>
<smd name="1" x="-0.9" y="0" dx="0.5" dy="1.3" layer="1"/>
<smd name="2" x="0.9" y="0" dx="0.5" dy="1.3" layer="1"/>
<text x="-1.27" y="0.9525" size="1.27" layer="25">&gt;NAME</text>
<text x="-1.27" y="-2.2225" size="1.27" layer="27">&gt;VALUE</text>
</package>
<package name="MINI_MELF-0102W" urn="urn:adsk.eagle:footprint:25675/1" library_version="1">
<description>&lt;b&gt;CECC Size RC2211&lt;/b&gt; Wave Soldering&lt;p&gt;
source Beyschlag</description>
<wire x1="-1" y1="-0.5" x2="1" y2="-0.5" width="0.2032" layer="51"/>
<wire x1="1" y1="-0.5" x2="1" y2="0.5" width="0.2032" layer="51"/>
<wire x1="1" y1="0.5" x2="-1" y2="0.5" width="0.2032" layer="51"/>
<wire x1="-1" y1="0.5" x2="-1" y2="-0.5" width="0.2032" layer="51"/>
<smd name="1" x="-0.95" y="0" dx="0.6" dy="1.3" layer="1"/>
<smd name="2" x="0.95" y="0" dx="0.6" dy="1.3" layer="1"/>
<text x="-1.27" y="0.9525" size="1.27" layer="25">&gt;NAME</text>
<text x="-1.27" y="-2.2225" size="1.27" layer="27">&gt;VALUE</text>
</package>
<package name="MINI_MELF-0204R" urn="urn:adsk.eagle:footprint:25676/1" library_version="1">
<description>&lt;b&gt;CECC Size RC3715&lt;/b&gt; Reflow Soldering&lt;p&gt;
source Beyschlag</description>
<wire x1="-1.7" y1="-0.6" x2="1.7" y2="-0.6" width="0.2032" layer="51"/>
<wire x1="1.7" y1="-0.6" x2="1.7" y2="0.6" width="0.2032" layer="51"/>
<wire x1="1.7" y1="0.6" x2="-1.7" y2="0.6" width="0.2032" layer="51"/>
<wire x1="-1.7" y1="0.6" x2="-1.7" y2="-0.6" width="0.2032" layer="51"/>
<wire x1="0.938" y1="0.6" x2="-0.938" y2="0.6" width="0.2032" layer="21"/>
<wire x1="-0.938" y1="-0.6" x2="0.938" y2="-0.6" width="0.2032" layer="21"/>
<smd name="1" x="-1.5" y="0" dx="0.8" dy="1.6" layer="1"/>
<smd name="2" x="1.5" y="0" dx="0.8" dy="1.6" layer="1"/>
<text x="-1.27" y="0.9525" size="1.27" layer="25">&gt;NAME</text>
<text x="-1.27" y="-2.2225" size="1.27" layer="27">&gt;VALUE</text>
</package>
<package name="MINI_MELF-0204W" urn="urn:adsk.eagle:footprint:25677/1" library_version="1">
<description>&lt;b&gt;CECC Size RC3715&lt;/b&gt; Wave Soldering&lt;p&gt;
source Beyschlag</description>
<wire x1="-1.7" y1="-0.6" x2="1.7" y2="-0.6" width="0.2032" layer="51"/>
<wire x1="1.7" y1="-0.6" x2="1.7" y2="0.6" width="0.2032" layer="51"/>
<wire x1="1.7" y1="0.6" x2="-1.7" y2="0.6" width="0.2032" layer="51"/>
<wire x1="-1.7" y1="0.6" x2="-1.7" y2="-0.6" width="0.2032" layer="51"/>
<wire x1="0.684" y1="0.6" x2="-0.684" y2="0.6" width="0.2032" layer="21"/>
<wire x1="-0.684" y1="-0.6" x2="0.684" y2="-0.6" width="0.2032" layer="21"/>
<smd name="1" x="-1.5" y="0" dx="1.2" dy="1.6" layer="1"/>
<smd name="2" x="1.5" y="0" dx="1.2" dy="1.6" layer="1"/>
<text x="-1.27" y="0.9525" size="1.27" layer="25">&gt;NAME</text>
<text x="-1.27" y="-2.2225" size="1.27" layer="27">&gt;VALUE</text>
</package>
<package name="MINI_MELF-0207R" urn="urn:adsk.eagle:footprint:25678/1" library_version="1">
<description>&lt;b&gt;CECC Size RC6123&lt;/b&gt; Reflow Soldering&lt;p&gt;
source Beyschlag</description>
<wire x1="-2.8" y1="-1" x2="2.8" y2="-1" width="0.2032" layer="51"/>
<wire x1="2.8" y1="-1" x2="2.8" y2="1" width="0.2032" layer="51"/>
<wire x1="2.8" y1="1" x2="-2.8" y2="1" width="0.2032" layer="51"/>
<wire x1="-2.8" y1="1" x2="-2.8" y2="-1" width="0.2032" layer="51"/>
<wire x1="1.2125" y1="1" x2="-1.2125" y2="1" width="0.2032" layer="21"/>
<wire x1="-1.2125" y1="-1" x2="1.2125" y2="-1" width="0.2032" layer="21"/>
<smd name="1" x="-2.25" y="0" dx="1.6" dy="2.5" layer="1"/>
<smd name="2" x="2.25" y="0" dx="1.6" dy="2.5" layer="1"/>
<text x="-2.2225" y="1.5875" size="1.27" layer="25">&gt;NAME</text>
<text x="-2.2225" y="-2.54" size="1.27" layer="27">&gt;VALUE</text>
</package>
<package name="MINI_MELF-0207W" urn="urn:adsk.eagle:footprint:25679/1" library_version="1">
<description>&lt;b&gt;CECC Size RC6123&lt;/b&gt; Wave Soldering&lt;p&gt;
source Beyschlag</description>
<wire x1="-2.8" y1="-1" x2="2.8" y2="-1" width="0.2032" layer="51"/>
<wire x1="2.8" y1="-1" x2="2.8" y2="1" width="0.2032" layer="51"/>
<wire x1="2.8" y1="1" x2="-2.8" y2="1" width="0.2032" layer="51"/>
<wire x1="-2.8" y1="1" x2="-2.8" y2="-1" width="0.2032" layer="51"/>
<wire x1="1.149" y1="1" x2="-1.149" y2="1" width="0.2032" layer="21"/>
<wire x1="-1.149" y1="-1" x2="1.149" y2="-1" width="0.2032" layer="21"/>
<smd name="1" x="-2.6" y="0" dx="2.4" dy="2.5" layer="1"/>
<smd name="2" x="2.6" y="0" dx="2.4" dy="2.5" layer="1"/>
<text x="-2.54" y="1.5875" size="1.27" layer="25">&gt;NAME</text>
<text x="-2.54" y="-2.54" size="1.27" layer="27">&gt;VALUE</text>
</package>
<package name="RDH/15" urn="urn:adsk.eagle:footprint:25681/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type RDH, grid 15 mm</description>
<wire x1="-7.62" y1="0" x2="-6.858" y2="0" width="0.8128" layer="51"/>
<wire x1="-6.096" y1="3.048" x2="-5.207" y2="3.048" width="0.1524" layer="21"/>
<wire x1="-4.953" y1="2.794" x2="-5.207" y2="3.048" width="0.1524" layer="21"/>
<wire x1="-6.096" y1="-3.048" x2="-5.207" y2="-3.048" width="0.1524" layer="21"/>
<wire x1="-4.953" y1="-2.794" x2="-5.207" y2="-3.048" width="0.1524" layer="21"/>
<wire x1="4.953" y1="2.794" x2="5.207" y2="3.048" width="0.1524" layer="21"/>
<wire x1="4.953" y1="2.794" x2="-4.953" y2="2.794" width="0.1524" layer="21"/>
<wire x1="4.953" y1="-2.794" x2="5.207" y2="-3.048" width="0.1524" layer="21"/>
<wire x1="4.953" y1="-2.794" x2="-4.953" y2="-2.794" width="0.1524" layer="21"/>
<wire x1="6.096" y1="3.048" x2="5.207" y2="3.048" width="0.1524" layer="21"/>
<wire x1="6.096" y1="-3.048" x2="5.207" y2="-3.048" width="0.1524" layer="21"/>
<wire x1="-6.477" y1="-2.667" x2="-6.477" y2="-1.016" width="0.1524" layer="21"/>
<wire x1="-6.477" y1="1.016" x2="-6.477" y2="-1.016" width="0.1524" layer="51"/>
<wire x1="-6.477" y1="1.016" x2="-6.477" y2="2.667" width="0.1524" layer="21"/>
<wire x1="6.477" y1="-2.667" x2="6.477" y2="-1.016" width="0.1524" layer="21"/>
<wire x1="6.477" y1="1.016" x2="6.477" y2="-1.016" width="0.1524" layer="51"/>
<wire x1="6.477" y1="1.016" x2="6.477" y2="2.667" width="0.1524" layer="21"/>
<wire x1="6.858" y1="0" x2="7.62" y2="0" width="0.8128" layer="51"/>
<wire x1="-6.477" y1="2.667" x2="-6.096" y2="3.048" width="0.1524" layer="21" curve="-90"/>
<wire x1="6.096" y1="3.048" x2="6.477" y2="2.667" width="0.1524" layer="21" curve="-90"/>
<wire x1="-6.477" y1="-2.667" x2="-6.096" y2="-3.048" width="0.1524" layer="21" curve="90"/>
<wire x1="6.096" y1="-3.048" x2="6.477" y2="-2.667" width="0.1524" layer="21" curve="90"/>
<pad name="1" x="-7.62" y="0" drill="1.016" shape="octagon"/>
<pad name="2" x="7.62" y="0" drill="1.016" shape="octagon"/>
<text x="-6.35" y="3.4544" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-4.318" y="-0.5842" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<text x="4.572" y="-1.7272" size="1.27" layer="51" ratio="10" rot="R90">RDH</text>
<rectangle x1="-6.7564" y1="-0.4064" x2="-6.4516" y2="0.4064" layer="51"/>
<rectangle x1="6.4516" y1="-0.4064" x2="6.7564" y2="0.4064" layer="51"/>
</package>
<package name="0204V" urn="urn:adsk.eagle:footprint:25508/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0204, grid 2.5 mm</description>
<wire x1="-1.27" y1="0" x2="1.27" y2="0" width="0.508" layer="51"/>
<wire x1="-0.127" y1="0" x2="0.127" y2="0" width="0.508" layer="21"/>
<circle x="-1.27" y="0" radius="0.889" width="0.1524" layer="51"/>
<circle x="-1.27" y="0" radius="0.635" width="0.0508" layer="51"/>
<pad name="1" x="-1.27" y="0" drill="0.8128" shape="octagon"/>
<pad name="2" x="1.27" y="0" drill="0.8128" shape="octagon"/>
<text x="-2.1336" y="1.1684" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-2.1336" y="-2.3114" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
</package>
<package name="0309V" urn="urn:adsk.eagle:footprint:25657/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
type 0309, grid 2.5 mm</description>
<wire x1="1.27" y1="0" x2="0.635" y2="0" width="0.6096" layer="51"/>
<wire x1="-0.635" y1="0" x2="-1.27" y2="0" width="0.6096" layer="51"/>
<circle x="-1.27" y="0" radius="1.524" width="0.1524" layer="21"/>
<circle x="-1.27" y="0" radius="0.762" width="0.1524" layer="51"/>
<pad name="1" x="-1.27" y="0" drill="0.8128" shape="octagon"/>
<pad name="2" x="1.27" y="0" drill="0.8128" shape="octagon"/>
<text x="0.254" y="1.016" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="0.254" y="-2.2098" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="0.254" y1="-0.3048" x2="0.5588" y2="0.3048" layer="51"/>
<rectangle x1="-0.635" y1="-0.3048" x2="-0.3302" y2="0.3048" layer="51"/>
<rectangle x1="-0.3302" y1="-0.3048" x2="0.254" y2="0.3048" layer="21"/>
</package>
<package name="R0201" urn="urn:adsk.eagle:footprint:25683/1" library_version="1">
<description>&lt;b&gt;RESISTOR&lt;/b&gt; chip&lt;p&gt;
Source: http://www.vishay.com/docs/20008/dcrcw.pdf</description>
<smd name="1" x="-0.255" y="0" dx="0.28" dy="0.43" layer="1"/>
<smd name="2" x="0.255" y="0" dx="0.28" dy="0.43" layer="1"/>
<text x="-0.635" y="0.635" size="1.27" layer="25">&gt;NAME</text>
<text x="-0.635" y="-1.905" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-0.3" y1="-0.15" x2="-0.15" y2="0.15" layer="51"/>
<rectangle x1="0.15" y1="-0.15" x2="0.3" y2="0.15" layer="51"/>
<rectangle x1="-0.15" y1="-0.15" x2="0.15" y2="0.15" layer="21"/>
</package>
<package name="VMTA55" urn="urn:adsk.eagle:footprint:25689/1" library_version="1">
<description>&lt;b&gt;Bulk Metal® Foil Technology&lt;/b&gt;, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements&lt;p&gt;
MIL SIZE RNC55&lt;br&gt;
Source: VISHAY .. vta56.pdf</description>
<wire x1="-5.08" y1="0" x2="-4.26" y2="0" width="0.6096" layer="51"/>
<wire x1="3.3375" y1="-1.45" x2="3.3375" y2="1.45" width="0.1524" layer="21"/>
<wire x1="3.3375" y1="1.45" x2="-3.3625" y2="1.45" width="0.1524" layer="21"/>
<wire x1="-3.3625" y1="1.45" x2="-3.3625" y2="-1.45" width="0.1524" layer="21"/>
<wire x1="-3.3625" y1="-1.45" x2="3.3375" y2="-1.45" width="0.1524" layer="21"/>
<wire x1="4.235" y1="0" x2="5.08" y2="0" width="0.6096" layer="51"/>
<pad name="1" x="-5.08" y="0" drill="1.1" shape="octagon"/>
<pad name="2" x="5.08" y="0" drill="1.1" shape="octagon"/>
<text x="-3.175" y="1.905" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-3.175" y="-0.635" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="-4.26" y1="-0.3048" x2="-3.3075" y2="0.3048" layer="21"/>
<rectangle x1="3.2825" y1="-0.3048" x2="4.235" y2="0.3048" layer="21"/>
</package>
<package name="VMTB60" urn="urn:adsk.eagle:footprint:25690/1" library_version="1">
<description>&lt;b&gt;Bulk Metal® Foil Technology&lt;/b&gt;, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements&lt;p&gt;
MIL SIZE RNC60&lt;br&gt;
Source: VISHAY .. vta56.pdf</description>
<wire x1="-6.35" y1="0" x2="-5.585" y2="0" width="0.6096" layer="51"/>
<wire x1="4.6875" y1="-1.95" x2="4.6875" y2="1.95" width="0.1524" layer="21"/>
<wire x1="4.6875" y1="1.95" x2="-4.6875" y2="1.95" width="0.1524" layer="21"/>
<wire x1="-4.6875" y1="1.95" x2="-4.6875" y2="-1.95" width="0.1524" layer="21"/>
<wire x1="-4.6875" y1="-1.95" x2="4.6875" y2="-1.95" width="0.1524" layer="21"/>
<wire x1="5.585" y1="0" x2="6.35" y2="0" width="0.6096" layer="51"/>
<pad name="1" x="-6.35" y="0" drill="1.1" shape="octagon"/>
<pad name="2" x="6.35" y="0" drill="1.1" shape="octagon"/>
<text x="-4.445" y="2.54" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-4.445" y="-0.635" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="-5.585" y1="-0.3048" x2="-4.6325" y2="0.3048" layer="21"/>
<rectangle x1="4.6325" y1="-0.3048" x2="5.585" y2="0.3048" layer="21"/>
</package>
<package name="VTA52" urn="urn:adsk.eagle:footprint:25684/1" library_version="1">
<description>&lt;b&gt;Bulk Metal® Foil Technology&lt;/b&gt;, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements&lt;p&gt;
MIL SIZE RBR52&lt;br&gt;
Source: VISHAY .. vta56.pdf</description>
<wire x1="-15.24" y1="0" x2="-13.97" y2="0" width="0.6096" layer="51"/>
<wire x1="12.6225" y1="0.025" x2="12.6225" y2="4.725" width="0.1524" layer="21"/>
<wire x1="12.6225" y1="4.725" x2="-12.6225" y2="4.725" width="0.1524" layer="21"/>
<wire x1="-12.6225" y1="4.725" x2="-12.6225" y2="0.025" width="0.1524" layer="21"/>
<wire x1="-12.6225" y1="0.025" x2="-12.6225" y2="-4.65" width="0.1524" layer="21"/>
<wire x1="-12.6225" y1="-4.65" x2="12.6225" y2="-4.65" width="0.1524" layer="21"/>
<wire x1="12.6225" y1="-4.65" x2="12.6225" y2="0.025" width="0.1524" layer="21"/>
<wire x1="13.97" y1="0" x2="15.24" y2="0" width="0.6096" layer="51"/>
<pad name="1" x="-15.24" y="0" drill="1.1" shape="octagon"/>
<pad name="2" x="15.24" y="0" drill="1.1" shape="octagon"/>
<text x="-3.81" y="5.08" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-3.175" y="-0.635" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="-13.97" y1="-0.3048" x2="-12.5675" y2="0.3048" layer="21"/>
<rectangle x1="12.5675" y1="-0.3048" x2="13.97" y2="0.3048" layer="21"/>
</package>
<package name="VTA53" urn="urn:adsk.eagle:footprint:25685/1" library_version="1">
<description>&lt;b&gt;Bulk Metal® Foil Technology&lt;/b&gt;, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements&lt;p&gt;
MIL SIZE RBR53&lt;br&gt;
Source: VISHAY .. vta56.pdf</description>
<wire x1="-12.065" y1="0" x2="-10.795" y2="0" width="0.6096" layer="51"/>
<wire x1="9.8975" y1="0" x2="9.8975" y2="4.7" width="0.1524" layer="21"/>
<wire x1="9.8975" y1="4.7" x2="-9.8975" y2="4.7" width="0.1524" layer="21"/>
<wire x1="-9.8975" y1="4.7" x2="-9.8975" y2="0" width="0.1524" layer="21"/>
<wire x1="-9.8975" y1="0" x2="-9.8975" y2="-4.675" width="0.1524" layer="21"/>
<wire x1="-9.8975" y1="-4.675" x2="9.8975" y2="-4.675" width="0.1524" layer="21"/>
<wire x1="9.8975" y1="-4.675" x2="9.8975" y2="0" width="0.1524" layer="21"/>
<wire x1="10.795" y1="0" x2="12.065" y2="0" width="0.6096" layer="51"/>
<pad name="1" x="-12.065" y="0" drill="1.1" shape="octagon"/>
<pad name="2" x="12.065" y="0" drill="1.1" shape="octagon"/>
<text x="-3.81" y="5.08" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-3.175" y="-0.635" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="-10.795" y1="-0.3048" x2="-9.8425" y2="0.3048" layer="21"/>
<rectangle x1="9.8425" y1="-0.3048" x2="10.795" y2="0.3048" layer="21"/>
</package>
<package name="VTA54" urn="urn:adsk.eagle:footprint:25686/1" library_version="1">
<description>&lt;b&gt;Bulk Metal® Foil Technology&lt;/b&gt;, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements&lt;p&gt;
MIL SIZE RBR54&lt;br&gt;
Source: VISHAY .. vta56.pdf</description>
<wire x1="-12.065" y1="0" x2="-10.795" y2="0" width="0.6096" layer="51"/>
<wire x1="9.8975" y1="0" x2="9.8975" y2="3.3" width="0.1524" layer="21"/>
<wire x1="9.8975" y1="3.3" x2="-9.8975" y2="3.3" width="0.1524" layer="21"/>
<wire x1="-9.8975" y1="3.3" x2="-9.8975" y2="0" width="0.1524" layer="21"/>
<wire x1="-9.8975" y1="0" x2="-9.8975" y2="-3.3" width="0.1524" layer="21"/>
<wire x1="-9.8975" y1="-3.3" x2="9.8975" y2="-3.3" width="0.1524" layer="21"/>
<wire x1="9.8975" y1="-3.3" x2="9.8975" y2="0" width="0.1524" layer="21"/>
<wire x1="10.795" y1="0" x2="12.065" y2="0" width="0.6096" layer="51"/>
<pad name="1" x="-12.065" y="0" drill="1.1" shape="octagon"/>
<pad name="2" x="12.065" y="0" drill="1.1" shape="octagon"/>
<text x="-3.81" y="3.81" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-3.175" y="-0.635" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="-10.795" y1="-0.3048" x2="-9.8425" y2="0.3048" layer="21"/>
<rectangle x1="9.8425" y1="-0.3048" x2="10.795" y2="0.3048" layer="21"/>
</package>
<package name="VTA55" urn="urn:adsk.eagle:footprint:25687/1" library_version="1">
<description>&lt;b&gt;Bulk Metal® Foil Technology&lt;/b&gt;, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements&lt;p&gt;
MIL SIZE RBR55&lt;br&gt;
Source: VISHAY .. vta56.pdf</description>
<wire x1="-8.255" y1="0" x2="-6.985" y2="0" width="0.6096" layer="51"/>
<wire x1="6.405" y1="0" x2="6.405" y2="3.3" width="0.1524" layer="21"/>
<wire x1="6.405" y1="3.3" x2="-6.405" y2="3.3" width="0.1524" layer="21"/>
<wire x1="-6.405" y1="3.3" x2="-6.405" y2="0" width="0.1524" layer="21"/>
<wire x1="-6.405" y1="0" x2="-6.405" y2="-3.3" width="0.1524" layer="21"/>
<wire x1="-6.405" y1="-3.3" x2="6.405" y2="-3.3" width="0.1524" layer="21"/>
<wire x1="6.405" y1="-3.3" x2="6.405" y2="0" width="0.1524" layer="21"/>
<wire x1="6.985" y1="0" x2="8.255" y2="0" width="0.6096" layer="51"/>
<pad name="1" x="-8.255" y="0" drill="1.1" shape="octagon"/>
<pad name="2" x="8.255" y="0" drill="1.1" shape="octagon"/>
<text x="-3.81" y="3.81" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-3.175" y="-0.635" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="-6.985" y1="-0.3048" x2="-6.35" y2="0.3048" layer="21"/>
<rectangle x1="6.35" y1="-0.3048" x2="6.985" y2="0.3048" layer="21"/>
</package>
<package name="VTA56" urn="urn:adsk.eagle:footprint:25688/1" library_version="1">
<description>&lt;b&gt;Bulk Metal® Foil Technology&lt;/b&gt;, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements&lt;p&gt;
MIL SIZE RBR56&lt;br&gt;
Source: VISHAY .. vta56.pdf</description>
<wire x1="-6.35" y1="0" x2="-5.08" y2="0" width="0.6096" layer="51"/>
<wire x1="4.5" y1="0" x2="4.5" y2="3.3" width="0.1524" layer="21"/>
<wire x1="4.5" y1="3.3" x2="-4.5" y2="3.3" width="0.1524" layer="21"/>
<wire x1="-4.5" y1="3.3" x2="-4.5" y2="0" width="0.1524" layer="21"/>
<wire x1="-4.5" y1="0" x2="-4.5" y2="-3.3" width="0.1524" layer="21"/>
<wire x1="-4.5" y1="-3.3" x2="4.5" y2="-3.3" width="0.1524" layer="21"/>
<wire x1="4.5" y1="-3.3" x2="4.5" y2="0" width="0.1524" layer="21"/>
<wire x1="5.08" y1="0" x2="6.35" y2="0" width="0.6096" layer="51"/>
<pad name="1" x="-6.35" y="0" drill="1.1" shape="octagon"/>
<pad name="2" x="6.35" y="0" drill="1.1" shape="octagon"/>
<text x="-3.81" y="3.81" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="-3.175" y="-0.635" size="1.27" layer="27" ratio="10">&gt;VALUE</text>
<rectangle x1="-5.08" y1="-0.3048" x2="-4.445" y2="0.3048" layer="21"/>
<rectangle x1="4.445" y1="-0.3048" x2="5.08" y2="0.3048" layer="21"/>
</package>
<package name="R4527" urn="urn:adsk.eagle:footprint:25691/1" library_version="1">
<description>&lt;b&gt;Package 4527&lt;/b&gt;&lt;p&gt;
Source: http://www.vishay.com/docs/31059/wsrhigh.pdf</description>
<wire x1="-5.675" y1="-3.375" x2="5.65" y2="-3.375" width="0.2032" layer="21"/>
<wire x1="5.65" y1="-3.375" x2="5.65" y2="3.375" width="0.2032" layer="51"/>
<wire x1="5.65" y1="3.375" x2="-5.675" y2="3.375" width="0.2032" layer="21"/>
<wire x1="-5.675" y1="3.375" x2="-5.675" y2="-3.375" width="0.2032" layer="51"/>
<smd name="1" x="-4.575" y="0" dx="3.94" dy="5.84" layer="1"/>
<smd name="2" x="4.575" y="0" dx="3.94" dy="5.84" layer="1"/>
<text x="-5.715" y="3.81" size="1.27" layer="25">&gt;NAME</text>
<text x="-5.715" y="-5.08" size="1.27" layer="27">&gt;VALUE</text>
</package>
<package name="WSC0001" urn="urn:adsk.eagle:footprint:25692/1" library_version="1">
<description>&lt;b&gt;Wirewound Resistors, Precision Power&lt;/b&gt;&lt;p&gt;
Source: VISHAY wscwsn.pdf</description>
<wire x1="-3.075" y1="1.8" x2="-3.075" y2="-1.8" width="0.2032" layer="51"/>
<wire x1="-3.075" y1="-1.8" x2="3.075" y2="-1.8" width="0.2032" layer="21"/>
<wire x1="3.075" y1="-1.8" x2="3.075" y2="1.8" width="0.2032" layer="51"/>
<wire x1="3.075" y1="1.8" x2="-3.075" y2="1.8" width="0.2032" layer="21"/>
<wire x1="-3.075" y1="1.8" x2="-3.075" y2="1.606" width="0.2032" layer="21"/>
<wire x1="-3.075" y1="-1.606" x2="-3.075" y2="-1.8" width="0.2032" layer="21"/>
<wire x1="3.075" y1="1.606" x2="3.075" y2="1.8" width="0.2032" layer="21"/>
<wire x1="3.075" y1="-1.8" x2="3.075" y2="-1.606" width="0.2032" layer="21"/>
<smd name="1" x="-2.675" y="0" dx="2.29" dy="2.92" layer="1"/>
<smd name="2" x="2.675" y="0" dx="2.29" dy="2.92" layer="1"/>
<text x="-2.544" y="2.229" size="1.27" layer="25">&gt;NAME</text>
<text x="-2.544" y="-3.501" size="1.27" layer="27">&gt;VALUE</text>
</package>
<package name="WSC0002" urn="urn:adsk.eagle:footprint:25693/1" library_version="1">
<description>&lt;b&gt;Wirewound Resistors, Precision Power&lt;/b&gt;&lt;p&gt;
Source: VISHAY wscwsn.pdf</description>
<wire x1="-5.55" y1="3.375" x2="-5.55" y2="-3.375" width="0.2032" layer="51"/>
<wire x1="-5.55" y1="-3.375" x2="5.55" y2="-3.375" width="0.2032" layer="21"/>
<wire x1="5.55" y1="-3.375" x2="5.55" y2="3.375" width="0.2032" layer="51"/>
<wire x1="5.55" y1="3.375" x2="-5.55" y2="3.375" width="0.2032" layer="21"/>
<smd name="1" x="-4.575" y="0.025" dx="3.94" dy="5.84" layer="1"/>
<smd name="2" x="4.575" y="0" dx="3.94" dy="5.84" layer="1"/>
<text x="-5.65" y="3.9" size="1.27" layer="25">&gt;NAME</text>
<text x="-5.65" y="-5.15" size="1.27" layer="27">&gt;VALUE</text>
</package>
<package name="WSC01/2" urn="urn:adsk.eagle:footprint:25694/1" library_version="1">
<description>&lt;b&gt;Wirewound Resistors, Precision Power&lt;/b&gt;&lt;p&gt;
Source: VISHAY wscwsn.pdf</description>
<wire x1="-2.45" y1="1.475" x2="-2.45" y2="-1.475" width="0.2032" layer="51"/>
<wire x1="-2.45" y1="-1.475" x2="2.45" y2="-1.475" width="0.2032" layer="21"/>
<wire x1="2.45" y1="-1.475" x2="2.45" y2="1.475" width="0.2032" layer="51"/>
<wire x1="2.45" y1="1.475" x2="-2.45" y2="1.475" width="0.2032" layer="21"/>
<wire x1="-2.45" y1="1.475" x2="-2.45" y2="1.106" width="0.2032" layer="21"/>
<wire x1="-2.45" y1="-1.106" x2="-2.45" y2="-1.475" width="0.2032" layer="21"/>
<wire x1="2.45" y1="1.106" x2="2.45" y2="1.475" width="0.2032" layer="21"/>
<wire x1="2.45" y1="-1.475" x2="2.45" y2="-1.106" width="0.2032" layer="21"/>
<smd name="1" x="-2.1" y="0" dx="2.16" dy="1.78" layer="1"/>
<smd name="2" x="2.1" y="0" dx="2.16" dy="1.78" layer="1"/>
<text x="-2.544" y="1.904" size="1.27" layer="25">&gt;NAME</text>
<text x="-2.544" y="-3.176" size="1.27" layer="27">&gt;VALUE</text>
</package>
<package name="WSC2515" urn="urn:adsk.eagle:footprint:25695/1" library_version="1">
<description>&lt;b&gt;Wirewound Resistors, Precision Power&lt;/b&gt;&lt;p&gt;
Source: VISHAY wscwsn.pdf</description>
<wire x1="-3.075" y1="1.8" x2="-3.075" y2="-1.8" width="0.2032" layer="51"/>
<wire x1="-3.075" y1="-1.8" x2="3.05" y2="-1.8" width="0.2032" layer="21"/>
<wire x1="3.05" y1="-1.8" x2="3.05" y2="1.8" width="0.2032" layer="51"/>
<wire x1="3.05" y1="1.8" x2="-3.075" y2="1.8" width="0.2032" layer="21"/>
<wire x1="-3.075" y1="1.8" x2="-3.075" y2="1.606" width="0.2032" layer="21"/>
<wire x1="-3.075" y1="-1.606" x2="-3.075" y2="-1.8" width="0.2032" layer="21"/>
<wire x1="3.05" y1="1.606" x2="3.05" y2="1.8" width="0.2032" layer="21"/>
<wire x1="3.05" y1="-1.8" x2="3.05" y2="-1.606" width="0.2032" layer="21"/>
<smd name="1" x="-2.675" y="0" dx="2.29" dy="2.92" layer="1"/>
<smd name="2" x="2.675" y="0" dx="2.29" dy="2.92" layer="1"/>
<text x="-3.2" y="2.15" size="1.27" layer="25">&gt;NAME</text>
<text x="-3.2" y="-3.4" size="1.27" layer="27">&gt;VALUE</text>
</package>
<package name="WSC4527" urn="urn:adsk.eagle:footprint:25696/1" library_version="1">
<description>&lt;b&gt;Wirewound Resistors, Precision Power&lt;/b&gt;&lt;p&gt;
Source: VISHAY wscwsn.pdf</description>
<wire x1="-5.675" y1="3.4" x2="-5.675" y2="-3.375" width="0.2032" layer="51"/>
<wire x1="-5.675" y1="-3.375" x2="5.675" y2="-3.375" width="0.2032" layer="21"/>
<wire x1="5.675" y1="-3.375" x2="5.675" y2="3.4" width="0.2032" layer="51"/>
<wire x1="5.675" y1="3.4" x2="-5.675" y2="3.4" width="0.2032" layer="21"/>
<smd name="1" x="-4.575" y="0.025" dx="3.94" dy="5.84" layer="1"/>
<smd name="2" x="4.575" y="0" dx="3.94" dy="5.84" layer="1"/>
<text x="-5.775" y="3.925" size="1.27" layer="25">&gt;NAME</text>
<text x="-5.775" y="-5.15" size="1.27" layer="27">&gt;VALUE</text>
</package>
<package name="WSC6927" urn="urn:adsk.eagle:footprint:25697/1" library_version="1">
<description>&lt;b&gt;Wirewound Resistors, Precision Power&lt;/b&gt;&lt;p&gt;
Source: VISHAY wscwsn.pdf</description>
<wire x1="-8.65" y1="3.375" x2="-8.65" y2="-3.375" width="0.2032" layer="51"/>
<wire x1="-8.65" y1="-3.375" x2="8.65" y2="-3.375" width="0.2032" layer="21"/>
<wire x1="8.65" y1="-3.375" x2="8.65" y2="3.375" width="0.2032" layer="51"/>
<wire x1="8.65" y1="3.375" x2="-8.65" y2="3.375" width="0.2032" layer="21"/>
<smd name="1" x="-7.95" y="0.025" dx="3.94" dy="5.97" layer="1"/>
<smd name="2" x="7.95" y="0" dx="3.94" dy="5.97" layer="1"/>
<text x="-8.75" y="3.9" size="1.27" layer="25">&gt;NAME</text>
<text x="-8.75" y="-5.15" size="1.27" layer="27">&gt;VALUE</text>
</package>
<package name="R1218" urn="urn:adsk.eagle:footprint:25698/1" library_version="1">
<description>&lt;b&gt;CRCW1218 Thick Film, Rectangular Chip Resistors&lt;/b&gt;&lt;p&gt;
Source: http://www.vishay.com .. dcrcw.pdf</description>
<wire x1="-0.913" y1="-2.219" x2="0.939" y2="-2.219" width="0.1524" layer="51"/>
<wire x1="0.913" y1="2.219" x2="-0.939" y2="2.219" width="0.1524" layer="51"/>
<smd name="1" x="-1.475" y="0" dx="1.05" dy="4.9" layer="1"/>
<smd name="2" x="1.475" y="0" dx="1.05" dy="4.9" layer="1"/>
<text x="-2.54" y="2.54" size="1.27" layer="25">&gt;NAME</text>
<text x="-2.54" y="-3.81" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-1.651" y1="-2.3" x2="-0.9009" y2="2.3" layer="51"/>
<rectangle x1="0.9144" y1="-2.3" x2="1.6645" y2="2.3" layer="51"/>
</package>
<package name="1812X7R" urn="urn:adsk.eagle:footprint:25699/1" library_version="1">
<description>&lt;b&gt;Chip Monolithic Ceramic Capacitors&lt;/b&gt; Medium Voltage High Capacitance for General Use&lt;p&gt;
Source: http://www.murata.com .. GRM43DR72E224KW01.pdf</description>
<wire x1="-1.1" y1="1.5" x2="1.1" y2="1.5" width="0.2032" layer="51"/>
<wire x1="1.1" y1="-1.5" x2="-1.1" y2="-1.5" width="0.2032" layer="51"/>
<wire x1="-0.6" y1="1.5" x2="0.6" y2="1.5" width="0.2032" layer="21"/>
<wire x1="0.6" y1="-1.5" x2="-0.6" y2="-1.5" width="0.2032" layer="21"/>
<smd name="1" x="-1.425" y="0" dx="0.8" dy="3.5" layer="1"/>
<smd name="2" x="1.425" y="0" dx="0.8" dy="3.5" layer="1" rot="R180"/>
<text x="-1.9456" y="1.9958" size="1.27" layer="25">&gt;NAME</text>
<text x="-1.9456" y="-3.7738" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-1.4" y1="-1.6" x2="-1.1" y2="1.6" layer="51"/>
<rectangle x1="1.1" y1="-1.6" x2="1.4" y2="1.6" layer="51" rot="R180"/>
</package>
<package name="R01005" urn="urn:adsk.eagle:footprint:25701/1" library_version="1">
<smd name="1" x="-0.1625" y="0" dx="0.2" dy="0.25" layer="1"/>
<smd name="2" x="0.1625" y="0" dx="0.2" dy="0.25" layer="1"/>
<text x="-0.4" y="0.3" size="1.27" layer="25">&gt;NAME</text>
<text x="-0.4" y="-1.6" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="-0.2" y1="-0.1" x2="-0.075" y2="0.1" layer="51"/>
<rectangle x1="0.075" y1="-0.1" x2="0.2" y2="0.1" layer="51"/>
<rectangle x1="-0.15" y1="0.05" x2="0.15" y2="0.1" layer="51"/>
<rectangle x1="-0.15" y1="-0.1" x2="0.15" y2="-0.05" layer="51"/>
</package>
</packages>
<packages3d>
<package3d name="R0402" urn="urn:adsk.eagle:package:26058/1" type="box" library_version="1">
<description>RESISTOR</description>
<packageinstances>
<packageinstance name="R0402"/>
</packageinstances>
</package3d>
<package3d name="R0603" urn="urn:adsk.eagle:package:26057/1" type="box" library_version="1">
<description>RESISTOR</description>
<packageinstances>
<packageinstance name="R0603"/>
</packageinstances>
</package3d>
<package3d name="R0805" urn="urn:adsk.eagle:package:26059/1" type="box" library_version="1">
<description>RESISTOR</description>
<packageinstances>
<packageinstance name="R0805"/>
</packageinstances>
</package3d>
<package3d name="R0805W" urn="urn:adsk.eagle:package:26060/1" type="box" library_version="1">
<description>RESISTOR wave soldering</description>
<packageinstances>
<packageinstance name="R0805W"/>
</packageinstances>
</package3d>
<package3d name="R1206" urn="urn:adsk.eagle:package:26062/1" type="box" library_version="1">
<description>RESISTOR</description>
<packageinstances>
<packageinstance name="R1206"/>
</packageinstances>
</package3d>
<package3d name="R1206W" urn="urn:adsk.eagle:package:26064/1" type="box" library_version="1">
<description>RESISTOR
wave soldering</description>
<packageinstances>
<packageinstance name="R1206W"/>
</packageinstances>
</package3d>
<package3d name="R1210" urn="urn:adsk.eagle:package:26063/1" type="box" library_version="1">
<description>RESISTOR</description>
<packageinstances>
<packageinstance name="R1210"/>
</packageinstances>
</package3d>
<package3d name="R1210W" urn="urn:adsk.eagle:package:26065/1" type="box" library_version="1">
<description>RESISTOR
wave soldering</description>
<packageinstances>
<packageinstance name="R1210W"/>
</packageinstances>
</package3d>
<package3d name="R2010" urn="urn:adsk.eagle:package:26066/1" type="box" library_version="1">
<description>RESISTOR</description>
<packageinstances>
<packageinstance name="R2010"/>
</packageinstances>
</package3d>
<package3d name="R2010W" urn="urn:adsk.eagle:package:26068/1" type="box" library_version="1">
<description>RESISTOR
wave soldering</description>
<packageinstances>
<packageinstance name="R2010W"/>
</packageinstances>
</package3d>
<package3d name="R2012" urn="urn:adsk.eagle:package:26067/1" type="box" library_version="1">
<description>RESISTOR</description>
<packageinstances>
<packageinstance name="R2012"/>
</packageinstances>
</package3d>
<package3d name="R2012W" urn="urn:adsk.eagle:package:26069/1" type="box" library_version="1">
<description>RESISTOR
wave soldering</description>
<packageinstances>
<packageinstance name="R2012W"/>
</packageinstances>
</package3d>
<package3d name="R2512" urn="urn:adsk.eagle:package:26070/1" type="box" library_version="1">
<description>RESISTOR</description>
<packageinstances>
<packageinstance name="R2512"/>
</packageinstances>
</package3d>
<package3d name="R2512W" urn="urn:adsk.eagle:package:26072/1" type="box" library_version="1">
<description>RESISTOR
wave soldering</description>
<packageinstances>
<packageinstance name="R2512W"/>
</packageinstances>
</package3d>
<package3d name="R3216" urn="urn:adsk.eagle:package:26071/1" type="box" library_version="1">
<description>RESISTOR</description>
<packageinstances>
<packageinstance name="R3216"/>
</packageinstances>
</package3d>
<package3d name="R3216W" urn="urn:adsk.eagle:package:26074/1" type="box" library_version="1">
<description>RESISTOR
wave soldering</description>
<packageinstances>
<packageinstance name="R3216W"/>
</packageinstances>
</package3d>
<package3d name="R3225" urn="urn:adsk.eagle:package:26073/1" type="box" library_version="1">
<description>RESISTOR</description>
<packageinstances>
<packageinstance name="R3225"/>
</packageinstances>
</package3d>
<package3d name="R3225W" urn="urn:adsk.eagle:package:26075/1" type="box" library_version="1">
<description>RESISTOR
wave soldering</description>
<packageinstances>
<packageinstance name="R3225W"/>
</packageinstances>
</package3d>
<package3d name="R5025" urn="urn:adsk.eagle:package:26080/1" type="box" library_version="1">
<description>RESISTOR</description>
<packageinstances>
<packageinstance name="R5025"/>
</packageinstances>
</package3d>
<package3d name="R5025W" urn="urn:adsk.eagle:package:26077/1" type="box" library_version="1">
<description>RESISTOR
wave soldering</description>
<packageinstances>
<packageinstance name="R5025W"/>
</packageinstances>
</package3d>
<package3d name="R6332" urn="urn:adsk.eagle:package:26076/1" type="box" library_version="1">
<description>RESISTOR
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf</description>
<packageinstances>
<packageinstance name="R6332"/>
</packageinstances>
</package3d>
<package3d name="R6332W" urn="urn:adsk.eagle:package:26078/1" type="box" library_version="1">
<description>RESISTOR wave soldering
Source: http://download.siliconexpert.com/pdfs/2005/02/24/Semi_Ap/2/VSH/Resistor/dcrcwfre.pdf</description>
<packageinstances>
<packageinstance name="R6332W"/>
</packageinstances>
</package3d>
<package3d name="M0805" urn="urn:adsk.eagle:package:26079/1" type="box" library_version="1">
<description>RESISTOR
MELF 0.10 W</description>
<packageinstances>
<packageinstance name="M0805"/>
</packageinstances>
</package3d>
<package3d name="M1206" urn="urn:adsk.eagle:package:26088/1" type="box" library_version="1">
<description>RESISTOR
MELF 0.25 W</description>
<packageinstances>
<packageinstance name="M1206"/>
</packageinstances>
</package3d>
<package3d name="M1406" urn="urn:adsk.eagle:package:26081/1" type="box" library_version="1">
<description>RESISTOR
MELF 0.12 W</description>
<packageinstances>
<packageinstance name="M1406"/>
</packageinstances>
</package3d>
<package3d name="M2012" urn="urn:adsk.eagle:package:26082/1" type="box" library_version="1">
<description>RESISTOR
MELF 0.10 W</description>
<packageinstances>
<packageinstance name="M2012"/>
</packageinstances>
</package3d>
<package3d name="M2309" urn="urn:adsk.eagle:package:26085/1" type="box" library_version="1">
<description>RESISTOR
MELF 0.25 W</description>
<packageinstances>
<packageinstance name="M2309"/>
</packageinstances>
</package3d>
<package3d name="M3216" urn="urn:adsk.eagle:package:26083/1" type="box" library_version="1">
<description>RESISTOR
MELF 0.25 W</description>
<packageinstances>
<packageinstance name="M3216"/>
</packageinstances>
</package3d>
<package3d name="M3516" urn="urn:adsk.eagle:package:26086/1" type="box" library_version="1">
<description>RESISTOR
MELF 0.12 W</description>
<packageinstances>
<packageinstance name="M3516"/>
</packageinstances>
</package3d>
<package3d name="M5923" urn="urn:adsk.eagle:package:26084/1" type="box" library_version="1">
<description>RESISTOR
MELF 0.25 W</description>
<packageinstances>
<packageinstance name="M5923"/>
</packageinstances>
</package3d>
<package3d name="0204/5" urn="urn:adsk.eagle:package:25955/1" type="box" library_version="1">
<description>RESISTOR
type 0204, grid 5 mm</description>
<packageinstances>
<packageinstance name="0204/5"/>
</packageinstances>
</package3d>
<package3d name="0204/7" urn="urn:adsk.eagle:package:25945/1" type="box" library_version="1">
<description>RESISTOR
type 0204, grid 7.5 mm</description>
<packageinstances>
<packageinstance name="0204/7"/>
</packageinstances>
</package3d>
<package3d name="0207/10" urn="urn:adsk.eagle:package:25939/1" type="box" library_version="1">
<description>RESISTOR
type 0207, grid 10 mm</description>
<packageinstances>
<packageinstance name="0207/10"/>
</packageinstances>
</package3d>
<package3d name="0207/12" urn="urn:adsk.eagle:package:25938/1" type="box" library_version="1">
<description>RESISTOR
type 0207, grid 12 mm</description>
<packageinstances>
<packageinstance name="0207/12"/>
</packageinstances>
</package3d>
<package3d name="0207/15" urn="urn:adsk.eagle:package:25947/1" type="box" library_version="1">
<description>RESISTOR
type 0207, grid 15mm</description>
<packageinstances>
<packageinstance name="0207/15"/>
</packageinstances>
</package3d>
<package3d name="0207/2V" urn="urn:adsk.eagle:package:25941/1" type="box" library_version="1">
<description>RESISTOR
type 0207, grid 2.5 mm</description>
<packageinstances>
<packageinstance name="0207/2V"/>
</packageinstances>
</package3d>
<package3d name="0207/5V" urn="urn:adsk.eagle:package:25944/1" type="box" library_version="1">
<description>RESISTOR
type 0207, grid 5 mm</description>
<packageinstances>
<packageinstance name="0207/5V"/>
</packageinstances>
</package3d>
<package3d name="0207/7" urn="urn:adsk.eagle:package:25942/1" type="box" library_version="1">
<description>RESISTOR
type 0207, grid 7.5 mm</description>
<packageinstances>
<packageinstance name="0207/7"/>
</packageinstances>
</package3d>
<package3d name="0309/10" urn="urn:adsk.eagle:package:26087/1" type="box" library_version="1">
<description>RESISTOR
type 0309, grid 10mm</description>
<packageinstances>
<packageinstance name="0309/10"/>
</packageinstances>
</package3d>
<package3d name="0309/12" urn="urn:adsk.eagle:package:26089/1" type="box" library_version="1">
<description>RESISTOR
type 0309, grid 12.5 mm</description>
<packageinstances>
<packageinstance name="0309/12"/>
</packageinstances>
</package3d>
<package3d name="0411/12" urn="urn:adsk.eagle:package:26091/1" type="box" library_version="1">
<description>RESISTOR
type 0411, grid 12.5 mm</description>
<packageinstances>
<packageinstance name="0411/12"/>
</packageinstances>
</package3d>
<package3d name="0411/15" urn="urn:adsk.eagle:package:26093/1" type="box" library_version="1">
<description>RESISTOR
type 0411, grid 15 mm</description>
<packageinstances>
<packageinstance name="0411/15"/>
</packageinstances>
</package3d>
<package3d name="0411V" urn="urn:adsk.eagle:package:26092/1" type="box" library_version="1">
<description>RESISTOR
type 0411, grid 3.81 mm</description>
<packageinstances>
<packageinstance name="0411V"/>
</packageinstances>
</package3d>
<package3d name="0414/15" urn="urn:adsk.eagle:package:26094/1" type="box" library_version="1">
<description>RESISTOR
type 0414, grid 15 mm</description>
<packageinstances>
<packageinstance name="0414/15"/>
</packageinstances>
</package3d>
<package3d name="0414V" urn="urn:adsk.eagle:package:26095/1" type="box" library_version="1">
<description>RESISTOR
type 0414, grid 5 mm</description>
<packageinstances>
<packageinstance name="0414V"/>
</packageinstances>
</package3d>
<package3d name="0617/17" urn="urn:adsk.eagle:package:26096/1" type="box" library_version="1">
<description>RESISTOR
type 0617, grid 17.5 mm</description>
<packageinstances>
<packageinstance name="0617/17"/>
</packageinstances>
</package3d>
<package3d name="0617/22" urn="urn:adsk.eagle:package:26103/1" type="box" library_version="1">
<description>RESISTOR
type 0617, grid 22.5 mm</description>
<packageinstances>
<packageinstance name="0617/22"/>
</packageinstances>
</package3d>
<package3d name="0617V" urn="urn:adsk.eagle:package:26097/1" type="box" library_version="1">
<description>RESISTOR
type 0617, grid 5 mm</description>
<packageinstances>
<packageinstance name="0617V"/>
</packageinstances>
</package3d>
<package3d name="0922/22" urn="urn:adsk.eagle:package:26107/1" type="box" library_version="1">
<description>RESISTOR
type 0922, grid 22.5 mm</description>
<packageinstances>
<packageinstance name="0922/22"/>
</packageinstances>
</package3d>
<package3d name="P0613V" urn="urn:adsk.eagle:package:26106/1" type="box" library_version="1">
<description>RESISTOR
type 0613, grid 5 mm</description>
<packageinstances>
<packageinstance name="P0613V"/>
</packageinstances>
</package3d>
<package3d name="P0613/15" urn="urn:adsk.eagle:package:26098/1" type="box" library_version="1">
<description>RESISTOR
type 0613, grid 15 mm</description>
<packageinstances>
<packageinstance name="P0613/15"/>
</packageinstances>
</package3d>
<package3d name="P0817/22" urn="urn:adsk.eagle:package:26099/1" type="box" library_version="1">
<description>RESISTOR
type 0817, grid 22.5 mm</description>
<packageinstances>
<packageinstance name="P0817/22"/>
</packageinstances>
</package3d>
<package3d name="P0817V" urn="urn:adsk.eagle:package:26100/1" type="box" library_version="1">
<description>RESISTOR
type 0817, grid 6.35 mm</description>
<packageinstances>
<packageinstance name="P0817V"/>
</packageinstances>
</package3d>
<package3d name="V234/12" urn="urn:adsk.eagle:package:26108/1" type="box" library_version="1">
<description>RESISTOR
type V234, grid 12.5 mm</description>
<packageinstances>
<packageinstance name="V234/12"/>
</packageinstances>
</package3d>
<package3d name="V235/17" urn="urn:adsk.eagle:package:26102/1" type="box" library_version="1">
<description>RESISTOR
type V235, grid 17.78 mm</description>
<packageinstances>
<packageinstance name="V235/17"/>
</packageinstances>
</package3d>
<package3d name="V526-0" urn="urn:adsk.eagle:package:26101/1" type="box" library_version="1">
<description>RESISTOR
type V526-0, grid 2.5 mm</description>
<packageinstances>
<packageinstance name="V526-0"/>
</packageinstances>
</package3d>
<package3d name="MINI_MELF-0102AX" urn="urn:adsk.eagle:package:26115/1" type="box" library_version="1">
<description>Mini MELF 0102 Axial</description>
<packageinstances>
<packageinstance name="MINI_MELF-0102AX"/>
</packageinstances>
</package3d>
<package3d name="0922V" urn="urn:adsk.eagle:package:26110/1" type="box" library_version="1">
<description>RESISTOR
type 0922, grid 7.5 mm</description>
<packageinstances>
<packageinstance name="0922V"/>
</packageinstances>
</package3d>
<package3d name="MINI_MELF-0102R" urn="urn:adsk.eagle:package:26104/1" type="box" library_version="1">
<description>CECC Size RC2211 Reflow Soldering
source Beyschlag</description>
<packageinstances>
<packageinstance name="MINI_MELF-0102R"/>
</packageinstances>
</package3d>
<package3d name="MINI_MELF-0102W" urn="urn:adsk.eagle:package:26105/1" type="box" library_version="1">
<description>CECC Size RC2211 Wave Soldering
source Beyschlag</description>
<packageinstances>
<packageinstance name="MINI_MELF-0102W"/>
</packageinstances>
</package3d>
<package3d name="MINI_MELF-0204R" urn="urn:adsk.eagle:package:26109/1" type="box" library_version="1">
<description>CECC Size RC3715 Reflow Soldering
source Beyschlag</description>
<packageinstances>
<packageinstance name="MINI_MELF-0204R"/>
</packageinstances>
</package3d>
<package3d name="MINI_MELF-0204W" urn="urn:adsk.eagle:package:26111/1" type="box" library_version="1">
<description>CECC Size RC3715 Wave Soldering
source Beyschlag</description>
<packageinstances>
<packageinstance name="MINI_MELF-0204W"/>
</packageinstances>
</package3d>
<package3d name="MINI_MELF-0207R" urn="urn:adsk.eagle:package:26113/1" type="box" library_version="1">
<description>CECC Size RC6123 Reflow Soldering
source Beyschlag</description>
<packageinstances>
<packageinstance name="MINI_MELF-0207R"/>
</packageinstances>
</package3d>
<package3d name="MINI_MELF-0207W" urn="urn:adsk.eagle:package:26112/1" type="box" library_version="1">
<description>CECC Size RC6123 Wave Soldering
source Beyschlag</description>
<packageinstances>
<packageinstance name="MINI_MELF-0207W"/>
</packageinstances>
</package3d>
<package3d name="RDH/15" urn="urn:adsk.eagle:package:26114/1" type="box" library_version="1">
<description>RESISTOR
type RDH, grid 15 mm</description>
<packageinstances>
<packageinstance name="RDH/15"/>
</packageinstances>
</package3d>
<package3d name="0204V" urn="urn:adsk.eagle:package:25948/1" type="box" library_version="1">
<description>RESISTOR
type 0204, grid 2.5 mm</description>
<packageinstances>
<packageinstance name="0204V"/>
</packageinstances>
</package3d>
<package3d name="0309V" urn="urn:adsk.eagle:package:26090/1" type="box" library_version="1">
<description>RESISTOR
type 0309, grid 2.5 mm</description>
<packageinstances>
<packageinstance name="0309V"/>
</packageinstances>
</package3d>
<package3d name="R0201" urn="urn:adsk.eagle:package:26117/1" type="box" library_version="1">
<description>RESISTOR chip
Source: http://www.vishay.com/docs/20008/dcrcw.pdf</description>
<packageinstances>
<packageinstance name="R0201"/>
</packageinstances>
</package3d>
<package3d name="VMTA55" urn="urn:adsk.eagle:package:26121/1" type="box" library_version="1">
<description>Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RNC55
Source: VISHAY .. vta56.pdf</description>
<packageinstances>
<packageinstance name="VMTA55"/>
</packageinstances>
</package3d>
<package3d name="VMTB60" urn="urn:adsk.eagle:package:26122/1" type="box" library_version="1">
<description>Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RNC60
Source: VISHAY .. vta56.pdf</description>
<packageinstances>
<packageinstance name="VMTB60"/>
</packageinstances>
</package3d>
<package3d name="VTA52" urn="urn:adsk.eagle:package:26116/1" type="box" library_version="1">
<description>Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR52
Source: VISHAY .. vta56.pdf</description>
<packageinstances>
<packageinstance name="VTA52"/>
</packageinstances>
</package3d>
<package3d name="VTA53" urn="urn:adsk.eagle:package:26118/1" type="box" library_version="1">
<description>Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR53
Source: VISHAY .. vta56.pdf</description>
<packageinstances>
<packageinstance name="VTA53"/>
</packageinstances>
</package3d>
<package3d name="VTA54" urn="urn:adsk.eagle:package:26119/1" type="box" library_version="1">
<description>Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR54
Source: VISHAY .. vta56.pdf</description>
<packageinstances>
<packageinstance name="VTA54"/>
</packageinstances>
</package3d>
<package3d name="VTA55" urn="urn:adsk.eagle:package:26120/1" type="box" library_version="1">
<description>Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR55
Source: VISHAY .. vta56.pdf</description>
<packageinstances>
<packageinstance name="VTA55"/>
</packageinstances>
</package3d>
<package3d name="VTA56" urn="urn:adsk.eagle:package:26129/1" type="box" library_version="1">
<description>Bulk Metal® Foil Technology, Tubular Axial Lead Resistors, Meets or Exceeds MIL-R-39005 Requirements
MIL SIZE RBR56
Source: VISHAY .. vta56.pdf</description>
<packageinstances>
<packageinstance name="VTA56"/>
</packageinstances>
</package3d>
<package3d name="R4527" urn="urn:adsk.eagle:package:26124/1" type="box" library_version="1">
<description>Package 4527
Source: http://www.vishay.com/docs/31059/wsrhigh.pdf</description>
<packageinstances>
<packageinstance name="R4527"/>
</packageinstances>
</package3d>
<package3d name="WSC0001" urn="urn:adsk.eagle:package:26123/1" type="box" library_version="1">
<description>Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf</description>
<packageinstances>
<packageinstance name="WSC0001"/>
</packageinstances>
</package3d>
<package3d name="WSC0002" urn="urn:adsk.eagle:package:26125/1" type="box" library_version="1">
<description>Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf</description>
<packageinstances>
<packageinstance name="WSC0002"/>
</packageinstances>
</package3d>
<package3d name="WSC01/2" urn="urn:adsk.eagle:package:26127/1" type="box" library_version="1">
<description>Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf</description>
<packageinstances>
<packageinstance name="WSC01/2"/>
</packageinstances>
</package3d>
<package3d name="WSC2515" urn="urn:adsk.eagle:package:26134/1" type="box" library_version="1">
<description>Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf</description>
<packageinstances>
<packageinstance name="WSC2515"/>
</packageinstances>
</package3d>
<package3d name="WSC4527" urn="urn:adsk.eagle:package:26126/1" type="box" library_version="1">
<description>Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf</description>
<packageinstances>
<packageinstance name="WSC4527"/>
</packageinstances>
</package3d>
<package3d name="WSC6927" urn="urn:adsk.eagle:package:26128/1" type="box" library_version="1">
<description>Wirewound Resistors, Precision Power
Source: VISHAY wscwsn.pdf</description>
<packageinstances>
<packageinstance name="WSC6927"/>
</packageinstances>
</package3d>
<package3d name="R1218" urn="urn:adsk.eagle:package:26131/1" type="box" library_version="1">
<description>CRCW1218 Thick Film, Rectangular Chip Resistors
Source: http://www.vishay.com .. dcrcw.pdf</description>
<packageinstances>
<packageinstance name="R1218"/>
</packageinstances>
</package3d>
<package3d name="1812X7R" urn="urn:adsk.eagle:package:26130/1" type="box" library_version="1">
<description>Chip Monolithic Ceramic Capacitors Medium Voltage High Capacitance for General Use
Source: http://www.murata.com .. GRM43DR72E224KW01.pdf</description>
<packageinstances>
<packageinstance name="1812X7R"/>
</packageinstances>
</package3d>
<package3d name="R01005" urn="urn:adsk.eagle:package:26133/1" type="box" library_version="1">
<packageinstances>
<packageinstance name="R01005"/>
</packageinstances>
</package3d>
</packages3d>
<symbols>
<symbol name="R-US" urn="urn:adsk.eagle:symbol:25702/1" library_version="1">
<wire x1="-2.54" y1="0" x2="-2.159" y2="1.016" width="0.2032" layer="94"/>
<wire x1="-2.159" y1="1.016" x2="-1.524" y2="-1.016" width="0.2032" layer="94"/>
<wire x1="-1.524" y1="-1.016" x2="-0.889" y2="1.016" width="0.2032" layer="94"/>
<wire x1="-0.889" y1="1.016" x2="-0.254" y2="-1.016" width="0.2032" layer="94"/>
<wire x1="-0.254" y1="-1.016" x2="0.381" y2="1.016" width="0.2032" layer="94"/>
<wire x1="0.381" y1="1.016" x2="1.016" y2="-1.016" width="0.2032" layer="94"/>
<wire x1="1.016" y1="-1.016" x2="1.651" y2="1.016" width="0.2032" layer="94"/>
<wire x1="1.651" y1="1.016" x2="2.286" y2="-1.016" width="0.2032" layer="94"/>
<wire x1="2.286" y1="-1.016" x2="2.54" y2="0" width="0.2032" layer="94"/>
<text x="-3.81" y="1.4986" size="1.778" layer="95">&gt;NAME</text>
<text x="-3.81" y="-3.302" size="1.778" layer="96">&gt;VALUE</text>
<pin name="2" x="5.08" y="0" visible="off" length="short" direction="pas" swaplevel="1" rot="R180"/>
<pin name="1" x="-5.08" y="0" visible="off" length="short" direction="pas" swaplevel="1"/>
</symbol>
</symbols>
<devicesets>
<deviceset name="R-US_" urn="urn:adsk.eagle:component:26224/1" prefix="R" uservalue="yes" library_version="1">
<description>&lt;B&gt;RESISTOR&lt;/B&gt;, American symbol</description>
<gates>
<gate name="G$1" symbol="R-US" x="0" y="0"/>
</gates>
<devices>
<device name="R0402" package="R0402">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26058/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R0603" package="R0603">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26057/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R0805" package="R0805">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26059/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R0805W" package="R0805W">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26060/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R1206" package="R1206">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26062/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R1206W" package="R1206W">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26064/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R1210" package="R1210">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26063/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R1210W" package="R1210W">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26065/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R2010" package="R2010">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26066/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R2010W" package="R2010W">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26068/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R2012" package="R2012">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26067/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R2012W" package="R2012W">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26069/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R2512" package="R2512">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26070/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R2512W" package="R2512W">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26072/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R3216" package="R3216">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26071/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R3216W" package="R3216W">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26074/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R3225" package="R3225">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26073/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R3225W" package="R3225W">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26075/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R5025" package="R5025">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26080/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R5025W" package="R5025W">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26077/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R6332" package="R6332">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26076/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R6332W" package="R6332W">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26078/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="M0805" package="M0805">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26079/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="M1206" package="M1206">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26088/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="M1406" package="M1406">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26081/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="M2012" package="M2012">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26082/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="M2309" package="M2309">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26085/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="M3216" package="M3216">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26083/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="M3516" package="M3516">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26086/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="M5923" package="M5923">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26084/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0204/5" package="0204/5">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:25955/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0204/7" package="0204/7">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:25945/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0207/10" package="0207/10">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:25939/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0207/12" package="0207/12">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:25938/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0207/15" package="0207/15">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:25947/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0207/2V" package="0207/2V">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:25941/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0207/5V" package="0207/5V">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:25944/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0207/7" package="0207/7">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:25942/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0309/10" package="0309/10">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26087/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0309/12" package="0309/12">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26089/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0411/12" package="0411/12">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26091/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0411/15" package="0411/15">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26093/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0411/3V" package="0411V">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26092/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0414/15" package="0414/15">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26094/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0414/5V" package="0414V">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26095/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0617/17" package="0617/17">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26096/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0617/22" package="0617/22">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26103/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0617/5V" package="0617V">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26097/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0922/22" package="0922/22">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26107/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0613/5V" package="P0613V">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26106/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0613/15" package="P0613/15">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26098/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0817/22" package="P0817/22">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26099/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0817/7V" package="P0817V">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26100/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="V234/12" package="V234/12">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26108/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="V235/17" package="V235/17">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26102/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="V526-0" package="V526-0">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26101/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="MELF0102AX" package="MINI_MELF-0102AX">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26115/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0922V" package="0922V">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26110/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="MELF0102R" package="MINI_MELF-0102R">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26104/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="MELF0102W" package="MINI_MELF-0102W">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26105/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="MELF0204R" package="MINI_MELF-0204R">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26109/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="MELF0204W" package="MINI_MELF-0204W">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26111/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="MELF0207R" package="MINI_MELF-0207R">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26113/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="MELF0207W" package="MINI_MELF-0207W">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26112/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="RDH/15" package="RDH/15">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26114/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0204/2V" package="0204V">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:25948/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="0309/V" package="0309V">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26090/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R0201" package="R0201">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26117/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="VMTA55" package="VMTA55">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26121/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="VMTB60" package="VMTB60">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26122/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="VTA52" package="VTA52">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26116/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="VTA53" package="VTA53">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26118/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="VTA54" package="VTA54">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26119/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="VTA55" package="VTA55">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26120/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="VTA56" package="VTA56">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26129/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R4527" package="R4527">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26124/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="WSC0001" package="WSC0001">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26123/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="WSC0002" package="WSC0002">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26125/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="WSC01/2" package="WSC01/2">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26127/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="WSC2515" package="WSC2515">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26134/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="WSC4527" package="WSC4527">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26126/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="WSC6927" package="WSC6927">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26128/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="R1218" package="R1218">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26131/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="1812X7R" package="1812X7R">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26130/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="01005" package="R01005">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:26133/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
</devicesets>
</library>
<library name="SparkFun-Capacitors" urn="urn:adsk.eagle:library:510">
<description>&lt;h3&gt;SparkFun Capacitors&lt;/h3&gt;
This library contains capacitors. 
&lt;br&gt;
&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is &lt;b&gt; the end user's responsibility&lt;/b&gt; to ensure correctness and suitablity for a given componet or application. 
&lt;br&gt;
&lt;br&gt;If you enjoy using this library, please buy one of our products at &lt;a href=" www.sparkfun.com"&gt;SparkFun.com&lt;/a&gt;.
&lt;br&gt;
&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;
&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="0805" urn="urn:adsk.eagle:footprint:37400/1" library_version="1">
<description>&lt;p&gt;&lt;b&gt;Generic 2012 (0805) package&lt;/b&gt;&lt;/p&gt;
&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>
<smd name="1" x="-0.9" y="0" dx="0.8" dy="1.2" layer="1"/>
<smd name="2" x="0.9" y="0" dx="0.8" dy="1.2" layer="1"/>
<text x="0" y="0.889" size="0.6096" layer="25" font="vector" ratio="20" align="bottom-center">&gt;NAME</text>
<text x="0" y="-0.889" size="0.6096" layer="27" font="vector" ratio="20" align="top-center">&gt;VALUE</text>
<wire x1="-1.5" y1="0.8" x2="1.5" y2="0.8" width="0.0508" layer="39"/>
<wire x1="1.5" y1="0.8" x2="1.5" y2="-0.8" width="0.0508" layer="39"/>
<wire x1="1.5" y1="-0.8" x2="-1.5" y2="-0.8" width="0.0508" layer="39"/>
<wire x1="-1.5" y1="-0.8" x2="-1.5" y2="0.8" width="0.0508" layer="39"/>
</package>
<package name="1210" urn="urn:adsk.eagle:footprint:37401/1" library_version="1">
<description>&lt;p&gt;&lt;b&gt;Generic 3225 (1210) package&lt;/b&gt;&lt;/p&gt;
&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>
<wire x1="-1.5365" y1="1.1865" x2="1.5365" y2="1.1865" width="0.127" layer="51"/>
<wire x1="1.5365" y1="1.1865" x2="1.5365" y2="-1.1865" width="0.127" layer="51"/>
<wire x1="1.5365" y1="-1.1865" x2="-1.5365" y2="-1.1865" width="0.127" layer="51"/>
<wire x1="-1.5365" y1="-1.1865" x2="-1.5365" y2="1.1865" width="0.127" layer="51"/>
<wire x1="-2.59" y1="1.45" x2="2.59" y2="1.45" width="0.0508" layer="39"/>
<wire x1="2.59" y1="1.45" x2="2.59" y2="-1.45" width="0.0508" layer="39"/>
<wire x1="2.59" y1="-1.45" x2="-2.59" y2="-1.45" width="0.0508" layer="39"/>
<wire x1="-2.59" y1="-1.45" x2="-2.59" y2="1.45" width="0.0508" layer="39"/>
<smd name="1" x="-1.755" y="0" dx="1.27" dy="2.06" layer="1"/>
<smd name="2" x="1.755" y="0" dx="1.27" dy="2.06" layer="1"/>
<text x="0" y="1.397" size="0.6096" layer="25" font="vector" ratio="20" align="bottom-center">&gt;NAME</text>
<text x="0" y="-1.397" size="0.6096" layer="27" font="vector" ratio="20" align="top-center">&gt;VALUE</text>
</package>
<package name="0603" urn="urn:adsk.eagle:footprint:37386/1" library_version="1">
<description>&lt;p&gt;&lt;b&gt;Generic 1608 (0603) package&lt;/b&gt;&lt;/p&gt;
&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>
<wire x1="-1.6" y1="0.7" x2="1.6" y2="0.7" width="0.0508" layer="39"/>
<wire x1="1.6" y1="0.7" x2="1.6" y2="-0.7" width="0.0508" layer="39"/>
<wire x1="1.6" y1="-0.7" x2="-1.6" y2="-0.7" width="0.0508" layer="39"/>
<wire x1="-1.6" y1="-0.7" x2="-1.6" y2="0.7" width="0.0508" layer="39"/>
<wire x1="-0.356" y1="0.432" x2="0.356" y2="0.432" width="0.1016" layer="51"/>
<wire x1="-0.356" y1="-0.419" x2="0.356" y2="-0.419" width="0.1016" layer="51"/>
<smd name="1" x="-0.85" y="0" dx="1.1" dy="1" layer="1"/>
<smd name="2" x="0.85" y="0" dx="1.1" dy="1" layer="1"/>
<text x="0" y="0.762" size="0.6096" layer="25" font="vector" ratio="20" align="bottom-center">&gt;NAME</text>
<text x="0" y="-0.762" size="0.6096" layer="27" font="vector" ratio="20" align="top-center">&gt;VALUE</text>
<rectangle x1="-0.8382" y1="-0.4699" x2="-0.3381" y2="0.4801" layer="51"/>
<rectangle x1="0.3302" y1="-0.4699" x2="0.8303" y2="0.4801" layer="51"/>
<rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
</package>
<package name="1206" urn="urn:adsk.eagle:footprint:37399/1" library_version="1">
<description>&lt;p&gt;&lt;b&gt;Generic 3216 (1206) package&lt;/b&gt;&lt;/p&gt;
&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>
<wire x1="-2.4" y1="1.1" x2="2.4" y2="1.1" width="0.0508" layer="39"/>
<wire x1="2.4" y1="-1.1" x2="-2.4" y2="-1.1" width="0.0508" layer="39"/>
<wire x1="-2.4" y1="-1.1" x2="-2.4" y2="1.1" width="0.0508" layer="39"/>
<wire x1="2.4" y1="1.1" x2="2.4" y2="-1.1" width="0.0508" layer="39"/>
<wire x1="-0.965" y1="0.787" x2="0.965" y2="0.787" width="0.1016" layer="51"/>
<wire x1="-0.965" y1="-0.787" x2="0.965" y2="-0.787" width="0.1016" layer="51"/>
<smd name="1" x="-1.4" y="0" dx="1.6" dy="1.8" layer="1"/>
<smd name="2" x="1.4" y="0" dx="1.6" dy="1.8" layer="1"/>
<text x="0" y="1.143" size="0.6096" layer="25" font="vector" ratio="20" align="bottom-center">&gt;NAME</text>
<text x="0" y="-1.143" size="0.6096" layer="27" font="vector" ratio="20" align="top-center">&gt;VALUE</text>
<rectangle x1="-1.7018" y1="-0.8509" x2="-0.9517" y2="0.8491" layer="51"/>
<rectangle x1="0.9517" y1="-0.8491" x2="1.7018" y2="0.8509" layer="51"/>
<rectangle x1="-0.1999" y1="-0.4001" x2="0.1999" y2="0.4001" layer="35"/>
</package>
</packages>
<packages3d>
<package3d name="0805" urn="urn:adsk.eagle:package:37429/1" type="box" library_version="1">
<description>Generic 2012 (0805) package
0.2mm courtyard excess rounded to nearest 0.05mm.</description>
<packageinstances>
<packageinstance name="0805"/>
</packageinstances>
</package3d>
<package3d name="1210" urn="urn:adsk.eagle:package:37436/1" type="box" library_version="1">
<description>Generic 3225 (1210) package
0.2mm courtyard excess rounded to nearest 0.05mm.</description>
<packageinstances>
<packageinstance name="1210"/>
</packageinstances>
</package3d>
<package3d name="0603" urn="urn:adsk.eagle:package:37414/1" type="box" library_version="1">
<description>Generic 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.</description>
<packageinstances>
<packageinstance name="0603"/>
</packageinstances>
</package3d>
<package3d name="1206" urn="urn:adsk.eagle:package:37426/1" type="box" library_version="1">
<description>Generic 3216 (1206) package
0.2mm courtyard excess rounded to nearest 0.05mm.</description>
<packageinstances>
<packageinstance name="1206"/>
</packageinstances>
</package3d>
</packages3d>
<symbols>
<symbol name="CAP" urn="urn:adsk.eagle:symbol:37385/1" library_version="1">
<wire x1="0" y1="2.54" x2="0" y2="2.032" width="0.1524" layer="94"/>
<wire x1="0" y1="0" x2="0" y2="0.508" width="0.1524" layer="94"/>
<text x="1.524" y="2.921" size="1.778" layer="95" font="vector">&gt;NAME</text>
<text x="1.524" y="-2.159" size="1.778" layer="96" font="vector">&gt;VALUE</text>
<rectangle x1="-2.032" y1="0.508" x2="2.032" y2="1.016" layer="94"/>
<rectangle x1="-2.032" y1="1.524" x2="2.032" y2="2.032" layer="94"/>
<pin name="1" x="0" y="5.08" visible="off" length="short" direction="pas" swaplevel="1" rot="R270"/>
<pin name="2" x="0" y="-2.54" visible="off" length="short" direction="pas" swaplevel="1" rot="R90"/>
</symbol>
</symbols>
<devicesets>
<deviceset name="22UF" urn="urn:adsk.eagle:component:37479/1" prefix="C" library_version="1">
<description>&lt;h3&gt;22µF ceramic capacitors&lt;/h3&gt;
&lt;p&gt;A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.&lt;/p&gt;</description>
<gates>
<gate name="G$1" symbol="CAP" x="0" y="0"/>
</gates>
<devices>
<device name="-0805-6.3V-20%" package="0805">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:37429/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CAP-08402"/>
<attribute name="VALUE" value="22uF"/>
</technology>
</technologies>
</device>
<device name="-1210-16V-20%" package="1210">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:37436/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
<deviceset name="4.7UF" urn="urn:adsk.eagle:component:37469/1" prefix="C" library_version="1">
<description>&lt;h3&gt;4.7µF ceramic capacitors&lt;/h3&gt;
&lt;p&gt;A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.&lt;/p&gt;</description>
<gates>
<gate name="G$1" symbol="CAP" x="0" y="-2.54"/>
</gates>
<devices>
<device name="0603" package="0603">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:37414/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CAP-08280"/>
<attribute name="VALUE" value="4.7uF"/>
</technology>
</technologies>
</device>
<device name="-1206-16V-(+80/-20%)" package="1206">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:37426/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CAP-10300" constant="no"/>
<attribute name="VALUE" value="4.7uF" constant="no"/>
</technology>
</technologies>
</device>
</devices>
</deviceset>
</devicesets>
</library>
<library name="SparkFun-Connectors" urn="urn:adsk.eagle:library:513">
<description>&lt;h3&gt;SparkFun Connectors&lt;/h3&gt;
This library contains electrically-functional connectors. 
&lt;br&gt;
&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is &lt;b&gt; the end user's responsibility&lt;/b&gt; to ensure correctness and suitablity for a given componet or application. 
&lt;br&gt;
&lt;br&gt;If you enjoy using this library, please buy one of our products at &lt;a href=" www.sparkfun.com"&gt;SparkFun.com&lt;/a&gt;.
&lt;br&gt;
&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;
&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="PAD.02X.02" urn="urn:adsk.eagle:footprint:37959/1" library_version="1">
<description>&lt;h3&gt;Electrically Conductive Pad 0.02" Square&lt;/h3&gt;
Used as a test point connection for pogo pins or other debugging tools. 
&lt;p&gt;Specifications:
&lt;li&gt;Area: 0.02" x 0.02"&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;TEST_POINT&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<smd name="P$1" x="0" y="0" dx="0.508" dy="0.508" layer="1"/>
</package>
<package name="PAD.03X.03" urn="urn:adsk.eagle:footprint:37960/1" library_version="1">
<description>&lt;h3&gt;Electrically Conductive Pad 0.03" Circle&lt;/h3&gt;
Used as a test point connection for pogo pins or other debugging tools. 
&lt;p&gt;Specifications:
&lt;li&gt;Area: 0.03" x 0.03"&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;TEST_POINT&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<smd name="P$1" x="0" y="0" dx="0.762" dy="0.762" layer="1" roundness="100" cream="no"/>
</package>
<package name="PAD.03X.05" urn="urn:adsk.eagle:footprint:37961/1" library_version="1">
<description>&lt;h3&gt;Electrically Conductive Pad 0.05" Circle&lt;/h3&gt;
Used as a test point connection for pogo pins or other debugging tools. 
&lt;p&gt;Specifications:
&lt;li&gt;Area: 0.05" x 0.05"&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;TEST_POINT&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<smd name="P$1" x="0" y="0" dx="1.27" dy="1.27" layer="1" roundness="100" cream="no"/>
</package>
<package name="PAD.03X.04" urn="urn:adsk.eagle:footprint:37962/1" library_version="1">
<description>&lt;h3&gt;Electrically Conductive Pad 0.04" Circle&lt;/h3&gt;
Used as a test point connection for pogo pins or other debugging tools. 
&lt;p&gt;Specifications:
&lt;li&gt;Area: 0.04" x 0.04"&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;TEST_POINT&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<smd name="P$1" x="0" y="0" dx="1.016" dy="1.016" layer="1" roundness="100" cream="no"/>
</package>
<package name="TP_15TH" urn="urn:adsk.eagle:footprint:37963/1" library_version="1">
<description>&lt;h3&gt;Electrically Conductive Via 0.015" Drill&lt;/h3&gt;
Used as a test point connection for pogo pins or other debugging tools. 
&lt;p&gt;Specifications:
&lt;li&gt;Area:0.015"&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;TEST_POINT&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<pad name="P$1" x="0" y="0" drill="0.381" diameter="0.6096" stop="no"/>
<circle x="0" y="0" radius="0.381" width="0" layer="30"/>
</package>
<package name="1X03" urn="urn:adsk.eagle:footprint:37678/1" library_version="1">
<description>&lt;h3&gt;Plated Through Hole - 3 Pin&lt;/h3&gt;
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count:3&lt;/li&gt;
&lt;li&gt;Pin pitch:0.1"&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;CONN_03&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<wire x1="3.81" y1="0.635" x2="4.445" y2="1.27" width="0.2032" layer="21"/>
<wire x1="4.445" y1="1.27" x2="5.715" y2="1.27" width="0.2032" layer="21"/>
<wire x1="5.715" y1="1.27" x2="6.35" y2="0.635" width="0.2032" layer="21"/>
<wire x1="6.35" y1="-0.635" x2="5.715" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="5.715" y1="-1.27" x2="4.445" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="4.445" y1="-1.27" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="-0.635" y1="1.27" x2="0.635" y2="1.27" width="0.2032" layer="21"/>
<wire x1="0.635" y1="1.27" x2="1.27" y2="0.635" width="0.2032" layer="21"/>
<wire x1="1.27" y1="-0.635" x2="0.635" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="1.27" y1="0.635" x2="1.905" y2="1.27" width="0.2032" layer="21"/>
<wire x1="1.905" y1="1.27" x2="3.175" y2="1.27" width="0.2032" layer="21"/>
<wire x1="3.175" y1="1.27" x2="3.81" y2="0.635" width="0.2032" layer="21"/>
<wire x1="3.81" y1="-0.635" x2="3.175" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="3.175" y1="-1.27" x2="1.905" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="1.905" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="-1.27" y1="0.635" x2="-1.27" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="-0.635" y1="1.27" x2="-1.27" y2="0.635" width="0.2032" layer="21"/>
<wire x1="-1.27" y1="-0.635" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="0.635" y1="-1.27" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="6.35" y1="0.635" x2="6.35" y2="-0.635" width="0.2032" layer="21"/>
<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
<pad name="2" x="2.54" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
<pad name="3" x="5.08" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
<rectangle x1="4.826" y1="-0.254" x2="5.334" y2="0.254" layer="51"/>
<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
<text x="-1.27" y="1.397" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="-1.27" y="-2.032" size="0.6096" layer="27" font="vector" ratio="20">&gt;VALUE</text>
</package>
<package name="MOLEX-1X3" urn="urn:adsk.eagle:footprint:37679/1" library_version="1">
<description>&lt;h3&gt;PTH - 3 Pin Vertical Molex Polarized Header&lt;/h3&gt;
&lt;p&gt;&lt;b&gt;Datasheet referenced for footprint:&lt;/b&gt;&lt;a href="http://www.4uconnector.com/online/object/4udrawing/01932.pdf"&gt; 4UCONN part # 01932 &lt;/a&gt;&lt;/p&gt;
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count:3&lt;/li&gt;
&lt;li&gt;Pin pitch:0.1"&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;CONN_03&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<wire x1="-1.27" y1="3.048" x2="-1.27" y2="-2.54" width="0.127" layer="21"/>
<wire x1="6.35" y1="3.048" x2="6.35" y2="-2.54" width="0.127" layer="21"/>
<wire x1="6.35" y1="3.048" x2="-1.27" y2="3.048" width="0.127" layer="21"/>
<wire x1="6.35" y1="-2.54" x2="5.08" y2="-2.54" width="0.127" layer="21"/>
<wire x1="5.08" y1="-2.54" x2="0" y2="-2.54" width="0.127" layer="21"/>
<wire x1="0" y1="-2.54" x2="-1.27" y2="-2.54" width="0.127" layer="21"/>
<wire x1="0" y1="-2.54" x2="0" y2="-1.27" width="0.127" layer="21"/>
<wire x1="0" y1="-1.27" x2="5.08" y2="-1.27" width="0.127" layer="21"/>
<wire x1="5.08" y1="-1.27" x2="5.08" y2="-2.54" width="0.127" layer="21"/>
<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" shape="square"/>
<pad name="2" x="2.54" y="0" drill="1.016" diameter="1.8796"/>
<pad name="3" x="5.08" y="0" drill="1.016" diameter="1.8796"/>
<text x="1.143" y="2.159" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="0.889" y="1.27" size="0.6096" layer="27" font="vector" ratio="20">&gt;VALUE</text>
</package>
<package name="SCREWTERMINAL-3.5MM-3" urn="urn:adsk.eagle:footprint:37680/1" library_version="1">
<description>&lt;h3&gt;Screw Terminal  3.5mm Pitch -3 Pin PTH&lt;/h3&gt;
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count: 3&lt;/li&gt;
&lt;li&gt;Pin pitch: 3.5mm/138mil&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;&lt;a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”&gt;Datasheet referenced for footprint&lt;/a&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;CONN_03&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<wire x1="-1.75" y1="3.4" x2="8.75" y2="3.4" width="0.2032" layer="21"/>
<wire x1="8.75" y1="3.4" x2="8.75" y2="-2.8" width="0.2032" layer="21"/>
<wire x1="8.75" y1="-2.8" x2="8.75" y2="-3.6" width="0.2032" layer="21"/>
<wire x1="8.75" y1="-3.6" x2="-1.75" y2="-3.6" width="0.2032" layer="21"/>
<wire x1="-1.75" y1="-3.6" x2="-1.75" y2="-2.8" width="0.2032" layer="21"/>
<wire x1="-1.75" y1="-2.8" x2="-1.75" y2="3.4" width="0.2032" layer="21"/>
<wire x1="8.75" y1="-2.8" x2="-1.75" y2="-2.8" width="0.2032" layer="21"/>
<wire x1="-1.75" y1="-1.35" x2="-2.25" y2="-1.35" width="0.2032" layer="51"/>
<wire x1="-2.25" y1="-1.35" x2="-2.25" y2="-2.35" width="0.2032" layer="51"/>
<wire x1="-2.25" y1="-2.35" x2="-1.75" y2="-2.35" width="0.2032" layer="51"/>
<wire x1="8.75" y1="3.15" x2="9.25" y2="3.15" width="0.2032" layer="51"/>
<wire x1="9.25" y1="3.15" x2="9.25" y2="2.15" width="0.2032" layer="51"/>
<wire x1="9.25" y1="2.15" x2="8.75" y2="2.15" width="0.2032" layer="51"/>
<pad name="1" x="0" y="0" drill="1.2" diameter="2.413" shape="square"/>
<pad name="2" x="3.5" y="0" drill="1.2" diameter="2.413"/>
<pad name="3" x="7" y="0" drill="1.2" diameter="2.413"/>
<text x="2.159" y="3.683" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="2.032" y="-4.572" size="0.6096" layer="27" font="vector" ratio="20">&gt;VALUE</text>
</package>
<package name="1X03_LOCK" urn="urn:adsk.eagle:footprint:37681/1" library_version="1">
<description>&lt;h3&gt;Plated Through Hole - 3 Pin Locking Footprint&lt;/h3&gt;
Pins are staggered 0.005" off center to lock pins while soldering. 
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count:3&lt;/li&gt;
&lt;li&gt;Pin pitch:0.1"&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;CONN_03&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<wire x1="3.81" y1="0.635" x2="4.445" y2="1.27" width="0.2032" layer="21"/>
<wire x1="4.445" y1="1.27" x2="5.715" y2="1.27" width="0.2032" layer="21"/>
<wire x1="5.715" y1="1.27" x2="6.35" y2="0.635" width="0.2032" layer="21"/>
<wire x1="6.35" y1="-0.635" x2="5.715" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="5.715" y1="-1.27" x2="4.445" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="4.445" y1="-1.27" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="-0.635" y1="1.27" x2="0.635" y2="1.27" width="0.2032" layer="21"/>
<wire x1="0.635" y1="1.27" x2="1.27" y2="0.635" width="0.2032" layer="21"/>
<wire x1="1.27" y1="-0.635" x2="0.635" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="1.27" y1="0.635" x2="1.905" y2="1.27" width="0.2032" layer="21"/>
<wire x1="1.905" y1="1.27" x2="3.175" y2="1.27" width="0.2032" layer="21"/>
<wire x1="3.175" y1="1.27" x2="3.81" y2="0.635" width="0.2032" layer="21"/>
<wire x1="3.81" y1="-0.635" x2="3.175" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="3.175" y1="-1.27" x2="1.905" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="1.905" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="-1.27" y1="0.635" x2="-1.27" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="-0.635" y1="1.27" x2="-1.27" y2="0.635" width="0.2032" layer="21"/>
<wire x1="-1.27" y1="-0.635" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="0.635" y1="-1.27" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
<wire x1="6.35" y1="0.635" x2="6.35" y2="-0.635" width="0.2032" layer="21"/>
<pad name="1" x="0" y="0.127" drill="1.016" diameter="1.8796" rot="R90"/>
<pad name="2" x="2.54" y="-0.127" drill="1.016" diameter="1.8796" rot="R90"/>
<pad name="3" x="5.08" y="0.127" drill="1.016" diameter="1.8796" rot="R90"/>
<rectangle x1="4.826" y1="-0.254" x2="5.334" y2="0.254" layer="51"/>
<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
<text x="-1.27" y="1.397" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="-1.27" y="-2.032" size="0.6096" layer="27" font="vector" ratio="20">&gt;VALUE</text>
</package>
<package name="1X03_LOCK_LONGPADS" urn="urn:adsk.eagle:footprint:37682/1" library_version="1">
<description>&lt;h3&gt;Plated Through Hole - 3 Pin Long Pad w/ Locking Footprint&lt;/h3&gt;
Holes are offset 0.005" from center to lock pins in place while soldering. 
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count:3&lt;/li&gt;
&lt;li&gt;Pin pitch:0.1"&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;CONN_03&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<wire x1="1.524" y1="-0.127" x2="1.016" y2="-0.127" width="0.2032" layer="21"/>
<wire x1="4.064" y1="-0.127" x2="3.556" y2="-0.127" width="0.2032" layer="21"/>
<wire x1="-1.27" y1="-0.127" x2="-1.016" y2="-0.127" width="0.2032" layer="21"/>
<wire x1="-1.27" y1="-0.127" x2="-1.27" y2="0.8636" width="0.2032" layer="21"/>
<wire x1="-1.27" y1="0.8636" x2="-0.9906" y2="1.143" width="0.2032" layer="21"/>
<wire x1="-1.27" y1="-0.127" x2="-1.27" y2="-1.1176" width="0.2032" layer="21"/>
<wire x1="-1.27" y1="-1.1176" x2="-0.9906" y2="-1.397" width="0.2032" layer="21"/>
<wire x1="6.35" y1="-0.127" x2="6.096" y2="-0.127" width="0.2032" layer="21"/>
<wire x1="6.35" y1="-0.127" x2="6.35" y2="-1.1176" width="0.2032" layer="21"/>
<wire x1="6.35" y1="-1.1176" x2="6.0706" y2="-1.397" width="0.2032" layer="21"/>
<wire x1="6.35" y1="-0.127" x2="6.35" y2="0.8636" width="0.2032" layer="21"/>
<wire x1="6.35" y1="0.8636" x2="6.0706" y2="1.143" width="0.2032" layer="21"/>
<pad name="1" x="0" y="0" drill="1.016" shape="long" rot="R90"/>
<pad name="2" x="2.54" y="-0.254" drill="1.016" shape="long" rot="R90"/>
<pad name="3" x="5.08" y="0" drill="1.016" shape="long" rot="R90"/>
<rectangle x1="-0.2921" y1="-0.4191" x2="0.2921" y2="0.1651" layer="51"/>
<rectangle x1="2.2479" y1="-0.4191" x2="2.8321" y2="0.1651" layer="51"/>
<rectangle x1="4.7879" y1="-0.4191" x2="5.3721" y2="0.1651" layer="51"/>
<text x="-1.27" y="1.778" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="-1.27" y="-2.413" size="0.6096" layer="27" font="vector" ratio="20">&gt;VALUE</text>
</package>
<package name="MOLEX-1X3_LOCK" urn="urn:adsk.eagle:footprint:37683/1" library_version="1">
<description>&lt;h3&gt;PTH - 3 Pin Vertical Molex Polarized Header&lt;/h3&gt;
Pins are offset 0.005" from center to lock pins in place during soldering. 
&lt;p&gt;&lt;b&gt;Datasheet referenced for footprint:&lt;/b&gt;&lt;a href="http://www.4uconnector.com/online/object/4udrawing/01932.pdf"&gt; 4UCONN part # 01932 &lt;/a&gt;&lt;/p&gt;
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count:3&lt;/li&gt;
&lt;li&gt;Pin pitch:0.1"&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;CONN_03&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<wire x1="-1.27" y1="3.048" x2="-1.27" y2="-2.54" width="0.127" layer="21"/>
<wire x1="6.35" y1="3.048" x2="6.35" y2="-2.54" width="0.127" layer="21"/>
<wire x1="6.35" y1="3.048" x2="-1.27" y2="3.048" width="0.127" layer="21"/>
<wire x1="6.35" y1="-2.54" x2="5.08" y2="-2.54" width="0.127" layer="21"/>
<wire x1="5.08" y1="-2.54" x2="0" y2="-2.54" width="0.127" layer="21"/>
<wire x1="0" y1="-2.54" x2="-1.27" y2="-2.54" width="0.127" layer="21"/>
<wire x1="0" y1="-2.54" x2="0" y2="-1.27" width="0.127" layer="21"/>
<wire x1="0" y1="-1.27" x2="5.08" y2="-1.27" width="0.127" layer="21"/>
<wire x1="5.08" y1="-1.27" x2="5.08" y2="-2.54" width="0.127" layer="21"/>
<pad name="1" x="0" y="0.127" drill="1.016" diameter="1.8796" shape="square"/>
<pad name="2" x="2.54" y="-0.127" drill="1.016" diameter="1.8796"/>
<pad name="3" x="5.08" y="0.127" drill="1.016" diameter="1.8796"/>
<rectangle x1="-0.2921" y1="-0.2921" x2="0.2921" y2="0.2921" layer="51"/>
<rectangle x1="2.2479" y1="-0.2921" x2="2.8321" y2="0.2921" layer="51"/>
<rectangle x1="4.7879" y1="-0.2921" x2="5.3721" y2="0.2921" layer="51"/>
<text x="1.143" y="3.429" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="0.889" y="-2.794" size="0.6096" layer="27" font="vector" ratio="20" align="top-left">&gt;VALUE</text>
</package>
<package name="SCREWTERMINAL-3.5MM-3_LOCK.007S" urn="urn:adsk.eagle:footprint:37684/1" library_version="1">
<description>&lt;h3&gt;Screw Terminal  3.5mm Pitch -3 Pin PTH Locking&lt;/h3&gt;
Holes are offset 0.007" from center to hold pins in place during soldering. 
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count: 3&lt;/li&gt;
&lt;li&gt;Pin pitch: 3.5mm/138mil&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;&lt;a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”&gt;Datasheet referenced for footprint&lt;/a&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;CONN_03&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<wire x1="-1.75" y1="3.4" x2="8.75" y2="3.4" width="0.2032" layer="21"/>
<wire x1="8.75" y1="3.4" x2="8.75" y2="-2.8" width="0.2032" layer="21"/>
<wire x1="8.75" y1="-2.8" x2="8.75" y2="-3.6" width="0.2032" layer="21"/>
<wire x1="8.75" y1="-3.6" x2="-1.75" y2="-3.6" width="0.2032" layer="21"/>
<wire x1="-1.75" y1="-3.6" x2="-1.75" y2="-2.8" width="0.2032" layer="21"/>
<wire x1="-1.75" y1="-2.8" x2="-1.75" y2="3.4" width="0.2032" layer="21"/>
<wire x1="8.75" y1="-2.8" x2="-1.75" y2="-2.8" width="0.2032" layer="21"/>
<wire x1="-1.75" y1="-1.35" x2="-2.25" y2="-1.35" width="0.2032" layer="51"/>
<wire x1="-2.25" y1="-1.35" x2="-2.25" y2="-2.35" width="0.2032" layer="51"/>
<wire x1="-2.25" y1="-2.35" x2="-1.75" y2="-2.35" width="0.2032" layer="51"/>
<wire x1="8.75" y1="3.15" x2="9.25" y2="3.15" width="0.2032" layer="51"/>
<wire x1="9.25" y1="3.15" x2="9.25" y2="2.15" width="0.2032" layer="51"/>
<wire x1="9.25" y1="2.15" x2="8.75" y2="2.15" width="0.2032" layer="51"/>
<circle x="0" y="0" radius="0.425" width="0.001" layer="51"/>
<circle x="3.5" y="0" radius="0.425" width="0.001" layer="51"/>
<circle x="7" y="0" radius="0.425" width="0.001" layer="51"/>
<pad name="1" x="-0.1778" y="0" drill="1.2" diameter="2.032" shape="square"/>
<pad name="2" x="3.5" y="0" drill="1.2" diameter="2.032"/>
<pad name="3" x="7.1778" y="0" drill="1.2" diameter="2.032"/>
<text x="2.032" y="3.683" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="1.905" y="-4.699" size="0.6096" layer="27" font="vector" ratio="20">&gt;VALUE</text>
</package>
<package name="1X03_NO_SILK" urn="urn:adsk.eagle:footprint:37685/1" library_version="1">
<description>&lt;h3&gt;Plated Through Hole - 3 Pin No Silk Outline&lt;/h3&gt;
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count:3&lt;/li&gt;
&lt;li&gt;Pin pitch:0.1"&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;CONN_03&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
<pad name="2" x="2.54" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
<pad name="3" x="5.08" y="0" drill="1.016" diameter="1.8796" rot="R90"/>
<rectangle x1="4.826" y1="-0.254" x2="5.334" y2="0.254" layer="51"/>
<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
<text x="-1.27" y="1.397" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="-1.27" y="-2.032" size="0.6096" layer="27" font="vector" ratio="20">&gt;VALUE</text>
</package>
<package name="1X03_LONGPADS" urn="urn:adsk.eagle:footprint:37686/1" library_version="1">
<description>&lt;h3&gt;Plated Through Hole - 3 Pin Long Pads&lt;/h3&gt;
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count:3&lt;/li&gt;
&lt;li&gt;Pin pitch:0.1"&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;CONN_03&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<wire x1="-1.27" y1="0.635" x2="-1.27" y2="-0.635" width="0.2032" layer="21"/>
<wire x1="6.35" y1="0.635" x2="6.35" y2="-0.635" width="0.2032" layer="21"/>
<pad name="1" x="0" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/>
<pad name="2" x="2.54" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/>
<pad name="3" x="5.08" y="0" drill="1.1176" diameter="1.8796" shape="long" rot="R90"/>
<rectangle x1="4.826" y1="-0.254" x2="5.334" y2="0.254" layer="51"/>
<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
<text x="-1.27" y="2.032" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="-1.27" y="-2.667" size="0.6096" layer="27" font="vector" ratio="20">&gt;VALUE</text>
</package>
<package name="JST-3-PTH" urn="urn:adsk.eagle:footprint:37687/1" library_version="1">
<description>&lt;h3&gt;JST 3 Pin Right Angle Plated Through Hole&lt;/h3&gt;
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count:3&lt;/li&gt;
&lt;li&gt;Pin pitch:2mm&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;&lt;a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”&gt;Datasheet referenced for footprint&lt;/a&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;CONN_03&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<wire x1="-3.95" y1="-1.6" x2="-3.95" y2="6" width="0.2032" layer="21"/>
<wire x1="-3.95" y1="6" x2="3.95" y2="6" width="0.2032" layer="21"/>
<wire x1="3.95" y1="6" x2="3.95" y2="-1.6" width="0.2032" layer="21"/>
<wire x1="-3.95" y1="-1.6" x2="-3.3" y2="-1.6" width="0.2032" layer="21"/>
<wire x1="3.95" y1="-1.6" x2="3.3" y2="-1.6" width="0.2032" layer="21"/>
<wire x1="-3.3" y1="-1.6" x2="-3.3" y2="0" width="0.2032" layer="21"/>
<wire x1="3.3" y1="-1.6" x2="3.3" y2="0" width="0.2032" layer="21"/>
<pad name="1" x="-2" y="0" drill="0.7" diameter="1.6"/>
<pad name="2" x="0" y="0" drill="0.7" diameter="1.6"/>
<pad name="3" x="2" y="0" drill="0.7" diameter="1.6"/>
<text x="-2.4" y="0.67" size="1.27" layer="51">+</text>
<text x="-0.4" y="0.67" size="1.27" layer="51">-</text>
<text x="1.7" y="0.87" size="0.8" layer="51">S</text>
<text x="-1.397" y="3.429" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="-1.651" y="2.54" size="0.6096" layer="27" font="vector" ratio="20">&gt;VALUE</text>
</package>
<package name="1X03_PP_HOLES_ONLY" urn="urn:adsk.eagle:footprint:37688/1" library_version="1">
<description>&lt;h3&gt;Pogo Pins - 3 Pin&lt;/h3&gt;
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count:3&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;CONN_03&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<circle x="0" y="0" radius="0.635" width="0.127" layer="51"/>
<circle x="2.54" y="0" radius="0.635" width="0.127" layer="51"/>
<circle x="5.08" y="0" radius="0.635" width="0.127" layer="51"/>
<pad name="1" x="0" y="0" drill="0.9" diameter="0.8128" rot="R90"/>
<pad name="2" x="2.54" y="0" drill="0.9" diameter="0.8128" rot="R90"/>
<pad name="3" x="5.08" y="0" drill="0.9" diameter="0.8128" rot="R90"/>
<hole x="0" y="0" drill="1.4732"/>
<hole x="2.54" y="0" drill="1.4732"/>
<hole x="5.08" y="0" drill="1.4732"/>
<text x="-1.27" y="1.143" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="-1.27" y="-1.778" size="0.6096" layer="27" font="vector" ratio="20">&gt;VALUE</text>
</package>
<package name="SCREWTERMINAL-5MM-3" urn="urn:adsk.eagle:footprint:37689/1" library_version="1">
<description>&lt;h3&gt;Screw Terminal  5mm Pitch -3 Pin PTH&lt;/h3&gt;
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count: 3&lt;/li&gt;
&lt;li&gt;Pin pitch: 5mm/197mil&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;&lt;a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-5mm.pdf”&gt;Datasheet referenced for footprint&lt;/a&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;CONN_03&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<wire x1="-3.1" y1="4.2" x2="13.1" y2="4.2" width="0.2032" layer="21"/>
<wire x1="13.1" y1="4.2" x2="13.1" y2="-2.3" width="0.2032" layer="21"/>
<wire x1="13.1" y1="-2.3" x2="13.1" y2="-3.3" width="0.2032" layer="21"/>
<wire x1="13.1" y1="-3.3" x2="-3.1" y2="-3.3" width="0.2032" layer="21"/>
<wire x1="-3.1" y1="-3.3" x2="-3.1" y2="-2.3" width="0.2032" layer="21"/>
<wire x1="-3.1" y1="-2.3" x2="-3.1" y2="4.2" width="0.2032" layer="21"/>
<wire x1="13.1" y1="-2.3" x2="-3.1" y2="-2.3" width="0.2032" layer="21"/>
<wire x1="-3.1" y1="-1.35" x2="-3.7" y2="-1.35" width="0.2032" layer="51"/>
<wire x1="-3.7" y1="-1.35" x2="-3.7" y2="-2.35" width="0.2032" layer="51"/>
<wire x1="-3.7" y1="-2.35" x2="-3.1" y2="-2.35" width="0.2032" layer="51"/>
<wire x1="13.1" y1="4" x2="13.7" y2="4" width="0.2032" layer="51"/>
<wire x1="13.7" y1="4" x2="13.7" y2="3" width="0.2032" layer="51"/>
<wire x1="13.7" y1="3" x2="13.1" y2="3" width="0.2032" layer="51"/>
<circle x="2.5" y="3.7" radius="0.2828" width="0.127" layer="51"/>
<pad name="1" x="0" y="0" drill="1.3" diameter="2.413" shape="square"/>
<pad name="2" x="5" y="0" drill="1.3" diameter="2.413"/>
<pad name="3" x="10" y="0" drill="1.3" diameter="2.413"/>
<text x="3.683" y="2.794" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="3.429" y="1.905" size="0.6096" layer="27" font="vector" ratio="20">&gt;VALUE</text>
</package>
<package name="1X03_LOCK_NO_SILK" urn="urn:adsk.eagle:footprint:37690/1" library_version="1">
<description>&lt;h3&gt;Plated Through Hole - 3 Pin Locking Footprint w/out Silk Outline&lt;/h3&gt;
Holes are offset from center 0.005" to lock pins in place while soldering. 
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count:3&lt;/li&gt;
&lt;li&gt;Pin pitch:0.1"&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;CONN_03&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<pad name="1" x="0" y="0.127" drill="1.016" diameter="1.8796" rot="R90"/>
<pad name="2" x="2.54" y="-0.127" drill="1.016" diameter="1.8796" rot="R90"/>
<pad name="3" x="5.08" y="0.127" drill="1.016" diameter="1.8796" rot="R90"/>
<rectangle x1="4.826" y1="-0.254" x2="5.334" y2="0.254" layer="51"/>
<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
<text x="-1.27" y="1.397" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="-1.27" y="-2.032" size="0.6096" layer="27" font="vector" ratio="20">&gt;VALUE</text>
</package>
<package name="JST-3-SMD" urn="urn:adsk.eagle:footprint:37691/1" library_version="1">
<description>&lt;h3&gt;JST 3 Pin Right Angle SMT&lt;/h3&gt;
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count:3&lt;/li&gt;
&lt;li&gt;Pin pitch:2mm&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;CONN_03&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<wire x1="-4.99" y1="-2.07" x2="-4.99" y2="-5.57" width="0.2032" layer="21"/>
<wire x1="-4.99" y1="-5.57" x2="-4.19" y2="-5.57" width="0.2032" layer="21"/>
<wire x1="-4.19" y1="-5.57" x2="-4.19" y2="-3.07" width="0.2032" layer="21"/>
<wire x1="-4.19" y1="-3.07" x2="-2.99" y2="-3.07" width="0.2032" layer="21"/>
<wire x1="3.01" y1="-3.07" x2="4.21" y2="-3.07" width="0.2032" layer="21"/>
<wire x1="4.21" y1="-3.07" x2="4.21" y2="-5.57" width="0.2032" layer="21"/>
<wire x1="4.21" y1="-5.57" x2="5.01" y2="-5.57" width="0.2032" layer="21"/>
<wire x1="5.01" y1="-5.57" x2="5.01" y2="-2.07" width="0.2032" layer="21"/>
<wire x1="3.01" y1="1.93" x2="-2.99" y2="1.93" width="0.2032" layer="21"/>
<smd name="1" x="-1.99" y="-4.77" dx="1" dy="4.6" layer="1"/>
<smd name="3" x="2.01" y="-4.77" dx="1" dy="4.6" layer="1"/>
<smd name="NC1" x="-4.39" y="0.43" dx="3.4" dy="1.6" layer="1" rot="R90"/>
<smd name="NC2" x="4.41" y="0.43" dx="3.4" dy="1.6" layer="1" rot="R90"/>
<smd name="2" x="0.01" y="-4.77" dx="1" dy="4.6" layer="1"/>
<text x="-1.397" y="0.635" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="-1.651" y="-1.27" size="0.6096" layer="27" font="vector" ratio="20">&gt;VALUE</text>
</package>
<package name="1X03-1MM-RA" urn="urn:adsk.eagle:footprint:37692/1" library_version="1">
<description>&lt;h3&gt;Plated Through Hole - 3 Pin SMD&lt;/h3&gt;
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count:3&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;CONN_03&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<wire x1="-1" y1="-4.6" x2="1" y2="-4.6" width="0.254" layer="21"/>
<wire x1="-2.5" y1="-2" x2="-2.5" y2="-0.35" width="0.254" layer="21"/>
<wire x1="1.75" y1="-0.35" x2="2.4997" y2="-0.35" width="0.254" layer="21"/>
<wire x1="2.4997" y1="-0.35" x2="2.4997" y2="-2" width="0.254" layer="21"/>
<wire x1="-2.5" y1="-0.35" x2="-1.75" y2="-0.35" width="0.254" layer="21"/>
<circle x="-2" y="0.3" radius="0.1414" width="0.4" layer="21"/>
<smd name="NC2" x="-2.3" y="-3.675" dx="1.2" dy="2" layer="1"/>
<smd name="NC1" x="2.3" y="-3.675" dx="1.2" dy="2" layer="1"/>
<smd name="1" x="-1" y="0" dx="0.6" dy="1.35" layer="1"/>
<smd name="2" x="0" y="0" dx="0.6" dy="1.35" layer="1"/>
<smd name="3" x="1" y="0" dx="0.6" dy="1.35" layer="1"/>
<text x="-1.397" y="-1.651" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="-1.651" y="-2.54" size="0.6096" layer="27" font="vector" ratio="20">&gt;VALUE</text>
</package>
<package name="1X03_SMD_RA_FEMALE" urn="urn:adsk.eagle:footprint:37693/1" library_version="1">
<description>&lt;h3&gt;SMD - 3 Pin Right Angle Female Header&lt;/h3&gt;
Silk outline of pin location
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count:3&lt;/li&gt;
&lt;li&gt;Pin pitch:0.1"&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;CONN_03&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<wire x1="-3.935" y1="4.25" x2="-3.935" y2="-4.25" width="0.1778" layer="21"/>
<wire x1="3.935" y1="4.25" x2="-3.935" y2="4.25" width="0.1778" layer="21"/>
<wire x1="3.935" y1="-4.25" x2="3.935" y2="4.25" width="0.1778" layer="21"/>
<wire x1="-3.935" y1="-4.25" x2="3.935" y2="-4.25" width="0.1778" layer="21"/>
<rectangle x1="-0.32" y1="6.8" x2="0.32" y2="7.65" layer="51"/>
<rectangle x1="2.22" y1="6.8" x2="2.86" y2="7.65" layer="51"/>
<rectangle x1="-2.86" y1="6.8" x2="-2.22" y2="7.65" layer="51"/>
<smd name="3" x="2.54" y="7.225" dx="1.25" dy="3" layer="1" rot="R180"/>
<smd name="2" x="0" y="7.225" dx="1.25" dy="3" layer="1" rot="R180"/>
<smd name="1" x="-2.54" y="7.225" dx="1.25" dy="3" layer="1" rot="R180"/>
<text x="-1.524" y="0.889" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="-1.651" y="-1.27" size="0.6096" layer="27" font="vector" ratio="20">&gt;VALUE</text>
</package>
<package name="1X03_SMD_RA_MALE" urn="urn:adsk.eagle:footprint:37694/1" library_version="1">
<description>&lt;h3&gt;SMD- 3 Pin Right Angle Male Headers&lt;/h3&gt;
No silk outline, but tDocu layer shows pin location. 
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count:3&lt;/li&gt;
&lt;li&gt;Pin pitch:0.1"&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;CONN_03&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<wire x1="3.81" y1="1.25" x2="-3.81" y2="1.25" width="0.1778" layer="51"/>
<wire x1="-3.81" y1="1.25" x2="-3.81" y2="-1.25" width="0.1778" layer="51"/>
<wire x1="3.81" y1="-1.25" x2="2.53" y2="-1.25" width="0.1778" layer="51"/>
<wire x1="2.53" y1="-1.25" x2="-0.01" y2="-1.25" width="0.1778" layer="51"/>
<wire x1="-0.01" y1="-1.25" x2="-2.55" y2="-1.25" width="0.1778" layer="51"/>
<wire x1="-2.55" y1="-1.25" x2="-3.81" y2="-1.25" width="0.1778" layer="51"/>
<wire x1="3.81" y1="-1.25" x2="3.81" y2="1.25" width="0.1778" layer="51"/>
<wire x1="2.53" y1="-1.25" x2="2.53" y2="-7.25" width="0.127" layer="51"/>
<wire x1="-0.01" y1="-1.25" x2="-0.01" y2="-7.25" width="0.127" layer="51"/>
<wire x1="-2.55" y1="-1.25" x2="-2.55" y2="-7.25" width="0.127" layer="51"/>
<rectangle x1="-0.32" y1="4.15" x2="0.32" y2="5.95" layer="51"/>
<rectangle x1="-2.86" y1="4.15" x2="-2.22" y2="5.95" layer="51"/>
<rectangle x1="2.22" y1="4.15" x2="2.86" y2="5.95" layer="51"/>
<smd name="1" x="-2.54" y="5" dx="3" dy="1" layer="1" rot="R90"/>
<smd name="2" x="0" y="5" dx="3" dy="1" layer="1" rot="R90"/>
<smd name="3" x="2.54" y="5" dx="3" dy="1" layer="1" rot="R90"/>
<text x="-1.524" y="0.254" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="-1.651" y="-0.889" size="0.6096" layer="27" font="vector" ratio="20">&gt;VALUE</text>
</package>
<package name="1X03_SMD_RA_MALE_POST" urn="urn:adsk.eagle:footprint:37695/1" library_version="1">
<description>&lt;h3&gt;SMD - 3 Pin Right Angle Male Header w/ Alignment Posts&lt;/h3&gt;
&lt;p&gt;&lt;b&gt;Datasheet referenced for footprint:&lt;/b&gt;&lt;a href="http://www.4uconnector.com/online/object/4udrawing/11026.pdf"&gt; 4UCONN part # 11026 &lt;/a&gt;&lt;/p&gt;
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count:3&lt;/li&gt;
&lt;li&gt;Pin pitch:0.1"&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;CONN_03&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<wire x1="3.81" y1="1.25" x2="-3.81" y2="1.25" width="0.1778" layer="51"/>
<wire x1="-3.81" y1="1.25" x2="-3.81" y2="-1.25" width="0.1778" layer="51"/>
<wire x1="3.81" y1="-1.25" x2="2.53" y2="-1.25" width="0.1778" layer="51"/>
<wire x1="2.53" y1="-1.25" x2="-0.01" y2="-1.25" width="0.1778" layer="51"/>
<wire x1="-0.01" y1="-1.25" x2="-2.55" y2="-1.25" width="0.1778" layer="51"/>
<wire x1="-2.55" y1="-1.25" x2="-3.81" y2="-1.25" width="0.1778" layer="51"/>
<wire x1="3.81" y1="-1.25" x2="3.81" y2="1.25" width="0.1778" layer="51"/>
<wire x1="2.53" y1="-1.25" x2="2.53" y2="-7.25" width="0.127" layer="51"/>
<wire x1="-0.01" y1="-1.25" x2="-0.01" y2="-7.25" width="0.127" layer="51"/>
<wire x1="-2.55" y1="-1.25" x2="-2.55" y2="-7.25" width="0.127" layer="51"/>
<rectangle x1="-0.32" y1="4.15" x2="0.32" y2="5.95" layer="51"/>
<rectangle x1="-2.86" y1="4.15" x2="-2.22" y2="5.95" layer="51"/>
<rectangle x1="2.22" y1="4.15" x2="2.86" y2="5.95" layer="51"/>
<smd name="1" x="-2.54" y="5.07" dx="2.5" dy="1.27" layer="1" rot="R90"/>
<smd name="2" x="0" y="5.07" dx="2.5" dy="1.27" layer="1" rot="R90"/>
<smd name="3" x="2.54" y="5.07" dx="2.5" dy="1.27" layer="1" rot="R90"/>
<hole x="-1.27" y="0" drill="1.6"/>
<hole x="1.27" y="0" drill="1.6"/>
<text x="-1.397" y="1.524" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="-1.651" y="-2.286" size="0.6096" layer="27" font="vector" ratio="20">&gt;VALUE</text>
</package>
<package name="JST-3-PTH-VERT" urn="urn:adsk.eagle:footprint:37696/1" library_version="1">
<description>&lt;h3&gt;JST 3 Pin Vertical Plated Through Hole&lt;/h3&gt;
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count:3&lt;/li&gt;
&lt;li&gt;Pin pitch:2mm&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;&lt;a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”&gt;Datasheet referenced for footprint&lt;/a&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;CONN_03&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<wire x1="-3.95" y1="-2.25" x2="-3.95" y2="2.25" width="0.2032" layer="21"/>
<wire x1="-3.95" y1="2.25" x2="3.95" y2="2.25" width="0.2032" layer="21"/>
<wire x1="3.95" y1="2.25" x2="3.95" y2="-2.25" width="0.2032" layer="21"/>
<wire x1="3.95" y1="-2.25" x2="1" y2="-2.25" width="0.2032" layer="21"/>
<wire x1="-1" y1="-2.25" x2="-3.95" y2="-2.25" width="0.2032" layer="21"/>
<wire x1="-1" y1="-1.75" x2="1" y2="-1.75" width="0.2032" layer="21"/>
<wire x1="1" y1="-1.75" x2="1" y2="-2.25" width="0.2032" layer="21"/>
<wire x1="-1" y1="-1.75" x2="-1" y2="-2.25" width="0.2032" layer="21"/>
<pad name="1" x="-2" y="-0.55" drill="0.7" diameter="1.6"/>
<pad name="2" x="0" y="-0.55" drill="0.7" diameter="1.6"/>
<pad name="3" x="2" y="-0.55" drill="0.7" diameter="1.6"/>
<text x="-2.4" y="0.75" size="1.27" layer="51">+</text>
<text x="-0.4" y="0.75" size="1.27" layer="51">-</text>
<text x="1.7" y="0.95" size="0.8" layer="51">S</text>
<text x="-1.397" y="2.54" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="-1.651" y="-3.302" size="0.6096" layer="27" font="vector" ratio="20">&gt;VALUE</text>
</package>
<package name="1X03_SMD_RA_MALE_POST_SMALLER" urn="urn:adsk.eagle:footprint:37697/1" library_version="1">
<description>&lt;h3&gt;SMD - 3 Pin Right Angle Male Header w/ Alignment Posts&lt;/h3&gt;
&lt;p&gt;&lt;b&gt;Datasheet referenced for footprint:&lt;/b&gt;&lt;a href="http://www.4uconnector.com/online/object/4udrawing/11026.pdf"&gt; 4UCONN part # 11026 &lt;/a&gt;&lt;/p&gt;
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count:3&lt;/li&gt;
&lt;li&gt;Pin pitch:0.1"&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;CONN_03&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<wire x1="3.81" y1="1.25" x2="-3.81" y2="1.25" width="0.1778" layer="51"/>
<wire x1="-3.81" y1="1.25" x2="-3.81" y2="-1.25" width="0.1778" layer="51"/>
<wire x1="3.81" y1="-1.25" x2="2.53" y2="-1.25" width="0.1778" layer="51"/>
<wire x1="2.53" y1="-1.25" x2="-0.01" y2="-1.25" width="0.1778" layer="51"/>
<wire x1="-0.01" y1="-1.25" x2="-2.55" y2="-1.25" width="0.1778" layer="51"/>
<wire x1="-2.55" y1="-1.25" x2="-3.81" y2="-1.25" width="0.1778" layer="51"/>
<wire x1="3.81" y1="-1.25" x2="3.81" y2="1.25" width="0.1778" layer="51"/>
<wire x1="2.53" y1="-1.25" x2="2.53" y2="-7.25" width="0.127" layer="51"/>
<wire x1="-0.01" y1="-1.25" x2="-0.01" y2="-7.25" width="0.127" layer="51"/>
<wire x1="-2.55" y1="-1.25" x2="-2.55" y2="-7.25" width="0.127" layer="51"/>
<rectangle x1="-0.32" y1="4.15" x2="0.32" y2="5.95" layer="51"/>
<rectangle x1="-2.86" y1="4.15" x2="-2.22" y2="5.95" layer="51"/>
<rectangle x1="2.22" y1="4.15" x2="2.86" y2="5.95" layer="51"/>
<smd name="1" x="-2.54" y="5.07" dx="2.5" dy="1.27" layer="1" rot="R90"/>
<smd name="2" x="0" y="5.07" dx="2.5" dy="1.27" layer="1" rot="R90"/>
<smd name="3" x="2.54" y="5.07" dx="2.5" dy="1.27" layer="1" rot="R90"/>
<hole x="-1.27" y="0" drill="1.3589"/>
<hole x="1.27" y="0" drill="1.3589"/>
</package>
<package name="1X03_SMD_RA_MALE_POST_SMALLEST" urn="urn:adsk.eagle:footprint:37698/1" library_version="1">
<wire x1="3.81" y1="1.25" x2="-3.81" y2="1.25" width="0.1778" layer="51"/>
<wire x1="-3.81" y1="1.25" x2="-3.81" y2="-1.25" width="0.1778" layer="51"/>
<wire x1="3.81" y1="-1.25" x2="2.53" y2="-1.25" width="0.1778" layer="51"/>
<wire x1="2.53" y1="-1.25" x2="-0.01" y2="-1.25" width="0.1778" layer="51"/>
<wire x1="-0.01" y1="-1.25" x2="-2.55" y2="-1.25" width="0.1778" layer="51"/>
<wire x1="-2.55" y1="-1.25" x2="-3.81" y2="-1.25" width="0.1778" layer="51"/>
<wire x1="3.81" y1="-1.25" x2="3.81" y2="1.25" width="0.1778" layer="51"/>
<wire x1="2.53" y1="-1.25" x2="2.53" y2="-7.25" width="0.127" layer="51"/>
<wire x1="-0.01" y1="-1.25" x2="-0.01" y2="-7.25" width="0.127" layer="51"/>
<wire x1="-2.55" y1="-1.25" x2="-2.55" y2="-7.25" width="0.127" layer="51"/>
<rectangle x1="-0.32" y1="4.15" x2="0.32" y2="5.95" layer="51"/>
<rectangle x1="-2.86" y1="4.15" x2="-2.22" y2="5.95" layer="51"/>
<rectangle x1="2.22" y1="4.15" x2="2.86" y2="5.95" layer="51"/>
<smd name="1" x="-2.54" y="5.07" dx="2.5" dy="1.27" layer="1" rot="R90"/>
<smd name="2" x="0" y="5.07" dx="2.5" dy="1.27" layer="1" rot="R90"/>
<smd name="3" x="2.54" y="5.07" dx="2.5" dy="1.27" layer="1" rot="R90"/>
<hole x="-1.27" y="0" drill="1.3462"/>
<hole x="1.27" y="0" drill="1.3462"/>
</package>
<package name="JST-3-PTH-NS" urn="urn:adsk.eagle:footprint:37699/1" library_version="1">
<description>&lt;h3&gt;JST 3 Pin Right Angle Plated Through Hole &amp;ndash; NO SILK&lt;/h3&gt;
&lt;p&gt;No silkscreen outline. tDoc layer (51) indicates connector footprint.&lt;/p&gt;
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count:3&lt;/li&gt;
&lt;li&gt;Pin pitch:2mm&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;&lt;a href=”https://www.sparkfun.com/datasheets/Prototyping/ePH.pdf”&gt;Datasheet referenced for footprint&lt;/a&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;CONN_03&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<wire x1="-3.95" y1="-1.6" x2="-3.95" y2="6" width="0.2032" layer="51"/>
<wire x1="-3.95" y1="6" x2="3.95" y2="6" width="0.2032" layer="51"/>
<wire x1="3.95" y1="6" x2="3.95" y2="-1.6" width="0.2032" layer="51"/>
<wire x1="-3.95" y1="-1.6" x2="-3.3" y2="-1.6" width="0.2032" layer="51"/>
<wire x1="3.95" y1="-1.6" x2="3.3" y2="-1.6" width="0.2032" layer="51"/>
<wire x1="-3.3" y1="-1.6" x2="-3.3" y2="0" width="0.2032" layer="51"/>
<wire x1="3.3" y1="-1.6" x2="3.3" y2="0" width="0.2032" layer="51"/>
<pad name="1" x="-2" y="0" drill="0.7" diameter="1.6"/>
<pad name="2" x="0" y="0" drill="0.7" diameter="1.6"/>
<pad name="3" x="2" y="0" drill="0.7" diameter="1.6"/>
<text x="-2.4" y="0.67" size="1.27" layer="51">+</text>
<text x="-0.4" y="0.67" size="1.27" layer="51">-</text>
<text x="1.7" y="0.87" size="0.8" layer="51">S</text>
<text x="-1.397" y="3.429" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="-1.651" y="2.54" size="0.6096" layer="27" font="vector" ratio="20">&gt;VALUE</text>
</package>
<package name="SCREWTERMINAL-3.5MM-3-NS" urn="urn:adsk.eagle:footprint:37700/1" library_version="1">
<description>&lt;h3&gt;Screw Terminal  3.5mm Pitch -3 Pin PTH &amp;ndash; NO SILK&lt;/h3&gt;
&lt;p&gt;No silkscreen outline. tDoc layer (51) indicates connector footprint.&lt;/p&gt;
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count: 3&lt;/li&gt;
&lt;li&gt;Pin pitch: 3.5mm/138mil&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;&lt;a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”&gt;Datasheet referenced for footprint&lt;/a&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;CONN_03&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<wire x1="-1.75" y1="3.4" x2="8.75" y2="3.4" width="0.2032" layer="51"/>
<wire x1="8.75" y1="3.4" x2="8.75" y2="-2.8" width="0.2032" layer="51"/>
<wire x1="8.75" y1="-2.8" x2="8.75" y2="-3.6" width="0.2032" layer="51"/>
<wire x1="8.75" y1="-3.6" x2="-1.75" y2="-3.6" width="0.2032" layer="51"/>
<wire x1="-1.75" y1="-3.6" x2="-1.75" y2="-2.8" width="0.2032" layer="51"/>
<wire x1="-1.75" y1="-2.8" x2="-1.75" y2="3.4" width="0.2032" layer="51"/>
<wire x1="8.75" y1="-2.8" x2="-1.75" y2="-2.8" width="0.2032" layer="51"/>
<wire x1="-1.75" y1="-1.35" x2="-2.25" y2="-1.35" width="0.2032" layer="51"/>
<wire x1="-2.25" y1="-1.35" x2="-2.25" y2="-2.35" width="0.2032" layer="51"/>
<wire x1="-2.25" y1="-2.35" x2="-1.75" y2="-2.35" width="0.2032" layer="51"/>
<wire x1="8.75" y1="3.15" x2="9.25" y2="3.15" width="0.2032" layer="51"/>
<wire x1="9.25" y1="3.15" x2="9.25" y2="2.15" width="0.2032" layer="51"/>
<wire x1="9.25" y1="2.15" x2="8.75" y2="2.15" width="0.2032" layer="51"/>
<pad name="1" x="0" y="0" drill="1.2" diameter="2.413"/>
<pad name="2" x="3.5" y="0" drill="1.2" diameter="2.413"/>
<pad name="3" x="7" y="0" drill="1.2" diameter="2.413"/>
<text x="2.159" y="3.683" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="2.032" y="-4.572" size="0.6096" layer="27" font="vector" ratio="20">&gt;VALUE</text>
</package>
</packages>
<packages3d>
<package3d name="PAD.02X.02" urn="urn:adsk.eagle:package:38284/1" type="box" library_version="1">
<description>Electrically Conductive Pad 0.02" Square
Used as a test point connection for pogo pins or other debugging tools. 
Specifications:
Area: 0.02" x 0.02"

Example device(s):
TEST_POINT
</description>
<packageinstances>
<packageinstance name="PAD.02X.02"/>
</packageinstances>
</package3d>
<package3d name="PAD.03X.03" urn="urn:adsk.eagle:package:38286/1" type="box" library_version="1">
<description>Electrically Conductive Pad 0.03" Circle
Used as a test point connection for pogo pins or other debugging tools. 
Specifications:
Area: 0.03" x 0.03"

Example device(s):
TEST_POINT
</description>
<packageinstances>
<packageinstance name="PAD.03X.03"/>
</packageinstances>
</package3d>
<package3d name="PAD.03X.05" urn="urn:adsk.eagle:package:38285/1" type="box" library_version="1">
<description>Electrically Conductive Pad 0.05" Circle
Used as a test point connection for pogo pins or other debugging tools. 
Specifications:
Area: 0.05" x 0.05"

Example device(s):
TEST_POINT
</description>
<packageinstances>
<packageinstance name="PAD.03X.05"/>
</packageinstances>
</package3d>
<package3d name="PAD.03X.04" urn="urn:adsk.eagle:package:38287/1" type="box" library_version="1">
<description>Electrically Conductive Pad 0.04" Circle
Used as a test point connection for pogo pins or other debugging tools. 
Specifications:
Area: 0.04" x 0.04"

Example device(s):
TEST_POINT
</description>
<packageinstances>
<packageinstance name="PAD.03X.04"/>
</packageinstances>
</package3d>
<package3d name="TP_15TH" urn="urn:adsk.eagle:package:38288/1" type="box" library_version="1">
<description>Electrically Conductive Via 0.015" Drill
Used as a test point connection for pogo pins or other debugging tools. 
Specifications:
Area:0.015"

Example device(s):
TEST_POINT
</description>
<packageinstances>
<packageinstance name="TP_15TH"/>
</packageinstances>
</package3d>
<package3d name="1X03" urn="urn:adsk.eagle:package:38063/1" type="box" library_version="1">
<description>Plated Through Hole - 3 Pin
Specifications:
Pin count:3
Pin pitch:0.1"

Example device(s):
CONN_03
</description>
<packageinstances>
<packageinstance name="1X03"/>
</packageinstances>
</package3d>
<package3d name="MOLEX-1X3" urn="urn:adsk.eagle:package:38064/1" type="box" library_version="1">
<description>PTH - 3 Pin Vertical Molex Polarized Header
Datasheet referenced for footprint: 4UCONN part # 01932 
Specifications:
Pin count:3
Pin pitch:0.1"

Example device(s):
CONN_03
</description>
<packageinstances>
<packageinstance name="MOLEX-1X3"/>
</packageinstances>
</package3d>
<package3d name="SCREWTERMINAL-3.5MM-3" urn="urn:adsk.eagle:package:38072/1" type="box" library_version="1">
<description>Screw Terminal  3.5mm Pitch -3 Pin PTH
Specifications:
Pin count: 3
Pin pitch: 3.5mm/138mil

Datasheet referenced for footprint
Example device(s):
CONN_03
</description>
<packageinstances>
<packageinstance name="SCREWTERMINAL-3.5MM-3"/>
</packageinstances>
</package3d>
<package3d name="1X03_LOCK" urn="urn:adsk.eagle:package:38071/1" type="box" library_version="1">
<description>Plated Through Hole - 3 Pin Locking Footprint
Pins are staggered 0.005" off center to lock pins while soldering. 
Specifications:
Pin count:3
Pin pitch:0.1"

Example device(s):
CONN_03
</description>
<packageinstances>
<packageinstance name="1X03_LOCK"/>
</packageinstances>
</package3d>
<package3d name="1X03_LOCK_LONGPADS" urn="urn:adsk.eagle:package:38065/1" type="box" library_version="1">
<description>Plated Through Hole - 3 Pin Long Pad w/ Locking Footprint
Holes are offset 0.005" from center to lock pins in place while soldering. 
Specifications:
Pin count:3
Pin pitch:0.1"

Example device(s):
CONN_03
</description>
<packageinstances>
<packageinstance name="1X03_LOCK_LONGPADS"/>
</packageinstances>
</package3d>
<package3d name="MOLEX-1X3_LOCK" urn="urn:adsk.eagle:package:38067/1" type="box" library_version="1">
<description>PTH - 3 Pin Vertical Molex Polarized Header
Pins are offset 0.005" from center to lock pins in place during soldering. 
Datasheet referenced for footprint: 4UCONN part # 01932 
Specifications:
Pin count:3
Pin pitch:0.1"

Example device(s):
CONN_03
</description>
<packageinstances>
<packageinstance name="MOLEX-1X3_LOCK"/>
</packageinstances>
</package3d>
<package3d name="SCREWTERMINAL-3.5MM-3_LOCK.007S" urn="urn:adsk.eagle:package:38066/1" type="box" library_version="1">
<description>Screw Terminal  3.5mm Pitch -3 Pin PTH Locking
Holes are offset 0.007" from center to hold pins in place during soldering. 
Specifications:
Pin count: 3
Pin pitch: 3.5mm/138mil

Datasheet referenced for footprint
Example device(s):
CONN_03
</description>
<packageinstances>
<packageinstance name="SCREWTERMINAL-3.5MM-3_LOCK.007S"/>
</packageinstances>
</package3d>
<package3d name="1X03_NO_SILK" urn="urn:adsk.eagle:package:38076/1" type="box" library_version="1">
<description>Plated Through Hole - 3 Pin No Silk Outline
Specifications:
Pin count:3
Pin pitch:0.1"

Example device(s):
CONN_03
</description>
<packageinstances>
<packageinstance name="1X03_NO_SILK"/>
</packageinstances>
</package3d>
<package3d name="1X03_LONGPADS" urn="urn:adsk.eagle:package:38068/1" type="box" library_version="1">
<description>Plated Through Hole - 3 Pin Long Pads
Specifications:
Pin count:3
Pin pitch:0.1"

Example device(s):
CONN_03
</description>
<packageinstances>
<packageinstance name="1X03_LONGPADS"/>
</packageinstances>
</package3d>
<package3d name="JST-3-PTH" urn="urn:adsk.eagle:package:38069/1" type="box" library_version="1">
<description>JST 3 Pin Right Angle Plated Through Hole
Specifications:
Pin count:3
Pin pitch:2mm

Datasheet referenced for footprint
Example device(s):
CONN_03
</description>
<packageinstances>
<packageinstance name="JST-3-PTH"/>
</packageinstances>
</package3d>
<package3d name="1X03_PP_HOLES_ONLY" urn="urn:adsk.eagle:package:38073/1" type="box" library_version="1">
<description>Pogo Pins - 3 Pin
Specifications:
Pin count:3

Example device(s):
CONN_03
</description>
<packageinstances>
<packageinstance name="1X03_PP_HOLES_ONLY"/>
</packageinstances>
</package3d>
<package3d name="SCREWTERMINAL-5MM-3" urn="urn:adsk.eagle:package:38070/1" type="box" library_version="1">
<description>Screw Terminal  5mm Pitch -3 Pin PTH
Specifications:
Pin count: 3
Pin pitch: 5mm/197mil

Datasheet referenced for footprint
Example device(s):
CONN_03
</description>
<packageinstances>
<packageinstance name="SCREWTERMINAL-5MM-3"/>
</packageinstances>
</package3d>
<package3d name="1X03_LOCK_NO_SILK" urn="urn:adsk.eagle:package:38074/1" type="box" library_version="1">
<description>Plated Through Hole - 3 Pin Locking Footprint w/out Silk Outline
Holes are offset from center 0.005" to lock pins in place while soldering. 
Specifications:
Pin count:3
Pin pitch:0.1"

Example device(s):
CONN_03
</description>
<packageinstances>
<packageinstance name="1X03_LOCK_NO_SILK"/>
</packageinstances>
</package3d>
<package3d name="JST-3-SMD" urn="urn:adsk.eagle:package:38075/1" type="box" library_version="1">
<description>JST 3 Pin Right Angle SMT
Specifications:
Pin count:3
Pin pitch:2mm

Example device(s):
CONN_03
</description>
<packageinstances>
<packageinstance name="JST-3-SMD"/>
</packageinstances>
</package3d>
<package3d name="1X03-1MM-RA" urn="urn:adsk.eagle:package:38077/1" type="box" library_version="1">
<description>Plated Through Hole - 3 Pin SMD
Specifications:
Pin count:3

Example device(s):
CONN_03
</description>
<packageinstances>
<packageinstance name="1X03-1MM-RA"/>
</packageinstances>
</package3d>
<package3d name="1X03_SMD_RA_FEMALE" urn="urn:adsk.eagle:package:38081/1" type="box" library_version="1">
<description>SMD - 3 Pin Right Angle Female Header
Silk outline of pin location
Specifications:
Pin count:3
Pin pitch:0.1"

Example device(s):
CONN_03
</description>
<packageinstances>
<packageinstance name="1X03_SMD_RA_FEMALE"/>
</packageinstances>
</package3d>
<package3d name="1X03_SMD_RA_MALE" urn="urn:adsk.eagle:package:38078/1" type="box" library_version="1">
<description>SMD- 3 Pin Right Angle Male Headers
No silk outline, but tDocu layer shows pin location. 
Specifications:
Pin count:3
Pin pitch:0.1"

Example device(s):
CONN_03
</description>
<packageinstances>
<packageinstance name="1X03_SMD_RA_MALE"/>
</packageinstances>
</package3d>
<package3d name="1X03_SMD_RA_MALE_POST" urn="urn:adsk.eagle:package:38079/1" type="box" library_version="1">
<description>SMD - 3 Pin Right Angle Male Header w/ Alignment Posts
Datasheet referenced for footprint: 4UCONN part # 11026 
Specifications:
Pin count:3
Pin pitch:0.1"

Example device(s):
CONN_03
</description>
<packageinstances>
<packageinstance name="1X03_SMD_RA_MALE_POST"/>
</packageinstances>
</package3d>
<package3d name="JST-3-PTH-VERT" urn="urn:adsk.eagle:package:38080/1" type="box" library_version="1">
<description>JST 3 Pin Vertical Plated Through Hole
Specifications:
Pin count:3
Pin pitch:2mm

Datasheet referenced for footprint
Example device(s):
CONN_03
</description>
<packageinstances>
<packageinstance name="JST-3-PTH-VERT"/>
</packageinstances>
</package3d>
<package3d name="1X03_SMD_RA_MALE_POST_SMALLER" urn="urn:adsk.eagle:package:38082/1" type="box" library_version="1">
<description>SMD - 3 Pin Right Angle Male Header w/ Alignment Posts
Datasheet referenced for footprint: 4UCONN part # 11026 
Specifications:
Pin count:3
Pin pitch:0.1"

Example device(s):
CONN_03
</description>
<packageinstances>
<packageinstance name="1X03_SMD_RA_MALE_POST_SMALLER"/>
</packageinstances>
</package3d>
<package3d name="1X03_SMD_RA_MALE_POST_SMALLEST" urn="urn:adsk.eagle:package:38083/1" type="box" library_version="1">
<packageinstances>
<packageinstance name="1X03_SMD_RA_MALE_POST_SMALLEST"/>
</packageinstances>
</package3d>
<package3d name="JST-3-PTH-NS" urn="urn:adsk.eagle:package:38084/1" type="box" library_version="1">
<description>JST 3 Pin Right Angle Plated Through Hole &amp;ndash; NO SILK
No silkscreen outline. tDoc layer (51) indicates connector footprint.
Specifications:
Pin count:3
Pin pitch:2mm

Datasheet referenced for footprint
Example device(s):
CONN_03
</description>
<packageinstances>
<packageinstance name="JST-3-PTH-NS"/>
</packageinstances>
</package3d>
<package3d name="SCREWTERMINAL-3.5MM-3-NS" urn="urn:adsk.eagle:package:38088/1" type="box" library_version="1">
<description>Screw Terminal  3.5mm Pitch -3 Pin PTH &amp;ndash; NO SILK
No silkscreen outline. tDoc layer (51) indicates connector footprint.
Specifications:
Pin count: 3
Pin pitch: 3.5mm/138mil

Datasheet referenced for footprint
Example device(s):
CONN_03
</description>
<packageinstances>
<packageinstance name="SCREWTERMINAL-3.5MM-3-NS"/>
</packageinstances>
</package3d>
</packages3d>
<symbols>
<symbol name="TEST-POINT" urn="urn:adsk.eagle:symbol:37958/1" library_version="1">
<wire x1="2.54" y1="0" x2="0" y2="0" width="0.1524" layer="94"/>
<wire x1="3.302" y1="0.762" x2="3.302" y2="-0.762" width="0.1524" layer="94" curve="180"/>
<text x="-2.54" y="2.54" size="1.778" layer="95" font="vector">&gt;Name</text>
<text x="-2.54" y="-2.54" size="1.778" layer="96" font="vector">&gt;Value</text>
<pin name="1" x="0" y="0" visible="off" length="point" rot="R180"/>
</symbol>
<symbol name="CONN_03" urn="urn:adsk.eagle:symbol:37677/1" library_version="1">
<description>&lt;h3&gt;3 Pin Connection&lt;/h3&gt;</description>
<wire x1="3.81" y1="-5.08" x2="-2.54" y2="-5.08" width="0.4064" layer="94"/>
<wire x1="1.27" y1="2.54" x2="2.54" y2="2.54" width="0.6096" layer="94"/>
<wire x1="1.27" y1="0" x2="2.54" y2="0" width="0.6096" layer="94"/>
<wire x1="1.27" y1="-2.54" x2="2.54" y2="-2.54" width="0.6096" layer="94"/>
<wire x1="-2.54" y1="5.08" x2="-2.54" y2="-5.08" width="0.4064" layer="94"/>
<wire x1="3.81" y1="-5.08" x2="3.81" y2="5.08" width="0.4064" layer="94"/>
<wire x1="-2.54" y1="5.08" x2="3.81" y2="5.08" width="0.4064" layer="94"/>
<text x="-2.54" y="-7.366" size="1.778" layer="96" font="vector">&gt;VALUE</text>
<text x="-2.54" y="5.588" size="1.778" layer="95" font="vector">&gt;NAME</text>
<pin name="1" x="7.62" y="-2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
<pin name="2" x="7.62" y="0" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
<pin name="3" x="7.62" y="2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
</symbol>
</symbols>
<devicesets>
<deviceset name="TEST-POINT" urn="urn:adsk.eagle:component:38391/1" prefix="TP" library_version="1">
<description>&lt;h3&gt;SparkFun Test Points&lt;/h3&gt;
&lt;p&gt;Bare copper test points for troubleshooting or In-Circuit-Testing. These are used by our Production team for verifying production board runs using pogo-pins on test beds.&lt;/p&gt;
&lt;p&gt;&lt;b&gt;SparkFun Products:&lt;/b&gt;
&lt;ul&gt;&lt;li&gt;&lt;a href=”https://www.sparkfun.com/products/13284”&gt;SparkFun LSM9DS1 Breakout&lt;/a&gt;&lt;/li&gt;
&lt;li&gt;&lt;a href=”https://www.sparkfun.com/products/13714”&gt;SparkFun PSOC&lt;/a&gt;&lt;/li&gt;
&lt;li&gt;&lt;a href="https://www.sparkfun.com/products/13879"&gt;SparkFun Load Cell Amplifier&lt;/a&gt;&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<gates>
<gate name="G$1" symbol="TEST-POINT" x="0" y="0"/>
</gates>
<devices>
<device name="2" package="PAD.02X.02">
<connects>
<connect gate="G$1" pin="1" pad="P$1"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38284/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="3" package="PAD.03X.03">
<connects>
<connect gate="G$1" pin="1" pad="P$1"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38286/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="3X5" package="PAD.03X.05">
<connects>
<connect gate="G$1" pin="1" pad="P$1"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38285/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="3X4" package="PAD.03X.04">
<connects>
<connect gate="G$1" pin="1" pad="P$1"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38287/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="TP_15TH_THRU" package="TP_15TH">
<connects>
<connect gate="G$1" pin="1" pad="P$1"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38288/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
<deviceset name="CONN_03" urn="urn:adsk.eagle:component:38324/1" prefix="J" uservalue="yes" library_version="1">
<description>&lt;h3&gt;Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections&lt;/h3&gt;

&lt;p&gt;&lt;/p&gt;
&lt;b&gt;On any of the 0.1 inch spaced packages, you can populate with these:&lt;/b&gt;
&lt;ul&gt;
&lt;li&gt;&lt;a href="https://www.sparkfun.com/products/116"&gt; Break Away Headers - Straight&lt;/a&gt; (PRT-00116)&lt;/li&gt;
&lt;li&gt;&lt;a href="https://www.sparkfun.com/products/553"&gt; Break Away Male Headers - Right Angle&lt;/a&gt; (PRT-00553)&lt;/li&gt;
&lt;li&gt;&lt;a href="https://www.sparkfun.com/products/115"&gt; Female Headers&lt;/a&gt; (PRT-00115)&lt;/li&gt;
&lt;li&gt;&lt;a href="https://www.sparkfun.com/products/117"&gt; Break Away Headers - Machine Pin&lt;/a&gt; (PRT-00117)&lt;/li&gt;
&lt;li&gt;&lt;a href="https://www.sparkfun.com/products/743"&gt; Break Away Female Headers - Swiss Machine Pin&lt;/a&gt; (PRT-00743)&lt;/li&gt;
&lt;li&gt;&lt;a href="https://www.sparkfun.com/products/13875"&gt; Stackable Header - 3 Pin (Female, 0.1")&lt;/a&gt; (PRT-13875)&lt;/li&gt;
&lt;/ul&gt;

&lt;p&gt;&lt;/p&gt;
&lt;b&gt; For SCREWTERMINALS and SPRING TERMINALS visit here:&lt;/b&gt;
&lt;ul&gt;
&lt;li&gt;&lt;a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"&gt; Screw Terimnals on SparkFun.com&lt;/a&gt; (5mm/3.5mm/2.54mm spacing)&lt;/li&gt;
&lt;/ul&gt;

&lt;p&gt;&lt;/p&gt;
&lt;b&gt;This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.&lt;/b&gt;
&lt;ul&gt;
&lt;li&gt;&lt;a href="https://www.sparkfun.com/products/11375"&gt; Hook-Up Wire - Assortment (Stranded, 22 AWG)&lt;/a&gt; (PRT-11375)&lt;/li&gt;
&lt;li&gt;&lt;a href="https://www.sparkfun.com/products/11367"&gt; Hook-Up Wire - Assortment (Solid Core, 22 AWG)&lt;/a&gt; (PRT-11367)&lt;/li&gt;
&lt;li&gt;&lt;a href="https://www.sparkfun.com/categories/141"&gt; View the entire wire category on our website here&lt;/a&gt;&lt;/li&gt;
&lt;p&gt;&lt;/p&gt;
&lt;/ul&gt;

&lt;p&gt;&lt;/p&gt;
&lt;b&gt;Special notes:&lt;/b&gt;
&lt;p&gt; &lt;/p&gt;
&lt;p&gt; &lt;/p&gt; Molex polarized connector foot print use with SKU : PRT-08232 with associated crimp pins and housings.</description>
<gates>
<gate name="J$1" symbol="CONN_03" x="-2.54" y="0"/>
</gates>
<devices>
<device name="" package="1X03">
<connects>
<connect gate="J$1" pin="1" pad="1"/>
<connect gate="J$1" pin="2" pad="2"/>
<connect gate="J$1" pin="3" pad="3"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38063/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="POLAR" package="MOLEX-1X3">
<connects>
<connect gate="J$1" pin="1" pad="1"/>
<connect gate="J$1" pin="2" pad="2"/>
<connect gate="J$1" pin="3" pad="3"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38064/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-08625" constant="no"/>
<attribute name="SF_ID" value="PRT-08096" constant="no"/>
</technology>
</technologies>
</device>
<device name="SCREW" package="SCREWTERMINAL-3.5MM-3">
<connects>
<connect gate="J$1" pin="1" pad="1"/>
<connect gate="J$1" pin="2" pad="2"/>
<connect gate="J$1" pin="3" pad="3"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38072/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-08288" constant="no"/>
<attribute name="SF_ID" value="PRT-08235" constant="no"/>
</technology>
</technologies>
</device>
<device name="LOCK" package="1X03_LOCK">
<connects>
<connect gate="J$1" pin="1" pad="1"/>
<connect gate="J$1" pin="2" pad="2"/>
<connect gate="J$1" pin="3" pad="3"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38071/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="LOCK_LONGPADS" package="1X03_LOCK_LONGPADS">
<connects>
<connect gate="J$1" pin="1" pad="1"/>
<connect gate="J$1" pin="2" pad="2"/>
<connect gate="J$1" pin="3" pad="3"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38065/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="POLAR_LOCK" package="MOLEX-1X3_LOCK">
<connects>
<connect gate="J$1" pin="1" pad="1"/>
<connect gate="J$1" pin="2" pad="2"/>
<connect gate="J$1" pin="3" pad="3"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38067/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-08625" constant="no"/>
<attribute name="SF_ID" value="PRT-08096" constant="no"/>
</technology>
</technologies>
</device>
<device name="SCREW_LOCK" package="SCREWTERMINAL-3.5MM-3_LOCK.007S">
<connects>
<connect gate="J$1" pin="1" pad="1"/>
<connect gate="J$1" pin="2" pad="2"/>
<connect gate="J$1" pin="3" pad="3"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38066/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-08288" constant="no"/>
<attribute name="SF_ID" value="PRT-08235" constant="no"/>
</technology>
</technologies>
</device>
<device name="1X03_NO_SILK" package="1X03_NO_SILK">
<connects>
<connect gate="J$1" pin="1" pad="1"/>
<connect gate="J$1" pin="2" pad="2"/>
<connect gate="J$1" pin="3" pad="3"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38076/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="LONGPADS" package="1X03_LONGPADS">
<connects>
<connect gate="J$1" pin="1" pad="1"/>
<connect gate="J$1" pin="2" pad="2"/>
<connect gate="J$1" pin="3" pad="3"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38068/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="JST-PTH" package="JST-3-PTH">
<connects>
<connect gate="J$1" pin="1" pad="1"/>
<connect gate="J$1" pin="2" pad="2"/>
<connect gate="J$1" pin="3" pad="3"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38069/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="WIRE-10037" constant="no"/>
<attribute name="SF_ID" value="PRT-09915" constant="no"/>
</technology>
</technologies>
</device>
<device name="POGO_PIN_HOLES_ONLY" package="1X03_PP_HOLES_ONLY">
<connects>
<connect gate="J$1" pin="1" pad="1"/>
<connect gate="J$1" pin="2" pad="2"/>
<connect gate="J$1" pin="3" pad="3"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38073/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="-SCREW-5MM" package="SCREWTERMINAL-5MM-3">
<connects>
<connect gate="J$1" pin="1" pad="1"/>
<connect gate="J$1" pin="2" pad="2"/>
<connect gate="J$1" pin="3" pad="3"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38070/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-10134" constant="no"/>
<attribute name="SF_SKU" value="PRT-08433" constant="no"/>
</technology>
</technologies>
</device>
<device name="LOCK_NO_SILK" package="1X03_LOCK_NO_SILK">
<connects>
<connect gate="J$1" pin="1" pad="1"/>
<connect gate="J$1" pin="2" pad="2"/>
<connect gate="J$1" pin="3" pad="3"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38074/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="JST-SMD" package="JST-3-SMD">
<connects>
<connect gate="J$1" pin="1" pad="1"/>
<connect gate="J$1" pin="2" pad="2"/>
<connect gate="J$1" pin="3" pad="3"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38075/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-12591" constant="no"/>
<attribute name="VALUE" value="3-PIN SMD" constant="no"/>
</technology>
</technologies>
</device>
<device name="SMD" package="1X03-1MM-RA">
<connects>
<connect gate="J$1" pin="1" pad="1"/>
<connect gate="J$1" pin="2" pad="2"/>
<connect gate="J$1" pin="3" pad="3"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38077/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="SMD_RA_FEMALE" package="1X03_SMD_RA_FEMALE">
<connects>
<connect gate="J$1" pin="1" pad="1"/>
<connect gate="J$1" pin="2" pad="2"/>
<connect gate="J$1" pin="3" pad="3"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38081/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-10926"/>
<attribute name="VALUE" value="1x3 RA Female .1&quot;"/>
</technology>
</technologies>
</device>
<device name="SMD_RA_MALE" package="1X03_SMD_RA_MALE">
<connects>
<connect gate="J$1" pin="1" pad="1"/>
<connect gate="J$1" pin="2" pad="2"/>
<connect gate="J$1" pin="3" pad="3"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38078/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-10925"/>
</technology>
</technologies>
</device>
<device name="SMD_RA_MALE_POST" package="1X03_SMD_RA_MALE_POST">
<connects>
<connect gate="J$1" pin="1" pad="1"/>
<connect gate="J$1" pin="2" pad="2"/>
<connect gate="J$1" pin="3" pad="3"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38079/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="JST-PTH-VERT" package="JST-3-PTH-VERT">
<connects>
<connect gate="J$1" pin="1" pad="1"/>
<connect gate="J$1" pin="2" pad="2"/>
<connect gate="J$1" pin="3" pad="3"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38080/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-13230" constant="no"/>
</technology>
</technologies>
</device>
<device name="1X03_SMD_RA_MALE_POST_SMALLER" package="1X03_SMD_RA_MALE_POST_SMALLER">
<connects>
<connect gate="J$1" pin="1" pad="1"/>
<connect gate="J$1" pin="2" pad="2"/>
<connect gate="J$1" pin="3" pad="3"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38082/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-11912" constant="no"/>
</technology>
</technologies>
</device>
<device name="1X03_SMD_RA_MALE_POST_SMALLEST" package="1X03_SMD_RA_MALE_POST_SMALLEST">
<connects>
<connect gate="J$1" pin="1" pad="1"/>
<connect gate="J$1" pin="2" pad="2"/>
<connect gate="J$1" pin="3" pad="3"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38083/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="JST-PTH-NS" package="JST-3-PTH-NS">
<connects>
<connect gate="J$1" pin="1" pad="1"/>
<connect gate="J$1" pin="2" pad="2"/>
<connect gate="J$1" pin="3" pad="3"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38084/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="SCREW-NS" package="SCREWTERMINAL-3.5MM-3-NS">
<connects>
<connect gate="J$1" pin="1" pad="1"/>
<connect gate="J$1" pin="2" pad="2"/>
<connect gate="J$1" pin="3" pad="3"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38088/1"/>
</package3dinstances>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
</devicesets>
</library>
<library name="DS3231">
<packages>
<package name="SO16W">
<description>&lt;b&gt;SMALL OUTLINE INTEGRATED CIRCUIT&lt;/b&gt;&lt;p&gt;
wide body 7.5 mm/JEDEC MS-013AA</description>
<wire x1="-5.395" y1="5.9" x2="5.395" y2="5.9" width="0.1998" layer="39"/>
<wire x1="5.395" y1="-5.9" x2="-5.395" y2="-5.9" width="0.1998" layer="39"/>
<wire x1="-5.395" y1="-5.9" x2="-5.395" y2="5.9" width="0.1998" layer="39"/>
<wire x1="5.19" y1="-3.7" x2="-5.19" y2="-3.7" width="0.2032" layer="51"/>
<wire x1="-5.19" y1="-3.7" x2="-5.19" y2="-3.2" width="0.2032" layer="51"/>
<wire x1="-5.19" y1="-3.2" x2="-5.19" y2="3.7" width="0.2032" layer="51"/>
<wire x1="-5.19" y1="3.7" x2="5.19" y2="3.7" width="0.2032" layer="51"/>
<wire x1="5.19" y1="-3.2" x2="-5.19" y2="-3.2" width="0.2032" layer="51"/>
<wire x1="5.19" y1="3.7" x2="5.19" y2="-3.2" width="0.2032" layer="51"/>
<wire x1="5.19" y1="-3.2" x2="5.19" y2="-3.7" width="0.2032" layer="51"/>
<wire x1="5.395" y1="5.9" x2="5.395" y2="-5.9" width="0.1998" layer="39"/>
<text x="-4.451009375" y="1.271709375" size="1.271709375" layer="25">&gt;NAME</text>
<text x="-4.45481875" y="-2.545609375" size="1.272809375" layer="27">&gt;VALUE</text>
<rectangle x1="-4.697340625" y1="-5.328209375" x2="-4.1999" y2="-3.8001" layer="51"/>
<rectangle x1="-3.431309375" y1="-5.337440625" x2="-2.9299" y2="-3.8001" layer="51"/>
<rectangle x1="-2.15623125" y1="-5.33516875" x2="-1.6599" y2="-3.8001" layer="51"/>
<rectangle x1="-0.88128125" y1="-5.32713125" x2="-0.3899" y2="-3.8001" layer="51"/>
<rectangle x1="0.3910875" y1="-5.33623125" x2="0.8801" y2="-3.8001" layer="51"/>
<rectangle x1="1.66623125" y1="-5.3403" x2="2.1501" y2="-3.8001" layer="51"/>
<rectangle x1="2.93815" y1="-5.33496875" x2="3.4201" y2="-3.8001" layer="51"/>
<rectangle x1="4.20775" y1="-5.32995" x2="4.6901" y2="-3.8001" layer="51"/>
<rectangle x1="4.20731875" y1="3.806809375" x2="4.6901" y2="5.32" layer="51"/>
<rectangle x1="2.93878125" y1="3.81161875" x2="3.4201" y2="5.32" layer="51"/>
<rectangle x1="1.66336875" y1="3.808040625" x2="2.1501" y2="5.32" layer="51"/>
<rectangle x1="0.390334375" y1="3.80433125" x2="0.8801" y2="5.32" layer="51"/>
<rectangle x1="-0.882565625" y1="3.81075" x2="-0.3899" y2="5.32" layer="51"/>
<rectangle x1="-2.15741875" y1="3.813040625" x2="-1.6599" y2="5.32" layer="51"/>
<rectangle x1="-3.42846875" y1="3.8094" x2="-2.9299" y2="5.32" layer="51"/>
<rectangle x1="-4.700759375" y1="3.808740625" x2="-4.1999" y2="5.32" layer="51"/>
<smd name="2" x="-3.175" y="-4.6" dx="0.6" dy="2.2" layer="1"/>
<smd name="13" x="-0.635" y="4.6" dx="0.6" dy="2.2" layer="1"/>
<smd name="1" x="-4.445" y="-4.6" dx="0.6" dy="2.2" layer="1"/>
<smd name="3" x="-1.905" y="-4.6" dx="0.6" dy="2.2" layer="1"/>
<smd name="4" x="-0.635" y="-4.6" dx="0.6" dy="2.2" layer="1"/>
<smd name="14" x="-1.905" y="4.6" dx="0.6" dy="2.2" layer="1"/>
<smd name="12" x="0.635" y="4.6" dx="0.6" dy="2.2" layer="1"/>
<smd name="11" x="1.905" y="4.6" dx="0.6" dy="2.2" layer="1"/>
<smd name="6" x="1.905" y="-4.6" dx="0.6" dy="2.2" layer="1"/>
<smd name="9" x="4.445" y="4.6" dx="0.6" dy="2.2" layer="1"/>
<smd name="5" x="0.635" y="-4.6" dx="0.6" dy="2.2" layer="1"/>
<smd name="7" x="3.175" y="-4.6" dx="0.6" dy="2.2" layer="1"/>
<smd name="10" x="3.175" y="4.6" dx="0.6" dy="2.2" layer="1"/>
<smd name="8" x="4.445" y="-4.6" dx="0.6" dy="2.2" layer="1"/>
<smd name="15" x="-3.175" y="4.6" dx="0.6" dy="2.2" layer="1"/>
<smd name="16" x="-4.445" y="4.6" dx="0.6" dy="2.2" layer="1"/>
</package>
</packages>
<symbols>
<symbol name="DS3231">
<wire x1="-10.16" y1="12.7" x2="10.16" y2="12.7" width="0.254" layer="94"/>
<wire x1="10.16" y1="12.7" x2="10.16" y2="-10.16" width="0.254" layer="94"/>
<wire x1="10.16" y1="-10.16" x2="-10.16" y2="-10.16" width="0.254" layer="94"/>
<wire x1="-10.16" y1="-10.16" x2="-10.16" y2="12.7" width="0.254" layer="94"/>
<text x="-10.178" y="-12.7226" size="1.781159375" layer="96">DS3231</text>
<text x="10.1742" y="15.2614" size="1.780490625" layer="95" rot="R180">&gt;NAME</text>
<pin name="SCL" x="15.24" y="10.16" length="middle" rot="R180"/>
<pin name="SDA" x="15.24" y="7.62" length="middle" rot="R180"/>
<pin name="/RST" x="-15.24" y="2.54" length="middle" direction="pas" function="dot"/>
<pin name="VBAT" x="15.24" y="5.08" length="middle" direction="pwr" rot="R180"/>
<pin name="32KHZ" x="-15.24" y="10.16" length="middle" direction="out"/>
<pin name="SQW/INT" x="-15.24" y="5.08" length="middle" direction="out"/>
<pin name="VCC" x="-15.24" y="7.62" length="middle" direction="pwr"/>
<pin name="GND" x="15.24" y="2.54" length="middle" direction="pwr" rot="R180"/>
<pin name="NC" x="-15.24" y="0" length="middle" direction="nc"/>
<pin name="NC1" x="-15.24" y="-2.54" length="middle" direction="nc"/>
<pin name="NC2" x="-15.24" y="-5.08" length="middle" direction="nc"/>
<pin name="NC3" x="-15.24" y="-7.62" length="middle" direction="nc"/>
<pin name="NC4" x="15.24" y="-7.62" length="middle" direction="nc" rot="R180"/>
<pin name="NC5" x="15.24" y="-5.08" length="middle" direction="nc" rot="R180"/>
<pin name="NC6" x="15.24" y="-2.54" length="middle" direction="nc" rot="R180"/>
<pin name="NC7" x="15.24" y="0" length="middle" direction="nc" rot="R180"/>
</symbol>
</symbols>
<devicesets>
<deviceset name="DS3231" prefix="IC">
<gates>
<gate name="G$1" symbol="DS3231" x="0" y="0"/>
</gates>
<devices>
<device name="/SO" package="SO16W">
<connects>
<connect gate="G$1" pin="/RST" pad="4"/>
<connect gate="G$1" pin="32KHZ" pad="1"/>
<connect gate="G$1" pin="GND" pad="13"/>
<connect gate="G$1" pin="NC" pad="5"/>
<connect gate="G$1" pin="NC1" pad="6"/>
<connect gate="G$1" pin="NC2" pad="7"/>
<connect gate="G$1" pin="NC3" pad="8"/>
<connect gate="G$1" pin="NC4" pad="9"/>
<connect gate="G$1" pin="NC5" pad="10"/>
<connect gate="G$1" pin="NC6" pad="11"/>
<connect gate="G$1" pin="NC7" pad="12"/>
<connect gate="G$1" pin="SCL" pad="16"/>
<connect gate="G$1" pin="SDA" pad="15"/>
<connect gate="G$1" pin="SQW/INT" pad="3"/>
<connect gate="G$1" pin="VBAT" pad="14"/>
<connect gate="G$1" pin="VCC" pad="2"/>
</connects>
<technologies>
<technology name="">
<attribute name="AVAILABILITY" value="Unavailable"/>
<attribute name="DESCRIPTION" value=" "/>
<attribute name="MF" value="Maxim Integrated"/>
<attribute name="MP" value="DS3231"/>
<attribute name="PACKAGE" value="SOIC-16 Maxim Integrated"/>
<attribute name="PRICE" value="None"/>
</technology>
</technologies>
</device>
</devices>
</deviceset>
</devicesets>
</library>
<library name="SparkFun-Batteries">
<description>&lt;h3&gt;SparkFun Batteries&lt;/h3&gt;
This library contains battery clips, connectors, and appropriately sized silk outlines for LiPo batteries. 
&lt;br&gt;
&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is &lt;b&gt; the end user's responsibility&lt;/b&gt; to ensure correctness and suitablity for a given componet or application. 
&lt;br&gt;
&lt;br&gt;If you enjoy using this library, please buy one of our products at &lt;a href=" www.sparkfun.com"&gt;SparkFun.com&lt;/a&gt;.
&lt;br&gt;
&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;
&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="BATTERY-AAA">
<description>&lt;h3&gt;AAA Battery Clips&lt;/h3&gt;
&lt;p&gt;PCB mount clips properly spaced to hold a AAA battery.&lt;/p&gt;
&lt;p&gt;&lt;a href="http://cdn.sparkfun.com/datasheets/Prototyping/M60-2p9.pdf"&gt;Datasheet&lt;/a&gt;&lt;/p&gt;
&lt;h4&gt;Devices Using&lt;/h4&gt;
&lt;ul&gt;&lt;li&gt;BATTERY&lt;/li&gt;&lt;/ul&gt;</description>
<wire x1="-13.97" y1="3.81" x2="-13.97" y2="-3.81" width="0.127" layer="51"/>
<wire x1="-13.97" y1="-3.81" x2="-23.495" y2="-3.81" width="0.127" layer="51"/>
<wire x1="-23.495" y1="-3.81" x2="-23.495" y2="3.81" width="0.127" layer="51"/>
<wire x1="-23.495" y1="3.81" x2="-13.97" y2="3.81" width="0.127" layer="51"/>
<wire x1="23.368" y1="3.81" x2="13.97" y2="3.81" width="0.127" layer="51"/>
<wire x1="13.97" y1="3.81" x2="13.97" y2="-3.81" width="0.127" layer="51"/>
<wire x1="13.97" y1="-3.81" x2="23.368" y2="-3.81" width="0.127" layer="51"/>
<wire x1="23.368" y1="-3.81" x2="23.368" y2="3.81" width="0.127" layer="51"/>
<wire x1="-12.7" y1="3.81" x2="12.7" y2="3.81" width="0.127" layer="51"/>
<wire x1="12.7" y1="-3.81" x2="-12.7" y2="-3.81" width="0.127" layer="51"/>
<pad name="PWR@2" x="-13.97" y="0" drill="1.7018"/>
<pad name="PWR@1" x="-21.59" y="0" drill="1.7018"/>
<pad name="GND@2" x="13.97" y="0" drill="1.7018"/>
<pad name="GND@1" x="21.59" y="0" drill="1.7018"/>
<text x="-11.43" y="-1.27" size="2.54" layer="21" ratio="12">+</text>
<text x="8.89" y="-1.27" size="2.54" layer="21" ratio="12">-</text>
<text x="-23.749" y="0" size="0.6096" layer="25" font="vector" ratio="20" rot="R90" align="bottom-center">&gt;NAME</text>
<text x="-19.05" y="0" size="0.6096" layer="27" font="vector" ratio="20" rot="R90" align="top-center">&gt;VALUE</text>
</package>
<package name="BATTERY-AA">
<description>&lt;h3&gt;AA Battery Clips&lt;/h3&gt;
&lt;p&gt;PCB mount clips properly spaced to hold a AA battery&lt;/p&gt;
&lt;p&gt;&lt;a href="http://cdn.sparkfun.com/datasheets/Prototyping/M60-2p9.pdf"&gt;Datasheet&lt;/a&gt;&lt;/p&gt;
&lt;h4&gt;Devices Using&lt;/h4&gt;
&lt;ul&gt;&lt;li&gt;BATTERY&lt;/li&gt;&lt;/ul&gt;</description>
<wire x1="-17.526" y1="-4.826" x2="-27.051" y2="-4.826" width="0.254" layer="41"/>
<wire x1="-27.051" y1="-4.826" x2="-27.051" y2="4.826" width="0.254" layer="41"/>
<wire x1="-27.051" y1="4.826" x2="-17.526" y2="4.826" width="0.254" layer="41"/>
<wire x1="27.051" y1="4.826" x2="17.526" y2="4.826" width="0.2032" layer="21"/>
<wire x1="17.526" y1="-4.826" x2="27.051" y2="-4.826" width="0.2032" layer="21"/>
<wire x1="27.051" y1="-4.826" x2="27.051" y2="4.826" width="0.2032" layer="21"/>
<wire x1="-26.67" y1="7.62" x2="26.67" y2="7.62" width="0.127" layer="51"/>
<wire x1="26.67" y1="-7.62" x2="-26.67" y2="-7.62" width="0.127" layer="51"/>
<wire x1="-17.526" y1="4.826" x2="-17.526" y2="-4.826" width="0.2032" layer="41"/>
<wire x1="17.526" y1="4.826" x2="17.526" y2="2.159" width="0.2032" layer="21"/>
<wire x1="17.526" y1="-2.159" x2="17.526" y2="-4.826" width="0.2032" layer="21"/>
<wire x1="-17.526" y1="-4.826" x2="-27.051" y2="-4.826" width="0.2032" layer="21"/>
<wire x1="-27.051" y1="-4.826" x2="-27.051" y2="4.826" width="0.2032" layer="21"/>
<wire x1="-27.051" y1="4.826" x2="-17.526" y2="4.826" width="0.2032" layer="21"/>
<wire x1="-17.526" y1="4.826" x2="-17.526" y2="2.159" width="0.2032" layer="21"/>
<wire x1="-17.526" y1="-2.159" x2="-17.526" y2="-4.826" width="0.254" layer="21"/>
<wire x1="17.526" y1="4.826" x2="27.051" y2="4.826" width="0.254" layer="41"/>
<wire x1="27.051" y1="4.826" x2="27.051" y2="-4.826" width="0.254" layer="41"/>
<wire x1="27.051" y1="-4.826" x2="17.526" y2="-4.826" width="0.254" layer="41"/>
<wire x1="17.526" y1="-4.826" x2="17.526" y2="4.826" width="0.254" layer="41"/>
<pad name="PWR@2" x="-17.78" y="0" drill="1.8542" rot="R90"/>
<pad name="PWR@1" x="-25.146" y="0" drill="1.8542"/>
<pad name="GND@2" x="17.78" y="0" drill="1.8542"/>
<pad name="GND@1" x="25.146" y="0" drill="1.8542"/>
<text x="-14.732" y="-1.27" size="2.54" layer="21" ratio="12">+</text>
<text x="12.7" y="-1.27" size="2.54" layer="21" ratio="12">-</text>
<text x="-27.305" y="0" size="0.6096" layer="25" font="vector" ratio="20" rot="R90" align="bottom-center">&gt;NAME</text>
<text x="-21.971" y="0" size="0.6096" layer="27" font="vector" ratio="20" rot="R90" align="top-center">&gt;VALUE</text>
</package>
<package name="BATTCON_12MM_PTH">
<description>&lt;h3&gt;12mm Coin Cell Battery (CR1225) Holder - PTH&lt;/h3&gt;
&lt;p&gt;This is a through hole 12mm coin cell battery holder. Holds battery in place with friction. Metal housing is +, PCB pad underneath is -.&lt;/p&gt;
&lt;p&gt;&lt;a href="https://cdn.sparkfun.com/datasheets/Prototyping/KEY-3001.pdf"&gt;Datasheet&lt;/a&gt;&lt;/p&gt;
&lt;h4&gt;Devices Using&lt;/h4&gt;
&lt;ul&gt;&lt;li&gt;BATTERY&lt;/li&gt;&lt;/ul&gt;</description>
<wire x1="-6.35" y1="-3.81" x2="-3.81" y2="-6.35" width="0.2032" layer="21"/>
<wire x1="-3.81" y1="-6.35" x2="3.81" y2="-6.35" width="0.2032" layer="21"/>
<wire x1="3.81" y1="-6.35" x2="6.35" y2="-3.81" width="0.2032" layer="21"/>
<wire x1="6.35" y1="-3.81" x2="6.35" y2="-2.54" width="0.2032" layer="21"/>
<wire x1="-6.35" y1="-3.81" x2="-6.35" y2="-2.54" width="0.2032" layer="21"/>
<wire x1="-6.35" y1="2.54" x2="-6.35" y2="4.064" width="0.2032" layer="21"/>
<wire x1="6.35" y1="2.54" x2="6.35" y2="4.064" width="0.2032" layer="21"/>
<wire x1="-3.175" y1="5.588" x2="3.175" y2="5.588" width="0.2032" layer="21" curve="102.56384"/>
<wire x1="-6.35" y1="4.064" x2="-3.175" y2="5.588" width="0.2032" layer="21" curve="-123.398919"/>
<wire x1="6.35" y1="4.064" x2="3.175" y2="5.588" width="0.2032" layer="21" curve="128.77667"/>
<pad name="VCC@2" x="-6.604" y="0" drill="1.8542" shape="square"/>
<pad name="VCC@1" x="6.604" y="0" drill="1.8542" shape="square"/>
<smd name="GND" x="0" y="0" dx="9" dy="9" layer="1" roundness="100" cream="no"/>
<circle x="0" y="0" radius="1" width="2" layer="31"/>
<text x="0" y="-6.477" size="0.6096" layer="25" font="vector" ratio="20" rot="R180" align="bottom-center">&gt;NAME</text>
<text x="0" y="-6.223" size="0.6096" layer="27" font="vector" ratio="20" rot="R180" align="top-center">&gt;VALUE</text>
</package>
<package name="BATTCON_20MM">
<description>&lt;h3&gt;20mm Coin Cell Battery (CR2032) Holder - SMD (Single Pad)&lt;/h3&gt;
&lt;p&gt;Part number: CR2032-THM&lt;/p&gt;
&lt;h4&gt;Devices Using&lt;/h4&gt;
&lt;ul&gt;&lt;li&gt;BATTERY&lt;/li&gt;&lt;/ul&gt;</description>
<wire x1="-3.7" y1="-10.57" x2="3.7" y2="-10.57" width="0.2032" layer="21"/>
<wire x1="-3.7" y1="-10.57" x2="-10.5" y2="-4.5" width="0.2032" layer="21"/>
<wire x1="3.7" y1="-10.57" x2="10.5" y2="-4.5" width="0.2032" layer="21"/>
<wire x1="-5.3" y1="8.3" x2="5.3" y2="8.3" width="0.2032" layer="21" curve="69.999889"/>
<wire x1="10.5" y1="-4.5" x2="10.5" y2="-3.4" width="0.2032" layer="21"/>
<wire x1="-10.5" y1="-4.5" x2="-10.5" y2="-3.4" width="0.2032" layer="21"/>
<wire x1="-10.5" y1="6.3" x2="-5.3" y2="8.3" width="0.2032" layer="21" curve="-139.635474"/>
<wire x1="10.5" y1="6.3" x2="5.3" y2="8.3" width="0.2032" layer="21" curve="136.99875"/>
<wire x1="-10.5" y1="6.3" x2="-10.5" y2="3.4" width="0.2032" layer="21"/>
<wire x1="10.5" y1="6.3" x2="10.5" y2="3.4" width="0.2032" layer="21"/>
<circle x="0" y="0" radius="10" width="0.2032" layer="51"/>
<smd name="2" x="0" y="0" dx="6.07" dy="6.07" layer="1"/>
<smd name="1" x="-12.5" y="0" dx="6.07" dy="6.07" layer="1"/>
<smd name="3" x="12.5" y="0" dx="6.07" dy="6.07" layer="1"/>
<text x="0" y="-10.795" size="0.6096" layer="25" font="vector" ratio="20" rot="R180" align="bottom-center">&gt;NAME</text>
<text x="0" y="-10.287" size="0.6096" layer="27" font="vector" ratio="20" rot="R180" align="top-center">&gt;VALUE</text>
</package>
<package name="BATTCOM_20MM_PTH">
<description>&lt;h3&gt;20mm (CR2032) Coin Cell Battery Holder - PTH&lt;/h3&gt;
&lt;p&gt;Basic 20mm coin cell holder. Posts can be inserted into 0.1" perf board! Holds the common CR2032 type batteries.&lt;/p&gt;
&lt;p&gt;&lt;a href="http://www.sparkfun.com/datasheets/Prototyping/CoinCellHolder-20mm.pdf"&gt;Datasheet&lt;/a&gt;&lt;/p&gt;
&lt;h4&gt;Devices Using&lt;/h4&gt;
&lt;ul&gt;&lt;li&gt;BATTERY&lt;/li&gt;&lt;/ul&gt;</description>
<wire x1="10.34" y1="3.8" x2="13.32" y2="3.8" width="0.2032" layer="21"/>
<wire x1="13.32" y1="3.8" x2="13.32" y2="-3.8" width="0.2032" layer="21"/>
<wire x1="13.32" y1="-3.8" x2="10.34" y2="-3.8" width="0.2032" layer="21"/>
<circle x="0.06" y="0.1" radius="10" width="0.127" layer="51"/>
<pad name="2" x="-8.15" y="0" drill="1.3" rot="R90"/>
<pad name="1" x="11.85" y="0" drill="1.3" rot="R90"/>
<text x="8.6" y="-0.7" size="1.27" layer="51">+</text>
<text x="-6.4" y="-0.7" size="1.27" layer="51">-</text>
<wire x1="-10.54" y1="3.8" x2="-10.54" y2="-3.8" width="0.2032" layer="21"/>
<wire x1="10.34" y1="3.8" x2="-10.54" y2="3.8" width="0.2032" layer="21" curve="139.856795"/>
<wire x1="10.34" y1="-3.8" x2="-10.54" y2="-3.8" width="0.2032" layer="21" curve="-139.856795"/>
<text x="-10.795" y="0" size="0.6096" layer="25" font="vector" ratio="20" rot="R90" align="bottom-center">&gt;NAME</text>
<text x="0" y="0" size="0.6096" layer="27" font="vector" ratio="20" rot="R90" align="top-center">&gt;VALUE</text>
</package>
<package name="BATTCON_24.5MM_PTH">
<description>&lt;h3&gt;24.5mm Coin Cell Battery (CR2450) Holder - PTH&lt;/h3&gt;
&lt;p&gt;Through hole 24.5 mm coin cell holder. Holds battery in place with friction. Metal housing is +, PCB pad underneath is -.&lt;/p&gt;
&lt;p&gt;&lt;a href="http://www.sparkfun.com/datasheets/Batteries/Coin_Cell_Holder_245mm-3009.pdf"&gt;Datasheet&lt;/a&gt;&lt;/p&gt;
&lt;h4&gt;Devices Using&lt;/h4&gt;
&lt;ul&gt;&lt;li&gt;BATTERY&lt;/li&gt;&lt;/ul&gt;</description>
<wire x1="-3.81" y1="-12.7" x2="3.81" y2="-12.7" width="0.2032" layer="21"/>
<wire x1="-3.81" y1="-12.7" x2="-12.7" y2="-6.35" width="0.2032" layer="21"/>
<wire x1="3.81" y1="-12.7" x2="12.7" y2="-6.35" width="0.2032" layer="21"/>
<wire x1="-7.62" y1="9.779" x2="7.62" y2="9.779" width="0.2032" layer="21" curve="63.785901"/>
<wire x1="12.7" y1="-6.35" x2="12.7" y2="-2.54" width="0.2032" layer="21"/>
<wire x1="-12.7" y1="-6.35" x2="-12.7" y2="-2.54" width="0.2032" layer="21"/>
<wire x1="-12.7" y1="6.35" x2="-7.62" y2="9.779" width="0.2032" layer="21" curve="-123.780121"/>
<wire x1="12.7" y1="6.35" x2="7.62" y2="9.779" width="0.2032" layer="21" curve="123.773101"/>
<wire x1="-12.7" y1="6.35" x2="-12.7" y2="2.54" width="0.2032" layer="21"/>
<wire x1="12.7" y1="6.35" x2="12.7" y2="2.54" width="0.2032" layer="21"/>
<circle x="0" y="0" radius="12.25" width="0.2032" layer="51"/>
<pad name="1" x="-12.7" y="0" drill="1.8542" shape="square"/>
<pad name="3" x="12.7" y="0" drill="1.8542" shape="square"/>
<smd name="2" x="0" y="0" dx="4.064" dy="4.064" layer="1"/>
<text x="0" y="-12.954" size="0.6096" layer="25" font="vector" ratio="20" rot="R180" align="bottom-center">&gt;NAME</text>
<text x="0" y="-12.446" size="0.6096" layer="27" font="vector" ratio="20" rot="R180" align="top-center">&gt;VALUE</text>
</package>
<package name="BATTCON_12MM">
<description>&lt;h3&gt;12mm Coin Cell (CR1225) Battery Holder - SMD&lt;/h3&gt;
&lt;p&gt;Holds battery in place with friction. The metal housing connects to the positive side of the battery and the PCB pad underneath is connected to the negative side.&lt;/p&gt;
&lt;p&gt;&lt;a href="https://cdn.sparkfun.com/datasheets/Prototyping/KEY-3000.pdf"&gt;Datasheet&lt;/a&gt;&lt;/p&gt;
&lt;h4&gt;Devices Using&lt;/h4&gt;
&lt;ul&gt;&lt;li&gt;BATTERY&lt;/li&gt;&lt;/ul&gt;</description>
<wire x1="-6.096" y1="4.318" x2="-3.81" y2="5.334" width="0.2032" layer="21" curve="-90"/>
<wire x1="3.81" y1="5.334" x2="6.096" y2="4.318" width="0.2032" layer="21" curve="-90"/>
<wire x1="6.096" y1="4.318" x2="6.096" y2="-3.302" width="0.2032" layer="21"/>
<wire x1="6.096" y1="-3.302" x2="3.048" y2="-6.35" width="0.2032" layer="21"/>
<wire x1="3.048" y1="-6.35" x2="-3.048" y2="-6.35" width="0.2032" layer="21"/>
<wire x1="-3.048" y1="-6.35" x2="-6.096" y2="-3.302" width="0.2032" layer="21"/>
<wire x1="-6.096" y1="-3.302" x2="-6.096" y2="4.318" width="0.2032" layer="21"/>
<wire x1="3.81" y1="5.334" x2="-3.81" y2="5.334" width="0.2032" layer="21" curve="-90"/>
<smd name="GND" x="0" y="0" dx="8" dy="8" layer="1" roundness="100" cream="no"/>
<smd name="PWR@1" x="-7.874" y="0" dx="3.175" dy="3.175" layer="1"/>
<smd name="PWR@2" x="7.874" y="0" dx="3.175" dy="3.175" layer="1"/>
<circle x="0" y="0" radius="6" width="0.127" layer="51"/>
<circle x="0" y="0" radius="6" width="0.127" layer="39"/>
<circle x="0" y="0" radius="1" width="2" layer="31"/>
<text x="0" y="-6.477" size="0.6096" layer="25" font="vector" ratio="20" rot="R180" align="bottom-center">&gt;NAME</text>
<text x="0" y="-4.953" size="0.6096" layer="27" font="vector" ratio="20" rot="R180" align="top-center">&gt;VALUE</text>
</package>
<package name="BATTCON_20MM_4LEGS">
<description>&lt;h3&gt;20mm Coin Cell Battery (CR2032) Holder - SMD (Dual Pad)&lt;/h3&gt;
&lt;p&gt;This holder fits 20mm Lithium coin cell batteries and holds the battery in place with friction. The metal housing connects to the positive (+) side of the battery and the PCB pad underneath is connected to the negative (-) side.&lt;/p&gt;
&lt;p&gt;&lt;a href="http://cdn.sparkfun.com/datasheets/Prototyping/BAT-BLH-001.jpg"&gt;Datasheet&lt;/a&gt;&lt;/p&gt;
&lt;h4&gt;Devices Using&lt;/h4&gt;
&lt;ul&gt;&lt;li&gt;BATTERY&lt;/li&gt;&lt;/ul&gt;</description>
<wire x1="-7.5" y1="7.35" x2="7.5" y2="7.35" width="0.2032" layer="21"/>
<wire x1="-7.5" y1="7.35" x2="-10.55" y2="4.65" width="0.2032" layer="21"/>
<wire x1="7.5" y1="7.35" x2="10.55" y2="4.65" width="0.2032" layer="21"/>
<wire x1="10.55" y1="2.55" x2="10.55" y2="0.55" width="0.2032" layer="51"/>
<wire x1="10.55" y1="-0.55" x2="10.55" y2="-2.55" width="0.2032" layer="51"/>
<wire x1="-10.55" y1="2.55" x2="-10.55" y2="0.55" width="0.2032" layer="51"/>
<wire x1="-10.55" y1="-0.55" x2="-10.55" y2="-2.55" width="0.2032" layer="51"/>
<wire x1="10.55" y1="2.55" x2="11.45" y2="2.55" width="0.2032" layer="51"/>
<wire x1="11.45" y1="2.55" x2="11.45" y2="0.55" width="0.2032" layer="51"/>
<wire x1="11.45" y1="0.55" x2="10.55" y2="0.55" width="0.2032" layer="51"/>
<wire x1="10.55" y1="-0.55" x2="11.45" y2="-0.55" width="0.2032" layer="51"/>
<wire x1="11.45" y1="-0.55" x2="11.45" y2="-2.55" width="0.2032" layer="51"/>
<wire x1="11.45" y1="-2.55" x2="10.55" y2="-2.55" width="0.2032" layer="51"/>
<wire x1="-10.55" y1="-2.55" x2="-11.45" y2="-2.55" width="0.2032" layer="51"/>
<wire x1="-11.45" y1="-2.55" x2="-11.45" y2="-0.55" width="0.2032" layer="51"/>
<wire x1="-11.45" y1="-0.55" x2="-10.55" y2="-0.55" width="0.2032" layer="51"/>
<wire x1="-10.55" y1="0.55" x2="-11.45" y2="0.55" width="0.2032" layer="51"/>
<wire x1="-11.45" y1="0.55" x2="-11.45" y2="2.55" width="0.2032" layer="51"/>
<wire x1="-11.45" y1="2.55" x2="-10.55" y2="2.55" width="0.2032" layer="51"/>
<wire x1="10.55" y1="-4.55" x2="5.55" y2="-7.95" width="0.2032" layer="21"/>
<wire x1="5.55" y1="-7.95" x2="-5.55" y2="-7.95" width="0.2032" layer="21" curve="62.415735"/>
<wire x1="-5.55" y1="-7.95" x2="-10.55" y2="-4.55" width="0.2032" layer="21"/>
<wire x1="10.55" y1="4.65" x2="10.55" y2="3.2" width="0.2032" layer="21"/>
<wire x1="-10.55" y1="3.581" x2="-10.55" y2="4.65" width="0.2032" layer="21"/>
<wire x1="-10.55" y1="-4.55" x2="-10.55" y2="-3.581" width="0.2032" layer="21"/>
<wire x1="10.55" y1="-4.55" x2="10.55" y2="-3.581" width="0.2032" layer="21"/>
<circle x="0" y="0" radius="10" width="0.2032" layer="51"/>
<smd name="POSITIVE@1" x="-11.176" y="1.651" dx="2.032" dy="3.175" layer="1" rot="R180" cream="no"/>
<smd name="NEGATIVE" x="0" y="0" dx="13" dy="8" layer="1" roundness="100" cream="no"/>
<smd name="POSITIVE@4" x="11.176" y="-1.651" dx="2.032" dy="3.175" layer="1" cream="no"/>
<smd name="POSITIVE@2" x="-11.176" y="-1.524" dx="2.032" dy="3.175" layer="1" cream="no"/>
<smd name="POSITIVE@3" x="11.176" y="1.524" dx="2.032" dy="3.175" layer="1" rot="R180" cream="no"/>
<rectangle x1="-2" y1="-2" x2="2" y2="2" layer="31"/>
<rectangle x1="-13.462" y1="-3.429" x2="-9.906" y2="3.683" layer="31"/>
<rectangle x1="9.906" y1="-3.556" x2="13.462" y2="3.556" layer="31"/>
<text x="0" y="7.493" size="0.6096" layer="25" font="vector" ratio="20" align="bottom-center">&gt;NAME</text>
<text x="0" y="7.112" size="0.6096" layer="27" font="vector" ratio="20" align="top-center">&gt;VALUE</text>
</package>
<package name="BATTERY-AA-KIT">
<description>&lt;h3&gt;AA Battery Clips (KIT Variant)&lt;/h3&gt;
&lt;p&gt;PCB mount clips properly spaced to hold a AA battery&lt;/p&gt;
&lt;p&gt;&lt;b&gt;Warning:&lt;/b&gt; This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.&lt;/p&gt;
&lt;p&gt;&lt;a href="http://cdn.sparkfun.com/datasheets/Prototyping/M60-2p9.pdf"&gt;Datasheet&lt;/a&gt;&lt;/p&gt;
&lt;h4&gt;Devices Using&lt;/h4&gt;
&lt;ul&gt;&lt;li&gt;BATTERY&lt;/li&gt;&lt;/ul&gt;</description>
<wire x1="-17.526" y1="-4.826" x2="-27.051" y2="-4.826" width="0.254" layer="41"/>
<wire x1="-27.051" y1="-4.826" x2="-27.051" y2="4.826" width="0.254" layer="41"/>
<wire x1="-27.051" y1="4.826" x2="-17.526" y2="4.826" width="0.254" layer="41"/>
<wire x1="27.051" y1="4.826" x2="17.526" y2="4.826" width="0.2032" layer="21"/>
<wire x1="17.526" y1="-4.826" x2="27.051" y2="-4.826" width="0.2032" layer="21"/>
<wire x1="27.051" y1="-4.826" x2="27.051" y2="4.826" width="0.2032" layer="21"/>
<wire x1="-26.67" y1="7.62" x2="26.67" y2="7.62" width="0.127" layer="51"/>
<wire x1="26.67" y1="-7.62" x2="-26.67" y2="-7.62" width="0.127" layer="51"/>
<wire x1="-17.526" y1="4.826" x2="-17.526" y2="-4.826" width="0.254" layer="41"/>
<wire x1="-17.526" y1="-4.826" x2="-27.051" y2="-4.826" width="0.2032" layer="21"/>
<wire x1="-27.051" y1="-4.826" x2="-27.051" y2="4.826" width="0.2032" layer="21"/>
<wire x1="-27.051" y1="4.826" x2="-17.526" y2="4.826" width="0.2032" layer="21"/>
<wire x1="17.526" y1="4.826" x2="27.051" y2="4.826" width="0.254" layer="41"/>
<wire x1="27.051" y1="4.826" x2="27.051" y2="-4.826" width="0.254" layer="41"/>
<wire x1="27.051" y1="-4.826" x2="17.526" y2="-4.826" width="0.254" layer="41"/>
<wire x1="17.526" y1="-4.826" x2="17.526" y2="4.826" width="0.254" layer="41"/>
<wire x1="-24.0157" y1="-0.0482" x2="-18.9129" y2="-0.0457" width="0.4064" layer="49"/>
<wire x1="18.9103" y1="-0.0482" x2="24.0131" y2="-0.0457" width="0.4064" layer="49"/>
<wire x1="13.97" y1="2.54" x2="-12.7" y2="2.54" width="0.4064" layer="21"/>
<wire x1="-12.7" y1="2.54" x2="-12.7" y2="0.5842" width="0.4064" layer="21"/>
<wire x1="-12.7" y1="0.5842" x2="-12.7" y2="-0.6858" width="0.4064" layer="21"/>
<wire x1="-12.7" y1="-0.6858" x2="-12.7" y2="-2.54" width="0.4064" layer="21"/>
<wire x1="-12.7" y1="-2.54" x2="13.97" y2="-2.54" width="0.4064" layer="21"/>
<wire x1="13.97" y1="-2.54" x2="13.97" y2="2.54" width="0.4064" layer="21"/>
<wire x1="-12.7" y1="0.5842" x2="-13.97" y2="0.5842" width="0.4064" layer="21"/>
<wire x1="-13.97" y1="0.5842" x2="-13.97" y2="-0.6858" width="0.4064" layer="21"/>
<wire x1="-13.97" y1="-0.6858" x2="-12.7" y2="-0.6858" width="0.4064" layer="21"/>
<wire x1="12.065" y1="0" x2="10.795" y2="0" width="0.4064" layer="21"/>
<wire x1="-9.525" y1="0" x2="-10.795" y2="0" width="0.4064" layer="21"/>
<wire x1="-10.16" y1="0.635" x2="-10.16" y2="-0.635" width="0.4064" layer="21"/>
<pad name="GND@1" x="25.146" y="0" drill="1.8542" stop="no"/>
<pad name="GND@2" x="18.034" y="0" drill="1.8542" stop="no"/>
<pad name="PWR@1" x="-25.146" y="0" drill="1.8542" stop="no"/>
<pad name="PWR@2" x="-18.034" y="0" drill="1.8542" rot="R90" stop="no"/>
<polygon width="0.127" layer="30">
<vertex x="-23.8252" y="-0.0508" curve="90"/>
<vertex x="-25.146" y="1.3462" curve="90"/>
<vertex x="-26.4668" y="-0.0762" curve="90"/>
<vertex x="-25.146" y="-1.3462" curve="90"/>
</polygon>
<polygon width="0.127" layer="29">
<vertex x="-25.1206" y="-0.8636" curve="-90.090301"/>
<vertex x="-26.0096" y="-0.0508" curve="-90"/>
<vertex x="-25.1714" y="0.8636" curve="-89.987112"/>
<vertex x="-24.2824" y="0" curve="-90"/>
</polygon>
<polygon width="0.127" layer="30">
<vertex x="26.4668" y="-0.0508" curve="90"/>
<vertex x="25.146" y="1.3462" curve="90"/>
<vertex x="23.8252" y="-0.0762" curve="90"/>
<vertex x="25.146" y="-1.3462" curve="90"/>
</polygon>
<polygon width="0.127" layer="29">
<vertex x="25.1714" y="-0.8636" curve="-90.090301"/>
<vertex x="24.2824" y="-0.0508" curve="-90"/>
<vertex x="25.1206" y="0.8636" curve="-89.987112"/>
<vertex x="26.0096" y="0" curve="-90"/>
</polygon>
<polygon width="0.127" layer="30">
<vertex x="-16.7132" y="-0.0508" curve="90"/>
<vertex x="-18.034" y="1.3462" curve="90"/>
<vertex x="-19.3548" y="-0.0762" curve="90"/>
<vertex x="-18.034" y="-1.3462" curve="90"/>
</polygon>
<polygon width="0.127" layer="29">
<vertex x="-18.0086" y="-0.8636" curve="-90.090301"/>
<vertex x="-18.8976" y="-0.0508" curve="-90"/>
<vertex x="-18.0594" y="0.8636" curve="-89.987112"/>
<vertex x="-17.1704" y="0" curve="-90"/>
</polygon>
<polygon width="0.127" layer="30">
<vertex x="19.3548" y="-0.0508" curve="90"/>
<vertex x="18.034" y="1.3462" curve="90"/>
<vertex x="16.7132" y="-0.0762" curve="90"/>
<vertex x="18.034" y="-1.3462" curve="90"/>
</polygon>
<polygon width="0.127" layer="29">
<vertex x="18.0594" y="-0.8636" curve="-90.090301"/>
<vertex x="17.1704" y="-0.0508" curve="-90"/>
<vertex x="18.0086" y="0.8636" curve="-89.987112"/>
<vertex x="18.8976" y="0" curve="-90"/>
</polygon>
<text x="-27.305" y="0" size="0.6096" layer="25" font="vector" ratio="20" rot="R90" align="bottom-center">&gt;NAME</text>
<text x="-23.241" y="0" size="0.6096" layer="27" font="vector" ratio="20" rot="R90" align="top-center">&gt;VALUE</text>
</package>
<package name="BATTCON_9V">
<description>&lt;h3&gt;PCMOUNT 9V Battery Holder&lt;/h3&gt;
&lt;p&gt;&lt;a href="http://www.memoryprotectiondevices.com/datasheets/BC9VPC-datasheet.pdf"&gt;Datasheet&lt;/a&gt; (MPD BC9VPC)&lt;/p&gt;
&lt;h4&gt;Devices Using&lt;/h4&gt;
&lt;ul&gt;&lt;li&gt;BATTERY&lt;/li&gt;&lt;/ul&gt;</description>
<pad name="+" x="0" y="0" drill="1.905"/>
<pad name="-" x="0" y="-12.954" drill="1.905"/>
<wire x1="-53.0098" y1="8.5598" x2="1.9304" y2="8.5598" width="0.2032" layer="21"/>
<wire x1="1.9304" y1="8.5598" x2="1.9304" y2="-21.4122" width="0.2032" layer="21"/>
<wire x1="1.9304" y1="-21.4122" x2="-53.0098" y2="-21.4122" width="0.2032" layer="21"/>
<wire x1="-53.0098" y1="-21.4122" x2="-53.0098" y2="8.5598" width="0.2032" layer="21"/>
<circle x="-39.2684" y="4.7498" radius="1.27" width="0.127" layer="51"/>
<circle x="-12.2936" y="4.7498" radius="1.27" width="0.127" layer="51"/>
<circle x="-25.781" y="-17.6022" radius="1.27" width="0.127" layer="51"/>
<text x="-53.34" y="-6.35" size="0.6096" layer="25" font="vector" ratio="20" rot="R90" align="bottom-center">&gt;NAME</text>
<text x="-25.4" y="-6.35" size="0.6096" layer="27" font="vector" ratio="20" rot="R90" align="top-center">&gt;VALUE</text>
</package>
<package name="BATTCON_20MM_4LEGS_OVERPASTE">
<description>&lt;h3&gt;20mm Coin Cell Battery (CR2032) Holder - SMD (Dual Pad) (Overpaste on pads)&lt;/h3&gt;
&lt;p&gt;This holder fits 20mm Lithium coin cell batteries and holds the battery in place with friction. The metal housing connects to the positive (+) side of the battery and the PCB pad underneath is connected to the negative (-) side.&lt;/p&gt;
&lt;p&gt;&lt;a href="http://cdn.sparkfun.com/datasheets/Prototyping/BAT-BLH-001.jpg"&gt;Datasheet&lt;/a&gt;&lt;/p&gt;
&lt;h4&gt;Devices Using&lt;/h4&gt;
&lt;ul&gt;&lt;li&gt;BATTERY&lt;/li&gt;&lt;/ul&gt;</description>
<wire x1="-7.5" y1="7.35" x2="7.5" y2="7.35" width="0.2032" layer="21"/>
<wire x1="-7.5" y1="7.35" x2="-10.55" y2="4.65" width="0.2032" layer="21"/>
<wire x1="7.5" y1="7.35" x2="10.55" y2="4.65" width="0.2032" layer="21"/>
<wire x1="10.55" y1="2.55" x2="10.55" y2="0.55" width="0.2032" layer="51"/>
<wire x1="10.55" y1="-0.55" x2="10.55" y2="-2.55" width="0.2032" layer="51"/>
<wire x1="-10.55" y1="2.55" x2="-10.55" y2="0.55" width="0.2032" layer="51"/>
<wire x1="-10.55" y1="-0.55" x2="-10.55" y2="-2.55" width="0.2032" layer="51"/>
<wire x1="10.55" y1="2.55" x2="11.45" y2="2.55" width="0.2032" layer="51"/>
<wire x1="11.45" y1="2.55" x2="11.45" y2="0.55" width="0.2032" layer="51"/>
<wire x1="11.45" y1="0.55" x2="10.55" y2="0.55" width="0.2032" layer="51"/>
<wire x1="10.55" y1="-0.55" x2="11.45" y2="-0.55" width="0.2032" layer="51"/>
<wire x1="11.45" y1="-0.55" x2="11.45" y2="-2.55" width="0.2032" layer="51"/>
<wire x1="11.45" y1="-2.55" x2="10.55" y2="-2.55" width="0.2032" layer="51"/>
<wire x1="-10.55" y1="-2.55" x2="-11.45" y2="-2.55" width="0.2032" layer="51"/>
<wire x1="-11.45" y1="-2.55" x2="-11.45" y2="-0.55" width="0.2032" layer="51"/>
<wire x1="-11.45" y1="-0.55" x2="-10.55" y2="-0.55" width="0.2032" layer="51"/>
<wire x1="-10.55" y1="0.55" x2="-11.45" y2="0.55" width="0.2032" layer="51"/>
<wire x1="-11.45" y1="0.55" x2="-11.45" y2="2.55" width="0.2032" layer="51"/>
<wire x1="-11.45" y1="2.55" x2="-10.55" y2="2.55" width="0.2032" layer="51"/>
<wire x1="10.55" y1="-4.55" x2="5.55" y2="-7.95" width="0.2032" layer="21"/>
<wire x1="5.55" y1="-7.95" x2="-5.55" y2="-7.95" width="0.2032" layer="21" curve="62.415735"/>
<wire x1="-5.55" y1="-7.95" x2="-10.55" y2="-4.55" width="0.2032" layer="21"/>
<wire x1="10.55" y1="4.65" x2="10.55" y2="3.2" width="0.2032" layer="21"/>
<wire x1="-10.55" y1="3.2" x2="-10.55" y2="4.65" width="0.2032" layer="21"/>
<wire x1="-10.55" y1="-4.55" x2="-10.55" y2="-3.2" width="0.2032" layer="21"/>
<wire x1="10.55" y1="-4.55" x2="10.55" y2="-3.2" width="0.2032" layer="21"/>
<circle x="0" y="0" radius="10" width="0.2032" layer="51"/>
<smd name="1" x="-11" y="1.55" dx="2.54" dy="1.778" layer="1" rot="R90" cream="no"/>
<smd name="2" x="0" y="0" dx="13" dy="8" layer="1" roundness="100" cream="no"/>
<smd name="3" x="11" y="1.55" dx="2.54" dy="1.778" layer="1" rot="R90" cream="no"/>
<smd name="P$1" x="-11" y="-1.55" dx="2.54" dy="1.778" layer="1" rot="R90" cream="no"/>
<smd name="P$2" x="11" y="-1.55" dx="2.54" dy="1.778" layer="1" rot="R90" cream="no"/>
<rectangle x1="-2" y1="-2" x2="2" y2="2" layer="31"/>
<rectangle x1="-13.97" y1="-3.048" x2="-9.906" y2="3.048" layer="31"/>
<rectangle x1="9.906" y1="-3.048" x2="13.97" y2="3.048" layer="31"/>
<text x="0" y="7.62" size="0.6096" layer="25" font="vector" ratio="20" align="bottom-center">&gt;NAME</text>
<text x="0" y="7.112" size="0.6096" layer="27" font="vector" ratio="20" align="top-center">&gt;VALUE</text>
</package>
<package name="BATTERY-AAA-KIT">
<description>&lt;h3&gt;AAA Battery Clips (KIT Variant)&lt;/h3&gt;
&lt;p&gt;PCB mount clips properly spaced to hold a AAA battery.&lt;/p&gt;
&lt;p&gt;&lt;b&gt;Warning:&lt;/b&gt; This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.&lt;/p&gt;
&lt;p&gt;&lt;a href="http://cdn.sparkfun.com/datasheets/Prototyping/M60-2p9.pdf"&gt;Datasheet&lt;/a&gt;&lt;/p&gt;
&lt;h4&gt;Devices Using&lt;/h4&gt;
&lt;ul&gt;&lt;li&gt;BATTERY&lt;/li&gt;&lt;/ul&gt;</description>
<wire x1="-13.97" y1="3.81" x2="-13.97" y2="-3.81" width="0.127" layer="51"/>
<wire x1="-13.97" y1="-3.81" x2="-23.495" y2="-3.81" width="0.2032" layer="51"/>
<wire x1="-23.495" y1="-3.81" x2="-23.495" y2="3.81" width="0.127" layer="51"/>
<wire x1="-23.495" y1="3.81" x2="-13.97" y2="3.81" width="0.2032" layer="51"/>
<wire x1="23.4442" y1="3.81" x2="13.97" y2="3.81" width="0.127" layer="51"/>
<wire x1="13.97" y1="3.81" x2="13.97" y2="-3.81" width="0.127" layer="51"/>
<wire x1="13.97" y1="-3.81" x2="23.4442" y2="-3.81" width="0.127" layer="51"/>
<wire x1="23.4442" y1="-3.81" x2="23.4442" y2="3.81" width="0.127" layer="51"/>
<pad name="PWR@2" x="-13.97" y="0" drill="1.7018" stop="no"/>
<pad name="PWR@1" x="-21.59" y="0" drill="1.7018" stop="no"/>
<pad name="GND@2" x="13.97" y="0" drill="1.7018" stop="no"/>
<pad name="GND@1" x="21.59" y="0" drill="1.7018" stop="no"/>
<wire x1="-13.97" y1="-3.81" x2="-23.4442" y2="-3.81" width="0.254" layer="41"/>
<wire x1="-23.4442" y1="-3.81" x2="-23.4442" y2="3.81" width="0.2032" layer="41"/>
<wire x1="-23.4442" y1="3.81" x2="-13.97" y2="3.81" width="0.254" layer="41"/>
<wire x1="23.4442" y1="3.81" x2="13.97" y2="3.81" width="0.2032" layer="21"/>
<wire x1="13.97" y1="-3.81" x2="23.4442" y2="-3.81" width="0.2032" layer="21"/>
<wire x1="23.4442" y1="-3.81" x2="23.4442" y2="3.81" width="0.2032" layer="21"/>
<wire x1="-13.97" y1="3.81" x2="-13.97" y2="-3.81" width="0.254" layer="41"/>
<wire x1="-13.97" y1="-3.81" x2="-23.4442" y2="-3.81" width="0.2032" layer="21"/>
<wire x1="-23.4442" y1="-3.81" x2="-23.4442" y2="3.81" width="0.2032" layer="21"/>
<wire x1="-23.4442" y1="3.81" x2="-13.97" y2="3.81" width="0.2032" layer="21"/>
<wire x1="13.97" y1="3.81" x2="23.4442" y2="3.81" width="0.254" layer="41"/>
<wire x1="23.4442" y1="3.81" x2="23.4442" y2="-3.81" width="0.254" layer="41"/>
<wire x1="23.4442" y1="-3.81" x2="13.97" y2="-3.81" width="0.254" layer="41"/>
<wire x1="13.97" y1="-3.81" x2="13.97" y2="3.81" width="0.254" layer="41"/>
<wire x1="-21.59" y1="0" x2="-13.97" y2="0" width="0.4064" layer="49"/>
<wire x1="13.97" y1="0" x2="21.59" y2="0" width="0.4064" layer="49"/>
<wire x1="11.43" y1="2.54" x2="-10.16" y2="2.54" width="0.4064" layer="21"/>
<wire x1="-10.16" y1="2.54" x2="-10.16" y2="0.5842" width="0.4064" layer="21"/>
<wire x1="-10.16" y1="0.5842" x2="-10.16" y2="-0.6858" width="0.4064" layer="21"/>
<wire x1="-10.16" y1="-0.6858" x2="-10.16" y2="-2.54" width="0.4064" layer="21"/>
<wire x1="-10.16" y1="-2.54" x2="11.43" y2="-2.54" width="0.4064" layer="21"/>
<wire x1="11.43" y1="-2.54" x2="11.43" y2="2.54" width="0.4064" layer="21"/>
<wire x1="-10.16" y1="0.5842" x2="-11.43" y2="0.5842" width="0.4064" layer="21"/>
<wire x1="-11.43" y1="0.5842" x2="-11.43" y2="-0.6858" width="0.4064" layer="21"/>
<wire x1="-11.43" y1="-0.6858" x2="-10.16" y2="-0.6858" width="0.4064" layer="21"/>
<wire x1="9.525" y1="0" x2="8.255" y2="0" width="0.4064" layer="21"/>
<wire x1="-6.985" y1="0" x2="-8.255" y2="0" width="0.4064" layer="21"/>
<wire x1="-7.62" y1="0.635" x2="-7.62" y2="-0.635" width="0.4064" layer="21"/>
<circle x="13.97" y="0" radius="0.40160625" width="0.889" layer="29"/>
<circle x="13.97" y="0" radius="0.40160625" width="1.778" layer="30"/>
<circle x="21.59" y="0" radius="0.40160625" width="0.889" layer="29"/>
<circle x="21.59" y="0" radius="0.40160625" width="1.778" layer="30"/>
<circle x="-13.97" y="0" radius="0.40160625" width="0.889" layer="29"/>
<circle x="-13.97" y="0" radius="0.40160625" width="1.778" layer="30"/>
<circle x="-21.59" y="0" radius="0.40160625" width="1.778" layer="30"/>
<circle x="-21.59" y="0" radius="0.40160625" width="0.889" layer="29"/>
<wire x1="-22.86" y1="5.08" x2="22.86" y2="5.08" width="0.127" layer="51"/>
<wire x1="-22.86" y1="-5.08" x2="22.86" y2="-5.08" width="0.127" layer="51"/>
<text x="-23.749" y="0" size="0.6096" layer="25" font="vector" ratio="20" rot="R90" align="bottom-center">&gt;NAME</text>
<text x="-19.05" y="0" size="0.6096" layer="27" font="vector" ratio="20" rot="R90" align="top-center">&gt;VALUE</text>
</package>
<package name="BATTERY_18650-HOLDER">
<description>&lt;h3&gt;18650 Lithium Ion Cell Battery Holders&lt;/h3&gt;
&lt;p&gt;PCB mount clips properly spaced to hold a 18650 Lithium Ion Cell battery.&lt;/p&gt;
&lt;p&gt;&lt;a href="https://cdn.sparkfun.com/datasheets/Prototyping/54.PDF"&gt;Datasheet&lt;/a&gt;&lt;/p&gt;
&lt;h4&gt;Devices Using&lt;/h4&gt;
&lt;ul&gt;&lt;li&gt;BATTERY&lt;/li&gt;&lt;/ul&gt;</description>
<wire x1="-33" y1="9" x2="33" y2="9" width="0.127" layer="51"/>
<wire x1="33" y1="-9" x2="-33" y2="-9" width="0.127" layer="51"/>
<text x="-18.542" y="-1.27" size="2.54" layer="21" ratio="12">+</text>
<text x="16.51" y="-1.27" size="2.54" layer="21" ratio="12">-</text>
<wire x1="-33" y1="9" x2="-33" y2="-9" width="0.127" layer="51"/>
<wire x1="33" y1="9" x2="33" y2="-9" width="0.127" layer="51"/>
<wire x1="-21.32" y1="5.5626" x2="-21.32" y2="-5.5626" width="0.2032" layer="41"/>
<wire x1="-21.32" y1="-5.5626" x2="-30.845" y2="-5.5626" width="0.2032" layer="41"/>
<wire x1="-30.845" y1="-5.5626" x2="-30.845" y2="-4.445" width="0.2032" layer="41"/>
<wire x1="-30.845" y1="-4.445" x2="-34.3248" y2="-4.445" width="0.2032" layer="41"/>
<wire x1="-34.3248" y1="-4.445" x2="-34.3248" y2="4.445" width="0.2032" layer="41"/>
<wire x1="-34.3248" y1="4.445" x2="-30.845" y2="4.445" width="0.2032" layer="41"/>
<wire x1="-30.845" y1="4.445" x2="-30.845" y2="5.5626" width="0.2032" layer="41"/>
<wire x1="-30.845" y1="5.5626" x2="-21.32" y2="5.5626" width="0.2032" layer="41"/>
<wire x1="21.32" y1="-5.5626" x2="21.32" y2="5.5626" width="0.2032" layer="41"/>
<wire x1="21.32" y1="5.5626" x2="30.845" y2="5.5626" width="0.2032" layer="41"/>
<wire x1="30.845" y1="5.5626" x2="30.845" y2="4.445" width="0.2032" layer="41"/>
<wire x1="30.845" y1="4.445" x2="34.3248" y2="4.445" width="0.2032" layer="41"/>
<wire x1="34.3248" y1="4.445" x2="34.3248" y2="-4.445" width="0.2032" layer="41"/>
<wire x1="34.3248" y1="-4.445" x2="30.845" y2="-4.445" width="0.2032" layer="41"/>
<wire x1="30.845" y1="-4.445" x2="30.845" y2="-5.5626" width="0.2032" layer="41"/>
<wire x1="30.845" y1="-5.5626" x2="21.32" y2="-5.5626" width="0.2032" layer="41"/>
<pad name="PWR@3" x="-23.88" y="-2.55" drill="1.8288" rot="R90"/>
<pad name="PWR@1" x="-30.628" y="-0.01" drill="1.8288"/>
<pad name="PWR@2" x="-23.88" y="2.53" drill="1.8288" rot="R90"/>
<wire x1="-21.23" y1="5.5526" x2="-21.23" y2="-5.5726" width="0.2032" layer="21"/>
<wire x1="-21.23" y1="-5.5726" x2="-30.765" y2="-5.5726" width="0.2032" layer="21"/>
<wire x1="-30.765" y1="-5.5726" x2="-30.765" y2="-4.455" width="0.2032" layer="21"/>
<wire x1="-30.765" y1="-4.455" x2="-34.2448" y2="-4.455" width="0.2032" layer="21"/>
<wire x1="-34.2448" y1="-4.455" x2="-34.2448" y2="4.435" width="0.2032" layer="21"/>
<wire x1="-34.2448" y1="4.435" x2="-30.765" y2="4.435" width="0.2032" layer="21"/>
<wire x1="-30.765" y1="4.435" x2="-30.765" y2="5.5526" width="0.2032" layer="21"/>
<wire x1="-30.765" y1="5.5526" x2="-21.23" y2="5.5526" width="0.2032" layer="21"/>
<pad name="GND@2" x="23.88" y="2.55" drill="1.8288" rot="R270"/>
<pad name="GND@1" x="30.628" y="0.01" drill="1.8288" rot="R180"/>
<pad name="GND@3" x="23.88" y="-2.53" drill="1.8288" rot="R270"/>
<wire x1="21.23" y1="-5.5526" x2="21.23" y2="5.5726" width="0.2032" layer="41"/>
<wire x1="21.23" y1="5.5726" x2="30.765" y2="5.5726" width="0.2032" layer="41"/>
<wire x1="30.765" y1="5.5726" x2="30.765" y2="4.455" width="0.2032" layer="41"/>
<wire x1="30.765" y1="4.455" x2="34.2448" y2="4.455" width="0.2032" layer="41"/>
<wire x1="34.2448" y1="4.455" x2="34.2448" y2="-4.435" width="0.2032" layer="41"/>
<wire x1="34.2448" y1="-4.435" x2="30.765" y2="-4.435" width="0.2032" layer="41"/>
<wire x1="30.765" y1="-4.435" x2="30.765" y2="-5.5526" width="0.2032" layer="41"/>
<wire x1="30.765" y1="-5.5526" x2="21.23" y2="-5.5526" width="0.2032" layer="41"/>
<wire x1="21.23" y1="-5.5526" x2="21.23" y2="5.5726" width="0.2032" layer="21"/>
<wire x1="21.23" y1="5.5726" x2="30.765" y2="5.5726" width="0.2032" layer="21"/>
<wire x1="30.765" y1="5.5726" x2="30.765" y2="4.455" width="0.2032" layer="21"/>
<wire x1="30.765" y1="4.455" x2="34.2448" y2="4.455" width="0.2032" layer="21"/>
<wire x1="34.2448" y1="4.455" x2="34.2448" y2="-4.435" width="0.2032" layer="21"/>
<wire x1="34.2448" y1="-4.435" x2="30.765" y2="-4.435" width="0.2032" layer="21"/>
<wire x1="30.765" y1="-4.435" x2="30.765" y2="-5.5526" width="0.2032" layer="21"/>
<wire x1="30.765" y1="-5.5526" x2="21.23" y2="-5.5526" width="0.2032" layer="21"/>
<text x="-34.417" y="0" size="0.6096" layer="25" font="vector" ratio="20" rot="R90" align="bottom-center">&gt;NAME</text>
<text x="-27.94" y="0" size="0.6096" layer="27" font="vector" ratio="20" rot="R90" align="top-center">&gt;VALUE</text>
</package>
<package name="BATTCON-6.8MM">
<description>Part#: MS621FE-FL11E</description>
<circle x="0" y="0" radius="3.4" width="0.2032" layer="21"/>
<smd name="+" x="4.87" y="0.75" dx="2.25" dy="0.85" layer="1" rot="R180"/>
<smd name="-" x="4.87" y="-0.75" dx="2.25" dy="0.85" layer="1" rot="R180"/>
<circle x="0" y="0" radius="3.4" width="0.2032" layer="39"/>
<wire x1="5.9" y1="1" x2="5.9" y2="0.5" width="0.0762" layer="51"/>
<wire x1="5.9" y1="0.5" x2="3.6" y2="0.5" width="0.0762" layer="51"/>
<wire x1="3.6" y1="-0.5" x2="5.9" y2="-0.5" width="0.0762" layer="51"/>
<wire x1="5.9" y1="-0.5" x2="5.9" y2="-1" width="0.0762" layer="51"/>
<wire x1="3.6" y1="-0.5" x2="3.6" y2="0.5" width="0.0762" layer="51"/>
<wire x1="5.9" y1="1" x2="-3" y2="1" width="0.0762" layer="51"/>
<wire x1="-3" y1="1" x2="-3" y2="-1" width="0.0762" layer="51"/>
<wire x1="-3" y1="-1" x2="5.9" y2="-1" width="0.0762" layer="51"/>
<text x="-1.905" y="1.27" size="0.6096" layer="25" font="vector" ratio="20">&gt;Name</text>
<text x="-1.905" y="0" size="0.6096" layer="27" font="vector" ratio="20">&gt;Value</text>
</package>
<package name="BATTERY-AA-HOLDER-KIT">
<description>&lt;h3&gt;AA Battery Holder&lt;/h3&gt;
&lt;p&gt;PTH Single-cell AA battery holder&lt;/p&gt;
&lt;p&gt;&lt;a href="https://www.digikey.com/product-detail/en/keystone-electronics/2460/36-2460-ND/280629"&gt;Product Link&lt;/a&gt;&lt;/p&gt;
&lt;h4&gt;Devices Using&lt;/h4&gt;
&lt;ul&gt;&lt;li&gt;BATTERY&lt;/li&gt;&lt;/ul&gt;</description>
<wire x1="28.575" y1="-7.1755" x2="28.575" y2="7.3025" width="0.1778" layer="21"/>
<wire x1="28.575" y1="7.3025" x2="27.305" y2="8.5725" width="0.1778" layer="21" curve="90"/>
<wire x1="27.305" y1="8.5725" x2="-27.305" y2="8.5725" width="0.1778" layer="21"/>
<wire x1="-27.305" y1="8.5725" x2="-28.575" y2="7.3025" width="0.1778" layer="21" curve="90"/>
<wire x1="-28.575" y1="7.3025" x2="-28.575" y2="-7.1755" width="0.1778" layer="21"/>
<wire x1="-28.575" y1="-7.1755" x2="-27.305" y2="-8.4455" width="0.1778" layer="21" curve="90"/>
<wire x1="-27.305" y1="-8.4455" x2="27.305" y2="-8.4455" width="0.1778" layer="21"/>
<wire x1="27.305" y1="-8.4455" x2="28.575" y2="-7.1755" width="0.1778" layer="21" curve="90"/>
<wire x1="-31.75" y1="0" x2="-29.21" y2="0" width="0.4064" layer="21"/>
<wire x1="29.21" y1="0" x2="31.75" y2="0" width="0.4064" layer="21"/>
<wire x1="30.48" y1="1.27" x2="30.48" y2="-1.27" width="0.4064" layer="21"/>
<pad name="N" x="-25.4" y="0.254" drill="1.27" diameter="2.286" shape="long" stop="no"/>
<pad name="P" x="25.4" y="0.254" drill="1.27" diameter="2.286" shape="long" stop="no"/>
<polygon width="0.127" layer="29">
<vertex x="-26.0985" y="0.254" curve="-90"/>
<vertex x="-25.4" y="0.9525" curve="-90"/>
<vertex x="-24.7015" y="0.254" curve="-90"/>
<vertex x="-25.4" y="-0.4445" curve="-90"/>
</polygon>
<polygon width="0.127" layer="29">
<vertex x="24.7015" y="0.254" curve="-90"/>
<vertex x="25.4" y="0.9525" curve="-90"/>
<vertex x="26.0985" y="0.254" curve="-90"/>
<vertex x="25.4" y="-0.4445" curve="-90"/>
</polygon>
<polygon width="0.127" layer="30">
<vertex x="24.257" y="1.4605"/>
<vertex x="26.543" y="1.4605" curve="-90"/>
<vertex x="27.7495" y="0.254" curve="-90"/>
<vertex x="26.543" y="-0.9525"/>
<vertex x="24.257" y="-0.9525" curve="-90"/>
<vertex x="23.0505" y="0.254" curve="-90"/>
</polygon>
<polygon width="0.127" layer="30">
<vertex x="-26.543" y="1.4605"/>
<vertex x="-24.257" y="1.4605" curve="-90"/>
<vertex x="-23.0505" y="0.254" curve="-90"/>
<vertex x="-24.257" y="-0.9525"/>
<vertex x="-26.543" y="-0.9525" curve="-90"/>
<vertex x="-27.7495" y="0.254" curve="-90"/>
</polygon>
<dimension x1="-28.575" y1="7.3025" x2="28.575" y2="7.3025" x3="0" y3="26.035" textsize="1.27" layer="47" unit="inch"/>
<dimension x1="25.4" y1="0.254" x2="-25.4" y2="0.254" x3="0" y3="21.844" textsize="1.27" layer="47" unit="inch"/>
<dimension x1="27.305" y1="-8.4455" x2="27.305" y2="8.5725" x3="45.085" y3="0.0635" textsize="1.27" layer="47" unit="inch"/>
<text x="0" y="8.89" size="0.6096" layer="25" font="vector" ratio="20" align="bottom-center">&gt;NAME</text>
<text x="0" y="-9.525" size="0.6096" layer="27" font="vector" ratio="20" rot="R180" align="top-center">&gt;VALUE</text>
</package>
</packages>
<symbols>
<symbol name="BATTERY">
<description>&lt;h3&gt;Battery (Single-Cell)&lt;/h3&gt;</description>
<wire x1="-1.27" y1="3.81" x2="-1.27" y2="-3.81" width="0.4064" layer="94"/>
<wire x1="0" y1="1.27" x2="0" y2="-1.27" width="0.4064" layer="94"/>
<wire x1="1.27" y1="3.81" x2="1.27" y2="-3.81" width="0.4064" layer="94"/>
<wire x1="2.54" y1="1.27" x2="2.54" y2="-1.27" width="0.4064" layer="94"/>
<wire x1="-2.54" y1="0" x2="-1.524" y2="0" width="0.1524" layer="94"/>
<text x="0" y="4.318" size="1.778" layer="95" font="vector" align="bottom-center">&gt;NAME</text>
<text x="0" y="-4.318" size="1.778" layer="96" font="vector" align="top-center">&gt;VALUE</text>
<pin name="-" x="5.08" y="0" visible="off" length="short" direction="pwr" rot="R180"/>
<pin name="+" x="-5.08" y="0" visible="off" length="short" direction="pwr"/>
</symbol>
</symbols>
<devicesets>
<deviceset name="BATTERY" prefix="BT" uservalue="yes">
<description>&lt;h3&gt;Battery - Single Cell&lt;/h3&gt;
&lt;p&gt;A variety of battery chemistries, sizes, and footprints.&lt;/p&gt;
&lt;p&gt;Device List:
&lt;ul&gt;
&lt;li&gt;&lt;b&gt;20MM_PTH - &lt;/b&gt; &lt;a href="https://www.sparkfun.com/products/783"&gt;Coin Cell Battery Holder - 20mm (PTH)&lt;/a&gt;&lt;/li&gt;
&lt;li&gt;&lt;b&gt;6.8MM_PTH - &lt;/b&gt; &lt;a href="https://www.digikey.com/product-detail/en/seiko-instruments/MS621FE-FL11E/728-1057-ND/1889208?WT.srch=1&amp;gclid=CNOQ5a6LzdQCFZS2wAodXCkE0g"&gt;Coin Cell Battery Holder - 6.8MM(SMD)&lt;/a&gt;&lt;/li&gt;
&lt;li&gt;&lt;b&gt;12MM_SMD - &lt;/b&gt; &lt;a href="https://www.sparkfun.com/products/10592"&gt;Coin Cell Battery Holder - 12mm (SMD)&lt;/a&gt;&lt;/li&gt;
&lt;li&gt;&lt;b&gt;12MM_PTH - &lt;/b&gt;&lt;a href="https://www.sparkfun.com/products/7948"&gt;Coin Cell Battery Holder - 12mm (PTH)&lt;/a&gt;&lt;/li&gt;
&lt;li&gt;&lt;b&gt;20MM_SMD - &lt;/b&gt; 20mm Coin Cell Battery Holder (SMD) (2 legs)&lt;/li&gt;
&lt;ul&gt;&lt;li&gt;Used on the &lt;a href="https://www.sparkfun.com/products/11734"&gt;Big Time Watch Kit&lt;/a&gt;&lt;/li&gt;&lt;/ul&gt;
&lt;li&gt;&lt;b&gt;20MM_SMD_4LEGS - &lt;/b&gt; &lt;a href="https://www.sparkfun.com/products/11892"&gt;Coin Cell Battery Holder - 20mm (SMD)&lt;/a&gt;&lt;/li&gt;
&lt;li&gt;&lt;b&gt;20MM_SMD_4LEGS_OVERPASTE - &lt;/b&gt; &lt;a href="https://www.sparkfun.com/products/11892"&gt;Coin Cell Battery Holder - 20mm (SMD)&lt;/a&gt; (Over-paste on the legs)&lt;/li&gt;
&lt;li&gt;&lt;b&gt;24.5MM_PTH - &lt;/b&gt; &lt;a href="https://www.sparkfun.com/products/8863"&gt;Coin Cell Battery Holder - 24.5mm (PTH)&lt;/a&gt;&lt;/li&gt;
&lt;li&gt;&lt;b&gt;9V - &lt;/b&gt; 9V Battery Holder - PC Mount &lt;/li&gt;
&lt;ul&gt;&lt;li&gt;Used on the &lt;a href="https://www.sparkfun.com/products/11177"&gt;SparkFun SparkPunk Sound Kit &lt;/a&gt; and &lt;a href="https://www.sparkfun.com/products/12707"&gt;SparkFun SparkPunk Sequencer Kit &lt;/a&gt;&lt;/li&gt;&lt;/ul&gt;
&lt;li&gt;&lt;b&gt;18650 - &lt;/b&gt; &lt;a href="https://www.sparkfun.com/products/13113"&gt;Battery Holder - 18650 (PTH)&lt;/a&gt;&lt;/li&gt;
&lt;li&gt;&lt;b&gt;AA - &lt;/b&gt; &lt;a href="https://www.sparkfun.com/products/7949"&gt;Battery Holder - 1xAA (PTH)&lt;/a&gt;&lt;/li&gt;
&lt;li&gt;&lt;b&gt;AAA - &lt;/b&gt; &lt;a href="https://www.sparkfun.com/products/12718"&gt;Battery Holder - 1xAAA (PTH)&lt;/a&gt;&lt;/li&gt;
&lt;li&gt;&lt;b&gt;AA_KIT - &lt;/b&gt; &lt;a href="https://www.sparkfun.com/products/7949"&gt;Battery Holder - 1xAA (PTH)&lt;/a&gt;&lt;/li&gt;
&lt;ul&gt;&lt;li&gt;Special kit package - pads only have exposed copper on one side of the board.&lt;/li&gt;&lt;/ul&gt;
&lt;li&gt;&lt;b&gt;AAA_KIT - &lt;/b&gt; &lt;a href="https://www.sparkfun.com/products/12718"&gt;Battery Holder - 1xAAA (PTH)&lt;/a&gt;&lt;/li&gt;
&lt;ul&gt;&lt;li&gt;Special kit package - pads only have exposed copper on one side of the board.&lt;/li&gt;&lt;/ul&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<gates>
<gate name="G$1" symbol="BATTERY" x="0" y="0"/>
</gates>
<devices>
<device name="-AAA" package="BATTERY-AAA">
<connects>
<connect gate="G$1" pin="+" pad="PWR@1"/>
<connect gate="G$1" pin="-" pad="GND@1"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="BATT-08571"/>
<attribute name="SF_SKU" value="PRT-12718"/>
</technology>
</technologies>
</device>
<device name="-AA" package="BATTERY-AA">
<connects>
<connect gate="G$1" pin="+" pad="PWR@1"/>
<connect gate="G$1" pin="-" pad="GND@1"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="BATT-08316"/>
<attribute name="SF_SKU" value="PRT-07949"/>
</technology>
</technologies>
</device>
<device name="-12MM_PTH" package="BATTCON_12MM_PTH">
<connects>
<connect gate="G$1" pin="+" pad="VCC@1"/>
<connect gate="G$1" pin="-" pad="GND"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="BATT-08315"/>
<attribute name="SF_SKU" value="PRT-07948"/>
</technology>
</technologies>
</device>
<device name="-20MM_SMD" package="BATTCON_20MM">
<connects>
<connect gate="G$1" pin="+" pad="1"/>
<connect gate="G$1" pin="-" pad="2"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="BATT-11519"/>
</technology>
</technologies>
</device>
<device name="-20MM_PTH" package="BATTCOM_20MM_PTH">
<connects>
<connect gate="G$1" pin="+" pad="1"/>
<connect gate="G$1" pin="-" pad="2"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="BATT-09031"/>
<attribute name="SF_SKU" value="PRT-00783"/>
</technology>
</technologies>
</device>
<device name="-24.5MM_PTH" package="BATTCON_24.5MM_PTH">
<connects>
<connect gate="G$1" pin="+" pad="3"/>
<connect gate="G$1" pin="-" pad="2"/>
</connects>
<technologies>
<technology name="">
<attribute name="SF_SKU" value="PRT-08863"/>
</technology>
</technologies>
</device>
<device name="-12MM_SMD" package="BATTCON_12MM">
<connects>
<connect gate="G$1" pin="+" pad="PWR@1"/>
<connect gate="G$1" pin="-" pad="GND"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="BATT-08044"/>
<attribute name="SF_SKU" value="PRT-10592"/>
</technology>
</technologies>
</device>
<device name="-20MM_SMD_4LEGS" package="BATTCON_20MM_4LEGS">
<connects>
<connect gate="G$1" pin="+" pad="POSITIVE@1 POSITIVE@2 POSITIVE@3 POSITIVE@4"/>
<connect gate="G$1" pin="-" pad="NEGATIVE"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="BATT-10373"/>
<attribute name="SF_SKU" value="PRT-11892"/>
</technology>
</technologies>
</device>
<device name="-AA_KIT" package="BATTERY-AA-KIT">
<connects>
<connect gate="G$1" pin="+" pad="PWR@1"/>
<connect gate="G$1" pin="-" pad="GND@1"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="BATT-08316"/>
<attribute name="SF_SKU" value="PRT-07949"/>
</technology>
</technologies>
</device>
<device name="-9V" package="BATTCON_9V">
<connects>
<connect gate="G$1" pin="+" pad="+"/>
<connect gate="G$1" pin="-" pad="-"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="BATT-10855"/>
</technology>
</technologies>
</device>
<device name="-20MM_SMD_4LEGS_OVERPASTE" package="BATTCON_20MM_4LEGS_OVERPASTE">
<connects>
<connect gate="G$1" pin="+" pad="1"/>
<connect gate="G$1" pin="-" pad="2"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="PRT-11892 "/>
<attribute name="SF_SKU" value="BATT-10373"/>
</technology>
</technologies>
</device>
<device name="-AAA_KIT" package="BATTERY-AAA-KIT">
<connects>
<connect gate="G$1" pin="+" pad="PWR@1"/>
<connect gate="G$1" pin="-" pad="GND@1"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="BATT-08571"/>
<attribute name="SF_SKU" value="PRT-12718"/>
</technology>
</technologies>
</device>
<device name="-18650" package="BATTERY_18650-HOLDER">
<connects>
<connect gate="G$1" pin="+" pad="PWR@1"/>
<connect gate="G$1" pin="-" pad="GND@1"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="BATT-12327"/>
<attribute name="SF_SKU" value="PRT-13113"/>
</technology>
</technologies>
</device>
<device name="-6.8MM_SMD" package="BATTCON-6.8MM">
<connects>
<connect gate="G$1" pin="+" pad="+"/>
<connect gate="G$1" pin="-" pad="-"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="BATT-13734" constant="no"/>
<attribute name="VALUE" value="6.8MM_COIN_CELL" constant="no"/>
</technology>
</technologies>
</device>
<device name="-AA-HOLDER_KIT" package="BATTERY-AA-HOLDER-KIT">
<connects>
<connect gate="G$1" pin="+" pad="P"/>
<connect gate="G$1" pin="-" pad="N"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
</devicesets>
</library>
<library name="mfrc522-module">
<packages>
<package name="RFID-RC522">
<description>&lt;b&gt;PIN HEADER&lt;/b&gt;</description>
<wire x1="3.175" y1="1.27" x2="4.445" y2="1.27" width="0.1524" layer="21"/>
<wire x1="4.445" y1="1.27" x2="5.08" y2="0.635" width="0.1524" layer="21"/>
<wire x1="5.08" y1="0.635" x2="5.08" y2="-0.635" width="0.1524" layer="21"/>
<wire x1="5.08" y1="-0.635" x2="4.445" y2="-1.27" width="0.1524" layer="21"/>
<wire x1="5.08" y1="0.635" x2="5.715" y2="1.27" width="0.1524" layer="21"/>
<wire x1="5.715" y1="1.27" x2="6.985" y2="1.27" width="0.1524" layer="21"/>
<wire x1="6.985" y1="1.27" x2="7.62" y2="0.635" width="0.1524" layer="21"/>
<wire x1="7.62" y1="0.635" x2="7.62" y2="-0.635" width="0.1524" layer="21"/>
<wire x1="7.62" y1="-0.635" x2="6.985" y2="-1.27" width="0.1524" layer="21"/>
<wire x1="6.985" y1="-1.27" x2="5.715" y2="-1.27" width="0.1524" layer="21"/>
<wire x1="5.715" y1="-1.27" x2="5.08" y2="-0.635" width="0.1524" layer="21"/>
<wire x1="0" y1="0.635" x2="0.635" y2="1.27" width="0.1524" layer="21"/>
<wire x1="0.635" y1="1.27" x2="1.905" y2="1.27" width="0.1524" layer="21"/>
<wire x1="1.905" y1="1.27" x2="2.54" y2="0.635" width="0.1524" layer="21"/>
<wire x1="2.54" y1="0.635" x2="2.54" y2="-0.635" width="0.1524" layer="21"/>
<wire x1="2.54" y1="-0.635" x2="1.905" y2="-1.27" width="0.1524" layer="21"/>
<wire x1="1.905" y1="-1.27" x2="0.635" y2="-1.27" width="0.1524" layer="21"/>
<wire x1="0.635" y1="-1.27" x2="0" y2="-0.635" width="0.1524" layer="21"/>
<wire x1="3.175" y1="1.27" x2="2.54" y2="0.635" width="0.1524" layer="21"/>
<wire x1="2.54" y1="-0.635" x2="3.175" y2="-1.27" width="0.1524" layer="21"/>
<wire x1="4.445" y1="-1.27" x2="3.175" y2="-1.27" width="0.1524" layer="21"/>
<wire x1="-1.905" y1="1.27" x2="-0.635" y2="1.27" width="0.1524" layer="21"/>
<wire x1="-0.635" y1="1.27" x2="0" y2="0.635" width="0.1524" layer="21"/>
<wire x1="0" y1="-0.635" x2="-0.635" y2="-1.27" width="0.1524" layer="21"/>
<wire x1="0" y1="0.635" x2="0" y2="-0.635" width="0.1524" layer="21"/>
<wire x1="-5.08" y1="0.635" x2="-4.445" y2="1.27" width="0.1524" layer="21"/>
<wire x1="-4.445" y1="1.27" x2="-3.175" y2="1.27" width="0.1524" layer="21"/>
<wire x1="-3.175" y1="1.27" x2="-2.54" y2="0.635" width="0.1524" layer="21"/>
<wire x1="-2.54" y1="0.635" x2="-2.54" y2="-0.635" width="0.1524" layer="21"/>
<wire x1="-2.54" y1="-0.635" x2="-3.175" y2="-1.27" width="0.1524" layer="21"/>
<wire x1="-3.175" y1="-1.27" x2="-4.445" y2="-1.27" width="0.1524" layer="21"/>
<wire x1="-4.445" y1="-1.27" x2="-5.08" y2="-0.635" width="0.1524" layer="21"/>
<wire x1="-1.905" y1="1.27" x2="-2.54" y2="0.635" width="0.1524" layer="21"/>
<wire x1="-2.54" y1="-0.635" x2="-1.905" y2="-1.27" width="0.1524" layer="21"/>
<wire x1="-0.635" y1="-1.27" x2="-1.905" y2="-1.27" width="0.1524" layer="21"/>
<wire x1="-9.525" y1="1.27" x2="-8.255" y2="1.27" width="0.1524" layer="21"/>
<wire x1="-8.255" y1="1.27" x2="-7.62" y2="0.635" width="0.1524" layer="21"/>
<wire x1="-7.62" y1="0.635" x2="-7.62" y2="-0.635" width="0.1524" layer="21"/>
<wire x1="-7.62" y1="-0.635" x2="-8.255" y2="-1.27" width="0.1524" layer="21"/>
<wire x1="-7.62" y1="0.635" x2="-6.985" y2="1.27" width="0.1524" layer="21"/>
<wire x1="-6.985" y1="1.27" x2="-5.715" y2="1.27" width="0.1524" layer="21"/>
<wire x1="-5.715" y1="1.27" x2="-5.08" y2="0.635" width="0.1524" layer="21"/>
<wire x1="-5.08" y1="0.635" x2="-5.08" y2="-0.635" width="0.1524" layer="21"/>
<wire x1="-5.08" y1="-0.635" x2="-5.715" y2="-1.27" width="0.1524" layer="21"/>
<wire x1="-5.715" y1="-1.27" x2="-6.985" y2="-1.27" width="0.1524" layer="21"/>
<wire x1="-6.985" y1="-1.27" x2="-7.62" y2="-0.635" width="0.1524" layer="21"/>
<wire x1="-10.16" y1="0.635" x2="-10.16" y2="-0.635" width="0.1524" layer="21"/>
<wire x1="-9.525" y1="1.27" x2="-10.16" y2="0.635" width="0.1524" layer="21"/>
<wire x1="-10.16" y1="-0.635" x2="-9.525" y2="-1.27" width="0.1524" layer="21"/>
<wire x1="-8.255" y1="-1.27" x2="-9.525" y2="-1.27" width="0.1524" layer="21"/>
<wire x1="8.255" y1="1.27" x2="9.525" y2="1.27" width="0.1524" layer="21"/>
<wire x1="9.525" y1="1.27" x2="10.16" y2="0.635" width="0.1524" layer="21"/>
<wire x1="10.16" y1="0.635" x2="10.16" y2="-0.635" width="0.1524" layer="21"/>
<wire x1="10.16" y1="-0.635" x2="9.525" y2="-1.27" width="0.1524" layer="21"/>
<wire x1="8.255" y1="1.27" x2="7.62" y2="0.635" width="0.1524" layer="21"/>
<wire x1="7.62" y1="-0.635" x2="8.255" y2="-1.27" width="0.1524" layer="21"/>
<wire x1="9.525" y1="-1.27" x2="8.255" y2="-1.27" width="0.1524" layer="21"/>
<pad name="3V3" x="-8.89" y="0" drill="1.016" shape="long" rot="R90"/>
<pad name="RST" x="-6.35" y="0" drill="1.016" shape="long" rot="R90"/>
<pad name="GND" x="-3.81" y="0" drill="1.016" shape="long" rot="R90"/>
<pad name="IRQ" x="-1.27" y="0" drill="1.016" shape="long" rot="R90"/>
<pad name="MISO" x="1.27" y="0" drill="1.016" shape="long" rot="R90"/>
<pad name="MOSI" x="3.81" y="0" drill="1.016" shape="long" rot="R90"/>
<pad name="SCK" x="6.35" y="0" drill="1.016" shape="long" rot="R90"/>
<pad name="SS" x="8.89" y="0" drill="1.016" shape="long" rot="R90"/>
<text x="-19.0062" y="3.8288" size="1.27" layer="25" ratio="10">&gt;NAME</text>
<text x="12.57" y="3.825" size="1.27" layer="27">&gt;VALUE</text>
<rectangle x1="6.096" y1="-0.254" x2="6.604" y2="0.254" layer="51"/>
<rectangle x1="3.556" y1="-0.254" x2="4.064" y2="0.254" layer="51"/>
<rectangle x1="1.016" y1="-0.254" x2="1.524" y2="0.254" layer="51"/>
<rectangle x1="-1.524" y1="-0.254" x2="-1.016" y2="0.254" layer="51"/>
<rectangle x1="-4.064" y1="-0.254" x2="-3.556" y2="0.254" layer="51"/>
<rectangle x1="-6.604" y1="-0.254" x2="-6.096" y2="0.254" layer="51"/>
<rectangle x1="-9.144" y1="-0.254" x2="-8.636" y2="0.254" layer="51"/>
<rectangle x1="8.636" y1="-0.254" x2="9.144" y2="0.254" layer="51"/>
<wire x1="-19.5" y1="3" x2="19.5" y2="3" width="0.127" layer="23"/>
<wire x1="19.5" y1="3" x2="19.5" y2="-57" width="0.127" layer="23"/>
<wire x1="19.5" y1="-57" x2="-19.5" y2="-57" width="0.127" layer="23"/>
<wire x1="-19.5" y1="-57" x2="-19.5" y2="3" width="0.127" layer="23"/>
<circle x="0" y="-39.5" radius="0.70710625" width="0.127" layer="23"/>
<wire x1="2" y1="-38.5" x2="2" y2="-40.5" width="0.127" layer="23" curve="-53.130102"/>
<wire x1="3" y1="-37.5" x2="3" y2="-41.5" width="0.127" layer="23" curve="-67.380135"/>
<wire x1="4" y1="-36.5" x2="4" y2="-42.5" width="0.127" layer="23" curve="-77.319617"/>
<wire x1="5" y1="-35.5" x2="5" y2="-43.5" width="0.127" layer="23" curve="-83.64034"/>
<wire x1="6" y1="-34.5" x2="6" y2="-44.5" width="0.127" layer="23" curve="-82.37185"/>
<wire x1="-2" y1="-40.5" x2="-2" y2="-38.5" width="0.127" layer="23" curve="-53.130102"/>
<wire x1="-3" y1="-41.5" x2="-3" y2="-37.5" width="0.127" layer="23" curve="-67.380135"/>
<wire x1="-4" y1="-42.5" x2="-4" y2="-36.5" width="0.127" layer="23" curve="-77.319617"/>
<wire x1="-5" y1="-43.5" x2="-5" y2="-35.5" width="0.127" layer="23" curve="-83.64034"/>
<wire x1="-6" y1="-44.5" x2="-6" y2="-34.5" width="0.127" layer="23" curve="-82.37185"/>
</package>
</packages>
<symbols>
<symbol name="RFID-RC522">
<wire x1="-8.89" y1="-11.43" x2="21.59" y2="-11.43" width="0.4064" layer="94"/>
<wire x1="21.59" y1="-11.43" x2="21.59" y2="11.43" width="0.4064" layer="94"/>
<wire x1="21.59" y1="11.43" x2="-8.89" y2="11.43" width="0.4064" layer="94"/>
<wire x1="-8.89" y1="11.43" x2="-8.89" y2="-11.43" width="0.4064" layer="94"/>
<text x="-3.81" y="13.335" size="1.778" layer="95">&gt;NAME</text>
<text x="-3.81" y="-15.24" size="1.778" layer="96">&gt;VALUE</text>
<pin name="1" x="-2.54" y="8.89" visible="pad" length="short" direction="pas" function="dot"/>
<pin name="2" x="-2.54" y="6.35" visible="pad" length="short" direction="pas" function="dot"/>
<pin name="3" x="-2.54" y="3.81" visible="pad" length="short" direction="pas" function="dot"/>
<pin name="4" x="-2.54" y="1.27" visible="pad" length="short" direction="pas" function="dot"/>
<pin name="5" x="-2.54" y="-1.27" visible="pad" length="short" direction="pas" function="dot"/>
<pin name="6" x="-2.54" y="-3.81" visible="pad" length="short" direction="pas" function="dot"/>
<pin name="7" x="-2.54" y="-6.35" visible="pad" length="short" direction="pas" function="dot"/>
<pin name="8" x="-2.54" y="-8.89" visible="pad" length="short" direction="pas" function="dot"/>
<circle x="10.922" y="0" radius="0.359209375" width="0.254" layer="94"/>
<wire x1="11.684" y1="1.016" x2="11.684" y2="-1.016" width="0.254" layer="94" curve="-106.260205"/>
<wire x1="12.7" y1="2.032" x2="12.7" y2="-2.032" width="0.254" layer="94" curve="-97.62815"/>
<wire x1="13.716" y1="3.048" x2="13.716" y2="-3.048" width="0.254" layer="94" curve="-104.862816"/>
<wire x1="10.16" y1="-1.016" x2="10.16" y2="1.016" width="0.254" layer="94" curve="-106.260205"/>
<wire x1="9.144" y1="-2.032" x2="9.144" y2="2.032" width="0.254" layer="94" curve="-97.62815"/>
<wire x1="8.128" y1="-3.048" x2="8.128" y2="3.048" width="0.254" layer="94" curve="-104.862816"/>
<text x="4.572" y="-5.08" size="1.27" layer="94">RFID - RC522</text>
</symbol>
</symbols>
<devicesets>
<deviceset name="RFID-RC522" prefix="M" uservalue="yes">
<description>&lt;b&gt;RFID-RC522&lt;/b&gt;&lt;p&gt;

MFRC-522 based breakout board</description>
<gates>
<gate name="A" symbol="RFID-RC522" x="0" y="0"/>
</gates>
<devices>
<device name="" package="RFID-RC522">
<connects>
<connect gate="A" pin="1" pad="3V3"/>
<connect gate="A" pin="2" pad="RST"/>
<connect gate="A" pin="3" pad="GND"/>
<connect gate="A" pin="4" pad="IRQ"/>
<connect gate="A" pin="5" pad="MISO"/>
<connect gate="A" pin="6" pad="MOSI"/>
<connect gate="A" pin="7" pad="SCK"/>
<connect gate="A" pin="8" pad="SS"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
</devicesets>
</library>
<library name="AMS1117-3.3">
<packages>
<package name="SOT229P700X180-4N">
<wire x1="-3.36" y1="-1.86" x2="-3.36" y2="1.86" width="0.127" layer="51"/>
<wire x1="-3.36" y1="1.86" x2="3.36" y2="1.86" width="0.127" layer="51"/>
<wire x1="3.36" y1="1.86" x2="3.36" y2="-1.86" width="0.127" layer="51"/>
<wire x1="3.36" y1="-1.86" x2="-3.36" y2="-1.86" width="0.127" layer="51"/>
<wire x1="-3.36" y1="-1.86" x2="-3.36" y2="1.86" width="0.127" layer="21"/>
<wire x1="3.36" y1="-1.86" x2="3.36" y2="1.86" width="0.127" layer="21"/>
<wire x1="-3.36" y1="-1.86" x2="-3.1" y2="-1.86" width="0.127" layer="21"/>
<wire x1="3.11" y1="-1.86" x2="3.36" y2="-1.86" width="0.127" layer="21"/>
<wire x1="3.36" y1="1.86" x2="1.87" y2="1.86" width="0.127" layer="21"/>
<wire x1="-1.76" y1="1.86" x2="-3.36" y2="1.86" width="0.127" layer="21"/>
<circle x="-2.29" y="-4.373" radius="0.1" width="0.2" layer="21"/>
<text x="-3.703940625" y="4.517" size="1.274790625" layer="25">&gt;NAME</text>
<text x="-3.69858125" y="-6.17433125" size="1.272959375" layer="27">&gt;VALUE</text>
<wire x1="-3.61" y1="2.11" x2="-3.61" y2="-2.11" width="0.05" layer="39"/>
<wire x1="-3.61" y1="-2.11" x2="-3.01" y2="-2.11" width="0.05" layer="39"/>
<wire x1="-3.01" y1="-2.11" x2="-3.01" y2="-4.25" width="0.05" layer="39"/>
<wire x1="-3.01" y1="-4.25" x2="3.01" y2="-4.25" width="0.05" layer="39"/>
<wire x1="3.01" y1="-4.25" x2="3.01" y2="-2.11" width="0.05" layer="39"/>
<wire x1="3.01" y1="-2.11" x2="3.61" y2="-2.11" width="0.05" layer="39"/>
<wire x1="3.61" y1="-2.11" x2="3.61" y2="2.11" width="0.05" layer="39"/>
<wire x1="3.61" y1="2.11" x2="1.87" y2="2.11" width="0.05" layer="39"/>
<wire x1="1.87" y1="2.11" x2="1.87" y2="4.25" width="0.05" layer="39"/>
<wire x1="1.87" y1="4.25" x2="-1.87" y2="4.25" width="0.05" layer="39"/>
<wire x1="-1.87" y1="4.25" x2="-1.87" y2="2.11" width="0.05" layer="39"/>
<wire x1="-1.87" y1="2.11" x2="-3.61" y2="2.11" width="0.05" layer="39"/>
<smd name="1" x="-2.29" y="-3.345" dx="0.93" dy="1.31" layer="1" roundness="15"/>
<smd name="2" x="0" y="-3.345" dx="0.93" dy="1.31" layer="1" roundness="15"/>
<smd name="3" x="2.29" y="-3.345" dx="0.93" dy="1.31" layer="1" roundness="15"/>
<smd name="4" x="0" y="3.345" dx="3.24" dy="1.31" layer="1" roundness="15"/>
</package>
</packages>
<symbols>
<symbol name="AMS1117-3.3">
<wire x1="-10.16" y1="5.08" x2="10.16" y2="5.08" width="0.254" layer="94"/>
<wire x1="10.16" y1="5.08" x2="10.16" y2="-5.08" width="0.254" layer="94"/>
<wire x1="10.16" y1="-5.08" x2="-10.16" y2="-5.08" width="0.254" layer="94"/>
<wire x1="-10.16" y1="-5.08" x2="-10.16" y2="5.08" width="0.254" layer="94"/>
<text x="-10.1837" y="5.60105" size="2.54593125" layer="95">&gt;NAME</text>
<text x="-10.1792" y="-8.14333125" size="2.544790625" layer="96">&gt;VALUE</text>
<pin name="VIN" x="-15.24" y="2.54" length="middle" direction="in"/>
<pin name="VOUT" x="15.24" y="2.54" length="middle" direction="out" rot="R180"/>
<pin name="ADJ/GND" x="15.24" y="-2.54" length="middle" direction="pwr" rot="R180"/>
</symbol>
</symbols>
<devicesets>
<deviceset name="AMS1117-3.3" prefix="U">
<description>Sot223/Pkg 1-Amp 3.3-Volt Low Drop Out Voltage Regulatator</description>
<gates>
<gate name="G$1" symbol="AMS1117-3.3" x="0" y="0"/>
</gates>
<devices>
<device name="" package="SOT229P700X180-4N">
<connects>
<connect gate="G$1" pin="ADJ/GND" pad="1"/>
<connect gate="G$1" pin="VIN" pad="3"/>
<connect gate="G$1" pin="VOUT" pad="2"/>
</connects>
<technologies>
<technology name="">
<attribute name="AVAILABILITY" value="Unavailable"/>
<attribute name="DESCRIPTION" value=" Sot-89 "/>
<attribute name="MF" value="ams"/>
<attribute name="MP" value="AMS1117-3.3"/>
<attribute name="PACKAGE" value="SOT-89 ams"/>
<attribute name="PRICE" value="None"/>
</technology>
</technologies>
</device>
</devices>
</deviceset>
</devicesets>
</library>
<library name="SparkFun-Fuses" urn="urn:adsk.eagle:library:517">
<description>&lt;h3&gt;SparkFun Fuses&lt;/h3&gt;
In this library you'll find fuses, or fuse like components such as PTCs. Reference designator F.
&lt;br&gt;
&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is &lt;b&gt; the end user's responsibility&lt;/b&gt; to ensure correctness and suitablity for a given componet or application. 
&lt;br&gt;
&lt;br&gt;If you enjoy using this library, please buy one of our products at &lt;a href=" www.sparkfun.com"&gt;SparkFun.com&lt;/a&gt;.
&lt;br&gt;
&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;
&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="PTH" urn="urn:adsk.eagle:footprint:38571/1" library_version="1">
<description>Two 0.8 mm PTHs spaced 0.2 in apart for through hole parts.</description>
<wire x1="-3.81" y1="1.524" x2="3.81" y2="1.524" width="0.2032" layer="21"/>
<wire x1="3.81" y1="1.524" x2="3.81" y2="-1.524" width="0.2032" layer="21"/>
<wire x1="3.81" y1="-1.524" x2="-3.81" y2="-1.524" width="0.2032" layer="21"/>
<wire x1="-3.81" y1="-1.524" x2="-3.81" y2="1.524" width="0.2032" layer="21"/>
<pad name="P$1" x="-2.54" y="0" drill="0.8" diameter="1.8796"/>
<pad name="P$2" x="2.54" y="0" drill="0.8" diameter="1.8796"/>
<text x="0" y="1.778" size="0.6096" layer="25" font="vector" ratio="20" align="bottom-center">&gt;Name</text>
<text x="0" y="-1.778" size="0.6096" layer="27" font="vector" ratio="20" align="top-center">&gt;Value</text>
</package>
<package name="1206" urn="urn:adsk.eagle:footprint:38572/1" library_version="1">
<description>&lt;p&gt;&lt;b&gt;Generic 3216 (1206) package&lt;/b&gt;&lt;/p&gt;
&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>
<wire x1="-2.4" y1="1.1" x2="2.4" y2="1.1" width="0.0508" layer="39"/>
<wire x1="2.4" y1="-1.1" x2="-2.4" y2="-1.1" width="0.0508" layer="39"/>
<wire x1="-2.4" y1="-1.1" x2="-2.4" y2="1.1" width="0.0508" layer="39"/>
<wire x1="2.4" y1="1.1" x2="2.4" y2="-1.1" width="0.0508" layer="39"/>
<wire x1="-0.965" y1="0.787" x2="0.965" y2="0.787" width="0.1016" layer="51"/>
<wire x1="-0.965" y1="-0.787" x2="0.965" y2="-0.787" width="0.1016" layer="51"/>
<smd name="1" x="-1.4" y="0" dx="1.6" dy="1.8" layer="1"/>
<smd name="2" x="1.4" y="0" dx="1.6" dy="1.8" layer="1"/>
<text x="0" y="1.143" size="0.6096" layer="25" font="vector" ratio="20" align="bottom-center">&gt;NAME</text>
<text x="0" y="-1.143" size="0.6096" layer="27" font="vector" ratio="20" align="top-center">&gt;VALUE</text>
<rectangle x1="-1.7018" y1="-0.8509" x2="-0.9517" y2="0.8491" layer="51"/>
<rectangle x1="0.9517" y1="-0.8491" x2="1.7018" y2="0.8509" layer="51"/>
<rectangle x1="-0.1999" y1="-0.4001" x2="0.1999" y2="0.4001" layer="35"/>
</package>
</packages>
<packages3d>
<package3d name="PTH" urn="urn:adsk.eagle:package:38574/1" type="box" library_version="1">
<description>Two 0.8 mm PTHs spaced 0.2 in apart for through hole parts.</description>
<packageinstances>
<packageinstance name="PTH"/>
</packageinstances>
</package3d>
<package3d name="1206" urn="urn:adsk.eagle:package:38575/1" type="box" library_version="1">
<description>Generic 3216 (1206) package
0.2mm courtyard excess rounded to nearest 0.05mm.</description>
<packageinstances>
<packageinstance name="1206"/>
</packageinstances>
</package3d>
</packages3d>
<symbols>
<symbol name="PPTC" urn="urn:adsk.eagle:symbol:38570/1" library_version="1">
<description>A polymeric positive temperature coefficient device (PPTC, commonly known as a resettable fuse, polyfuse or polyswitch) is a passive electronic component used to protect against overcurrent faults in electronic circuits. - Wikipedia</description>
<wire x1="5.08" y1="1.27" x2="5.08" y2="-1.27" width="0.1524" layer="94"/>
<wire x1="5.08" y1="-1.27" x2="-2.54" y2="-1.27" width="0.1524" layer="94"/>
<wire x1="-2.54" y1="-1.27" x2="-2.54" y2="1.27" width="0.1524" layer="94"/>
<wire x1="-2.54" y1="1.27" x2="5.08" y2="1.27" width="0.1524" layer="94"/>
<wire x1="-1.524" y1="-2.54" x2="3.81" y2="2.54" width="0.1524" layer="94"/>
<wire x1="3.81" y1="2.54" x2="5.08" y2="2.54" width="0.1524" layer="94"/>
<text x="1.905" y="3.175" size="1.778" layer="95" font="vector" align="bottom-center">&gt;NAME</text>
<text x="1.27" y="-2.794" size="1.778" layer="96" font="vector" align="top-center">&gt;VALUE</text>
<pin name="1" x="-5.08" y="0" visible="off" length="short"/>
<pin name="2" x="7.62" y="0" visible="off" length="short" rot="R180"/>
</symbol>
</symbols>
<devicesets>
<deviceset name="PPTC" urn="urn:adsk.eagle:component:38576/1" prefix="F" library_version="1">
<description>&lt;h3&gt;Resettable Fuse PPTC&lt;/h3&gt;
&lt;p&gt;Resettable Fuse. Really a sort of resistor with a &lt;b&gt;p&lt;/b&gt;olymeric &lt;b&gt;p&lt;/b&gt;ositive &lt;b&gt;t&lt;/b&gt;emperature &lt;b&gt;c&lt;/b&gt;oefficient whose resistance increases dramatically with an increase in temperature. When heated by the power passing through the resistance rises causing the current to be limited, protecting the circuit. This is achieved by the transition of the polymer from a crystalline to an amorphous state where the conductive carbon separates breaking the conductive pathways found in the cool crystalline structure. When a PPTC cools back down it resumes conducting letting the circuit turn back on.&lt;/p&gt;
&lt;p&gt;SparkFun Products:
&lt;ul&gt;&lt;li&gt;&lt;a href="https://www.sparkfun.com/products/12757"&gt;SparkFun RedBoard - Programmed with Arduino&lt;/a&gt;&lt;/li&gt;
&lt;li&gt;&lt;a href="https://www.sparkfun.com/products/12640"&gt;Pro Micro - 5V/16MHz&lt;/a&gt;&lt;/li&gt;
&lt;li&gt;&lt;a href="https://www.sparkfun.com/products/10915"&gt;Arduino Pro 328 - 5V/16MHz&lt;/a&gt;&lt;/li&gt;
&lt;li&gt;&lt;a href="https://www.sparkfun.com/products/13720"&gt;MP3 Trigger&lt;/a&gt;&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<gates>
<gate name="G$1" symbol="PPTC" x="0" y="0"/>
</gates>
<devices>
<device name="_PTH" package="PTH">
<connects>
<connect gate="G$1" pin="1" pad="P$1"/>
<connect gate="G$1" pin="2" pad="P$2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38574/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="RES-08490"/>
<attribute name="VALUE" value="72V/0.25A"/>
</technology>
</technologies>
</device>
<device name="_HALF-AMP" package="1206">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38575/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="RES-08585"/>
<attribute name="VALUE" value="6V/0.5A"/>
</technology>
</technologies>
</device>
<device name="_THREE-QUARTER-AMP" package="1206">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:38575/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="RES-11150"/>
<attribute name="VALUE" value="6V/0.75A"/>
</technology>
</technologies>
</device>
</devices>
</deviceset>
</devicesets>
</library>
<library name="BC847">
<packages>
<package name="SOT23">
<description>&lt;b&gt;SOT-23&lt;/b&gt;</description>
<wire x1="1.4224" y1="0.6604" x2="1.4224" y2="-0.6604" width="0.1524" layer="51"/>
<wire x1="1.4224" y1="-0.6604" x2="-1.4224" y2="-0.6604" width="0.1524" layer="51"/>
<wire x1="-1.4224" y1="-0.6604" x2="-1.4224" y2="0.6604" width="0.1524" layer="51"/>
<wire x1="-1.4224" y1="0.6604" x2="1.4224" y2="0.6604" width="0.1524" layer="51"/>
<text x="-1.907109375" y="1.907109375" size="1.2714" layer="25">&gt;NAME</text>
<text x="-1.908590625" y="-3.18096875" size="1.272390625" layer="27">&gt;VALUE</text>
<rectangle x1="-0.229075" y1="0.71268125" x2="0.2286" y2="1.2954" layer="51"/>
<rectangle x1="0.711971875" y1="-1.296809375" x2="1.1684" y2="-0.7112" layer="51"/>
<rectangle x1="-1.172059375" y1="-1.299459375" x2="-0.7112" y2="-0.7112" layer="51"/>
<smd name="3" x="0" y="1.1" dx="1" dy="1.4" layer="1"/>
<smd name="2" x="0.95" y="-1.1" dx="1" dy="1.4" layer="1"/>
<smd name="1" x="-0.95" y="-1.1" dx="1" dy="1.4" layer="1"/>
</package>
</packages>
<symbols>
<symbol name="NPN">
<wire x1="2.54" y1="2.54" x2="0.508" y2="1.524" width="0.1524" layer="94"/>
<wire x1="1.778" y1="-1.524" x2="2.54" y2="-2.54" width="0.1524" layer="94"/>
<wire x1="2.54" y1="-2.54" x2="1.27" y2="-2.54" width="0.1524" layer="94"/>
<wire x1="1.27" y1="-2.54" x2="1.778" y2="-1.524" width="0.1524" layer="94"/>
<wire x1="1.54" y1="-2.04" x2="0.308" y2="-1.424" width="0.1524" layer="94"/>
<wire x1="1.524" y1="-2.413" x2="2.286" y2="-2.413" width="0.254" layer="94"/>
<wire x1="2.286" y1="-2.413" x2="1.778" y2="-1.778" width="0.254" layer="94"/>
<wire x1="1.778" y1="-1.778" x2="1.524" y2="-2.286" width="0.254" layer="94"/>
<wire x1="1.524" y1="-2.286" x2="1.905" y2="-2.286" width="0.254" layer="94"/>
<wire x1="1.905" y1="-2.286" x2="1.778" y2="-2.032" width="0.254" layer="94"/>
<text x="-10.1862" y="7.63966875" size="1.782590625" layer="95">&gt;NAME</text>
<text x="-10.1799" y="5.089940625" size="1.78148125" layer="96">&gt;VALUE</text>
<rectangle x1="-0.254303125" y1="-2.543040625" x2="0.508" y2="2.54" layer="94"/>
<pin name="B" x="-2.54" y="0" visible="off" length="short" direction="pas" swaplevel="1"/>
<pin name="E" x="2.54" y="-5.08" visible="off" length="short" direction="pas" swaplevel="3" rot="R90"/>
<pin name="C" x="2.54" y="5.08" visible="off" length="short" direction="pas" swaplevel="2" rot="R270"/>
</symbol>
</symbols>
<devicesets>
<deviceset name="BC847" prefix="T">
<description>&lt;b&gt;NPN TRANSISTOR&lt;/b&gt;</description>
<gates>
<gate name="G$1" symbol="NPN" x="0" y="0"/>
</gates>
<devices>
<device name="" package="SOT23">
<connects>
<connect gate="G$1" pin="B" pad="1"/>
<connect gate="G$1" pin="C" pad="3"/>
<connect gate="G$1" pin="E" pad="2"/>
</connects>
<technologies>
<technology name="">
<attribute name="AVAILABILITY" value="Unavailable"/>
<attribute name="DESCRIPTION" value=" "/>
<attribute name="MF" value="Rectron"/>
<attribute name="MP" value="BC847"/>
<attribute name="PACKAGE" value="None"/>
<attribute name="PRICE" value="None"/>
</technology>
</technologies>
</device>
</devices>
</deviceset>
</devicesets>
</library>
<library name="SparkFun-Resistors" urn="urn:adsk.eagle:library:532">
<description>&lt;h3&gt;SparkFun Resistors&lt;/h3&gt;
This library contains resistors. Reference designator:R. 
&lt;br&gt;
&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is &lt;b&gt; the end user's responsibility&lt;/b&gt; to ensure correctness and suitablity for a given componet or application. 
&lt;br&gt;
&lt;br&gt;If you enjoy using this library, please buy one of our products at &lt;a href=" www.sparkfun.com"&gt;SparkFun.com&lt;/a&gt;.
&lt;br&gt;
&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;
&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="0805" urn="urn:adsk.eagle:footprint:39617/1" library_version="1">
<description>&lt;p&gt;&lt;b&gt;Generic 2012 (0805) package&lt;/b&gt;&lt;/p&gt;
&lt;p&gt;0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/p&gt;</description>
<smd name="1" x="-0.9" y="0" dx="0.8" dy="1.2" layer="1"/>
<smd name="2" x="0.9" y="0" dx="0.8" dy="1.2" layer="1"/>
<text x="0" y="0.889" size="0.6096" layer="25" font="vector" ratio="20" align="bottom-center">&gt;NAME</text>
<text x="0" y="-0.889" size="0.6096" layer="27" font="vector" ratio="20" align="top-center">&gt;VALUE</text>
<wire x1="-1.5" y1="0.8" x2="1.5" y2="0.8" width="0.0508" layer="39"/>
<wire x1="1.5" y1="0.8" x2="1.5" y2="-0.8" width="0.0508" layer="39"/>
<wire x1="1.5" y1="-0.8" x2="-1.5" y2="-0.8" width="0.0508" layer="39"/>
<wire x1="-1.5" y1="-0.8" x2="-1.5" y2="0.8" width="0.0508" layer="39"/>
</package>
</packages>
<packages3d>
<package3d name="0805" urn="urn:adsk.eagle:package:39651/1" type="box" library_version="1">
<description>Generic 2012 (0805) package
0.2mm courtyard excess rounded to nearest 0.05mm.</description>
<packageinstances>
<packageinstance name="0805"/>
</packageinstances>
</package3d>
</packages3d>
<symbols>
<symbol name="RESISTOR" urn="urn:adsk.eagle:symbol:39614/1" library_version="1">
<wire x1="-2.54" y1="0" x2="-2.159" y2="1.016" width="0.1524" layer="94"/>
<wire x1="-2.159" y1="1.016" x2="-1.524" y2="-1.016" width="0.1524" layer="94"/>
<wire x1="-1.524" y1="-1.016" x2="-0.889" y2="1.016" width="0.1524" layer="94"/>
<wire x1="-0.889" y1="1.016" x2="-0.254" y2="-1.016" width="0.1524" layer="94"/>
<wire x1="-0.254" y1="-1.016" x2="0.381" y2="1.016" width="0.1524" layer="94"/>
<wire x1="0.381" y1="1.016" x2="1.016" y2="-1.016" width="0.1524" layer="94"/>
<wire x1="1.016" y1="-1.016" x2="1.651" y2="1.016" width="0.1524" layer="94"/>
<wire x1="1.651" y1="1.016" x2="2.286" y2="-1.016" width="0.1524" layer="94"/>
<wire x1="2.286" y1="-1.016" x2="2.54" y2="0" width="0.1524" layer="94"/>
<text x="0" y="1.524" size="1.778" layer="95" font="vector" align="bottom-center">&gt;NAME</text>
<text x="0" y="-1.524" size="1.778" layer="96" font="vector" align="top-center">&gt;VALUE</text>
<pin name="2" x="5.08" y="0" visible="off" length="short" direction="pas" swaplevel="1" rot="R180"/>
<pin name="1" x="-5.08" y="0" visible="off" length="short" direction="pas" swaplevel="1"/>
</symbol>
</symbols>
<devicesets>
<deviceset name="0.75OHM" urn="urn:adsk.eagle:component:39678/1" prefix="R" library_version="1">
<description>&lt;h3&gt;0.75Ω resistor&lt;/h3&gt;
&lt;p&gt;A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. - Wikipedia&lt;/p&gt;</description>
<gates>
<gate name="G$1" symbol="RESISTOR" x="0" y="0"/>
</gates>
<devices>
<device name="-0805-1/4W-1%" package="0805">
<connects>
<connect gate="G$1" pin="1" pad="1"/>
<connect gate="G$1" pin="2" pad="2"/>
</connects>
<package3dinstances>
<package3dinstance package3d_urn="urn:adsk.eagle:package:39651/1"/>
</package3dinstances>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="RES-08474"/>
<attribute name="VALUE" value="0.75"/>
</technology>
</technologies>
</device>
</devices>
</deviceset>
</devicesets>
</library>
<library name="myLib">
<packages>
<package name="TBS2">
<smd name="P$1" x="-0.45" y="0.65" dx="0.9" dy="1.3" layer="1"/>
<smd name="P$2" x="3.75" y="0.65" dx="0.9" dy="1.3" layer="1"/>
<wire x1="5.75" y1="-0.05" x2="-2.45" y2="-0.05" width="0.127" layer="51"/>
<wire x1="5.75" y1="-0.05" x2="5.75" y2="3.5" width="0.127" layer="51"/>
<wire x1="5.75" y1="3.5" x2="-2.45" y2="3.5" width="0.127" layer="51"/>
<wire x1="-2.45" y1="3.5" x2="-2.45" y2="-0.05" width="0.127" layer="51"/>
<hole x="0.5" y="1.7" drill="0.8"/>
<hole x="2.8" y="1.7" drill="0.8"/>
<text x="-2.85" y="1.3" size="0.254" layer="25" rot="R90">TBS2</text>
<text x="2.05" y="3.85" size="0.254" layer="25" rot="R180">&lt;B</text>
<smd name="P$3" x="5" y="2.65" dx="1.45" dy="1" layer="1"/>
<smd name="P$4" x="-1.7" y="2.65" dx="1.45" dy="1" layer="1"/>
<smd name="P$5" x="1.8" y="2.9" dx="7" dy="0.5" layer="1"/>
</package>
<package name="BUZZER">
<smd name="+" x="1" y="1.5" dx="3" dy="2" layer="1" rot="R270"/>
<smd name="-" x="8" y="1.5" dx="3" dy="2" layer="1" rot="R90"/>
<wire x1="7" y1="4" x2="7" y2="4.05" width="0.127" layer="51"/>
<wire x1="7" y1="4.05" x2="-1" y2="4.05" width="0.127" layer="51"/>
<wire x1="7.05" y1="-0.95" x2="6.95" y2="-0.95" width="0.127" layer="51"/>
<text x="0" y="3.05" size="0.8128" layer="51">+</text>
<wire x1="6.95" y1="-0.95" x2="-1" y2="-0.95" width="0.127" layer="51"/>
<wire x1="-1" y1="4.05" x2="-1" y2="-0.95" width="0.127" layer="51"/>
<wire x1="6.95" y1="-0.95" x2="10" y2="-0.95" width="0.127" layer="51"/>
<wire x1="10" y1="-0.95" x2="10" y2="-0.9" width="0.127" layer="51"/>
<wire x1="10" y1="-0.9" x2="10" y2="4.05" width="0.127" layer="51"/>
<wire x1="10" y1="4.05" x2="7.05" y2="4.05" width="0.127" layer="51"/>
</package>
</packages>
<symbols>
<symbol name="TBS2">
<pin name="I" x="0.78" y="4.3" length="point" direction="in"/>
<pin name="O" x="0.78" y="0.3" length="point" direction="in"/>
<wire x1="0.78" y1="4.3" x2="0.78" y2="3.3" width="0.1524" layer="94"/>
<wire x1="0.78" y1="2.3" x2="0.78" y2="0.3" width="0.1524" layer="94"/>
<wire x1="0.78" y1="3.3" x2="1.78" y2="2.3" width="0.1524" layer="94"/>
<wire x1="-1.22" y1="6.3" x2="-1.22" y2="-1.7" width="0.1524" layer="95"/>
<wire x1="-1.22" y1="-1.7" x2="2.78" y2="-1.7" width="0.1524" layer="95"/>
<wire x1="2.78" y1="-1.7" x2="2.78" y2="6.3" width="0.1524" layer="95"/>
<wire x1="2.78" y1="6.3" x2="-1.22" y2="6.3" width="0.1524" layer="95"/>
<text x="-0.22" y="6.3" size="0.8128" layer="95">TBS2</text>
</symbol>
<symbol name="BUZZER">
<circle x="-22.86" y="-2.54" radius="9.1581" width="0.1524" layer="94"/>
<pin name="+" x="-33.02" y="5.08" length="middle"/>
<pin name="-" x="-33.02" y="-10.16" length="middle"/>
<text x="-30.48" y="5.08" size="3.81" layer="94">+</text>
<text x="-27.94" y="-15.24" size="1.778" layer="96">Buzzer</text>
</symbol>
</symbols>
<devicesets>
<deviceset name="TBS2" prefix="S" uservalue="yes">
<gates>
<gate name="G$1" symbol="TBS2" x="17.78" y="-15.24"/>
</gates>
<devices>
<device name="SM_TBS2" package="TBS2">
<connects>
<connect gate="G$1" pin="I" pad="P$1"/>
<connect gate="G$1" pin="O" pad="P$2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
<deviceset name="BUZZER" uservalue="yes">
<gates>
<gate name="G$1" symbol="BUZZER" x="22.86" y="2.54"/>
</gates>
<devices>
<device name="" package="BUZZER">
<connects>
<connect gate="G$1" pin="+" pad="+"/>
<connect gate="G$1" pin="-" pad="-"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
</devicesets>
</library>
<library name="usb-connector">
<description>&lt;h3&gt;SparkFun Connectors&lt;/h3&gt;
This library contains electrically-functional connectors. 
&lt;br&gt;
&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is &lt;b&gt; the end user's responsibility&lt;/b&gt; to ensure correctness and suitablity for a given componet or application. 
&lt;br&gt;
&lt;br&gt;If you enjoy using this library, please buy one of our products at &lt;a href=" www.sparkfun.com"&gt;SparkFun.com&lt;/a&gt;.
&lt;br&gt;
&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;
&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="USB_MICROB_VERTICAL">
<description>&lt;h3&gt;USB Micro-B Plug Connector&lt;/h3&gt;
Manufacturer part #: ZX80-B-5SA&lt;br&gt;
Manufacturer: Hirose&lt;br&gt;
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count: 5 main, 4 shield&lt;/li&gt;
&lt;p&gt;&lt;a href=”https://www.hirose.com/product/en/download_file/key_name/ZX/category/Catalog/doc_file_id/31704/?file_category_id=4&amp;item_id=13&amp;is_series=1”&gt;Datasheet referenced for footprint&lt;/a&gt;&lt;/p&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;USB_Micro-B&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<wire x1="-9.7" y1="3.77" x2="-8.275" y2="3.77" width="0.127" layer="51"/>
<wire x1="-9.7" y1="0.57" x2="-8.275" y2="0.57" width="0.127" layer="51"/>
<wire x1="-9.7" y1="3.77" x2="-10.275" y2="4.3" width="0.127" layer="51"/>
<wire x1="-10.275" y1="4.3" x2="-10.275" y2="5.38" width="0.127" layer="51"/>
<wire x1="-9.7" y1="0.57" x2="-10.275" y2="0" width="0.127" layer="51"/>
<wire x1="-10.275" y1="0" x2="-10.275" y2="-0.9" width="0.127" layer="51"/>
<wire x1="-8.275" y1="3.77" x2="-8.275" y2="0.57" width="0.127" layer="51" curve="-180"/>
<wire x1="9.7" y1="0.57" x2="8.275" y2="0.57" width="0.127" layer="51"/>
<wire x1="8.275" y1="0.57" x2="8.275" y2="3.77" width="0.127" layer="51" curve="-180"/>
<wire x1="9.7" y1="3.77" x2="8.275" y2="3.77" width="0.127" layer="51"/>
<wire x1="9.7" y1="0.57" x2="10.275" y2="0" width="0.127" layer="51"/>
<wire x1="10.275" y1="0" x2="10.275" y2="-0.9" width="0.127" layer="51"/>
<wire x1="9.7" y1="3.77" x2="10.275" y2="4.4" width="0.127" layer="51"/>
<wire x1="10.275" y1="4.4" x2="10.275" y2="5.38" width="0.127" layer="51"/>
<wire x1="-10.275" y1="5.38" x2="-4.275" y2="5.38" width="0.127" layer="51"/>
<wire x1="10.275" y1="5.38" x2="4.275" y2="5.38" width="0.127" layer="51"/>
<wire x1="-10.275" y1="-0.9" x2="-4.275" y2="-0.9" width="0.127" layer="51"/>
<wire x1="10.275" y1="-0.9" x2="4.275" y2="-0.9" width="0.127" layer="51"/>
<wire x1="-4.275" y1="-0.9" x2="-4.275" y2="0" width="0.127" layer="51"/>
<wire x1="4.275" y1="-0.9" x2="4.275" y2="0" width="0.127" layer="51"/>
<wire x1="-4.275" y1="0" x2="4.275" y2="0" width="0.127" layer="51"/>
<wire x1="-4.275" y1="5.38" x2="-4.275" y2="4.48" width="0.127" layer="51"/>
<wire x1="4.275" y1="5.38" x2="4.275" y2="4.48" width="0.127" layer="51"/>
<wire x1="-4.275" y1="4.48" x2="4.275" y2="4.48" width="0.127" layer="51"/>
<pad name="SHLD1" x="-3.12053125" y="3.18301875" drill="1.016" diameter="2.2" rot="R90"/>
<pad name="SHLD3" x="-3.097921875" y="-0.026921875" drill="1.016" diameter="2.2" rot="R90"/>
<pad name="SHLD2" x="3.1218" y="3.160159375" drill="1.016" diameter="2.2" rot="R90"/>
<pad name="SHLD4" x="3.10783125" y="-0.02565625" drill="1.016" diameter="2.2" rot="R90"/>
<smd name="D+" x="0" y="0" dx="2.2" dy="0.4" layer="1" rot="R90"/>
<smd name="D-" x="-0.65" y="0" dx="2.2" dy="0.4" layer="1" rot="R90"/>
<smd name="VBUS" x="-1.3" y="0" dx="2.2" dy="0.4" layer="1" rot="R90"/>
<smd name="GND" x="1.3" y="0" dx="2.2" dy="0.4" layer="1" rot="R90"/>
<smd name="ID" x="0.65" y="0" dx="2.2" dy="0.4" layer="1" rot="R90"/>
<text x="-10.29" y="5.58" size="0.6096" layer="25" font="vector" ratio="20">&gt;Name</text>
<text x="-10.16" y="-1.27" size="0.6096" layer="27" font="vector" ratio="20" align="top-left">&gt;Value</text>
<hole x="-8.275" y="2.17" drill="3.3"/>
<hole x="8.275" y="2.17" drill="3.3"/>
</package>
<package name="USB-B-MICRO-SMD">
<description>&lt;h3&gt;USB - microB SMD&lt;/h3&gt;
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count:5&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;&lt;a href=”https://www.sparkfun.com/datasheets/Prototyping/Micro-USB.pdf”&gt;Datasheet referenced for footprint&lt;/a&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;USB_MICRO-B&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<text x="-4.66" y="5.96" size="0.3048" layer="51">PCB Front</text>
<wire x1="-3" y1="5.6" x2="-2.3" y2="5.3" width="0.08" layer="51"/>
<wire x1="-2.3" y1="5.3" x2="-2.4" y2="5.5" width="0.08" layer="51"/>
<wire x1="-2.3" y1="5.3" x2="-2.5" y2="5.2" width="0.08" layer="51"/>
<text x="-1.27" y="4.699" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="-1.27" y="-4.699" size="0.6096" layer="27" font="vector" ratio="20" align="top-left">&gt;VALUE</text>
<smd name="D+" x="2.725" y="0" dx="0.4" dy="1.45" layer="1" rot="R90"/>
<smd name="D-" x="2.725" y="0.65" dx="0.4" dy="1.45" layer="1" rot="R90"/>
<smd name="VBUS" x="2.725" y="1.3" dx="0.4" dy="1.45" layer="1" rot="R90"/>
<smd name="ID" x="2.725" y="-0.65" dx="0.4" dy="1.45" layer="1" rot="R90"/>
<smd name="GND" x="2.725" y="-1.3" dx="0.4" dy="1.45" layer="1" rot="R90"/>
<hole x="2.2" y="1.9" drill="0.85"/>
<hole x="2.2" y="-1.9" drill="0.85"/>
<rectangle x1="-0.75" y1="2.784" x2="0.75" y2="4.584" layer="31"/>
<rectangle x1="-0.35" y1="-0.75" x2="0.35" y2="0.75" layer="31"/>
<rectangle x1="-0.75" y1="-4.584" x2="0.75" y2="-2.784" layer="31"/>
<wire x1="-2.15" y1="3.9" x2="-2.15" y2="-3.9" width="0.127" layer="49"/>
<wire x1="2.85" y1="3.9" x2="2.85" y2="-3.9" width="0.127" layer="49"/>
<wire x1="2.85" y1="3.9" x2="-2.15" y2="3.9" width="0.127" layer="49"/>
<wire x1="2.85" y1="-3.9" x2="-2.15" y2="-3.9" width="0.127" layer="49"/>
<wire x1="2.981959375" y1="3.99288125" x2="2" y2="3.99288125" width="0.3048" layer="21"/>
<wire x1="2" y1="3.99288125" x2="2" y2="4" width="0.3048" layer="21"/>
<wire x1="3" y1="4" x2="3" y2="3" width="0.3048" layer="21"/>
<wire x1="2" y1="-4" x2="3" y2="-4" width="0.3048" layer="21"/>
<wire x1="3" y1="-4" x2="3" y2="-3" width="0.3048" layer="21"/>
<wire x1="-1" y1="4" x2="-2" y2="4" width="0.3048" layer="21"/>
<wire x1="-1" y1="-4" x2="-2" y2="-4" width="0.3048" layer="21"/>
<rectangle x1="-0.85" y1="2.684" x2="0.85" y2="4.684" layer="29"/>
<rectangle x1="-0.85" y1="-4.684" x2="0.85" y2="-2.684" layer="29"/>
<rectangle x1="-0.85" y1="-1.35" x2="0.85" y2="1.35" layer="29"/>
<smd name="SHIELD1" x="0" y="3.685" dx="1.8" dy="1.5" layer="1" rot="R90" stop="no" cream="no"/>
<smd name="SHIELD3" x="0" y="0" dx="2.5" dy="1.5" layer="1" rot="R90" stop="no" cream="no"/>
<smd name="SHIELD2" x="0" y="-3.685" dx="1.8" dy="1.5" layer="1" rot="R90" stop="no" cream="no"/>
<wire x1="-2" y1="7" x2="-2" y2="0" width="0" layer="51"/>
<dimension x1="-0.85" y1="4.684" x2="0.85" y2="4.684" x3="0" y3="5.65" textsize="0.254" layer="1" width="0"/>
<smd name="P$1" x="0" y="5.05" dx="1.5" dy="1" layer="1" rot="R180"/>
<smd name="P$2" x="0" y="-5.05" dx="1.5" dy="1" layer="1" rot="R180"/>
</package>
<package name="USB-MICROB">
<description>&lt;h3&gt;USB Type microUSB Connector-No Bossed Pins&lt;/h3&gt;
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count:5 pins, 4 shield connections&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;USB_Micro-B&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<wire x1="2.15" y1="-3.4" x2="2.15" y2="-3" width="0.127" layer="51"/>
<wire x1="2.15" y1="3" x2="2.15" y2="3.4" width="0.127" layer="51"/>
<wire x1="2.15" y1="-3.4" x2="1.45" y2="-3.4" width="0.127" layer="51"/>
<wire x1="1.45" y1="-3.4" x2="-2.85" y2="-3.4" width="0.127" layer="51"/>
<wire x1="-2.85" y1="3.4" x2="-2.85" y2="2.2" width="0.127" layer="51"/>
<wire x1="-2.85" y1="3.4" x2="1.45" y2="3.4" width="0.127" layer="51"/>
<wire x1="1.45" y1="3.4" x2="2.15" y2="3.4" width="0.127" layer="51"/>
<wire x1="1.45" y1="-3.4" x2="1.45" y2="3.4" width="0.127" layer="51"/>
<wire x1="-1.25" y1="-3.4" x2="-2.85" y2="-3.4" width="0.2032" layer="21"/>
<wire x1="-2.85" y1="-3.4" x2="-2.85" y2="-2.2" width="0.2032" layer="21"/>
<wire x1="-2.85" y1="3.4" x2="-2.85" y2="2.2" width="0.2032" layer="21"/>
<wire x1="-1.25" y1="3.4" x2="-2.85" y2="3.4" width="0.2032" layer="21"/>
<wire x1="1.45" y1="-3.4" x2="1.45" y2="3.4" width="0.2032" layer="21"/>
<wire x1="-1.45" y1="-2.2" x2="-1.45" y2="2.2" width="0.127" layer="51"/>
<wire x1="-1.45" y1="2.2" x2="-2.85" y2="2.2" width="0.127" layer="51"/>
<wire x1="-1.45" y1="-2.2" x2="-2.85" y2="-2.2" width="0.127" layer="51"/>
<wire x1="-2.85" y1="-3.4" x2="-2.85" y2="-2.2" width="0.127" layer="51"/>
<wire x1="-2.85" y1="-2.2" x2="-1.45" y2="-2.2" width="0.2032" layer="21"/>
<wire x1="-1.45" y1="-2.2" x2="-1.45" y2="2.2" width="0.2032" layer="21"/>
<wire x1="-1.45" y1="2.2" x2="-2.85" y2="2.2" width="0.2032" layer="21"/>
<wire x1="2.15" y1="-3.4" x2="2.75" y2="-4" width="0.2032" layer="51"/>
<wire x1="2.15" y1="3.4" x2="2.75" y2="4" width="0.2032" layer="51"/>
<wire x1="2.15" y1="-3" x2="2.55" y2="-3" width="0.127" layer="51"/>
<wire x1="2.8" y1="-2.8" x2="2.8" y2="2.75" width="0.127" layer="51"/>
<wire x1="2.6" y1="3" x2="2.15" y2="3" width="0.127" layer="51"/>
<wire x1="2.55" y1="-3" x2="2.8" y2="-2.8" width="0.127" layer="51" curve="84.547378"/>
<wire x1="2.8" y1="2.75" x2="2.6" y2="3" width="0.127" layer="51" curve="84.547378"/>
<smd name="VBUS" x="-2.65" y="-1.3" dx="1.4" dy="0.35" layer="1" rot="R180"/>
<smd name="GND" x="-2.65" y="1.3" dx="1.4" dy="0.35" layer="1" rot="R180"/>
<smd name="D-" x="-2.65" y="-0.65" dx="1.4" dy="0.35" layer="1" rot="R180"/>
<smd name="D+" x="-2.65" y="0" dx="1.4" dy="0.35" layer="1" rot="R180"/>
<smd name="ID" x="-2.65" y="0.65" dx="1.4" dy="0.35" layer="1" rot="R180"/>
<smd name="MT1" x="0" y="-4" dx="1.8" dy="1.9" layer="1" rot="R90"/>
<smd name="MT2" x="0" y="4" dx="1.8" dy="1.9" layer="1" rot="R90"/>
<text x="-2.54" y="5.08" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="-1.905" y="-5.08" size="0.6096" layer="27" font="vector" ratio="20" align="top-left">&gt;VALUE</text>
<smd name="P$1" x="0" y="-1.27" dx="1.9" dy="1.9" layer="1" rot="R90"/>
<smd name="P$2" x="0" y="1.27" dx="1.9" dy="1.9" layer="1" rot="R90"/>
</package>
<package name="USB-B-MICRO-SMD_RED_PASTE">
<description>&lt;h3&gt;USB - microB SMD Reduced Paste&lt;/h3&gt;
 70% paste area under D+ D- USBID pins for applications where those pins aren't required, to reduce the likelihood of bridges.
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count:5&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;&lt;a href=”https://www.sparkfun.com/datasheets/Prototyping/Micro-USB.pdf”&gt;Datasheet referenced for footprint&lt;/a&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;USB_MICRO-B&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<text x="-4.66" y="5.96" size="0.3048" layer="51">PCB Front</text>
<wire x1="-3" y1="5.6" x2="-2.3" y2="5.3" width="0.08" layer="51"/>
<wire x1="-2.3" y1="5.3" x2="-2.4" y2="5.5" width="0.08" layer="51"/>
<wire x1="-2.3" y1="5.3" x2="-2.5" y2="5.2" width="0.08" layer="51"/>
<text x="-1.27" y="4.8006" size="0.6096" layer="25" font="vector" ratio="20">&gt;NAME</text>
<text x="-1.27" y="-4.8006" size="0.6096" layer="27" font="vector" ratio="20" align="top-left">&gt;VALUE</text>
<smd name="D+" x="2.725" y="0" dx="0.4" dy="1.45" layer="1" rot="R90" cream="no"/>
<smd name="D-" x="2.725" y="0.65" dx="0.4" dy="1.45" layer="1" rot="R90" cream="no"/>
<smd name="VBUS" x="2.725" y="1.3" dx="0.4" dy="1.45" layer="1" rot="R90"/>
<smd name="ID" x="2.725" y="-0.65" dx="0.4" dy="1.45" layer="1" rot="R90" cream="no"/>
<smd name="GND" x="2.725" y="-1.3" dx="0.4" dy="1.45" layer="1" rot="R90"/>
<hole x="2.2" y="1.9" drill="0.85"/>
<hole x="2.2" y="-1.9" drill="0.85"/>
<rectangle x1="-0.75" y1="2.784" x2="0.75" y2="4.584" layer="31"/>
<rectangle x1="-0.35" y1="-0.75" x2="0.35" y2="0.75" layer="31"/>
<rectangle x1="-0.75" y1="-4.584" x2="0.75" y2="-2.784" layer="31"/>
<wire x1="-2.15" y1="3.9" x2="-2.15" y2="-3.9" width="0.127" layer="49"/>
<wire x1="2.85" y1="3.9" x2="2.85" y2="-3.9" width="0.127" layer="49"/>
<wire x1="2.85" y1="3.9" x2="-2.15" y2="3.9" width="0.127" layer="49"/>
<wire x1="2.85" y1="-3.9" x2="-2.15" y2="-3.9" width="0.127" layer="49"/>
<wire x1="2.981959375" y1="3.99288125" x2="2" y2="3.99288125" width="0.3048" layer="21"/>
<wire x1="2" y1="3.99288125" x2="2" y2="4" width="0.3048" layer="21"/>
<wire x1="3" y1="4" x2="3" y2="3" width="0.3048" layer="21"/>
<wire x1="2" y1="-4" x2="3" y2="-4" width="0.3048" layer="21"/>
<wire x1="3" y1="-4" x2="3" y2="-3" width="0.3048" layer="21"/>
<wire x1="-1" y1="4" x2="-2" y2="4" width="0.3048" layer="21"/>
<wire x1="-1" y1="-4" x2="-2" y2="-4" width="0.3048" layer="21"/>
<rectangle x1="-0.85" y1="2.684" x2="0.85" y2="4.684" layer="29"/>
<rectangle x1="-0.85" y1="-4.684" x2="0.85" y2="-2.684" layer="29"/>
<rectangle x1="-0.85" y1="-1.35" x2="0.85" y2="1.35" layer="29"/>
<smd name="SHIELD1" x="0" y="3.685" dx="1.8" dy="1.5" layer="1" rot="R90" stop="no" cream="no"/>
<smd name="SHIELD3" x="0" y="0" dx="2.5" dy="1.5" layer="1" rot="R90" stop="no" cream="no"/>
<smd name="SHIELD2" x="0" y="-3.685" dx="1.8" dy="1.5" layer="1" rot="R90" stop="no" cream="no"/>
<wire x1="-2" y1="7" x2="-2" y2="0" width="0" layer="51"/>
<rectangle x1="2.1" y1="0.5" x2="3.35" y2="0.8" layer="31"/>
<rectangle x1="2.1" y1="-0.15" x2="3.35" y2="0.15" layer="31"/>
<rectangle x1="2.1" y1="-0.8" x2="3.35" y2="-0.5" layer="31"/>
</package>
<package name="USB-B-MICRO-SMD_VERT">
<wire x1="3.77653125" y1="-1.065228125" x2="3.172496875" y2="-1.714565625" width="0.2032" layer="21"/>
<wire x1="3.172496875" y1="-1.714565625" x2="2.746740625" y2="-1.9" width="0.2032" layer="21" curve="-47.069973"/>
<wire x1="2.746740625" y1="-1.9" x2="-2.746740625" y2="-1.9" width="0.2032" layer="21"/>
<wire x1="-2.746740625" y1="-1.9" x2="-3.172496875" y2="-1.714565625" width="0.2032" layer="21" curve="-47.070198"/>
<wire x1="-3.172496875" y1="-1.714565625" x2="-3.77653125" y2="-1.065228125" width="0.2032" layer="21"/>
<wire x1="-3.77653125" y1="-1.065228125" x2="-4" y2="-0.496903125" width="0.2032" layer="21" curve="-42.930144"/>
<wire x1="-4" y1="-0.496903125" x2="-4" y2="-0.493303125" width="0.127" layer="21"/>
<wire x1="-4" y1="-0.493303125" x2="-3.256696875" y2="0.25" width="0.2032" layer="21" curve="-90"/>
<wire x1="-3.256696875" y1="0.25" x2="3.256696875" y2="0.25" width="0.2032" layer="21"/>
<wire x1="3.256696875" y1="0.25" x2="4" y2="-0.493303125" width="0.2032" layer="21" curve="-90"/>
<wire x1="4" y1="-0.493303125" x2="4" y2="-0.496903125" width="0.127" layer="21"/>
<wire x1="4" y1="-0.496903125" x2="3.77653125" y2="-1.065228125" width="0.2032" layer="21" curve="-42.930086"/>
<rectangle x1="-1.43" y1="-0.65" x2="-1.17" y2="0.65" layer="31"/>
<rectangle x1="-0.78" y1="-0.65" x2="-0.52" y2="0.65" layer="31"/>
<rectangle x1="-0.13" y1="-0.65" x2="0.13" y2="0.65" layer="31"/>
<rectangle x1="0.52" y1="-0.65" x2="0.78" y2="0.65" layer="31"/>
<rectangle x1="1.17" y1="-0.65" x2="1.43" y2="0.65" layer="31"/>
<smd name="D+" x="0" y="0" dx="1.5" dy="0.45" layer="1" rot="R270" cream="no"/>
<smd name="D-" x="-0.65" y="0" dx="1.5" dy="0.45" layer="1" rot="R270" cream="no"/>
<smd name="GND" x="1.3" y="0" dx="1.5" dy="0.45" layer="1" rot="R270" cream="no"/>
<smd name="ID" x="0.65" y="0" dx="1.5" dy="0.45" layer="1" rot="R270" cream="no"/>
<pad name="P1" x="-2.8" y="0.25" drill="1.016" rot="R180"/>
<pad name="P2" x="2.8" y="0.25" drill="1.016" rot="R180"/>
<pad name="P3" x="0" y="-1.9" drill="1.27"/>
<smd name="VBUS" x="-1.3" y="0" dx="1.5" dy="0.45" layer="1" rot="R270" cream="no"/>
<text x="-1" y="-3" size="0.4064" layer="25" align="bottom-right">&gt;NAME</text>
<text x="1" y="-3" size="0.4064" layer="27">&gt;VALUE</text>
</package>
<package name="USB-MICROB-PTH-MILL">
<smd name="SHIELD7" x="2.72858125" y="-2.53091875" dx="2.1" dy="1.4" layer="16" roundness="100" rot="R90" stop="no" cream="no"/>
<smd name="D+" x="0" y="0" dx="1.75" dy="0.4" layer="1" rot="R90" cream="no"/>
<smd name="D-" x="-0.65" y="0" dx="1.75" dy="0.4" layer="1" rot="R90" cream="no"/>
<smd name="GND" x="1.3" y="0" dx="1.75" dy="0.4" layer="1" rot="R90" cream="no"/>
<smd name="ID" x="0.65" y="0" dx="1.75" dy="0.4" layer="1" rot="R90" cream="no"/>
<smd name="SHIELD2" x="2.9" y="0.275" dx="1.46" dy="2" layer="1" rot="R90"/>
<smd name="SHIELD" x="-2.9" y="0.275" dx="1.46" dy="2" layer="1" rot="R90"/>
<smd name="SHIELD3" x="-0.9625" y="-2.675" dx="2.5" dy="1.425" layer="1" rot="R90"/>
<smd name="SHIELD4" x="0.9625" y="-2.675" dx="2.5" dy="1.425" layer="1" rot="R90"/>
<smd name="SHIELD5" x="-2.73141875" y="-2.53091875" dx="2.1" dy="1.4" layer="16" roundness="100" rot="R90" stop="no" cream="no"/>
<smd name="SHIELD6" x="2.7" y="-2.575" dx="1" dy="1" layer="1" roundness="100" rot="R90" stop="no" cream="no"/>
<smd name="SHIELD8" x="-2.73141875" y="-2.73091875" dx="1.5" dy="1.1" layer="1" roundness="100" rot="R90" stop="no" cream="no"/>
<smd name="SHIELD9" x="-2.43" y="0.195" dx="1.3" dy="1" layer="16" roundness="100" rot="R90" stop="no" cream="no"/>
<smd name="SHIELD10" x="2.43" y="0.195" dx="1.3" dy="1" layer="16" roundness="100" rot="R90" stop="no" cream="no"/>
<smd name="VBUS" x="-1.3" y="0" dx="1.75" dy="0.4" layer="1" rot="R90" cream="no"/>
<text x="-1.016" y="2.667" size="0.508" layer="25" font="vector">&gt;NAME</text>
<text x="-1.524" y="-3.556" size="0.508" layer="27" font="vector">&gt;VALUE</text>
<polygon width="0.2032" layer="1">
<vertex x="-3.725" y="-0.685"/>
<vertex x="-3.73" y="-1.325"/>
<vertex x="-3.355" y="-1.325"/>
<vertex x="-3.35" y="-3.215" curve="90"/>
<vertex x="-2.945" y="-3.51"/>
<vertex x="-2.345" y="-3.51" curve="90"/>
<vertex x="-2.1" y="-3.225"/>
<vertex x="-2.095" y="-0.685"/>
</polygon>
<polygon width="0.2032" layer="1">
<vertex x="3.718" y="-0.685"/>
<vertex x="3.718" y="-1.32"/>
<vertex x="3.34" y="-1.32"/>
<vertex x="3.34" y="-3.405" curve="-90"/>
<vertex x="3.2" y="-3.525"/>
<vertex x="2.335" y="-3.5" curve="-90"/>
<vertex x="2.137" y="-3.295"/>
<vertex x="2.137" y="-0.685"/>
</polygon>
<polygon width="0.1016" layer="29">
<vertex x="-3.8" y="-0.625"/>
<vertex x="-2" y="-0.625"/>
<vertex x="-2" y="-3.225" curve="-90"/>
<vertex x="-2.3" y="-3.625"/>
<vertex x="-3" y="-3.625" curve="-90"/>
<vertex x="-3.4" y="-3.225"/>
<vertex x="-3.4" y="-1.425"/>
<vertex x="-3.8" y="-1.425"/>
</polygon>
<polygon width="0.1016" layer="29">
<vertex x="2" y="-0.625"/>
<vertex x="3.8" y="-0.625"/>
<vertex x="3.8" y="-1.425"/>
<vertex x="3.5" y="-1.425"/>
<vertex x="3.5" y="-3.325" curve="-90"/>
<vertex x="3.1" y="-3.625"/>
<vertex x="2.3" y="-3.625" curve="-90"/>
<vertex x="2" y="-3.325"/>
</polygon>
<polygon width="0.1016" layer="31">
<vertex x="3.3798" y="-1.4376"/>
<vertex x="3.8624" y="-1.4376"/>
<vertex x="3.8624" y="-0.6502"/>
<vertex x="1.9828" y="-0.6502"/>
<vertex x="1.9828" y="-3.1902" curve="90"/>
<vertex x="2.313" y="-3.5204"/>
<vertex x="3.0496" y="-3.5204" curve="90"/>
<vertex x="3.3544" y="-3.2156"/>
<vertex x="3.3544" y="-1.463" curve="-90"/>
</polygon>
<polygon width="0.05" layer="31">
<vertex x="-1.425" y="0.81908125"/>
<vertex x="-1.175" y="0.81908125"/>
<vertex x="-1.175" y="-0.80591875"/>
<vertex x="-1.425" y="-0.80591875"/>
</polygon>
<polygon width="0.05" layer="31">
<vertex x="-0.775" y="0.81908125"/>
<vertex x="-0.525" y="0.81908125"/>
<vertex x="-0.525" y="-0.80591875"/>
<vertex x="-0.775" y="-0.80591875"/>
</polygon>
<polygon width="0.05" layer="31">
<vertex x="-0.125" y="0.81908125"/>
<vertex x="0.125" y="0.81908125"/>
<vertex x="0.125" y="-0.80591875"/>
<vertex x="-0.125" y="-0.80591875"/>
</polygon>
<polygon width="0.05" layer="31">
<vertex x="0.525" y="0.81908125"/>
<vertex x="0.775" y="0.81908125"/>
<vertex x="0.775" y="-0.80591875"/>
<vertex x="0.525" y="-0.80591875"/>
</polygon>
<polygon width="0.05" layer="31">
<vertex x="1.175" y="0.81908125"/>
<vertex x="1.425" y="0.81908125"/>
<vertex x="1.425" y="-0.80591875"/>
<vertex x="1.175" y="-0.80591875"/>
</polygon>
<wire x1="2.38" y1="-2.525" x2="2.73" y2="-2.225" width="0.02" layer="46" curve="-85"/>
<wire x1="2.73" y1="-2.225" x2="3.08" y2="-2.525" width="0.02" layer="46" curve="-85"/>
<wire x1="3.08" y1="-2.525" x2="3.08" y2="-3.125" width="0.02" layer="46"/>
<wire x1="3.08" y1="-3.125" x2="2.73" y2="-3.425" width="0.02" layer="46" curve="-85"/>
<wire x1="2.73" y1="-3.425" x2="2.38" y2="-3.125" width="0.02" layer="46" curve="-85"/>
<wire x1="2.38" y1="-3.125" x2="2.38" y2="-2.525" width="0.02" layer="46"/>
<polygon width="0.1016" layer="31">
<vertex x="-3.3926375" y="-1.4376"/>
<vertex x="-3.8752375" y="-1.4376"/>
<vertex x="-3.8752375" y="-0.6502"/>
<vertex x="-1.9956375" y="-0.6502"/>
<vertex x="-1.9956375" y="-3.1902" curve="-90"/>
<vertex x="-2.3258375" y="-3.5204"/>
<vertex x="-3.0624375" y="-3.5204" curve="-90"/>
<vertex x="-3.3672375" y="-3.2156"/>
<vertex x="-3.3672375" y="-1.463" curve="90"/>
</polygon>
<wire x1="2.105" y1="0.405" x2="2.43" y2="0.73" width="0.02" layer="46" curve="-91.818761"/>
<wire x1="2.43" y1="0.73" x2="2.755" y2="0.405" width="0.02" layer="46" curve="-90"/>
<wire x1="2.755" y1="0.405" x2="2.755" y2="0.005" width="0.02" layer="46"/>
<wire x1="2.755" y1="0.005" x2="2.44" y2="-0.32" width="0.02" layer="46" curve="-98.038753"/>
<wire x1="2.44" y1="-0.32" x2="2.105" y2="0.005" width="0.02" layer="46" curve="-86.772089"/>
<wire x1="2.105" y1="0.005" x2="2.105" y2="0.405" width="0.02" layer="46"/>
<wire x1="-2.755" y1="0.405" x2="-2.43" y2="0.73" width="0.02" layer="46" curve="-91.818761"/>
<wire x1="-2.43" y1="0.73" x2="-2.105" y2="0.405" width="0.02" layer="46" curve="-90"/>
<wire x1="-2.105" y1="0.405" x2="-2.105" y2="0.005" width="0.02" layer="46"/>
<wire x1="-2.105" y1="0.005" x2="-2.42" y2="-0.32" width="0.02" layer="46" curve="-98.038753"/>
<wire x1="-2.42" y1="-0.32" x2="-2.755" y2="0.005" width="0.02" layer="46" curve="-86.772089"/>
<wire x1="-2.755" y1="0.005" x2="-2.755" y2="0.405" width="0.02" layer="46"/>
<wire x1="-3.08" y1="-2.525" x2="-2.73" y2="-2.225" width="0.02" layer="46" curve="-85"/>
<wire x1="-2.73" y1="-2.225" x2="-2.38" y2="-2.525" width="0.02" layer="46" curve="-85"/>
<wire x1="-2.38" y1="-2.525" x2="-2.38" y2="-3.125" width="0.02" layer="46"/>
<wire x1="-2.38" y1="-3.125" x2="-2.73" y2="-3.425" width="0.02" layer="46" curve="-85"/>
<wire x1="-2.73" y1="-3.425" x2="-3.08" y2="-3.125" width="0.02" layer="46" curve="-85"/>
<wire x1="-3.08" y1="-3.125" x2="-3.08" y2="-2.525" width="0.02" layer="46"/>
<wire x1="-3.75" y1="-5.025" x2="3.75" y2="-5.025" width="0.1524" layer="51"/>
<wire x1="3.75" y1="-5.025" x2="3.75" y2="-0.025" width="0.1524" layer="51"/>
<wire x1="3.75" y1="-0.025" x2="-3.75" y2="-0.025" width="0.1524" layer="51"/>
<wire x1="-3.75" y1="-0.025" x2="-3.75" y2="-5.025" width="0.1524" layer="51"/>
<wire x1="4.02" y1="-5.645" x2="-4.02" y2="-5.645" width="0.1524" layer="51"/>
<wire x1="-4.02" y1="-5.645" x2="-3.75" y2="-5.025" width="0.1524" layer="51"/>
<wire x1="4.02" y1="-5.645" x2="3.75" y2="-5.025" width="0.1524" layer="51"/>
</package>
</packages>
<symbols>
<symbol name="USB-5PIN">
<description>&lt;h3&gt;USB - 5 pin&lt;/h3&gt;
&lt;p&gt;5 pin USB connector: VBUS, GND, D+, D-, ID &lt;/p&gt;
&lt;p&gt;Includes 4 pins for shield connections &lt;/p&gt;</description>
<wire x1="-2.54" y1="-7.62" x2="2.54" y2="-7.62" width="0.254" layer="94"/>
<wire x1="2.54" y1="-7.62" x2="2.54" y2="10.16" width="0.254" layer="94"/>
<wire x1="2.54" y1="10.16" x2="-2.54" y2="10.16" width="0.254" layer="94"/>
<text x="0" y="1.524" size="2.54" layer="94" rot="R270" align="center">USB</text>
<pin name="D+" x="5.08" y="2.54" visible="pad" length="short" rot="R180"/>
<pin name="D-" x="5.08" y="5.08" visible="pad" length="short" rot="R180"/>
<pin name="VBUS" x="5.08" y="7.62" visible="pad" length="short" direction="pwr" rot="R180"/>
<pin name="GND" x="5.08" y="-2.54" visible="pad" length="short" direction="pwr" rot="R180"/>
<pin name="ID" x="5.08" y="0" visible="pad" length="short" rot="R180"/>
<pin name="SHIELD" x="5.08" y="-5.08" visible="pad" length="short" rot="R180"/>
<text x="-2.54" y="-9.906" size="1.778" layer="96" font="vector" rot="MR180" align="top-left">&gt;VALUE</text>
<wire x1="-2.54" y1="-7.62" x2="-2.54" y2="10.16" width="0.254" layer="94"/>
<text x="-2.54" y="10.414" size="1.778" layer="95" font="vector">&gt;NAME</text>
</symbol>
</symbols>
<devicesets>
<deviceset name="USB_MICRO-B" prefix="J" uservalue="yes">
<description>&lt;h3&gt;USB Type Micro-B Connector&lt;/h3&gt;
&lt;p&gt;Male/female and PTH/SMT variants&lt;/p&gt;
&lt;p&gt;SparkFun Products:
&lt;ul&gt;&lt;li&gt;&lt;a href=”https://www.sparkfun.com/products/12035”&gt;SparkFun microB USB Breakout&lt;/a&gt;&lt;/li&gt;
&lt;li&gt;&lt;a href=”https://www.sparkfun.com/products/10031”&gt;SparkFun USB microB Plug Breakout&lt;/a&gt;&lt;/li&gt;
&lt;li&gt;&lt;a href=”https://www.sparkfun.com/products/13231”&gt;SparkFun ESP8266 Thing&lt;/a&gt;&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<gates>
<gate name="J1" symbol="USB-5PIN" x="0" y="0"/>
</gates>
<devices>
<device name="_MALE-VERT" package="USB_MICROB_VERTICAL">
<connects>
<connect gate="J1" pin="D+" pad="D+"/>
<connect gate="J1" pin="D-" pad="D-"/>
<connect gate="J1" pin="GND" pad="GND"/>
<connect gate="J1" pin="ID" pad="ID"/>
<connect gate="J1" pin="SHIELD" pad="SHLD1 SHLD2 SHLD3 SHLD4"/>
<connect gate="J1" pin="VBUS" pad="VBUS"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-09900"/>
</technology>
</technologies>
</device>
<device name="_FEMALE-SMT" package="USB-B-MICRO-SMD">
<connects>
<connect gate="J1" pin="D+" pad="D+"/>
<connect gate="J1" pin="D-" pad="D-"/>
<connect gate="J1" pin="GND" pad="GND"/>
<connect gate="J1" pin="ID" pad="ID"/>
<connect gate="J1" pin="SHIELD" pad="SHIELD1 SHIELD2 SHIELD3"/>
<connect gate="J1" pin="VBUS" pad="VBUS"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-11752" constant="no"/>
</technology>
</technologies>
</device>
<device name="_SMT" package="USB-MICROB">
<connects>
<connect gate="J1" pin="D+" pad="D+"/>
<connect gate="J1" pin="D-" pad="D-"/>
<connect gate="J1" pin="GND" pad="GND"/>
<connect gate="J1" pin="ID" pad="ID"/>
<connect gate="J1" pin="SHIELD" pad="MT1 MT2 P$1 P$2"/>
<connect gate="J1" pin="VBUS" pad="VBUS"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-09505" constant="no"/>
<attribute name="SF_ID" value="PRT-08533" constant="no"/>
</technology>
</technologies>
</device>
<device name="REDUCED_PASTE" package="USB-B-MICRO-SMD_RED_PASTE">
<connects>
<connect gate="J1" pin="D+" pad="D+"/>
<connect gate="J1" pin="D-" pad="D-"/>
<connect gate="J1" pin="GND" pad="GND"/>
<connect gate="J1" pin="ID" pad="ID"/>
<connect gate="J1" pin="SHIELD" pad="SHIELD1 SHIELD2 SHIELD3"/>
<connect gate="J1" pin="VBUS" pad="VBUS"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-11752"/>
</technology>
</technologies>
</device>
<device name="_FEMALE-SMT-VERT" package="USB-B-MICRO-SMD_VERT">
<connects>
<connect gate="J1" pin="D+" pad="D+"/>
<connect gate="J1" pin="D-" pad="D-"/>
<connect gate="J1" pin="GND" pad="GND"/>
<connect gate="J1" pin="ID" pad="ID"/>
<connect gate="J1" pin="SHIELD" pad="P1 P2 P3"/>
<connect gate="J1" pin="VBUS" pad="VBUS"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-13534" constant="no"/>
<attribute name="VALUE" value="WM9734TR-ND " constant="no"/>
</technology>
</technologies>
</device>
<device name="_HALF_PTH_MILL" package="USB-MICROB-PTH-MILL">
<connects>
<connect gate="J1" pin="D+" pad="D+"/>
<connect gate="J1" pin="D-" pad="D-"/>
<connect gate="J1" pin="GND" pad="GND"/>
<connect gate="J1" pin="ID" pad="ID"/>
<connect gate="J1" pin="SHIELD" pad="SHIELD SHIELD2 SHIELD3 SHIELD4 SHIELD5 SHIELD6 SHIELD7 SHIELD8 SHIELD9 SHIELD10"/>
<connect gate="J1" pin="VBUS" pad="VBUS"/>
</connects>
<technologies>
<technology name="">
<attribute name="PROD_ID" value="CONN-13711" constant="no"/>
</technology>
</technologies>
</device>
</devices>
</deviceset>
</devicesets>
</library>
</libraries>
<attributes>
</attributes>
<variantdefs>
</variantdefs>
<classes>
<class number="0" name="default" width="0" drill="0">
</class>
</classes>
<parts>
<part name="U$1" library="diy-modules" deviceset="DISPLAY-OLED-128X32" device=""/>
<part name="U1" library="esp8266modules" deviceset="ESP12" device="SMD" value="ESP12"/>
<part name="R1" library="resistor" library_urn="urn:adsk.eagle:library:348" deviceset="R-US_" device="M0805" package3d_urn="urn:adsk.eagle:package:26079/1" value="10k"/>
<part name="R2" library="resistor" library_urn="urn:adsk.eagle:library:348" deviceset="R-US_" device="M0805" package3d_urn="urn:adsk.eagle:package:26079/1" value="10k"/>
<part name="R3" library="resistor" library_urn="urn:adsk.eagle:library:348" deviceset="R-US_" device="M0805" package3d_urn="urn:adsk.eagle:package:26079/1" value="10K"/>
<part name="R4" library="resistor" library_urn="urn:adsk.eagle:library:348" deviceset="R-US_" device="M0805" package3d_urn="urn:adsk.eagle:package:26079/1" value="10k"/>
<part name="C1" library="SparkFun-Capacitors" library_urn="urn:adsk.eagle:library:510" deviceset="22UF" device="-0805-6.3V-20%" package3d_urn="urn:adsk.eagle:package:37429/1" value="100nf"/>
<part name="GND1" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/>
<part name="P+1" library="audio amplifier example" library_urn="urn:adsk.eagle:library:970892" deviceset="VCC" device=""/>
<part name="TP1" library="SparkFun-Connectors" library_urn="urn:adsk.eagle:library:513" deviceset="TEST-POINT" device="3X5" package3d_urn="urn:adsk.eagle:package:38285/1"/>
<part name="TP2" library="SparkFun-Connectors" library_urn="urn:adsk.eagle:library:513" deviceset="TEST-POINT" device="3X5" package3d_urn="urn:adsk.eagle:package:38285/1"/>
<part name="TP3" library="SparkFun-Connectors" library_urn="urn:adsk.eagle:library:513" deviceset="TEST-POINT" device="3X5" package3d_urn="urn:adsk.eagle:package:38285/1"/>
<part name="TP4" library="SparkFun-Connectors" library_urn="urn:adsk.eagle:library:513" deviceset="TEST-POINT" device="3X5" package3d_urn="urn:adsk.eagle:package:38285/1"/>
<part name="TP5" library="SparkFun-Connectors" library_urn="urn:adsk.eagle:library:513" deviceset="TEST-POINT" device="3X5" package3d_urn="urn:adsk.eagle:package:38285/1"/>
<part name="TP6" library="SparkFun-Connectors" library_urn="urn:adsk.eagle:library:513" deviceset="TEST-POINT" device="3X5" package3d_urn="urn:adsk.eagle:package:38285/1"/>
<part name="GND3" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/>
<part name="P+2" library="audio amplifier example" library_urn="urn:adsk.eagle:library:970892" deviceset="VCC" device=""/>
<part name="IC1" library="DS3231" deviceset="DS3231" device="/SO"/>
<part name="BT1" library="SparkFun-Batteries" deviceset="BATTERY" device="-20MM_PTH"/>
<part name="C2" library="SparkFun-Capacitors" library_urn="urn:adsk.eagle:library:510" deviceset="22UF" device="-0805-6.3V-20%" package3d_urn="urn:adsk.eagle:package:37429/1" value="0.1uf"/>
<part name="R5" library="resistor" library_urn="urn:adsk.eagle:library:348" deviceset="R-US_" device="M0805" package3d_urn="urn:adsk.eagle:package:26079/1" value="10K"/>
<part name="R6" library="resistor" library_urn="urn:adsk.eagle:library:348" deviceset="R-US_" device="M0805" package3d_urn="urn:adsk.eagle:package:26079/1" value="10K"/>
<part name="P+4" library="audio amplifier example" library_urn="urn:adsk.eagle:library:970892" deviceset="VCC" device=""/>
<part name="GND4" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/>
<part name="GND5" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/>
<part name="M1" library="mfrc522-module" deviceset="RFID-RC522" device=""/>
<part name="GND6" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/>
<part name="P+5" library="audio amplifier example" library_urn="urn:adsk.eagle:library:970892" deviceset="VCC" device=""/>
<part name="U2" library="AMS1117-3.3" deviceset="AMS1117-3.3" device=""/>
<part name="F1" library="SparkFun-Fuses" library_urn="urn:adsk.eagle:library:517" deviceset="PPTC" device="_HALF-AMP" package3d_urn="urn:adsk.eagle:package:38575/1" value="6V/0.5A"/>
<part name="C6" library="SparkFun-Capacitors" library_urn="urn:adsk.eagle:library:510" deviceset="4.7UF" device="-1206-16V-(+80/-20%)" package3d_urn="urn:adsk.eagle:package:37426/1" value="10UF-TENTALIUM"/>
<part name="C3" library="SparkFun-Capacitors" library_urn="urn:adsk.eagle:library:510" deviceset="22UF" device="-0805-6.3V-20%" package3d_urn="urn:adsk.eagle:package:37429/1" value="100nf"/>
<part name="C4" library="SparkFun-Capacitors" library_urn="urn:adsk.eagle:library:510" deviceset="22UF" device="-0805-6.3V-20%" package3d_urn="urn:adsk.eagle:package:37429/1" value="100nf"/>
<part name="C5" library="SparkFun-Capacitors" library_urn="urn:adsk.eagle:library:510" deviceset="22UF" device="-0805-6.3V-20%" package3d_urn="urn:adsk.eagle:package:37429/1" value="100nf"/>
<part name="GND7" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/>
<part name="R7" library="resistor" library_urn="urn:adsk.eagle:library:348" deviceset="R-US_" device="M0805" package3d_urn="urn:adsk.eagle:package:26079/1" value="10k"/>
<part name="R8" library="resistor" library_urn="urn:adsk.eagle:library:348" deviceset="R-US_" device="M0805" package3d_urn="urn:adsk.eagle:package:26079/1" value="10k"/>
<part name="T1" library="BC847" deviceset="BC847" device=""/>
<part name="GND8" library="supply1" library_urn="urn:adsk.eagle:library:371" deviceset="GND" device=""/>
<part name="J2" library="SparkFun-Connectors" library_urn="urn:adsk.eagle:library:513" deviceset="CONN_03" device="" package3d_urn="urn:adsk.eagle:package:38063/1"/>
<part name="R10" library="SparkFun-Resistors" library_urn="urn:adsk.eagle:library:532" deviceset="0.75OHM" device="-0805-1/4W-1%" package3d_urn="urn:adsk.eagle:package:39651/1" value="10k"/>
<part name="R9" library="resistor" library_urn="urn:adsk.eagle:library:348" deviceset="R-US_" device="M0805" package3d_urn="urn:adsk.eagle:package:26079/1" value="10k"/>
<part name="S1" library="myLib" deviceset="TBS2" device="SM_TBS2"/>
<part name="R11" library="resistor" library_urn="urn:adsk.eagle:library:348" deviceset="R-US_" device="M1206" package3d_urn="urn:adsk.eagle:package:26088/1"/>
<part name="U$2" library="myLib" deviceset="BUZZER" device=""/>
<part name="J3" library="usb-connector" deviceset="USB_MICRO-B" device="_FEMALE-SMT"/>
</parts>
<sheets>
<sheet>
<plain>
<wire x1="63.5" y1="-71.12" x2="63.5" y2="-60.96" width="0.1524" layer="96"/>
<wire x1="63.5" y1="-60.96" x2="63.5" y2="-55.88" width="0.1524" layer="96"/>
<wire x1="63.5" y1="-55.88" x2="63.5" y2="-50.8" width="0.1524" layer="96"/>
<wire x1="63.5" y1="-50.8" x2="63.5" y2="-43.18" width="0.1524" layer="96"/>
<wire x1="63.5" y1="-43.18" x2="144.78" y2="-43.18" width="0.1524" layer="96"/>
<wire x1="144.78" y1="-43.18" x2="63.5" y2="-43.18" width="0.1524" layer="96"/>
<wire x1="63.5" y1="-43.18" x2="63.5" y2="-50.8" width="0.1524" layer="96"/>
<wire x1="63.5" y1="-50.8" x2="144.78" y2="-50.8" width="0.1524" layer="96"/>
<wire x1="144.78" y1="-50.8" x2="63.5" y2="-50.8" width="0.1524" layer="96"/>
<wire x1="63.5" y1="-50.8" x2="63.5" y2="-55.88" width="0.1524" layer="96"/>
<wire x1="63.5" y1="-55.88" x2="144.78" y2="-55.88" width="0.1524" layer="96"/>
<wire x1="144.78" y1="-55.88" x2="144.78" y2="-60.96" width="0.1524" layer="96"/>
<wire x1="144.78" y1="-60.96" x2="124.46" y2="-60.96" width="0.1524" layer="96"/>
<wire x1="124.46" y1="-60.96" x2="121.92" y2="-60.96" width="0.1524" layer="96"/>
<wire x1="121.92" y1="-60.96" x2="63.5" y2="-60.96" width="0.1524" layer="96"/>
<wire x1="63.5" y1="-60.96" x2="63.5" y2="-66.04" width="0.1524" layer="96"/>
<wire x1="63.5" y1="-66.04" x2="144.78" y2="-66.04" width="0.1524" layer="96"/>
<wire x1="124.46" y1="-60.96" x2="121.92" y2="-60.96" width="0.1524" layer="96"/>
<wire x1="121.92" y1="-71.12" x2="144.78" y2="-71.12" width="0.1524" layer="96"/>
<wire x1="144.78" y1="-71.12" x2="63.5" y2="-71.12" width="0.1524" layer="96"/>
<text x="66.04" y="-50.8" size="2.54" layer="94">Author: Saurabh Pandey</text>
<text x="66.04" y="-55.88" size="2.54" layer="94">Title: Attendance System</text>
<text x="66.04" y="-60.96" size="2.54" layer="94">Module: v1.2</text>
<text x="66.04" y="-66.04" size="2.54" layer="94">Date: 14/08/2018</text>
<text x="119.38" y="73.66" size="2.54" layer="96">Size: 0.1 inch
Alt: 0.01 inch </text>
<wire x1="114.3" y1="81.28" x2="114.3" y2="73.66" width="0.1524" layer="96"/>
<wire x1="114.3" y1="73.66" x2="144.78" y2="73.66" width="0.1524" layer="96"/>
<text x="129.54" y="-66.04" size="2.54" layer="94">R2.0</text>
<text x="50.8" y="-20.32" size="1.778" layer="95">Buzzer</text>
<text x="38.1" y="-25.4" size="1.778" layer="95" rot="R90">Diode-1205</text>
</plain>
<instances>
<instance part="U$1" gate="G$1" x="-81.28" y="-20.32" rot="R90"/>
<instance part="U1" gate="G$1" x="58.42" y="40.64"/>
<instance part="R1" gate="G$1" x="30.48" y="60.96" rot="R90"/>
<instance part="R2" gate="G$1" x="38.1" y="60.96" rot="R90"/>
<instance part="R3" gate="G$1" x="81.28" y="60.96" rot="R90"/>
<instance part="R4" gate="G$1" x="81.28" y="25.4" rot="R90"/>
<instance part="C1" gate="G$1" x="27.94" y="25.4" rot="R180"/>
<instance part="GND1" gate="1" x="53.34" y="12.7"/>
<instance part="P+1" gate="VCC" x="55.88" y="71.12"/>
<instance part="TP1" gate="G$1" x="96.52" y="55.88"/>
<instance part="TP2" gate="G$1" x="96.52" y="60.96"/>
<instance part="TP3" gate="G$1" x="96.52" y="48.26"/>
<instance part="TP4" gate="G$1" x="96.52" y="45.72"/>
<instance part="TP5" gate="G$1" x="96.52" y="38.1"/>
<instance part="TP6" gate="G$1" x="96.52" y="30.48"/>
<instance part="GND3" gate="1" x="-71.12" y="-55.88" rot="R90"/>
<instance part="P+2" gate="VCC" x="-81.28" y="-66.04" rot="R90"/>
<instance part="IC1" gate="G$1" x="-38.1" y="-33.02"/>
<instance part="BT1" gate="G$1" x="2.54" y="-33.02" rot="R270"/>
<instance part="C2" gate="G$1" x="-10.16" y="-33.02" rot="R180"/>
<instance part="R5" gate="G$1" x="-17.78" y="-12.7" rot="R90"/>
<instance part="R6" gate="G$1" x="-10.16" y="-12.7" rot="R90"/>
<instance part="P+4" gate="VCC" x="-35.56" y="-2.54"/>
<instance part="GND4" gate="1" x="-38.1" y="-50.8"/>
<instance part="GND5" gate="1" x="-5.08" y="-43.18"/>
<instance part="M1" gate="A" x="-119.38" y="-15.24" rot="R90"/>
<instance part="GND6" gate="1" x="-127" y="-40.64" rot="R270"/>
<instance part="P+5" gate="VCC" x="-124.46" y="-45.72" rot="R270"/>
<instance part="U2" gate="G$1" x="-35.56" y="53.34"/>
<instance part="F1" gate="G$1" x="-81.28" y="55.88"/>
<instance part="C6" gate="G$1" x="-63.5" y="40.64" rot="R180"/>
<instance part="C3" gate="G$1" x="-58.42" y="38.1"/>
<instance part="C4" gate="G$1" x="-10.16" y="40.64" rot="R180"/>
<instance part="C5" gate="G$1" x="-2.54" y="38.1"/>
<instance part="GND7" gate="1" x="-38.1" y="22.86"/>
<instance part="R7" gate="G$1" x="53.34" y="-7.62" rot="R90"/>
<instance part="R8" gate="G$1" x="38.1" y="-35.56" rot="R180"/>
<instance part="T1" gate="G$1" x="50.8" y="-35.56"/>
<instance part="GND8" gate="1" x="53.34" y="-45.72"/>
<instance part="J2" gate="J$1" x="78.74" y="-20.32"/>
<instance part="R10" gate="G$1" x="83.82" y="35.56"/>
<instance part="R9" gate="G$1" x="20.32" y="40.64" rot="R180"/>
<instance part="S1" gate="G$1" x="12.7" y="50.8"/>
<instance part="R11" gate="G$1" x="43.18" y="-20.32" rot="R90"/>
<instance part="U$2" gate="G$1" x="86.36" y="-17.78"/>
<instance part="J3" gate="J1" x="-119.38" y="22.86"/>
</instances>
<busses>
<bus name="B$1">
<segment>
<wire x1="-139.7" y1="81.28" x2="-139.7" y2="-71.12" width="0.762" layer="92"/>
<wire x1="-139.7" y1="-71.12" x2="144.78" y2="-71.12" width="0.762" layer="92"/>
<wire x1="144.78" y1="-71.12" x2="144.78" y2="81.28" width="0.762" layer="92"/>
<wire x1="144.78" y1="81.28" x2="-139.7" y2="81.28" width="0.762" layer="92"/>
</segment>
</bus>
</busses>
<nets>
<net name="N$1" class="0">
<segment>
<pinref part="U1" gate="G$1" pin="RESET"/>
<wire x1="40.64" y1="48.26" x2="38.1" y2="48.26" width="0.1524" layer="91"/>
<pinref part="R2" gate="G$1" pin="1"/>
<wire x1="38.1" y1="48.26" x2="38.1" y2="55.88" width="0.1524" layer="91"/>
<pinref part="TP1" gate="G$1" pin="1"/>
<wire x1="96.52" y1="55.88" x2="38.1" y2="55.88" width="0.1524" layer="91"/>
<junction x="38.1" y="55.88"/>
</segment>
</net>
<net name="N$2" class="0">
<segment>
<pinref part="U1" gate="G$1" pin="CH_PD"/>
<pinref part="R1" gate="G$1" pin="1"/>
<wire x1="40.64" y1="43.18" x2="30.48" y2="43.18" width="0.1524" layer="91"/>
<wire x1="30.48" y1="43.18" x2="30.48" y2="55.88" width="0.1524" layer="91"/>
</segment>
</net>
<net name="GND" class="0">
<segment>
<pinref part="C1" gate="G$1" pin="1"/>
<wire x1="27.94" y1="20.32" x2="27.94" y2="15.24" width="0.1524" layer="91"/>
<wire x1="27.94" y1="15.24" x2="53.34" y2="15.24" width="0.1524" layer="91"/>
<pinref part="R4" gate="G$1" pin="1"/>
<wire x1="53.34" y1="15.24" x2="76.2" y2="15.24" width="0.1524" layer="91"/>
<wire x1="76.2" y1="15.24" x2="81.28" y2="15.24" width="0.1524" layer="91"/>
<wire x1="81.28" y1="15.24" x2="81.28" y2="20.32" width="0.1524" layer="91"/>
<pinref part="GND1" gate="1" pin="GND"/>
<junction x="53.34" y="15.24"/>
<pinref part="U1" gate="G$1" pin="GND"/>
<wire x1="73.66" y1="30.48" x2="76.2" y2="30.48" width="0.1524" layer="91"/>
<wire x1="76.2" y1="30.48" x2="76.2" y2="15.24" width="0.1524" layer="91"/>
<junction x="76.2" y="15.24"/>
<pinref part="TP6" gate="G$1" pin="1"/>
<wire x1="96.52" y1="30.48" x2="96.52" y2="15.24" width="0.1524" layer="91"/>
<wire x1="96.52" y1="15.24" x2="81.28" y2="15.24" width="0.1524" layer="91"/>
<junction x="81.28" y="15.24"/>
</segment>
<segment>
<pinref part="U$1" gate="G$1" pin="GND"/>
<pinref part="GND3" gate="1" pin="GND"/>
<wire x1="-76.2" y1="-50.8" x2="-76.2" y2="-55.88" width="0.1524" layer="91"/>
<wire x1="-76.2" y1="-55.88" x2="-73.66" y2="-55.88" width="0.1524" layer="91"/>
</segment>
<segment>
<pinref part="IC1" gate="G$1" pin="NC"/>
<wire x1="-53.34" y1="-33.02" x2="-55.88" y2="-33.02" width="0.1524" layer="91"/>
<wire x1="-55.88" y1="-33.02" x2="-55.88" y2="-35.56" width="0.1524" layer="91"/>
<wire x1="-55.88" y1="-35.56" x2="-55.88" y2="-38.1" width="0.1524" layer="91"/>
<wire x1="-55.88" y1="-38.1" x2="-55.88" y2="-40.64" width="0.1524" layer="91"/>
<wire x1="-55.88" y1="-40.64" x2="-55.88" y2="-48.26" width="0.1524" layer="91"/>
<wire x1="-55.88" y1="-48.26" x2="-38.1" y2="-48.26" width="0.1524" layer="91"/>
<pinref part="IC1" gate="G$1" pin="GND"/>
<wire x1="-38.1" y1="-48.26" x2="-20.32" y2="-48.26" width="0.1524" layer="91"/>
<wire x1="-20.32" y1="-48.26" x2="-20.32" y2="-40.64" width="0.1524" layer="91"/>
<wire x1="-20.32" y1="-40.64" x2="-20.32" y2="-38.1" width="0.1524" layer="91"/>
<wire x1="-20.32" y1="-38.1" x2="-20.32" y2="-35.56" width="0.1524" layer="91"/>
<wire x1="-20.32" y1="-35.56" x2="-20.32" y2="-33.02" width="0.1524" layer="91"/>
<wire x1="-20.32" y1="-33.02" x2="-20.32" y2="-30.48" width="0.1524" layer="91"/>
<wire x1="-20.32" y1="-30.48" x2="-22.86" y2="-30.48" width="0.1524" layer="91"/>
<pinref part="IC1" gate="G$1" pin="NC1"/>
<wire x1="-53.34" y1="-35.56" x2="-55.88" y2="-35.56" width="0.1524" layer="91"/>
<junction x="-55.88" y="-35.56"/>
<pinref part="IC1" gate="G$1" pin="NC2"/>
<wire x1="-53.34" y1="-38.1" x2="-55.88" y2="-38.1" width="0.1524" layer="91"/>
<junction x="-55.88" y="-38.1"/>
<pinref part="IC1" gate="G$1" pin="NC3"/>
<wire x1="-53.34" y1="-40.64" x2="-55.88" y2="-40.64" width="0.1524" layer="91"/>
<junction x="-55.88" y="-40.64"/>
<pinref part="IC1" gate="G$1" pin="NC4"/>
<wire x1="-22.86" y1="-40.64" x2="-20.32" y2="-40.64" width="0.1524" layer="91"/>
<junction x="-20.32" y="-40.64"/>
<pinref part="IC1" gate="G$1" pin="NC5"/>
<wire x1="-22.86" y1="-38.1" x2="-20.32" y2="-38.1" width="0.1524" layer="91"/>
<junction x="-20.32" y="-38.1"/>
<pinref part="IC1" gate="G$1" pin="NC6"/>
<wire x1="-22.86" y1="-35.56" x2="-20.32" y2="-35.56" width="0.1524" layer="91"/>
<junction x="-20.32" y="-35.56"/>
<pinref part="IC1" gate="G$1" pin="NC7"/>
<wire x1="-22.86" y1="-33.02" x2="-20.32" y2="-33.02" width="0.1524" layer="91"/>
<junction x="-20.32" y="-33.02"/>
<pinref part="GND4" gate="1" pin="GND"/>
<junction x="-38.1" y="-48.26"/>
</segment>
<segment>
<pinref part="C2" gate="G$1" pin="1"/>
<wire x1="-10.16" y1="-38.1" x2="-10.16" y2="-40.64" width="0.1524" layer="91"/>
<pinref part="BT1" gate="G$1" pin="-"/>
<wire x1="-10.16" y1="-40.64" x2="-5.08" y2="-40.64" width="0.1524" layer="91"/>
<wire x1="-5.08" y1="-40.64" x2="2.54" y2="-40.64" width="0.1524" layer="91"/>
<wire x1="2.54" y1="-40.64" x2="2.54" y2="-38.1" width="0.1524" layer="91"/>
<pinref part="GND5" gate="1" pin="GND"/>
<junction x="-5.08" y="-40.64"/>
</segment>
<segment>
<pinref part="M1" gate="A" pin="3"/>
<pinref part="GND6" gate="1" pin="GND"/>
<wire x1="-123.19" y1="-17.78" x2="-123.19" y2="-40.64" width="0.1524" layer="91"/>
<wire x1="-123.19" y1="-40.64" x2="-124.46" y2="-40.64" width="0.1524" layer="91"/>
</segment>
<segment>
<pinref part="C6" gate="G$1" pin="1"/>
<wire x1="-63.5" y1="35.56" x2="-63.5" y2="25.4" width="0.1524" layer="91"/>
<wire x1="-63.5" y1="25.4" x2="-58.42" y2="25.4" width="0.1524" layer="91"/>
<pinref part="C4" gate="G$1" pin="1"/>
<wire x1="-58.42" y1="25.4" x2="-38.1" y2="25.4" width="0.1524" layer="91"/>
<wire x1="-38.1" y1="25.4" x2="-20.32" y2="25.4" width="0.1524" layer="91"/>
<wire x1="-20.32" y1="25.4" x2="-10.16" y2="25.4" width="0.1524" layer="91"/>
<wire x1="-10.16" y1="25.4" x2="-10.16" y2="35.56" width="0.1524" layer="91"/>
<pinref part="C5" gate="G$1" pin="2"/>
<wire x1="-2.54" y1="35.56" x2="-2.54" y2="25.4" width="0.1524" layer="91"/>
<wire x1="-2.54" y1="25.4" x2="-10.16" y2="25.4" width="0.1524" layer="91"/>
<junction x="-10.16" y="25.4"/>
<pinref part="C3" gate="G$1" pin="2"/>
<wire x1="-58.42" y1="35.56" x2="-58.42" y2="25.4" width="0.1524" layer="91"/>
<junction x="-58.42" y="25.4"/>
<pinref part="U2" gate="G$1" pin="ADJ/GND"/>
<wire x1="-20.32" y1="50.8" x2="-20.32" y2="25.4" width="0.1524" layer="91"/>
<junction x="-20.32" y="25.4"/>
<pinref part="GND7" gate="1" pin="GND"/>
<junction x="-38.1" y="25.4"/>
</segment>
<segment>
<pinref part="T1" gate="G$1" pin="E"/>
<wire x1="53.34" y1="-40.64" x2="53.34" y2="-48.26" width="0.1524" layer="91"/>
<wire x1="53.34" y1="-48.26" x2="53.34" y2="-43.18" width="0.1524" layer="91"/>
<pinref part="GND8" gate="1" pin="GND"/>
</segment>
<segment>
<pinref part="J2" gate="J$1" pin="1"/>
<wire x1="86.36" y1="-22.86" x2="88.9" y2="-22.86" width="0.1524" layer="91"/>
<label x="88.9" y="-22.86" size="2.54" layer="95" xref="yes"/>
</segment>
<segment>
<pinref part="J3" gate="J1" pin="GND"/>
<wire x1="-114.3" y1="20.32" x2="-109.22" y2="20.32" width="0.1524" layer="91"/>
<label x="-109.22" y="20.32" size="1.778" layer="95" xref="yes"/>
</segment>
</net>
<net name="VCC" class="0">
<segment>
<pinref part="R1" gate="G$1" pin="2"/>
<wire x1="30.48" y1="66.04" x2="30.48" y2="68.58" width="0.1524" layer="91"/>
<pinref part="R3" gate="G$1" pin="2"/>
<wire x1="30.48" y1="68.58" x2="38.1" y2="68.58" width="0.1524" layer="91"/>
<wire x1="38.1" y1="68.58" x2="55.88" y2="68.58" width="0.1524" layer="91"/>
<wire x1="55.88" y1="68.58" x2="81.28" y2="68.58" width="0.1524" layer="91"/>
<wire x1="81.28" y1="68.58" x2="81.28" y2="66.04" width="0.1524" layer="91"/>
<pinref part="R2" gate="G$1" pin="2"/>
<wire x1="38.1" y1="66.04" x2="38.1" y2="68.58" width="0.1524" layer="91"/>
<junction x="38.1" y="68.58"/>
<pinref part="P+1" gate="VCC" pin="VCC"/>
<junction x="55.88" y="68.58"/>
<pinref part="U1" gate="G$1" pin="VCC"/>
<pinref part="C1" gate="G$1" pin="2"/>
<wire x1="40.64" y1="30.48" x2="27.94" y2="30.48" width="0.1524" layer="91"/>
<wire x1="27.94" y1="30.48" x2="27.94" y2="27.94" width="0.1524" layer="91"/>
<wire x1="27.94" y1="30.48" x2="27.94" y2="68.58" width="0.1524" layer="91"/>
<junction x="27.94" y="30.48"/>
<wire x1="27.94" y1="68.58" x2="30.48" y2="68.58" width="0.1524" layer="91"/>
<junction x="30.48" y="68.58"/>
<pinref part="TP2" gate="G$1" pin="1"/>
<wire x1="96.52" y1="60.96" x2="96.52" y2="68.58" width="0.1524" layer="91"/>
<wire x1="96.52" y1="68.58" x2="81.28" y2="68.58" width="0.1524" layer="91"/>
<junction x="81.28" y="68.58"/>
<junction x="27.94" y="68.58"/>
<pinref part="S1" gate="G$1" pin="I"/>
<wire x1="15.24" y1="68.58" x2="27.94" y2="68.58" width="0.1524" layer="91"/>
<wire x1="13.48" y1="55.1" x2="13.48" y2="68.58" width="0.1524" layer="91"/>
<wire x1="13.48" y1="68.58" x2="15.24" y2="68.58" width="0.1524" layer="91"/>
</segment>
<segment>
<pinref part="R6" gate="G$1" pin="2"/>
<wire x1="-10.16" y1="-7.62" x2="-10.16" y2="-5.08" width="0.1524" layer="91"/>
<wire x1="-10.16" y1="-5.08" x2="-17.78" y2="-5.08" width="0.1524" layer="91"/>
<pinref part="R5" gate="G$1" pin="2"/>
<wire x1="-17.78" y1="-5.08" x2="-17.78" y2="-7.62" width="0.1524" layer="91"/>
<wire x1="-17.78" y1="-5.08" x2="-35.56" y2="-5.08" width="0.1524" layer="91"/>
<wire x1="-35.56" y1="-5.08" x2="-58.42" y2="-5.08" width="0.1524" layer="91"/>
<wire x1="-58.42" y1="-5.08" x2="-58.42" y2="-25.4" width="0.1524" layer="91"/>
<junction x="-17.78" y="-5.08"/>
<pinref part="IC1" gate="G$1" pin="VCC"/>
<wire x1="-58.42" y1="-25.4" x2="-53.34" y2="-25.4" width="0.1524" layer="91"/>
<pinref part="P+4" gate="VCC" pin="VCC"/>
<junction x="-35.56" y="-5.08"/>
</segment>
<segment>
<pinref part="U$1" gate="G$1" pin="VCC"/>
<pinref part="P+2" gate="VCC" pin="VCC"/>
<wire x1="-78.74" y1="-50.8" x2="-78.74" y2="-66.04" width="0.1524" layer="91"/>
</segment>
<segment>
<pinref part="M1" gate="A" pin="1"/>
<pinref part="P+5" gate="VCC" pin="VCC"/>
<wire x1="-128.27" y1="-17.78" x2="-128.27" y2="-45.72" width="0.1524" layer="91"/>
<wire x1="-128.27" y1="-45.72" x2="-127" y2="-45.72" width="0.1524" layer="91"/>
</segment>
<segment>
<pinref part="U2" gate="G$1" pin="VOUT"/>
<pinref part="C5" gate="G$1" pin="1"/>
<wire x1="-20.32" y1="55.88" x2="-10.16" y2="55.88" width="0.1524" layer="91"/>
<wire x1="-10.16" y1="55.88" x2="-2.54" y2="55.88" width="0.1524" layer="91"/>
<wire x1="-2.54" y1="55.88" x2="-2.54" y2="43.18" width="0.1524" layer="91"/>
<pinref part="C4" gate="G$1" pin="2"/>
<wire x1="-10.16" y1="43.18" x2="-10.16" y2="55.88" width="0.1524" layer="91"/>
<junction x="-10.16" y="55.88"/>
<label x="-2.54" y="55.88" size="1.778" layer="95" xref="yes"/>
</segment>
</net>
<net name="N$3" class="0">
<segment>
<pinref part="TP3" gate="G$1" pin="1"/>
<pinref part="U1" gate="G$1" pin="TX"/>
<wire x1="96.52" y1="48.26" x2="73.66" y2="48.26" width="0.1524" layer="91"/>
</segment>
</net>
<net name="N$5" class="0">
<segment>
<pinref part="TP4" gate="G$1" pin="1"/>
<pinref part="U1" gate="G$1" pin="RX"/>
<wire x1="96.52" y1="45.72" x2="73.66" y2="45.72" width="0.1524" layer="91"/>
</segment>
</net>
<net name="N$8" class="0">
<segment>
<pinref part="C2" gate="G$1" pin="2"/>
<pinref part="IC1" gate="G$1" pin="VBAT"/>
<wire x1="-10.16" y1="-30.48" x2="-10.16" y2="-27.94" width="0.1524" layer="91"/>
<wire x1="-10.16" y1="-27.94" x2="-22.86" y2="-27.94" width="0.1524" layer="91"/>
<pinref part="BT1" gate="G$1" pin="+"/>
<wire x1="2.54" y1="-27.94" x2="-10.16" y2="-27.94" width="0.1524" layer="91"/>
<junction x="-10.16" y="-27.94"/>
</segment>
</net>
<net name="SDA" class="0">
<segment>
<pinref part="IC1" gate="G$1" pin="SDA"/>
<wire x1="-22.86" y1="-25.4" x2="-10.16" y2="-25.4" width="0.1524" layer="91"/>
<label x="2.54" y="-25.4" size="1.778" layer="95" xref="yes"/>
<pinref part="R6" gate="G$1" pin="1"/>
<wire x1="-10.16" y1="-25.4" x2="2.54" y2="-25.4" width="0.1524" layer="91"/>
<wire x1="-10.16" y1="-17.78" x2="-10.16" y2="-25.4" width="0.1524" layer="91"/>
<junction x="-10.16" y="-25.4"/>
</segment>
<segment>
<pinref part="U$1" gate="G$1" pin="SDA"/>
<wire x1="-83.82" y1="-50.8" x2="-83.82" y2="-55.88" width="0.1524" layer="91"/>
<label x="-83.82" y="-55.88" size="1.778" layer="95" rot="R270" xref="yes"/>
</segment>
<segment>
<pinref part="U1" gate="G$1" pin="GPIO4"/>
<wire x1="73.66" y1="43.18" x2="83.82" y2="43.18" width="0.1524" layer="91"/>
<label x="83.82" y="43.18" size="1.778" layer="95" xref="yes"/>
</segment>
</net>
<net name="SCL" class="0">
<segment>
<pinref part="IC1" gate="G$1" pin="SCL"/>
<wire x1="-22.86" y1="-22.86" x2="-17.78" y2="-22.86" width="0.1524" layer="91"/>
<pinref part="R5" gate="G$1" pin="1"/>
<wire x1="-17.78" y1="-22.86" x2="-10.16" y2="-22.86" width="0.1524" layer="91"/>
<wire x1="-10.16" y1="-22.86" x2="2.54" y2="-22.86" width="0.1524" layer="91"/>
<wire x1="-17.78" y1="-17.78" x2="-17.78" y2="-22.86" width="0.1524" layer="91"/>
<junction x="-17.78" y="-22.86"/>
<label x="2.54" y="-22.86" size="1.778" layer="95" xref="yes"/>
</segment>
<segment>
<pinref part="U$1" gate="G$1" pin="SCL"/>
<wire x1="-81.28" y1="-50.8" x2="-81.28" y2="-55.88" width="0.1524" layer="91"/>
<label x="-81.28" y="-55.88" size="1.778" layer="95" rot="R270" xref="yes"/>
</segment>
<segment>
<pinref part="U1" gate="G$1" pin="GPIO5"/>
<wire x1="73.66" y1="40.64" x2="83.82" y2="40.64" width="0.1524" layer="91"/>
<label x="83.82" y="40.64" size="1.778" layer="95" xref="yes"/>
</segment>
</net>
<net name="SS" class="0">
<segment>
<pinref part="M1" gate="A" pin="8"/>
<wire x1="-110.49" y1="-17.78" x2="-110.49" y2="-27.94" width="0.1524" layer="91"/>
<label x="-109.22" y="-27.94" size="1.778" layer="95" rot="R270" xref="yes"/>
</segment>
<segment>
<pinref part="U1" gate="G$1" pin="GPIO0"/>
<pinref part="R3" gate="G$1" pin="1"/>
<wire x1="73.66" y1="38.1" x2="81.28" y2="38.1" width="0.1524" layer="91"/>
<wire x1="81.28" y1="38.1" x2="81.28" y2="55.88" width="0.1524" layer="91"/>
<pinref part="TP5" gate="G$1" pin="1"/>
<wire x1="96.52" y1="38.1" x2="81.28" y2="38.1" width="0.1524" layer="91"/>
<junction x="81.28" y="38.1"/>
<label x="99.06" y="38.1" size="1.778" layer="95" xref="yes"/>
</segment>
</net>
<net name="SCK" class="0">
<segment>
<pinref part="M1" gate="A" pin="7"/>
<wire x1="-113.03" y1="-17.78" x2="-113.03" y2="-27.94" width="0.1524" layer="91"/>
<label x="-111.76" y="-27.94" size="1.778" layer="95" rot="R270" xref="yes"/>
</segment>
<segment>
<pinref part="U1" gate="G$1" pin="GPIO14"/>
<wire x1="40.64" y1="38.1" x2="38.1" y2="38.1" width="0.1524" layer="91"/>
<label x="38.1" y="38.1" size="1.778" layer="95" rot="R180" xref="yes"/>
</segment>
</net>
<net name="MOSI" class="0">
<segment>
<pinref part="M1" gate="A" pin="6"/>
<wire x1="-115.57" y1="-17.78" x2="-115.57" y2="-27.94" width="0.1524" layer="91"/>
<label x="-114.3" y="-27.94" size="1.778" layer="95" rot="R270" xref="yes"/>
</segment>
<segment>
<pinref part="U1" gate="G$1" pin="GPIO13"/>
<wire x1="40.64" y1="33.02" x2="38.1" y2="33.02" width="0.1524" layer="91"/>
<label x="38.1" y="33.02" size="1.778" layer="95" rot="R180" xref="yes"/>
</segment>
</net>
<net name="MISO" class="0">
<segment>
<pinref part="M1" gate="A" pin="5"/>
<wire x1="-118.11" y1="-17.78" x2="-118.11" y2="-27.94" width="0.1524" layer="91"/>
<label x="-116.84" y="-27.94" size="1.778" layer="95" rot="R270" xref="yes"/>
</segment>
<segment>
<pinref part="U1" gate="G$1" pin="GPIO12"/>
<wire x1="40.64" y1="35.56" x2="38.1" y2="35.56" width="0.1524" layer="91"/>
<label x="38.1" y="35.56" size="1.778" layer="95" rot="R180" xref="yes"/>
</segment>
</net>
<net name="VBUS" class="0">
<segment>
<pinref part="F1" gate="G$1" pin="1"/>
<wire x1="-86.36" y1="55.88" x2="-88.9" y2="55.88" width="0.1524" layer="91"/>
<label x="-88.9" y="55.88" size="1.778" layer="95" rot="R180" xref="yes"/>
</segment>
<segment>
<pinref part="J3" gate="J1" pin="VBUS"/>
<wire x1="-114.3" y1="30.48" x2="-109.22" y2="30.48" width="0.1524" layer="91"/>
<label x="-109.22" y="30.48" size="1.778" layer="95" xref="yes"/>
</segment>
</net>
<net name="5V" class="0">
<segment>
<pinref part="F1" gate="G$1" pin="2"/>
<pinref part="U2" gate="G$1" pin="VIN"/>
<wire x1="-73.66" y1="55.88" x2="-63.5" y2="55.88" width="0.1524" layer="91"/>
<pinref part="C6" gate="G$1" pin="2"/>
<wire x1="-63.5" y1="55.88" x2="-58.42" y2="55.88" width="0.1524" layer="91"/>
<wire x1="-58.42" y1="55.88" x2="-50.8" y2="55.88" width="0.1524" layer="91"/>
<wire x1="-63.5" y1="43.18" x2="-63.5" y2="55.88" width="0.1524" layer="91"/>
<junction x="-63.5" y="55.88"/>
<pinref part="C3" gate="G$1" pin="1"/>
<wire x1="-58.42" y1="43.18" x2="-58.42" y2="55.88" width="0.1524" layer="91"/>
<junction x="-58.42" y="55.88"/>
<label x="-71.12" y="55.88" size="1.778" layer="95" rot="R90" xref="yes"/>
</segment>
<segment>
<pinref part="R7" gate="G$1" pin="2"/>
<wire x1="53.34" y1="0" x2="53.34" y2="-2.54" width="0.1524" layer="91"/>
<label x="53.34" y="0" size="1.778" layer="95" rot="R90" xref="yes"/>
</segment>
<segment>
<pinref part="J2" gate="J$1" pin="3"/>
<wire x1="86.36" y1="-17.78" x2="88.9" y2="-17.78" width="0.1524" layer="91"/>
<label x="88.9" y="-17.78" size="2.54" layer="95" xref="yes"/>
</segment>
</net>
<net name="N$4" class="0">
<segment>
<pinref part="T1" gate="G$1" pin="C"/>
<pinref part="R11" gate="G$1" pin="1"/>
<wire x1="53.34" y1="-27.94" x2="53.34" y2="-30.48" width="0.1524" layer="91"/>
<wire x1="43.18" y1="-25.4" x2="43.18" y2="-30.48" width="0.1524" layer="91"/>
<wire x1="43.18" y1="-30.48" x2="53.34" y2="-30.48" width="0.1524" layer="91"/>
<junction x="53.34" y="-30.48"/>
<pinref part="U$2" gate="G$1" pin="-"/>
</segment>
</net>
<net name="N$7" class="0">
<segment>
<pinref part="R7" gate="G$1" pin="1"/>
<pinref part="R11" gate="G$1" pin="2"/>
<wire x1="43.18" y1="-15.24" x2="43.18" y2="-12.7" width="0.1524" layer="91"/>
<wire x1="43.18" y1="-12.7" x2="53.34" y2="-12.7" width="0.1524" layer="91"/>
<junction x="53.34" y="-12.7"/>
<pinref part="U$2" gate="G$1" pin="+"/>
</segment>
</net>
<net name="N$9" class="0">
<segment>
<pinref part="T1" gate="G$1" pin="B"/>
<pinref part="R8" gate="G$1" pin="1"/>
<wire x1="48.26" y1="-35.56" x2="45.72" y2="-35.56" width="0.1524" layer="91"/>
<wire x1="45.72" y1="-35.56" x2="43.18" y2="-35.56" width="0.1524" layer="91"/>
</segment>
</net>
<net name="BUZZ" class="0">
<segment>
<pinref part="R8" gate="G$1" pin="2"/>
<wire x1="33.02" y1="-35.56" x2="30.48" y2="-35.56" width="0.1524" layer="91"/>
<label x="30.48" y="-35.56" size="1.778" layer="95" rot="R180" xref="yes"/>
</segment>
<segment>
<pinref part="R4" gate="G$1" pin="2"/>
<wire x1="81.28" y1="30.48" x2="81.28" y2="33.02" width="0.1524" layer="91"/>
<pinref part="U1" gate="G$1" pin="GPIO15"/>
<wire x1="81.28" y1="33.02" x2="73.66" y2="33.02" width="0.1524" layer="91"/>
<wire x1="81.28" y1="33.02" x2="86.36" y2="33.02" width="0.1524" layer="91"/>
<junction x="81.28" y="33.02"/>
<label x="86.36" y="33.02" size="1.778" layer="95" xref="yes"/>
</segment>
</net>
<net name="RELAY" class="0">
<segment>
<label x="109.22" y="35.56" size="2.54" layer="95" xref="yes"/>
<wire x1="91.44" y1="35.56" x2="109.22" y2="35.56" width="0.1524" layer="91"/>
<pinref part="R10" gate="G$1" pin="2"/>
<wire x1="88.9" y1="35.56" x2="91.44" y2="35.56" width="0.1524" layer="91"/>
</segment>
<segment>
<pinref part="J2" gate="J$1" pin="2"/>
<wire x1="86.36" y1="-20.32" x2="88.9" y2="-20.32" width="0.1524" layer="91"/>
<label x="88.9" y="-20.32" size="2.54" layer="95" xref="yes"/>
</segment>
</net>
<net name="N$6" class="0">
<segment>
<pinref part="R10" gate="G$1" pin="1"/>
<pinref part="U1" gate="G$1" pin="GPIO2"/>
<wire x1="78.74" y1="35.56" x2="73.66" y2="35.56" width="0.1524" layer="91"/>
</segment>
</net>
<net name="N$10" class="0">
<segment>
<pinref part="U1" gate="G$1" pin="GPIO16"/>
<pinref part="R9" gate="G$1" pin="1"/>
<wire x1="25.4" y1="40.64" x2="40.64" y2="40.64" width="0.1524" layer="91"/>
</segment>
</net>
<net name="N$11" class="0">
<segment>
<pinref part="S1" gate="G$1" pin="O"/>
<pinref part="R9" gate="G$1" pin="2"/>
<wire x1="13.48" y1="51.1" x2="13.48" y2="40.64" width="0.1524" layer="91"/>
<wire x1="13.48" y1="40.64" x2="15.24" y2="40.64" width="0.1524" layer="91"/>
</segment>
</net>
</nets>
</sheet>
</sheets>
</schematic>
</drawing>
<compatibility>
<note version="6.3" minversion="6.2.2" severity="warning">
Since Version 6.2.2 text objects can contain more than one line,
which will not be processed correctly with this version.
</note>
<note version="8.2" severity="warning">
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
</note>
<note version="8.3" severity="warning">
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
</note>
<note version="8.3" severity="warning">
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.
</note>
</compatibility>
</eagle>