<pre>&lt;?xml version=&quot;1.0&quot; encoding=&quot;utf-8&quot;?&gt;
&lt;!DOCTYPE eagle SYSTEM &quot;eagle.dtd&quot;&gt;
&lt;eagle version=&quot;9.5.0&quot;&gt;
&lt;drawing&gt;
&lt;settings&gt;
&lt;setting alwaysvectorfont=&quot;no&quot;/&gt;
&lt;setting verticaltext=&quot;up&quot;/&gt;
&lt;/settings&gt;
&lt;grid distance=&quot;0.1&quot; unitdist=&quot;inch&quot; unit=&quot;inch&quot; style=&quot;lines&quot; multiple=&quot;1&quot; display=&quot;no&quot; altdistance=&quot;0.01&quot; altunitdist=&quot;inch&quot; altunit=&quot;inch&quot;/&gt;
&lt;layers&gt;
&lt;layer number=&quot;1&quot; name=&quot;Top&quot; color=&quot;4&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;2&quot; name=&quot;Route2&quot; color=&quot;16&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;3&quot; name=&quot;Route3&quot; color=&quot;17&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;4&quot; name=&quot;Route4&quot; color=&quot;18&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;5&quot; name=&quot;Route5&quot; color=&quot;19&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;6&quot; name=&quot;Route6&quot; color=&quot;25&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;7&quot; name=&quot;Route7&quot; color=&quot;26&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;8&quot; name=&quot;Route8&quot; color=&quot;27&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;9&quot; name=&quot;Route9&quot; color=&quot;28&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;10&quot; name=&quot;Route10&quot; color=&quot;29&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;11&quot; name=&quot;Route11&quot; color=&quot;30&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;12&quot; name=&quot;Route12&quot; color=&quot;20&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;13&quot; name=&quot;Route13&quot; color=&quot;21&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;14&quot; name=&quot;Route14&quot; color=&quot;22&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;15&quot; name=&quot;Route15&quot; color=&quot;23&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;16&quot; name=&quot;Bottom&quot; color=&quot;1&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;17&quot; name=&quot;Pads&quot; color=&quot;2&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;18&quot; name=&quot;Vias&quot; color=&quot;2&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;19&quot; name=&quot;Unrouted&quot; color=&quot;6&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;20&quot; name=&quot;Dimension&quot; color=&quot;24&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;21&quot; name=&quot;tPlace&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;22&quot; name=&quot;bPlace&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;23&quot; name=&quot;tOrigins&quot; color=&quot;15&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;24&quot; name=&quot;bOrigins&quot; color=&quot;15&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;25&quot; name=&quot;tNames&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;26&quot; name=&quot;bNames&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;27&quot; name=&quot;tValues&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;28&quot; name=&quot;bValues&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;29&quot; name=&quot;tStop&quot; color=&quot;7&quot; fill=&quot;3&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;30&quot; name=&quot;bStop&quot; color=&quot;7&quot; fill=&quot;6&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;31&quot; name=&quot;tCream&quot; color=&quot;7&quot; fill=&quot;4&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;32&quot; name=&quot;bCream&quot; color=&quot;7&quot; fill=&quot;5&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;33&quot; name=&quot;tFinish&quot; color=&quot;6&quot; fill=&quot;3&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;34&quot; name=&quot;bFinish&quot; color=&quot;6&quot; fill=&quot;6&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;35&quot; name=&quot;tGlue&quot; color=&quot;7&quot; fill=&quot;4&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;36&quot; name=&quot;bGlue&quot; color=&quot;7&quot; fill=&quot;5&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;37&quot; name=&quot;tTest&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;38&quot; name=&quot;bTest&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;39&quot; name=&quot;tKeepout&quot; color=&quot;4&quot; fill=&quot;11&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;40&quot; name=&quot;bKeepout&quot; color=&quot;1&quot; fill=&quot;11&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;41&quot; name=&quot;tRestrict&quot; color=&quot;4&quot; fill=&quot;10&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;42&quot; name=&quot;bRestrict&quot; color=&quot;1&quot; fill=&quot;10&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;43&quot; name=&quot;vRestrict&quot; color=&quot;2&quot; fill=&quot;10&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;44&quot; name=&quot;Drills&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;45&quot; name=&quot;Holes&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;46&quot; name=&quot;Milling&quot; color=&quot;3&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;47&quot; name=&quot;Measures&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;48&quot; name=&quot;Document&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;49&quot; name=&quot;Reference&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;50&quot; name=&quot;dxf&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;51&quot; name=&quot;tDocu&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;52&quot; name=&quot;bDocu&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;53&quot; name=&quot;tGND_GNDA&quot; color=&quot;7&quot; fill=&quot;9&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;54&quot; name=&quot;bGND_GNDA&quot; color=&quot;1&quot; fill=&quot;9&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;56&quot; name=&quot;wert&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;57&quot; name=&quot;tCAD&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;59&quot; name=&quot;tCarbon&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;60&quot; name=&quot;bCarbon&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;88&quot; name=&quot;SimResults&quot; color=&quot;9&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;89&quot; name=&quot;SimProbes&quot; color=&quot;9&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;90&quot; name=&quot;Modules&quot; color=&quot;5&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;91&quot; name=&quot;Nets&quot; color=&quot;2&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;92&quot; name=&quot;Busses&quot; color=&quot;1&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;93&quot; name=&quot;Pins&quot; color=&quot;2&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;94&quot; name=&quot;Symbols&quot; color=&quot;4&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;95&quot; name=&quot;Names&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;96&quot; name=&quot;Values&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;97&quot; name=&quot;Info&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;98&quot; name=&quot;Guide&quot; color=&quot;6&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;99&quot; name=&quot;SpiceOrder&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;100&quot; name=&quot;Muster&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;101&quot; name=&quot;Patch_Top&quot; color=&quot;12&quot; fill=&quot;4&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;102&quot; name=&quot;Vscore&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;103&quot; name=&quot;tMap&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;104&quot; name=&quot;Name&quot; color=&quot;16&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;105&quot; name=&quot;tPlate&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;106&quot; name=&quot;bPlate&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;107&quot; name=&quot;Crop&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;108&quot; name=&quot;tplace-old&quot; color=&quot;10&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;109&quot; name=&quot;ref-old&quot; color=&quot;11&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;110&quot; name=&quot;fp0&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;111&quot; name=&quot;LPC17xx&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;112&quot; name=&quot;tSilk&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;113&quot; name=&quot;IDFDebug&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;114&quot; name=&quot;Badge_Outline&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;115&quot; name=&quot;ReferenceISLANDS&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;116&quot; name=&quot;Patch_BOT&quot; color=&quot;9&quot; fill=&quot;4&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;118&quot; name=&quot;Rect_Pads&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;121&quot; name=&quot;_tsilk&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;122&quot; name=&quot;_bsilk&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;123&quot; name=&quot;tTestmark&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;124&quot; name=&quot;bTestmark&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;125&quot; name=&quot;_tNames&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;126&quot; name=&quot;_bNames&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;127&quot; name=&quot;_tValues&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;128&quot; name=&quot;_bValues&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;129&quot; name=&quot;Mask&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;131&quot; name=&quot;tAdjust&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;132&quot; name=&quot;bAdjust&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;144&quot; name=&quot;Drill_legend&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;150&quot; name=&quot;Notes&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;151&quot; name=&quot;HeatSink&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;152&quot; name=&quot;_bDocu&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;153&quot; name=&quot;FabDoc1&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;154&quot; name=&quot;FabDoc2&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;155&quot; name=&quot;FabDoc3&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;199&quot; name=&quot;Contour&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;200&quot; name=&quot;200bmp&quot; color=&quot;1&quot; fill=&quot;10&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;201&quot; name=&quot;201bmp&quot; color=&quot;2&quot; fill=&quot;10&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;202&quot; name=&quot;202bmp&quot; color=&quot;3&quot; fill=&quot;10&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;203&quot; name=&quot;203bmp&quot; color=&quot;4&quot; fill=&quot;10&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;204&quot; name=&quot;204bmp&quot; color=&quot;5&quot; fill=&quot;10&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;205&quot; name=&quot;205bmp&quot; color=&quot;6&quot; fill=&quot;10&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;206&quot; name=&quot;206bmp&quot; color=&quot;7&quot; fill=&quot;10&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;207&quot; name=&quot;207bmp&quot; color=&quot;8&quot; fill=&quot;10&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;208&quot; name=&quot;208bmp&quot; color=&quot;9&quot; fill=&quot;10&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;209&quot; name=&quot;209bmp&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;210&quot; name=&quot;210bmp&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;211&quot; name=&quot;211bmp&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;212&quot; name=&quot;212bmp&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;213&quot; name=&quot;213bmp&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;214&quot; name=&quot;214bmp&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;215&quot; name=&quot;215bmp&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;216&quot; name=&quot;216bmp&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;217&quot; name=&quot;217bmp&quot; color=&quot;18&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;218&quot; name=&quot;218bmp&quot; color=&quot;19&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;219&quot; name=&quot;219bmp&quot; color=&quot;20&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;220&quot; name=&quot;220bmp&quot; color=&quot;21&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;221&quot; name=&quot;221bmp&quot; color=&quot;22&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;222&quot; name=&quot;222bmp&quot; color=&quot;23&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;223&quot; name=&quot;223bmp&quot; color=&quot;24&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;224&quot; name=&quot;224bmp&quot; color=&quot;25&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;225&quot; name=&quot;225bmp&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;226&quot; name=&quot;226bmp&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;227&quot; name=&quot;227bmp&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;228&quot; name=&quot;228bmp&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;229&quot; name=&quot;229bmp&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;230&quot; name=&quot;230bmp&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;231&quot; name=&quot;231bmp&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;232&quot; name=&quot;Eagle3D_PG2&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;233&quot; name=&quot;Eagle3D_PG3&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;248&quot; name=&quot;Housing&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;249&quot; name=&quot;Edge&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;250&quot; name=&quot;Descript&quot; color=&quot;3&quot; fill=&quot;1&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;251&quot; name=&quot;SMDround&quot; color=&quot;12&quot; fill=&quot;11&quot; visible=&quot;no&quot; active=&quot;no&quot;/&gt;
&lt;layer number=&quot;254&quot; name=&quot;cooling&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;layer number=&quot;255&quot; name=&quot;routoute&quot; color=&quot;7&quot; fill=&quot;1&quot; visible=&quot;yes&quot; active=&quot;yes&quot;/&gt;
&lt;/layers&gt;
&lt;schematic xreflabel=&quot;%F%N/%S.%C%R&quot; xrefpart=&quot;/%S.%C%R&quot;&gt;
&lt;libraries&gt;
&lt;library name=&quot;Sunstang2018Library&quot;&gt;
&lt;packages&gt;
&lt;package name=&quot;HC49US&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;HC49/US 11.6x4.6mm PTH Crystal&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;&amp;lt;a href=&quot;https://www.digikey.com/Web%20Export/Supplier%20Content/Citizen_300/PDF/Citizen_HC49US.pdf?redirected=1&quot;&amp;gt;Example Datasheet&amp;lt;/a&amp;gt;&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;wire x1=&quot;-3.429&quot; y1=&quot;-2.286&quot; x2=&quot;3.429&quot; y2=&quot;-2.286&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3.429&quot; y1=&quot;2.286&quot; x2=&quot;-3.429&quot; y2=&quot;2.286&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3.429&quot; y1=&quot;2.286&quot; x2=&quot;3.429&quot; y2=&quot;-2.286&quot; width=&quot;0.2032&quot; layer=&quot;21&quot; curve=&quot;-180&quot;/&gt;
&lt;wire x1=&quot;-3.429&quot; y1=&quot;2.286&quot; x2=&quot;-3.429&quot; y2=&quot;-2.286&quot; width=&quot;0.2032&quot; layer=&quot;21&quot; curve=&quot;180&quot;/&gt;
&lt;pad name=&quot;1&quot; x=&quot;-2.54&quot; y=&quot;0&quot; drill=&quot;0.7&quot; diameter=&quot;1.651&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;2&quot; x=&quot;2.54&quot; y=&quot;0&quot; drill=&quot;0.7&quot; diameter=&quot;1.651&quot; rot=&quot;R90&quot;/&gt;
&lt;text x=&quot;0&quot; y=&quot;2.54&quot; size=&quot;0.6096&quot; layer=&quot;25&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;bottom-center&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;0&quot; y=&quot;-2.54&quot; size=&quot;0.6096&quot; layer=&quot;27&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;top-center&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;/package&gt;
&lt;package name=&quot;CAP-PTH-2.54&quot;&gt;
&lt;description&gt;2 PTH spaced 0.1&quot; apart&lt;/description&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;0.635&quot; x2=&quot;0&quot; y2=&quot;-0.635&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;pad name=&quot;1&quot; x=&quot;-1.27&quot; y=&quot;0&quot; drill=&quot;0.7&quot; diameter=&quot;1.651&quot;/&gt;
&lt;pad name=&quot;2&quot; x=&quot;1.27&quot; y=&quot;0&quot; drill=&quot;0.7&quot; diameter=&quot;1.651&quot;/&gt;
&lt;text x=&quot;0&quot; y=&quot;1.016&quot; size=&quot;0.6096&quot; layer=&quot;25&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;bottom-center&quot;&gt;&amp;gt;Name&lt;/text&gt;
&lt;text x=&quot;0&quot; y=&quot;-1.016&quot; size=&quot;0.6096&quot; layer=&quot;27&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;top-center&quot;&gt;&amp;gt;Value&lt;/text&gt;
&lt;/package&gt;
&lt;package name=&quot;78XXL&quot;&gt;
&lt;description&gt;&amp;lt;b&amp;gt;VOLTAGE REGULATOR&amp;lt;/b&amp;gt;&lt;/description&gt;
&lt;wire x1=&quot;-5.207&quot; y1=&quot;-1.27&quot; x2=&quot;5.207&quot; y2=&quot;-1.27&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;5.207&quot; y1=&quot;14.605&quot; x2=&quot;-5.207&quot; y2=&quot;14.605&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;5.207&quot; y1=&quot;-1.27&quot; x2=&quot;5.207&quot; y2=&quot;11.176&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;5.207&quot; y1=&quot;11.176&quot; x2=&quot;4.318&quot; y2=&quot;11.176&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;4.318&quot; y1=&quot;11.176&quot; x2=&quot;4.318&quot; y2=&quot;12.7&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;4.318&quot; y1=&quot;12.7&quot; x2=&quot;5.207&quot; y2=&quot;12.7&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;5.207&quot; y1=&quot;12.7&quot; x2=&quot;5.207&quot; y2=&quot;14.605&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-5.207&quot; y1=&quot;-1.27&quot; x2=&quot;-5.207&quot; y2=&quot;11.176&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-5.207&quot; y1=&quot;11.176&quot; x2=&quot;-4.318&quot; y2=&quot;11.176&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-4.318&quot; y1=&quot;11.176&quot; x2=&quot;-4.318&quot; y2=&quot;12.7&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-4.318&quot; y1=&quot;12.7&quot; x2=&quot;-5.207&quot; y2=&quot;12.7&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-5.207&quot; y1=&quot;12.7&quot; x2=&quot;-5.207&quot; y2=&quot;14.605&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-4.572&quot; y1=&quot;-0.635&quot; x2=&quot;4.572&quot; y2=&quot;-0.635&quot; width=&quot;0.0508&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;4.572&quot; y1=&quot;7.62&quot; x2=&quot;4.572&quot; y2=&quot;-0.635&quot; width=&quot;0.0508&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;4.572&quot; y1=&quot;7.62&quot; x2=&quot;-4.572&quot; y2=&quot;7.62&quot; width=&quot;0.0508&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-4.572&quot; y1=&quot;-0.635&quot; x2=&quot;-4.572&quot; y2=&quot;7.62&quot; width=&quot;0.0508&quot; layer=&quot;21&quot;/&gt;
&lt;circle x=&quot;0&quot; y=&quot;11.176&quot; radius=&quot;1.8034&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;circle x=&quot;0&quot; y=&quot;11.176&quot; radius=&quot;4.191&quot; width=&quot;0&quot; layer=&quot;42&quot;/&gt;
&lt;circle x=&quot;0&quot; y=&quot;11.176&quot; radius=&quot;4.191&quot; width=&quot;0&quot; layer=&quot;43&quot;/&gt;
&lt;pad name=&quot;IN&quot; x=&quot;-2.54&quot; y=&quot;-3.81&quot; drill=&quot;1.016&quot; shape=&quot;long&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;GND&quot; x=&quot;0&quot; y=&quot;-3.81&quot; drill=&quot;1.016&quot; shape=&quot;long&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;OUT&quot; x=&quot;2.54&quot; y=&quot;-3.81&quot; drill=&quot;1.016&quot; shape=&quot;long&quot; rot=&quot;R90&quot;/&gt;
&lt;text x=&quot;-3.81&quot; y=&quot;5.08&quot; size=&quot;1.778&quot; layer=&quot;25&quot; ratio=&quot;10&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;-3.937&quot; y=&quot;2.54&quot; size=&quot;1.778&quot; layer=&quot;27&quot; ratio=&quot;10&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;text x=&quot;-4.445&quot; y=&quot;7.874&quot; size=&quot;0.9906&quot; layer=&quot;21&quot; ratio=&quot;10&quot;&gt;A15,2mm&lt;/text&gt;
&lt;text x=&quot;-0.508&quot; y=&quot;0&quot; size=&quot;1.27&quot; layer=&quot;51&quot; ratio=&quot;10&quot;&gt;-&lt;/text&gt;
&lt;text x=&quot;-3.048&quot; y=&quot;0&quot; size=&quot;1.27&quot; layer=&quot;51&quot; ratio=&quot;10&quot;&gt;I&lt;/text&gt;
&lt;text x=&quot;2.032&quot; y=&quot;0&quot; size=&quot;1.27&quot; layer=&quot;51&quot; ratio=&quot;10&quot;&gt;O&lt;/text&gt;
&lt;rectangle x1=&quot;1.905&quot; y1=&quot;-2.159&quot; x2=&quot;3.175&quot; y2=&quot;-1.27&quot; layer=&quot;21&quot;/&gt;
&lt;rectangle x1=&quot;1.905&quot; y1=&quot;-3.81&quot; x2=&quot;3.175&quot; y2=&quot;-2.159&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-0.635&quot; y1=&quot;-2.159&quot; x2=&quot;0.635&quot; y2=&quot;-1.27&quot; layer=&quot;21&quot;/&gt;
&lt;rectangle x1=&quot;-3.175&quot; y1=&quot;-2.159&quot; x2=&quot;-1.905&quot; y2=&quot;-1.27&quot; layer=&quot;21&quot;/&gt;
&lt;rectangle x1=&quot;-0.635&quot; y1=&quot;-3.81&quot; x2=&quot;0.635&quot; y2=&quot;-2.159&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-3.175&quot; y1=&quot;-3.81&quot; x2=&quot;-1.905&quot; y2=&quot;-2.159&quot; layer=&quot;51&quot;/&gt;
&lt;hole x=&quot;0&quot; y=&quot;11.176&quot; drill=&quot;3.302&quot;/&gt;
&lt;/package&gt;
&lt;package name=&quot;TO-220-ALT&quot;&gt;
&lt;wire x1=&quot;-5.207&quot; y1=&quot;-1.27&quot; x2=&quot;5.207&quot; y2=&quot;-1.27&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;5.207&quot; y1=&quot;14.605&quot; x2=&quot;-5.207&quot; y2=&quot;14.605&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;5.207&quot; y1=&quot;-1.27&quot; x2=&quot;5.207&quot; y2=&quot;11.176&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;5.207&quot; y1=&quot;11.176&quot; x2=&quot;4.318&quot; y2=&quot;11.176&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;4.318&quot; y1=&quot;11.176&quot; x2=&quot;4.318&quot; y2=&quot;12.7&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;4.318&quot; y1=&quot;12.7&quot; x2=&quot;5.207&quot; y2=&quot;12.7&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;5.207&quot; y1=&quot;12.7&quot; x2=&quot;5.207&quot; y2=&quot;14.605&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-5.207&quot; y1=&quot;-1.27&quot; x2=&quot;-5.207&quot; y2=&quot;11.176&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-5.207&quot; y1=&quot;11.176&quot; x2=&quot;-4.318&quot; y2=&quot;11.176&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-4.318&quot; y1=&quot;11.176&quot; x2=&quot;-4.318&quot; y2=&quot;12.7&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-4.318&quot; y1=&quot;12.7&quot; x2=&quot;-5.207&quot; y2=&quot;12.7&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-5.207&quot; y1=&quot;12.7&quot; x2=&quot;-5.207&quot; y2=&quot;14.605&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-4.572&quot; y1=&quot;-0.635&quot; x2=&quot;4.572&quot; y2=&quot;-0.635&quot; width=&quot;0.0508&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;4.572&quot; y1=&quot;7.62&quot; x2=&quot;4.572&quot; y2=&quot;-0.635&quot; width=&quot;0.0508&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;4.572&quot; y1=&quot;7.62&quot; x2=&quot;-4.572&quot; y2=&quot;7.62&quot; width=&quot;0.0508&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-4.572&quot; y1=&quot;-0.635&quot; x2=&quot;-4.572&quot; y2=&quot;7.62&quot; width=&quot;0.0508&quot; layer=&quot;21&quot;/&gt;
&lt;circle x=&quot;0&quot; y=&quot;11.176&quot; radius=&quot;1.8034&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;circle x=&quot;0&quot; y=&quot;11.176&quot; radius=&quot;3.048&quot; width=&quot;0&quot; layer=&quot;42&quot;/&gt;
&lt;circle x=&quot;0&quot; y=&quot;11.176&quot; radius=&quot;3.048&quot; width=&quot;0&quot; layer=&quot;43&quot;/&gt;
&lt;pad name=&quot;IN&quot; x=&quot;-2.54&quot; y=&quot;-3.81&quot; drill=&quot;1.016&quot; shape=&quot;long&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;GND&quot; x=&quot;0&quot; y=&quot;-3.81&quot; drill=&quot;1.016&quot; shape=&quot;long&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;OUT&quot; x=&quot;2.54&quot; y=&quot;-3.81&quot; drill=&quot;1.016&quot; shape=&quot;long&quot; rot=&quot;R90&quot;/&gt;
&lt;text x=&quot;-3.81&quot; y=&quot;5.08&quot; size=&quot;1.778&quot; layer=&quot;25&quot; ratio=&quot;10&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;-3.937&quot; y=&quot;2.54&quot; size=&quot;1.778&quot; layer=&quot;27&quot; ratio=&quot;10&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;text x=&quot;-0.508&quot; y=&quot;0&quot; size=&quot;1.27&quot; layer=&quot;51&quot; ratio=&quot;10&quot;&gt;-&lt;/text&gt;
&lt;text x=&quot;-3.048&quot; y=&quot;0&quot; size=&quot;1.27&quot; layer=&quot;51&quot; ratio=&quot;10&quot;&gt;I&lt;/text&gt;
&lt;text x=&quot;2.032&quot; y=&quot;0&quot; size=&quot;1.27&quot; layer=&quot;51&quot; ratio=&quot;10&quot;&gt;O&lt;/text&gt;
&lt;rectangle x1=&quot;1.905&quot; y1=&quot;-2.159&quot; x2=&quot;3.175&quot; y2=&quot;-1.27&quot; layer=&quot;21&quot;/&gt;
&lt;rectangle x1=&quot;1.905&quot; y1=&quot;-3.81&quot; x2=&quot;3.175&quot; y2=&quot;-2.159&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-0.635&quot; y1=&quot;-2.159&quot; x2=&quot;0.635&quot; y2=&quot;-1.27&quot; layer=&quot;21&quot;/&gt;
&lt;rectangle x1=&quot;-3.175&quot; y1=&quot;-2.159&quot; x2=&quot;-1.905&quot; y2=&quot;-1.27&quot; layer=&quot;21&quot;/&gt;
&lt;rectangle x1=&quot;-0.635&quot; y1=&quot;-3.81&quot; x2=&quot;0.635&quot; y2=&quot;-2.159&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-3.175&quot; y1=&quot;-3.81&quot; x2=&quot;-1.905&quot; y2=&quot;-2.159&quot; layer=&quot;51&quot;/&gt;
&lt;hole x=&quot;0&quot; y=&quot;11.176&quot; drill=&quot;3.302&quot;/&gt;
&lt;/package&gt;
&lt;package name=&quot;LED_5MM&quot;&gt;
&lt;description&gt;&amp;lt;B&amp;gt;LED 5mm PTH&amp;lt;/B&amp;gt;&amp;lt;p&amp;gt;
5 mm, round
&amp;lt;p&amp;gt;Specifications:
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;Pin count: 2&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Pin pitch: 0.1inch&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Diameter: 5mm&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;Example device(s):
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;LED-IR-THRU&amp;lt;/li&amp;gt;&lt;/description&gt;
&lt;wire x1=&quot;2.54&quot; y1=&quot;-1.905&quot; x2=&quot;2.54&quot; y2=&quot;1.905&quot; width=&quot;0.2032&quot; layer=&quot;22&quot;/&gt;
&lt;wire x1=&quot;-1.143&quot; y1=&quot;0&quot; x2=&quot;0&quot; y2=&quot;1.143&quot; width=&quot;0.1524&quot; layer=&quot;51&quot; curve=&quot;-90&quot; cap=&quot;flat&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;-1.143&quot; x2=&quot;1.143&quot; y2=&quot;0&quot; width=&quot;0.1524&quot; layer=&quot;51&quot; curve=&quot;90&quot; cap=&quot;flat&quot;/&gt;
&lt;wire x1=&quot;-1.651&quot; y1=&quot;0&quot; x2=&quot;0&quot; y2=&quot;1.651&quot; width=&quot;0.1524&quot; layer=&quot;51&quot; curve=&quot;-90&quot; cap=&quot;flat&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;-1.651&quot; x2=&quot;1.651&quot; y2=&quot;0&quot; width=&quot;0.1524&quot; layer=&quot;51&quot; curve=&quot;90&quot; cap=&quot;flat&quot;/&gt;
&lt;wire x1=&quot;-2.159&quot; y1=&quot;0&quot; x2=&quot;0&quot; y2=&quot;2.159&quot; width=&quot;0.1524&quot; layer=&quot;51&quot; curve=&quot;-90&quot; cap=&quot;flat&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;-2.159&quot; x2=&quot;2.159&quot; y2=&quot;0&quot; width=&quot;0.1524&quot; layer=&quot;51&quot; curve=&quot;90&quot; cap=&quot;flat&quot;/&gt;
&lt;pad name=&quot;A&quot; x=&quot;-1.27&quot; y=&quot;0&quot; drill=&quot;0.8128&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;pad name=&quot;K&quot; x=&quot;1.27&quot; y=&quot;0&quot; drill=&quot;0.8128&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;text x=&quot;0&quot; y=&quot;3.3909&quot; size=&quot;0.6096&quot; layer=&quot;25&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;bottom-center&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;0.0254&quot; y=&quot;-3.3909&quot; size=&quot;0.6096&quot; layer=&quot;27&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;top-center&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;wire x1=&quot;2.54&quot; y1=&quot;-1.905&quot; x2=&quot;2.54&quot; y2=&quot;1.905&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;2.54&quot; y1=&quot;-1.905&quot; x2=&quot;2.54&quot; y2=&quot;1.905&quot; width=&quot;0.254&quot; layer=&quot;21&quot; curve=&quot;-286.260205&quot; cap=&quot;flat&quot;/&gt;
&lt;circle x=&quot;0&quot; y=&quot;0&quot; radius=&quot;2.54&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;2.54&quot; y1=&quot;-1.905&quot; x2=&quot;2.54&quot; y2=&quot;1.905&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;/package&gt;
&lt;package name=&quot;LED_3MM&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;LED 3MM PTH&amp;lt;/h3&amp;gt;

3 mm, round.

&amp;lt;p&amp;gt;Specifications:
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;Pin count: 2&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Pin pitch: 0.1inch&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Diameter: 3mm&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;Example device(s):
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;LED&amp;lt;/li&amp;gt;&amp;lt;/ul&amp;gt;&lt;/description&gt;
&lt;wire x1=&quot;1.5748&quot; y1=&quot;-1.27&quot; x2=&quot;1.5748&quot; y2=&quot;1.27&quot; width=&quot;0.254&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;2.032&quot; x2=&quot;1.561&quot; y2=&quot;1.3009&quot; width=&quot;0.254&quot; layer=&quot;22&quot; curve=&quot;-50.193108&quot; cap=&quot;flat&quot;/&gt;
&lt;wire x1=&quot;-1.7929&quot; y1=&quot;0.9562&quot; x2=&quot;0&quot; y2=&quot;2.032&quot; width=&quot;0.254&quot; layer=&quot;22&quot; curve=&quot;-61.926949&quot; cap=&quot;flat&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;-2.032&quot; x2=&quot;1.5512&quot; y2=&quot;-1.3126&quot; width=&quot;0.254&quot; layer=&quot;22&quot; curve=&quot;49.763022&quot; cap=&quot;flat&quot;/&gt;
&lt;wire x1=&quot;-1.7643&quot; y1=&quot;-1.0082&quot; x2=&quot;0&quot; y2=&quot;-2.032&quot; width=&quot;0.254&quot; layer=&quot;22&quot; curve=&quot;60.255215&quot; cap=&quot;flat&quot;/&gt;
&lt;wire x1=&quot;-2.032&quot; y1=&quot;0&quot; x2=&quot;-1.7891&quot; y2=&quot;0.9634&quot; width=&quot;0.254&quot; layer=&quot;51&quot; curve=&quot;-28.301701&quot; cap=&quot;flat&quot;/&gt;
&lt;wire x1=&quot;-2.032&quot; y1=&quot;0&quot; x2=&quot;-1.7306&quot; y2=&quot;-1.065&quot; width=&quot;0.254&quot; layer=&quot;51&quot; curve=&quot;31.60822&quot; cap=&quot;flat&quot;/&gt;
&lt;wire x1=&quot;1.5748&quot; y1=&quot;1.2954&quot; x2=&quot;1.5748&quot; y2=&quot;0.7874&quot; width=&quot;0.254&quot; layer=&quot;22&quot;/&gt;
&lt;wire x1=&quot;1.5748&quot; y1=&quot;-1.2954&quot; x2=&quot;1.5748&quot; y2=&quot;-0.8382&quot; width=&quot;0.254&quot; layer=&quot;22&quot;/&gt;
&lt;pad name=&quot;A&quot; x=&quot;-1.27&quot; y=&quot;0&quot; drill=&quot;0.8128&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;pad name=&quot;K&quot; x=&quot;1.27&quot; y=&quot;0&quot; drill=&quot;0.8128&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;text x=&quot;0&quot; y=&quot;2.286&quot; size=&quot;0.6096&quot; layer=&quot;25&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;bottom-center&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;0&quot; y=&quot;-2.286&quot; size=&quot;0.6096&quot; layer=&quot;27&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;top-center&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;2.032&quot; x2=&quot;1.561&quot; y2=&quot;1.3009&quot; width=&quot;0.254&quot; layer=&quot;21&quot; curve=&quot;-50.193108&quot; cap=&quot;flat&quot;/&gt;
&lt;wire x1=&quot;-1.7929&quot; y1=&quot;0.9562&quot; x2=&quot;0&quot; y2=&quot;2.032&quot; width=&quot;0.254&quot; layer=&quot;21&quot; curve=&quot;-61.926949&quot; cap=&quot;flat&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;-2.032&quot; x2=&quot;1.5512&quot; y2=&quot;-1.3126&quot; width=&quot;0.254&quot; layer=&quot;21&quot; curve=&quot;49.763022&quot; cap=&quot;flat&quot;/&gt;
&lt;wire x1=&quot;-1.7643&quot; y1=&quot;-1.0082&quot; x2=&quot;0&quot; y2=&quot;-2.032&quot; width=&quot;0.254&quot; layer=&quot;21&quot; curve=&quot;60.255215&quot; cap=&quot;flat&quot;/&gt;
&lt;wire x1=&quot;1.5748&quot; y1=&quot;1.2954&quot; x2=&quot;1.5748&quot; y2=&quot;0.7874&quot; width=&quot;0.254&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.5748&quot; y1=&quot;-1.2954&quot; x2=&quot;1.5748&quot; y2=&quot;-0.8382&quot; width=&quot;0.254&quot; layer=&quot;21&quot;/&gt;
&lt;/package&gt;
&lt;package name=&quot;LED_10MM&quot;&gt;
&lt;description&gt;&amp;lt;B&amp;gt;LED 10mm PTH&amp;lt;/B&amp;gt;&amp;lt;p&amp;gt;
10 mm, round
&amp;lt;p&amp;gt;Specifications:
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;Pin count: 2&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Pin pitch: 0.2inch&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Diameter: 10mm&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;Example device(s):
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;LED&amp;lt;/li&amp;gt;&lt;/description&gt;
&lt;wire x1=&quot;-5&quot; y1=&quot;-2&quot; x2=&quot;-5&quot; y2=&quot;2&quot; width=&quot;0.2032&quot; layer=&quot;21&quot; curve=&quot;316.862624&quot;/&gt;
&lt;wire x1=&quot;-5&quot; y1=&quot;2&quot; x2=&quot;-5&quot; y2=&quot;-2&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;pad name=&quot;A&quot; x=&quot;2.54&quot; y=&quot;0&quot; drill=&quot;2.4&quot; diameter=&quot;3.7&quot;/&gt;
&lt;pad name=&quot;C&quot; x=&quot;-2.54&quot; y=&quot;0&quot; drill=&quot;2.4&quot; diameter=&quot;3.7&quot;/&gt;
&lt;text x=&quot;2.159&quot; y=&quot;2.54&quot; size=&quot;1.016&quot; layer=&quot;51&quot; ratio=&quot;15&quot;&gt;L&lt;/text&gt;
&lt;text x=&quot;-2.921&quot; y=&quot;2.54&quot; size=&quot;1.016&quot; layer=&quot;51&quot; ratio=&quot;15&quot;&gt;S&lt;/text&gt;
&lt;wire x1=&quot;-5&quot; y1=&quot;2&quot; x2=&quot;-5&quot; y2=&quot;-2&quot; width=&quot;0.2032&quot; layer=&quot;22&quot;/&gt;
&lt;text x=&quot;0&quot; y=&quot;5.715&quot; size=&quot;0.6096&quot; layer=&quot;25&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;bottom-center&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;0&quot; y=&quot;-5.715&quot; size=&quot;0.6096&quot; layer=&quot;27&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;top-center&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;wire x1=&quot;-5&quot; y1=&quot;2&quot; x2=&quot;-5&quot; y2=&quot;-2&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;/package&gt;
&lt;package name=&quot;AXIAL-0.3&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;AXIAL-0.3&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;Commonly used for 1/4W through-hole resistors. 0.3&quot; pitch between holes.&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;0.762&quot; x2=&quot;2.54&quot; y2=&quot;0.762&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;2.54&quot; y1=&quot;0.762&quot; x2=&quot;2.54&quot; y2=&quot;0&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;2.54&quot; y1=&quot;0&quot; x2=&quot;2.54&quot; y2=&quot;-0.762&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;2.54&quot; y1=&quot;-0.762&quot; x2=&quot;-2.54&quot; y2=&quot;-0.762&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;-0.762&quot; x2=&quot;-2.54&quot; y2=&quot;0&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;0&quot; x2=&quot;-2.54&quot; y2=&quot;0.762&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;2.54&quot; y1=&quot;0&quot; x2=&quot;2.794&quot; y2=&quot;0&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;0&quot; x2=&quot;-2.794&quot; y2=&quot;0&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;pad name=&quot;P$1&quot; x=&quot;-3.81&quot; y=&quot;0&quot; drill=&quot;0.9&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;pad name=&quot;P$2&quot; x=&quot;3.81&quot; y=&quot;0&quot; drill=&quot;0.9&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;text x=&quot;0&quot; y=&quot;1.016&quot; size=&quot;0.6096&quot; layer=&quot;25&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;bottom-center&quot;&gt;&amp;gt;Name&lt;/text&gt;
&lt;text x=&quot;0&quot; y=&quot;-1.016&quot; size=&quot;0.6096&quot; layer=&quot;27&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;top-center&quot;&gt;&amp;gt;Value&lt;/text&gt;
&lt;/package&gt;
&lt;package name=&quot;CPOL-RADIAL-2.5MM-5MM&quot;&gt;
&lt;description&gt;2.5 mm spaced PTHs with 5 mm diameter outline and standard solder mask&lt;/description&gt;
&lt;pad name=&quot;1&quot; x=&quot;1.25&quot; y=&quot;0&quot; drill=&quot;0.7&quot; diameter=&quot;1.651&quot; shape=&quot;square&quot;/&gt;
&lt;pad name=&quot;2&quot; x=&quot;-1.25&quot; y=&quot;0&quot; drill=&quot;0.7&quot; diameter=&quot;1.651&quot;/&gt;
&lt;circle x=&quot;0&quot; y=&quot;0&quot; radius=&quot;2.5&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;text x=&quot;0&quot; y=&quot;2.667&quot; size=&quot;0.6096&quot; layer=&quot;25&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;bottom-center&quot;&gt;&amp;gt;Name&lt;/text&gt;
&lt;text x=&quot;0&quot; y=&quot;-2.667&quot; size=&quot;0.6096&quot; layer=&quot;27&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;top-center&quot;&gt;&amp;gt;Value&lt;/text&gt;
&lt;wire x1=&quot;-0.742&quot; y1=&quot;1.397&quot; x2=&quot;-1.758&quot; y2=&quot;1.397&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.758&quot; y1=&quot;1.397&quot; x2=&quot;0.742&quot; y2=&quot;1.397&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.25&quot; y1=&quot;1.905&quot; x2=&quot;1.25&quot; y2=&quot;0.889&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;/package&gt;
&lt;package name=&quot;2X3-SHROUDED&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Plated Through Hole - 2x3 Shrouded Header&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;Specifications:
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;Pin count:6&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Pin pitch:0.1&quot;&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;&amp;lt;a href=”https://www.sparkfun.com/datasheets/Prototyping/Shrouded-10pin.pdf”&amp;gt;Datasheet referenced for footprint&amp;lt;/a&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;Example device(s):
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;CONN_03x2&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;wire x1=&quot;4.5&quot; y1=&quot;7.56&quot; x2=&quot;4.5&quot; y2=&quot;-7.56&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-4.5&quot; y1=&quot;-7.56&quot; x2=&quot;-4.5&quot; y2=&quot;-2.2&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-4.5&quot; y1=&quot;-2.2&quot; x2=&quot;-4.5&quot; y2=&quot;2.2&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-4.5&quot; y1=&quot;2.2&quot; x2=&quot;-4.5&quot; y2=&quot;7.56&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-4.5&quot; y1=&quot;7.56&quot; x2=&quot;4.4&quot; y2=&quot;7.56&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;4.5&quot; y1=&quot;-7.56&quot; x2=&quot;-4.5&quot; y2=&quot;-7.56&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-3.4&quot; y1=&quot;6.46&quot; x2=&quot;3.4&quot; y2=&quot;6.46&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;3.4&quot; y1=&quot;6.46&quot; x2=&quot;3.4&quot; y2=&quot;-6.46&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-3.4&quot; y1=&quot;-6.46&quot; x2=&quot;3.4&quot; y2=&quot;-6.46&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-4.5&quot; y1=&quot;2.2&quot; x2=&quot;-3&quot; y2=&quot;2.2&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-3&quot; y1=&quot;2.2&quot; x2=&quot;-3&quot; y2=&quot;-2.2&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-3&quot; y1=&quot;-2.2&quot; x2=&quot;-4.5&quot; y2=&quot;-2.2&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-3.4&quot; y1=&quot;6.46&quot; x2=&quot;-3.4&quot; y2=&quot;2.2&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-3.4&quot; y1=&quot;-6.46&quot; x2=&quot;-3.4&quot; y2=&quot;-2.2&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;pad name=&quot;1&quot; x=&quot;-1.27&quot; y=&quot;2.54&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;pad name=&quot;2&quot; x=&quot;1.27&quot; y=&quot;2.54&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;pad name=&quot;3&quot; x=&quot;-1.27&quot; y=&quot;0&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;pad name=&quot;4&quot; x=&quot;1.27&quot; y=&quot;0&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;pad name=&quot;5&quot; x=&quot;-1.27&quot; y=&quot;-2.54&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;pad name=&quot;6&quot; x=&quot;1.27&quot; y=&quot;-2.54&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;rectangle x1=&quot;1.016&quot; y1=&quot;2.286&quot; x2=&quot;1.524&quot; y2=&quot;2.794&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.524&quot; y1=&quot;2.286&quot; x2=&quot;-1.016&quot; y2=&quot;2.794&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;1.016&quot; y1=&quot;-0.254&quot; x2=&quot;1.524&quot; y2=&quot;0.254&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.524&quot; y1=&quot;-0.254&quot; x2=&quot;-1.016&quot; y2=&quot;0.254&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;1.016&quot; y1=&quot;-2.794&quot; x2=&quot;1.524&quot; y2=&quot;-2.286&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.524&quot; y1=&quot;-2.794&quot; x2=&quot;-1.016&quot; y2=&quot;-2.286&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.524&quot; y1=&quot;-2.794&quot; x2=&quot;-1.016&quot; y2=&quot;-2.286&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;1.016&quot; y1=&quot;-2.794&quot; x2=&quot;1.524&quot; y2=&quot;-2.286&quot; layer=&quot;51&quot;/&gt;
&lt;text x=&quot;-3.81&quot; y=&quot;7.874&quot; size=&quot;0.6096&quot; layer=&quot;25&quot; font=&quot;vector&quot; ratio=&quot;20&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;-3.81&quot; y=&quot;-8.382&quot; size=&quot;0.6096&quot; layer=&quot;27&quot; font=&quot;vector&quot; ratio=&quot;20&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;wire x1=&quot;-2.648&quot; y1=&quot;3.175&quot; x2=&quot;-2.648&quot; y2=&quot;1.905&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-2.686&quot; y1=&quot;3.175&quot; x2=&quot;-2.686&quot; y2=&quot;1.905&quot; width=&quot;0.2032&quot; layer=&quot;22&quot;/&gt;
&lt;/package&gt;
&lt;package name=&quot;2X3&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Plated Through Hole - 2x3&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;Specifications:
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;Pin count:6&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Pin pitch:0.1&quot;&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;Example device(s):
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;CONN_03x2&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;-0.635&quot; x2=&quot;-0.635&quot; y2=&quot;-1.27&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;0.635&quot; y1=&quot;-1.27&quot; x2=&quot;1.27&quot; y2=&quot;-0.635&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;-0.635&quot; x2=&quot;1.905&quot; y2=&quot;-1.27&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3.175&quot; y1=&quot;-1.27&quot; x2=&quot;3.81&quot; y2=&quot;-0.635&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3.81&quot; y1=&quot;-0.635&quot; x2=&quot;4.445&quot; y2=&quot;-1.27&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;5.715&quot; y1=&quot;-1.27&quot; x2=&quot;6.35&quot; y2=&quot;-0.635&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;-0.635&quot; x2=&quot;-1.27&quot; y2=&quot;3.175&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;3.175&quot; x2=&quot;-0.635&quot; y2=&quot;3.81&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-0.635&quot; y1=&quot;3.81&quot; x2=&quot;0.635&quot; y2=&quot;3.81&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;0.635&quot; y1=&quot;3.81&quot; x2=&quot;1.27&quot; y2=&quot;3.175&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;3.175&quot; x2=&quot;1.905&quot; y2=&quot;3.81&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.905&quot; y1=&quot;3.81&quot; x2=&quot;3.175&quot; y2=&quot;3.81&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3.175&quot; y1=&quot;3.81&quot; x2=&quot;3.81&quot; y2=&quot;3.175&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3.81&quot; y1=&quot;3.175&quot; x2=&quot;4.445&quot; y2=&quot;3.81&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;4.445&quot; y1=&quot;3.81&quot; x2=&quot;5.715&quot; y2=&quot;3.81&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;5.715&quot; y1=&quot;3.81&quot; x2=&quot;6.35&quot; y2=&quot;3.175&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;3.175&quot; x2=&quot;1.27&quot; y2=&quot;-0.635&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3.81&quot; y1=&quot;3.175&quot; x2=&quot;3.81&quot; y2=&quot;-0.635&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;6.35&quot; y1=&quot;3.175&quot; x2=&quot;6.35&quot; y2=&quot;-0.635&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;4.445&quot; y1=&quot;-1.27&quot; x2=&quot;5.715&quot; y2=&quot;-1.27&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.905&quot; y1=&quot;-1.27&quot; x2=&quot;3.175&quot; y2=&quot;-1.27&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-0.635&quot; y1=&quot;-1.27&quot; x2=&quot;0.635&quot; y2=&quot;-1.27&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;0.635&quot; y1=&quot;-1.605&quot; x2=&quot;-0.635&quot; y2=&quot;-1.605&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;pad name=&quot;1&quot; x=&quot;0&quot; y=&quot;0&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;pad name=&quot;2&quot; x=&quot;0&quot; y=&quot;2.54&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;pad name=&quot;3&quot; x=&quot;2.54&quot; y=&quot;0&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;pad name=&quot;4&quot; x=&quot;2.54&quot; y=&quot;2.54&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;pad name=&quot;5&quot; x=&quot;5.08&quot; y=&quot;0&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;pad name=&quot;6&quot; x=&quot;5.08&quot; y=&quot;2.54&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;text x=&quot;-1.27&quot; y=&quot;4.064&quot; size=&quot;0.6096&quot; layer=&quot;25&quot; font=&quot;vector&quot; ratio=&quot;20&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;-1.27&quot; y=&quot;-2.413&quot; size=&quot;0.6096&quot; layer=&quot;27&quot; font=&quot;vector&quot; ratio=&quot;20&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;rectangle x1=&quot;-0.254&quot; y1=&quot;-0.254&quot; x2=&quot;0.254&quot; y2=&quot;0.254&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-0.254&quot; y1=&quot;2.286&quot; x2=&quot;0.254&quot; y2=&quot;2.794&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;2.286&quot; y1=&quot;2.286&quot; x2=&quot;2.794&quot; y2=&quot;2.794&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;2.286&quot; y1=&quot;-0.254&quot; x2=&quot;2.794&quot; y2=&quot;0.254&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;4.826&quot; y1=&quot;2.286&quot; x2=&quot;5.334&quot; y2=&quot;2.794&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;4.826&quot; y1=&quot;-0.254&quot; x2=&quot;5.334&quot; y2=&quot;0.254&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-0.635&quot; y1=&quot;-1.605&quot; x2=&quot;0.635&quot; y2=&quot;-1.605&quot; width=&quot;0.2032&quot; layer=&quot;22&quot;/&gt;
&lt;/package&gt;
&lt;package name=&quot;TACTILE_SWITCH_PTH_6.0MM&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Momentary Switch (Pushbutton) - SPST - PTH, 6.0mm Square&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;Normally-open (NO) SPST momentary switches (buttons, pushbuttons).&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;&amp;lt;a href=&quot;https://www.omron.com/ecb/products/pdf/en-b3f.pdf&quot;&amp;gt;Datasheet&amp;lt;/a&amp;gt; (B3F-1000)&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;wire x1=&quot;3.048&quot; y1=&quot;1.016&quot; x2=&quot;3.048&quot; y2=&quot;2.54&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;3.048&quot; y1=&quot;2.54&quot; x2=&quot;2.54&quot; y2=&quot;3.048&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;2.54&quot; y1=&quot;-3.048&quot; x2=&quot;3.048&quot; y2=&quot;-2.54&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;3.048&quot; y1=&quot;-2.54&quot; x2=&quot;3.048&quot; y2=&quot;-1.016&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;3.048&quot; x2=&quot;-3.048&quot; y2=&quot;2.54&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-3.048&quot; y1=&quot;2.54&quot; x2=&quot;-3.048&quot; y2=&quot;1.016&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;-3.048&quot; x2=&quot;-3.048&quot; y2=&quot;-2.54&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-3.048&quot; y1=&quot;-2.54&quot; x2=&quot;-3.048&quot; y2=&quot;-1.016&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;2.54&quot; y1=&quot;-3.048&quot; x2=&quot;2.159&quot; y2=&quot;-3.048&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;-3.048&quot; x2=&quot;-2.159&quot; y2=&quot;-3.048&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;3.048&quot; x2=&quot;-2.159&quot; y2=&quot;3.048&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;2.54&quot; y1=&quot;3.048&quot; x2=&quot;2.159&quot; y2=&quot;3.048&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;2.159&quot; y1=&quot;3.048&quot; x2=&quot;-2.159&quot; y2=&quot;3.048&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-2.159&quot; y1=&quot;-3.048&quot; x2=&quot;2.159&quot; y2=&quot;-3.048&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3.048&quot; y1=&quot;0.998&quot; x2=&quot;3.048&quot; y2=&quot;-1.016&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-3.048&quot; y1=&quot;1.028&quot; x2=&quot;-3.048&quot; y2=&quot;-1.016&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;1.27&quot; x2=&quot;-2.54&quot; y2=&quot;0.508&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;-0.508&quot; x2=&quot;-2.54&quot; y2=&quot;-1.27&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;0.508&quot; x2=&quot;-2.159&quot; y2=&quot;-0.381&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;circle x=&quot;0&quot; y=&quot;0&quot; radius=&quot;1.778&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;pad name=&quot;1&quot; x=&quot;-3.2512&quot; y=&quot;2.2606&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;pad name=&quot;2&quot; x=&quot;3.2512&quot; y=&quot;2.2606&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;pad name=&quot;3&quot; x=&quot;-3.2512&quot; y=&quot;-2.2606&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;pad name=&quot;4&quot; x=&quot;3.2512&quot; y=&quot;-2.2606&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;text x=&quot;0&quot; y=&quot;3.302&quot; size=&quot;0.6096&quot; layer=&quot;25&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;bottom-center&quot;&gt;&amp;gt;Name&lt;/text&gt;
&lt;text x=&quot;0&quot; y=&quot;-3.175&quot; size=&quot;0.6096&quot; layer=&quot;27&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;top-center&quot;&gt;&amp;gt;Value&lt;/text&gt;
&lt;/package&gt;
&lt;package name=&quot;DUMMY&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Dummy Footprint&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;NOTHING HERE!!! For when you want a symbol with no package as an option against symbols with a package.&amp;lt;/p&amp;gt;

&amp;lt;p&amp;gt;Devices using:
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;BADGERHACK_LOGO&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;FRAME-LETTER&amp;lt;/li&amp;gt;&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;/package&gt;
&lt;package name=&quot;SOT23&quot;&gt;
&lt;smd name=&quot;1&quot; x=&quot;-0.95&quot; y=&quot;-0.9&quot; dx=&quot;0.43&quot; dy=&quot;0.5&quot; layer=&quot;1&quot;/&gt;
&lt;smd name=&quot;2&quot; x=&quot;0.95&quot; y=&quot;-0.9&quot; dx=&quot;0.43&quot; dy=&quot;0.5&quot; layer=&quot;1&quot;/&gt;
&lt;smd name=&quot;3&quot; x=&quot;0&quot; y=&quot;0.9&quot; dx=&quot;0.43&quot; dy=&quot;0.5&quot; layer=&quot;1&quot;/&gt;
&lt;circle x=&quot;-1.1&quot; y=&quot;-0.8&quot; radius=&quot;0.05&quot; width=&quot;0&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-1.45&quot; y1=&quot;-0.65&quot; x2=&quot;1.45&quot; y2=&quot;-0.65&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;1.45&quot; y1=&quot;-0.65&quot; x2=&quot;1.45&quot; y2=&quot;0.65&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;1.45&quot; y1=&quot;0.65&quot; x2=&quot;-1.45&quot; y2=&quot;0.65&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.45&quot; y1=&quot;0.65&quot; x2=&quot;-1.45&quot; y2=&quot;-0.65&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.45&quot; y1=&quot;0.65&quot; x2=&quot;-1.45&quot; y2=&quot;-0.65&quot; width=&quot;0.127&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.45&quot; y1=&quot;0.65&quot; x2=&quot;1.45&quot; y2=&quot;-0.65&quot; width=&quot;0.127&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-0.45&quot; y1=&quot;-0.65&quot; x2=&quot;0.5&quot; y2=&quot;-0.65&quot; width=&quot;0.127&quot; layer=&quot;21&quot;/&gt;
&lt;text x=&quot;-1.65&quot; y=&quot;-1&quot; size=&quot;0.4064&quot; layer=&quot;25&quot; rot=&quot;R90&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;2&quot; y=&quot;-1&quot; size=&quot;0.4064&quot; layer=&quot;27&quot; rot=&quot;R90&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;wire x1=&quot;-0.7112&quot; y1=&quot;-0.6858&quot; x2=&quot;-1.2192&quot; y2=&quot;-0.7112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.2192&quot; y1=&quot;-0.7112&quot; x2=&quot;-1.1938&quot; y2=&quot;-1.2446&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.1938&quot; y1=&quot;-1.2446&quot; x2=&quot;-0.6858&quot; y2=&quot;-1.2446&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-0.6858&quot; y1=&quot;-1.2446&quot; x2=&quot;-0.7112&quot; y2=&quot;-0.6858&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;1.2192&quot; y1=&quot;-0.6858&quot; x2=&quot;0.7112&quot; y2=&quot;-0.7112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;0.7112&quot; y1=&quot;-0.7112&quot; x2=&quot;0.7112&quot; y2=&quot;-1.2446&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;0.7112&quot; y1=&quot;-1.2446&quot; x2=&quot;1.2192&quot; y2=&quot;-1.2446&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;1.2192&quot; y1=&quot;-1.2446&quot; x2=&quot;1.2192&quot; y2=&quot;-0.6858&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-0.254&quot; y1=&quot;0.6858&quot; x2=&quot;0.254&quot; y2=&quot;0.7112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;0.254&quot; y1=&quot;0.7112&quot; x2=&quot;0.254&quot; y2=&quot;1.2446&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;0.254&quot; y1=&quot;1.2446&quot; x2=&quot;-0.254&quot; y2=&quot;1.2446&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-0.254&quot; y1=&quot;1.2446&quot; x2=&quot;-0.254&quot; y2=&quot;0.6858&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.4986&quot; y1=&quot;-0.7112&quot; x2=&quot;1.4986&quot; y2=&quot;-0.7112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;1.4986&quot; y1=&quot;-0.7112&quot; x2=&quot;1.4986&quot; y2=&quot;0.7112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;1.4986&quot; y1=&quot;0.7112&quot; x2=&quot;-1.4986&quot; y2=&quot;0.7112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.4986&quot; y1=&quot;0.7112&quot; x2=&quot;-1.4986&quot; y2=&quot;-0.7112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.1176&quot; y1=&quot;-0.4572&quot; x2=&quot;-1.3716&quot; y2=&quot;-0.4572&quot; width=&quot;0&quot; layer=&quot;51&quot; curve=&quot;-180&quot;/&gt;
&lt;wire x1=&quot;-1.3716&quot; y1=&quot;-0.4572&quot; x2=&quot;-1.1176&quot; y2=&quot;-0.4318&quot; width=&quot;0&quot; layer=&quot;51&quot; curve=&quot;-180&quot;/&gt;
&lt;wire x1=&quot;-0.3302&quot; y1=&quot;-0.8128&quot; x2=&quot;0.3302&quot; y2=&quot;-0.8128&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.6256&quot; y1=&quot;-0.8128&quot; x2=&quot;1.6256&quot; y2=&quot;0.8128&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.6256&quot; y1=&quot;0.8128&quot; x2=&quot;0.6096&quot; y2=&quot;0.8128&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-1.6256&quot; y1=&quot;0.8128&quot; x2=&quot;-1.6256&quot; y2=&quot;-0.8128&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-0.6096&quot; y1=&quot;0.8128&quot; x2=&quot;-1.6256&quot; y2=&quot;0.8128&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-2.6416&quot; y1=&quot;-1.2446&quot; x2=&quot;-2.8956&quot; y2=&quot;-1.2446&quot; width=&quot;0.1524&quot; layer=&quot;21&quot; curve=&quot;-180&quot;/&gt;
&lt;wire x1=&quot;-2.8956&quot; y1=&quot;-1.2446&quot; x2=&quot;-2.6416&quot; y2=&quot;-1.2446&quot; width=&quot;0.1524&quot; layer=&quot;21&quot; curve=&quot;-180&quot;/&gt;
&lt;text x=&quot;-3.2766&quot; y=&quot;-0.635&quot; size=&quot;1.27&quot; layer=&quot;25&quot; ratio=&quot;6&quot; rot=&quot;SR0&quot;&gt;&amp;gt;Name&lt;/text&gt;
&lt;/package&gt;
&lt;package name=&quot;SOT23-M&quot;&gt;
&lt;smd name=&quot;1&quot; x=&quot;-0.9525&quot; y=&quot;-0.996&quot; dx=&quot;0.6096&quot; dy=&quot;1.6256&quot; layer=&quot;1&quot;/&gt;
&lt;smd name=&quot;2&quot; x=&quot;0.9525&quot; y=&quot;-0.996&quot; dx=&quot;0.6096&quot; dy=&quot;1.6256&quot; layer=&quot;1&quot;/&gt;
&lt;smd name=&quot;3&quot; x=&quot;0&quot; y=&quot;0.89805&quot; dx=&quot;0.6096&quot; dy=&quot;1.6256&quot; layer=&quot;1&quot;/&gt;
&lt;wire x1=&quot;-0.7112&quot; y1=&quot;-0.6858&quot; x2=&quot;-1.2192&quot; y2=&quot;-0.7112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.2192&quot; y1=&quot;-0.7112&quot; x2=&quot;-1.1938&quot; y2=&quot;-1.2446&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.1938&quot; y1=&quot;-1.2446&quot; x2=&quot;-0.6858&quot; y2=&quot;-1.2446&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-0.6858&quot; y1=&quot;-1.2446&quot; x2=&quot;-0.7112&quot; y2=&quot;-0.6858&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;1.2192&quot; y1=&quot;-0.6858&quot; x2=&quot;0.7112&quot; y2=&quot;-0.7112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;0.7112&quot; y1=&quot;-0.7112&quot; x2=&quot;0.7112&quot; y2=&quot;-1.2446&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;0.7112&quot; y1=&quot;-1.2446&quot; x2=&quot;1.2192&quot; y2=&quot;-1.2446&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;1.2192&quot; y1=&quot;-1.2446&quot; x2=&quot;1.2192&quot; y2=&quot;-0.6858&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-0.254&quot; y1=&quot;0.6858&quot; x2=&quot;0.254&quot; y2=&quot;0.7112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;0.254&quot; y1=&quot;0.7112&quot; x2=&quot;0.254&quot; y2=&quot;1.2446&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;0.254&quot; y1=&quot;1.2446&quot; x2=&quot;-0.254&quot; y2=&quot;1.2446&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-0.254&quot; y1=&quot;1.2446&quot; x2=&quot;-0.254&quot; y2=&quot;0.6858&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.4986&quot; y1=&quot;-0.7112&quot; x2=&quot;1.4986&quot; y2=&quot;-0.7112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;1.4986&quot; y1=&quot;-0.7112&quot; x2=&quot;1.4986&quot; y2=&quot;0.7112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;1.4986&quot; y1=&quot;0.7112&quot; x2=&quot;-1.4986&quot; y2=&quot;0.7112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.4986&quot; y1=&quot;0.7112&quot; x2=&quot;-1.4986&quot; y2=&quot;-0.7112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.1176&quot; y1=&quot;-0.4572&quot; x2=&quot;-1.3716&quot; y2=&quot;-0.4572&quot; width=&quot;0&quot; layer=&quot;51&quot; curve=&quot;-180&quot;/&gt;
&lt;wire x1=&quot;-1.3716&quot; y1=&quot;-0.4572&quot; x2=&quot;-1.1176&quot; y2=&quot;-0.4318&quot; width=&quot;0&quot; layer=&quot;51&quot; curve=&quot;-180&quot;/&gt;
&lt;wire x1=&quot;-0.3048&quot; y1=&quot;-0.8128&quot; x2=&quot;0.3048&quot; y2=&quot;-0.8128&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.6256&quot; y1=&quot;-0.8128&quot; x2=&quot;1.6256&quot; y2=&quot;0.8128&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.6256&quot; y1=&quot;0.8128&quot; x2=&quot;0.635&quot; y2=&quot;0.8128&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-1.6256&quot; y1=&quot;0.8128&quot; x2=&quot;-1.6256&quot; y2=&quot;-0.8128&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-0.635&quot; y1=&quot;0.8128&quot; x2=&quot;-1.6256&quot; y2=&quot;0.8128&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-2.6416&quot; y1=&quot;-1.2446&quot; x2=&quot;-2.8956&quot; y2=&quot;-1.2446&quot; width=&quot;0.1524&quot; layer=&quot;21&quot; curve=&quot;-180&quot;/&gt;
&lt;wire x1=&quot;-2.8956&quot; y1=&quot;-1.2446&quot; x2=&quot;-2.6416&quot; y2=&quot;-1.2446&quot; width=&quot;0.1524&quot; layer=&quot;21&quot; curve=&quot;-180&quot;/&gt;
&lt;text x=&quot;-3.2766&quot; y=&quot;-0.635&quot; size=&quot;1.27&quot; layer=&quot;25&quot; ratio=&quot;6&quot; rot=&quot;SR0&quot;&gt;&amp;gt;Name&lt;/text&gt;
&lt;/package&gt;
&lt;package name=&quot;SOT23-L&quot;&gt;
&lt;smd name=&quot;1&quot; x=&quot;-0.9525&quot; y=&quot;-0.8944&quot; dx=&quot;0.508&quot; dy=&quot;1.016&quot; layer=&quot;1&quot;/&gt;
&lt;smd name=&quot;2&quot; x=&quot;0.9525&quot; y=&quot;-0.8944&quot; dx=&quot;0.508&quot; dy=&quot;1.016&quot; layer=&quot;1&quot;/&gt;
&lt;smd name=&quot;3&quot; x=&quot;0&quot; y=&quot;0.79645&quot; dx=&quot;0.508&quot; dy=&quot;1.016&quot; layer=&quot;1&quot;/&gt;
&lt;wire x1=&quot;-0.7112&quot; y1=&quot;-0.6858&quot; x2=&quot;-1.2192&quot; y2=&quot;-0.7112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.2192&quot; y1=&quot;-0.7112&quot; x2=&quot;-1.1938&quot; y2=&quot;-1.2446&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.1938&quot; y1=&quot;-1.2446&quot; x2=&quot;-0.6858&quot; y2=&quot;-1.2446&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-0.6858&quot; y1=&quot;-1.2446&quot; x2=&quot;-0.7112&quot; y2=&quot;-0.6858&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;1.2192&quot; y1=&quot;-0.6858&quot; x2=&quot;0.7112&quot; y2=&quot;-0.7112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;0.7112&quot; y1=&quot;-0.7112&quot; x2=&quot;0.7112&quot; y2=&quot;-1.2446&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;0.7112&quot; y1=&quot;-1.2446&quot; x2=&quot;1.2192&quot; y2=&quot;-1.2446&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;1.2192&quot; y1=&quot;-1.2446&quot; x2=&quot;1.2192&quot; y2=&quot;-0.6858&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-0.254&quot; y1=&quot;0.6858&quot; x2=&quot;0.254&quot; y2=&quot;0.7112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;0.254&quot; y1=&quot;0.7112&quot; x2=&quot;0.254&quot; y2=&quot;1.2446&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;0.254&quot; y1=&quot;1.2446&quot; x2=&quot;-0.254&quot; y2=&quot;1.2446&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-0.254&quot; y1=&quot;1.2446&quot; x2=&quot;-0.254&quot; y2=&quot;0.6858&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.4986&quot; y1=&quot;-0.7112&quot; x2=&quot;1.4986&quot; y2=&quot;-0.7112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;1.4986&quot; y1=&quot;-0.7112&quot; x2=&quot;1.4986&quot; y2=&quot;0.7112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;1.4986&quot; y1=&quot;0.7112&quot; x2=&quot;-1.4986&quot; y2=&quot;0.7112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.4986&quot; y1=&quot;0.7112&quot; x2=&quot;-1.4986&quot; y2=&quot;-0.7112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.1176&quot; y1=&quot;-0.4572&quot; x2=&quot;-1.3716&quot; y2=&quot;-0.4572&quot; width=&quot;0&quot; layer=&quot;51&quot; curve=&quot;-180&quot;/&gt;
&lt;wire x1=&quot;-1.3716&quot; y1=&quot;-0.4572&quot; x2=&quot;-1.1176&quot; y2=&quot;-0.4318&quot; width=&quot;0&quot; layer=&quot;51&quot; curve=&quot;-180&quot;/&gt;
&lt;wire x1=&quot;-0.3556&quot; y1=&quot;-0.8128&quot; x2=&quot;0.3556&quot; y2=&quot;-0.8128&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.6256&quot; y1=&quot;-0.8128&quot; x2=&quot;1.6256&quot; y2=&quot;0.8128&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.6256&quot; y1=&quot;0.8128&quot; x2=&quot;0.5842&quot; y2=&quot;0.8128&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-1.6256&quot; y1=&quot;0.8128&quot; x2=&quot;-1.6256&quot; y2=&quot;-0.8128&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-0.5842&quot; y1=&quot;0.8128&quot; x2=&quot;-1.6256&quot; y2=&quot;0.8128&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-2.6416&quot; y1=&quot;-1.2446&quot; x2=&quot;-2.8956&quot; y2=&quot;-1.2446&quot; width=&quot;0.1524&quot; layer=&quot;21&quot; curve=&quot;-180&quot;/&gt;
&lt;wire x1=&quot;-2.8956&quot; y1=&quot;-1.2446&quot; x2=&quot;-2.6416&quot; y2=&quot;-1.2446&quot; width=&quot;0.1524&quot; layer=&quot;21&quot; curve=&quot;-180&quot;/&gt;
&lt;text x=&quot;-3.2766&quot; y=&quot;-0.635&quot; size=&quot;1.27&quot; layer=&quot;25&quot; ratio=&quot;6&quot; rot=&quot;SR0&quot;&gt;&amp;gt;Name&lt;/text&gt;
&lt;/package&gt;
&lt;package name=&quot;DIP18&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Dual In Line Package -18&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;Specifications:
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;Pin count:18&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;Example device(s):
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;MCP2515(MCP2510)&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;pad name=&quot;1&quot; x=&quot;-10.16&quot; y=&quot;-3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;2&quot; x=&quot;-7.62&quot; y=&quot;-3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;3&quot; x=&quot;-5.08&quot; y=&quot;-3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;4&quot; x=&quot;-2.54&quot; y=&quot;-3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;5&quot; x=&quot;0&quot; y=&quot;-3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;6&quot; x=&quot;2.54&quot; y=&quot;-3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;7&quot; x=&quot;5.08&quot; y=&quot;-3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;8&quot; x=&quot;7.62&quot; y=&quot;-3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;9&quot; x=&quot;10.16&quot; y=&quot;-3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;10&quot; x=&quot;10.16&quot; y=&quot;3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;11&quot; x=&quot;7.62&quot; y=&quot;3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;12&quot; x=&quot;5.08&quot; y=&quot;3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;13&quot; x=&quot;2.54&quot; y=&quot;3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;14&quot; x=&quot;0&quot; y=&quot;3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;15&quot; x=&quot;-2.54&quot; y=&quot;3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;16&quot; x=&quot;-5.08&quot; y=&quot;3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;17&quot; x=&quot;-7.62&quot; y=&quot;3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;18&quot; x=&quot;-10.16&quot; y=&quot;3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;wire x1=&quot;11.43&quot; y1=&quot;2.54&quot; x2=&quot;-11.43&quot; y2=&quot;2.54&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-11.43&quot; y1=&quot;-2.54&quot; x2=&quot;11.43&quot; y2=&quot;-2.54&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;11.43&quot; y1=&quot;2.54&quot; x2=&quot;11.43&quot; y2=&quot;-2.54&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-11.43&quot; y1=&quot;2.54&quot; x2=&quot;-11.43&quot; y2=&quot;1.016&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-11.43&quot; y1=&quot;-2.54&quot; x2=&quot;-11.43&quot; y2=&quot;-1.016&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-11.43&quot; y1=&quot;-1.016&quot; x2=&quot;-11.43&quot; y2=&quot;1.016&quot; width=&quot;0.2032&quot; layer=&quot;21&quot; curve=&quot;180&quot;/&gt;
&lt;text x=&quot;-12.065&quot; y=&quot;0&quot; size=&quot;0.6096&quot; layer=&quot;25&quot; font=&quot;vector&quot; ratio=&quot;20&quot; rot=&quot;R90&quot; align=&quot;bottom-center&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;12.7&quot; y=&quot;0&quot; size=&quot;0.6096&quot; layer=&quot;27&quot; font=&quot;vector&quot; ratio=&quot;20&quot; rot=&quot;R90&quot; align=&quot;bottom-center&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;polygon width=&quot;0.127&quot; layer=&quot;21&quot;&gt;
&lt;vertex x=&quot;-12.54125&quot; y=&quot;-3.175&quot; curve=&quot;-90&quot;/&gt;
&lt;vertex x=&quot;-12.065&quot; y=&quot;-2.69875&quot; curve=&quot;-90&quot;/&gt;
&lt;vertex x=&quot;-11.58875&quot; y=&quot;-3.175&quot; curve=&quot;-90&quot;/&gt;
&lt;vertex x=&quot;-12.065&quot; y=&quot;-3.65125&quot; curve=&quot;-90&quot;/&gt;
&lt;/polygon&gt;
&lt;/package&gt;
&lt;package name=&quot;PDIP8_300MC&quot;&gt;
&lt;pad name=&quot;1&quot; x=&quot;-7.62&quot; y=&quot;7.62&quot; drill=&quot;0.9906&quot; diameter=&quot;1.4986&quot; shape=&quot;square&quot;/&gt;
&lt;pad name=&quot;2&quot; x=&quot;-7.62&quot; y=&quot;5.08&quot; drill=&quot;0.9906&quot; diameter=&quot;1.4986&quot;/&gt;
&lt;pad name=&quot;3&quot; x=&quot;-7.62&quot; y=&quot;2.54&quot; drill=&quot;0.9906&quot; diameter=&quot;1.4986&quot;/&gt;
&lt;pad name=&quot;4&quot; x=&quot;-7.62&quot; y=&quot;0&quot; drill=&quot;0.9906&quot; diameter=&quot;1.4986&quot;/&gt;
&lt;pad name=&quot;5&quot; x=&quot;0&quot; y=&quot;0&quot; drill=&quot;0.9906&quot; diameter=&quot;1.4986&quot;/&gt;
&lt;pad name=&quot;6&quot; x=&quot;0&quot; y=&quot;2.54&quot; drill=&quot;0.9906&quot; diameter=&quot;1.4986&quot;/&gt;
&lt;pad name=&quot;7&quot; x=&quot;0&quot; y=&quot;5.08&quot; drill=&quot;0.9906&quot; diameter=&quot;1.4986&quot;/&gt;
&lt;pad name=&quot;8&quot; x=&quot;0&quot; y=&quot;7.62&quot; drill=&quot;0.9906&quot; diameter=&quot;1.4986&quot;/&gt;
&lt;wire x1=&quot;-7.493&quot; y1=&quot;-1.397&quot; x2=&quot;-0.127&quot; y2=&quot;-1.397&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-0.127&quot; y1=&quot;-1.397&quot; x2=&quot;-0.127&quot; y2=&quot;-1.0668&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-0.127&quot; y1=&quot;9.017&quot; x2=&quot;-7.493&quot; y2=&quot;9.017&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-7.493&quot; y1=&quot;9.017&quot; x2=&quot;-7.493&quot; y2=&quot;8.7122&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-7.493&quot; y1=&quot;6.5278&quot; x2=&quot;-7.493&quot; y2=&quot;6.1468&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-7.493&quot; y1=&quot;4.0132&quot; x2=&quot;-7.493&quot; y2=&quot;3.6068&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-7.493&quot; y1=&quot;1.4732&quot; x2=&quot;-7.493&quot; y2=&quot;1.0668&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-7.493&quot; y1=&quot;-1.0668&quot; x2=&quot;-7.493&quot; y2=&quot;-1.397&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-0.127&quot; y1=&quot;1.0668&quot; x2=&quot;-0.127&quot; y2=&quot;1.4732&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-0.127&quot; y1=&quot;3.6068&quot; x2=&quot;-0.127&quot; y2=&quot;4.0132&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-0.127&quot; y1=&quot;6.1468&quot; x2=&quot;-0.127&quot; y2=&quot;6.5532&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-0.127&quot; y1=&quot;8.6868&quot; x2=&quot;-0.127&quot; y2=&quot;9.017&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;text x=&quot;-8.2042&quot; y=&quot;8.4836&quot; size=&quot;1.27&quot; layer=&quot;21&quot; ratio=&quot;6&quot; rot=&quot;SR0&quot;&gt;*&lt;/text&gt;
&lt;wire x1=&quot;-7.366&quot; y1=&quot;7.112&quot; x2=&quot;-7.366&quot; y2=&quot;8.128&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-7.366&quot; y1=&quot;8.128&quot; x2=&quot;-8.128&quot; y2=&quot;8.1026&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-8.128&quot; y1=&quot;8.1026&quot; x2=&quot;-8.1026&quot; y2=&quot;7.112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-8.1026&quot; y1=&quot;7.112&quot; x2=&quot;-7.366&quot; y2=&quot;7.112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-7.366&quot; y1=&quot;4.572&quot; x2=&quot;-7.366&quot; y2=&quot;5.588&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-7.366&quot; y1=&quot;5.588&quot; x2=&quot;-8.128&quot; y2=&quot;5.5626&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-8.128&quot; y1=&quot;5.5626&quot; x2=&quot;-8.1026&quot; y2=&quot;4.572&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-8.1026&quot; y1=&quot;4.572&quot; x2=&quot;-7.366&quot; y2=&quot;4.572&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-7.366&quot; y1=&quot;2.032&quot; x2=&quot;-7.366&quot; y2=&quot;3.048&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-7.366&quot; y1=&quot;3.048&quot; x2=&quot;-8.128&quot; y2=&quot;3.0226&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-8.128&quot; y1=&quot;3.0226&quot; x2=&quot;-8.1026&quot; y2=&quot;2.032&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-8.1026&quot; y1=&quot;2.032&quot; x2=&quot;-7.366&quot; y2=&quot;2.032&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-7.366&quot; y1=&quot;-0.508&quot; x2=&quot;-7.366&quot; y2=&quot;0.508&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-7.366&quot; y1=&quot;0.508&quot; x2=&quot;-8.1026&quot; y2=&quot;0.4826&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-8.1026&quot; y1=&quot;0.4826&quot; x2=&quot;-8.1026&quot; y2=&quot;-0.508&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-8.1026&quot; y1=&quot;-0.508&quot; x2=&quot;-7.366&quot; y2=&quot;-0.508&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-0.254&quot; y1=&quot;0.508&quot; x2=&quot;-0.254&quot; y2=&quot;-0.508&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-0.254&quot; y1=&quot;-0.508&quot; x2=&quot;0.508&quot; y2=&quot;-0.4826&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;0.508&quot; y1=&quot;-0.4826&quot; x2=&quot;0.4826&quot; y2=&quot;0.508&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;0.4826&quot; y1=&quot;0.508&quot; x2=&quot;-0.254&quot; y2=&quot;0.508&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-0.254&quot; y1=&quot;3.048&quot; x2=&quot;-0.254&quot; y2=&quot;2.032&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-0.254&quot; y1=&quot;2.032&quot; x2=&quot;0.508&quot; y2=&quot;2.0574&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;0.508&quot; y1=&quot;2.0574&quot; x2=&quot;0.4826&quot; y2=&quot;3.048&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;0.4826&quot; y1=&quot;3.048&quot; x2=&quot;-0.254&quot; y2=&quot;3.048&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-0.254&quot; y1=&quot;5.588&quot; x2=&quot;-0.254&quot; y2=&quot;4.572&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-0.254&quot; y1=&quot;4.572&quot; x2=&quot;0.4826&quot; y2=&quot;4.5974&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;0.4826&quot; y1=&quot;4.5974&quot; x2=&quot;0.4826&quot; y2=&quot;5.588&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;0.4826&quot; y1=&quot;5.588&quot; x2=&quot;-0.254&quot; y2=&quot;5.588&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-0.254&quot; y1=&quot;8.128&quot; x2=&quot;-0.254&quot; y2=&quot;7.112&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-0.254&quot; y1=&quot;7.112&quot; x2=&quot;0.4826&quot; y2=&quot;7.1374&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;0.4826&quot; y1=&quot;7.1374&quot; x2=&quot;0.4826&quot; y2=&quot;8.128&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;0.4826&quot; y1=&quot;8.128&quot; x2=&quot;-0.254&quot; y2=&quot;8.128&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-7.366&quot; y1=&quot;-1.27&quot; x2=&quot;-0.254&quot; y2=&quot;-1.27&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-0.254&quot; y1=&quot;-1.27&quot; x2=&quot;-0.254&quot; y2=&quot;8.89&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-0.254&quot; y1=&quot;8.89&quot; x2=&quot;-7.366&quot; y2=&quot;8.89&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-7.366&quot; y1=&quot;8.89&quot; x2=&quot;-7.366&quot; y2=&quot;-1.27&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;text x=&quot;-7.6962&quot; y=&quot;6.985&quot; size=&quot;1.27&quot; layer=&quot;51&quot; ratio=&quot;6&quot; rot=&quot;SR0&quot;&gt;*&lt;/text&gt;
&lt;text x=&quot;-7.0866&quot; y=&quot;3.175&quot; size=&quot;1.27&quot; layer=&quot;25&quot; ratio=&quot;6&quot; rot=&quot;SR0&quot;&gt;&amp;gt;Name&lt;/text&gt;
&lt;/package&gt;
&lt;package name=&quot;DIP28&quot;&gt;
&lt;description&gt;Standard 28-pin DIP package.&amp;lt;br&amp;gt;
IC needs to have legs bent before insertion.&lt;/description&gt;
&lt;pad name=&quot;1&quot; x=&quot;-16.51&quot; y=&quot;-3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;2&quot; x=&quot;-13.97&quot; y=&quot;-3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;3&quot; x=&quot;-11.43&quot; y=&quot;-3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;4&quot; x=&quot;-8.89&quot; y=&quot;-3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;5&quot; x=&quot;-6.35&quot; y=&quot;-3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;6&quot; x=&quot;-3.81&quot; y=&quot;-3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;7&quot; x=&quot;-1.27&quot; y=&quot;-3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;8&quot; x=&quot;1.27&quot; y=&quot;-3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;9&quot; x=&quot;3.81&quot; y=&quot;-3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;10&quot; x=&quot;6.35&quot; y=&quot;-3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;11&quot; x=&quot;8.89&quot; y=&quot;-3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;12&quot; x=&quot;11.43&quot; y=&quot;-3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;13&quot; x=&quot;13.97&quot; y=&quot;-3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;14&quot; x=&quot;16.51&quot; y=&quot;-3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;15&quot; x=&quot;16.51&quot; y=&quot;3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;16&quot; x=&quot;13.97&quot; y=&quot;3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;17&quot; x=&quot;11.43&quot; y=&quot;3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;18&quot; x=&quot;8.89&quot; y=&quot;3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;19&quot; x=&quot;6.35&quot; y=&quot;3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;20&quot; x=&quot;3.81&quot; y=&quot;3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;21&quot; x=&quot;1.27&quot; y=&quot;3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;22&quot; x=&quot;-1.27&quot; y=&quot;3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;23&quot; x=&quot;-3.81&quot; y=&quot;3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;24&quot; x=&quot;-6.35&quot; y=&quot;3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;25&quot; x=&quot;-8.89&quot; y=&quot;3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;26&quot; x=&quot;-11.43&quot; y=&quot;3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;27&quot; x=&quot;-13.97&quot; y=&quot;3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;pad name=&quot;28&quot; x=&quot;-16.51&quot; y=&quot;3.81&quot; drill=&quot;0.8128&quot; diameter=&quot;1.6256&quot; rot=&quot;R90&quot;/&gt;
&lt;wire x1=&quot;17.78&quot; y1=&quot;2.54&quot; x2=&quot;-17.78&quot; y2=&quot;2.54&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-17.78&quot; y1=&quot;-2.54&quot; x2=&quot;17.78&quot; y2=&quot;-2.54&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;17.78&quot; y1=&quot;2.54&quot; x2=&quot;17.78&quot; y2=&quot;-2.54&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-17.78&quot; y1=&quot;2.54&quot; x2=&quot;-17.78&quot; y2=&quot;1.016&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-17.78&quot; y1=&quot;-2.54&quot; x2=&quot;-17.78&quot; y2=&quot;-1.016&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-17.78&quot; y1=&quot;-1.016&quot; x2=&quot;-17.78&quot; y2=&quot;1.016&quot; width=&quot;0.2032&quot; layer=&quot;21&quot; curve=&quot;180&quot;/&gt;
&lt;circle x=&quot;-18.415&quot; y=&quot;-3.175&quot; radius=&quot;0.508&quot; width=&quot;0.254&quot; layer=&quot;21&quot;/&gt;
&lt;text x=&quot;-18.415&quot; y=&quot;0&quot; size=&quot;0.6096&quot; layer=&quot;25&quot; font=&quot;vector&quot; ratio=&quot;20&quot; rot=&quot;R90&quot; align=&quot;bottom-center&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;19.05&quot; y=&quot;0&quot; size=&quot;0.6096&quot; layer=&quot;27&quot; font=&quot;vector&quot; ratio=&quot;20&quot; rot=&quot;R90&quot; align=&quot;bottom-center&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;/package&gt;
&lt;package name=&quot;SMT-JUMPER_2_NO_SILK&quot;&gt;
&lt;text x=&quot;0&quot; y=&quot;1.143&quot; size=&quot;0.6096&quot; layer=&quot;25&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;bottom-center&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;0&quot; y=&quot;-1.143&quot; size=&quot;0.6096&quot; layer=&quot;27&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;top-center&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;wire x1=&quot;0.8636&quot; y1=&quot;-1.016&quot; x2=&quot;-0.8636&quot; y2=&quot;-1.016&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;0.8636&quot; y1=&quot;1.016&quot; x2=&quot;1.1176&quot; y2=&quot;0.762&quot; width=&quot;0.1524&quot; layer=&quot;21&quot; curve=&quot;-90&quot;/&gt;
&lt;wire x1=&quot;-1.1176&quot; y1=&quot;0.762&quot; x2=&quot;-0.8636&quot; y2=&quot;1.016&quot; width=&quot;0.1524&quot; layer=&quot;21&quot; curve=&quot;-90&quot;/&gt;
&lt;wire x1=&quot;-1.1176&quot; y1=&quot;-0.762&quot; x2=&quot;-0.8636&quot; y2=&quot;-1.016&quot; width=&quot;0.1524&quot; layer=&quot;21&quot; curve=&quot;90&quot;/&gt;
&lt;wire x1=&quot;0.8636&quot; y1=&quot;-1.016&quot; x2=&quot;1.1176&quot; y2=&quot;-0.762&quot; width=&quot;0.1524&quot; layer=&quot;21&quot; curve=&quot;90&quot;/&gt;
&lt;wire x1=&quot;1.1176&quot; y1=&quot;-0.762&quot; x2=&quot;1.1176&quot; y2=&quot;0.762&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-1.1176&quot; y1=&quot;-0.762&quot; x2=&quot;-1.1176&quot; y2=&quot;0.762&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-0.8636&quot; y1=&quot;1.016&quot; x2=&quot;0.8636&quot; y2=&quot;1.016&quot; width=&quot;0.1524&quot; layer=&quot;21&quot;/&gt;
&lt;smd name=&quot;1&quot; x=&quot;-0.4064&quot; y=&quot;0&quot; dx=&quot;0.635&quot; dy=&quot;1.27&quot; layer=&quot;1&quot; cream=&quot;no&quot;/&gt;
&lt;smd name=&quot;2&quot; x=&quot;0.4064&quot; y=&quot;0&quot; dx=&quot;0.635&quot; dy=&quot;1.27&quot; layer=&quot;1&quot; cream=&quot;no&quot;/&gt;
&lt;/package&gt;
&lt;package name=&quot;2X7-SHROUDED&quot;&gt;
&lt;wire x1=&quot;-2.775&quot; y1=&quot;9.525&quot; x2=&quot;-2.775&quot; y2=&quot;8.255&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;4.5&quot; y1=&quot;13.91&quot; x2=&quot;4.5&quot; y2=&quot;-13.91&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-4.5&quot; y1=&quot;-13.91&quot; x2=&quot;-4.5&quot; y2=&quot;-2.2&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-4.5&quot; y1=&quot;-2.2&quot; x2=&quot;-4.5&quot; y2=&quot;2.2&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-4.5&quot; y1=&quot;2.2&quot; x2=&quot;-4.5&quot; y2=&quot;13.91&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-4.5&quot; y1=&quot;13.91&quot; x2=&quot;4.4&quot; y2=&quot;13.91&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;4.5&quot; y1=&quot;-13.91&quot; x2=&quot;-4.5&quot; y2=&quot;-13.91&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-3.4&quot; y1=&quot;12.81&quot; x2=&quot;3.4&quot; y2=&quot;12.81&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;3.4&quot; y1=&quot;12.81&quot; x2=&quot;3.4&quot; y2=&quot;-12.81&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-3.4&quot; y1=&quot;-12.81&quot; x2=&quot;3.4&quot; y2=&quot;-12.81&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-4.5&quot; y1=&quot;2.2&quot; x2=&quot;-3&quot; y2=&quot;2.2&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-3&quot; y1=&quot;2.2&quot; x2=&quot;-3&quot; y2=&quot;-2.2&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-3&quot; y1=&quot;-2.2&quot; x2=&quot;-4.5&quot; y2=&quot;-2.2&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-3.4&quot; y1=&quot;12.81&quot; x2=&quot;-3.4&quot; y2=&quot;2.2&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-3.4&quot; y1=&quot;-12.81&quot; x2=&quot;-3.4&quot; y2=&quot;-2.2&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;pad name=&quot;1&quot; x=&quot;-1.27&quot; y=&quot;7.62&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;pad name=&quot;2&quot; x=&quot;1.27&quot; y=&quot;7.62&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;pad name=&quot;3&quot; x=&quot;-1.27&quot; y=&quot;5.08&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;pad name=&quot;4&quot; x=&quot;1.27&quot; y=&quot;5.08&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;pad name=&quot;5&quot; x=&quot;-1.27&quot; y=&quot;2.54&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;pad name=&quot;6&quot; x=&quot;1.27&quot; y=&quot;2.54&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;pad name=&quot;7&quot; x=&quot;-1.27&quot; y=&quot;0&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;pad name=&quot;8&quot; x=&quot;1.27&quot; y=&quot;0&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;pad name=&quot;9&quot; x=&quot;-1.27&quot; y=&quot;-2.54&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;pad name=&quot;10&quot; x=&quot;1.27&quot; y=&quot;-2.54&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;wire x1=&quot;-2.813&quot; y1=&quot;9.525&quot; x2=&quot;-2.813&quot; y2=&quot;8.255&quot; width=&quot;0.2032&quot; layer=&quot;22&quot;/&gt;
&lt;pad name=&quot;11&quot; x=&quot;-1.27&quot; y=&quot;-5.08&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;pad name=&quot;12&quot; x=&quot;1.27&quot; y=&quot;-5.08&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;pad name=&quot;13&quot; x=&quot;-1.27&quot; y=&quot;-7.62&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;pad name=&quot;14&quot; x=&quot;1.27&quot; y=&quot;-7.62&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;/package&gt;
&lt;package name=&quot;2010&quot; urn=&quot;urn:adsk.eagle:footprint:39616/1&quot;&gt;
&lt;description&gt;&amp;lt;p&amp;gt;&amp;lt;b&amp;gt;Generic 5025 (2010) package&amp;lt;/b&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;0.2mm courtyard excess rounded to nearest 0.05mm.&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;wire x1=&quot;-1.789&quot; y1=&quot;1.1738&quot; x2=&quot;1.789&quot; y2=&quot;1.1738&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.764&quot; y1=&quot;-1.1738&quot; x2=&quot;1.814&quot; y2=&quot;-1.1738&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-3.3&quot; y1=&quot;1.55&quot; x2=&quot;3.3&quot; y2=&quot;1.55&quot; width=&quot;0.0508&quot; layer=&quot;39&quot;/&gt;
&lt;wire x1=&quot;3.3&quot; y1=&quot;1.55&quot; x2=&quot;3.3&quot; y2=&quot;-1.55&quot; width=&quot;0.0508&quot; layer=&quot;39&quot;/&gt;
&lt;wire x1=&quot;3.3&quot; y1=&quot;-1.55&quot; x2=&quot;-3.3&quot; y2=&quot;-1.55&quot; width=&quot;0.0508&quot; layer=&quot;39&quot;/&gt;
&lt;wire x1=&quot;-3.3&quot; y1=&quot;-1.55&quot; x2=&quot;-3.3&quot; y2=&quot;1.55&quot; width=&quot;0.0508&quot; layer=&quot;39&quot;/&gt;
&lt;smd name=&quot;1&quot; x=&quot;-2.2&quot; y=&quot;0&quot; dx=&quot;1.8&quot; dy=&quot;2.7&quot; layer=&quot;1&quot;/&gt;
&lt;smd name=&quot;2&quot; x=&quot;2.2&quot; y=&quot;0&quot; dx=&quot;1.8&quot; dy=&quot;2.7&quot; layer=&quot;1&quot;/&gt;
&lt;text x=&quot;0&quot; y=&quot;1.651&quot; size=&quot;0.6096&quot; layer=&quot;25&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;bottom-center&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;0&quot; y=&quot;-1.651&quot; size=&quot;0.6096&quot; layer=&quot;27&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;top-center&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;rectangle x1=&quot;-2.5&quot; y1=&quot;-1.25&quot; x2=&quot;-1.6393&quot; y2=&quot;1.25&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;1.651&quot; y1=&quot;-1.25&quot; x2=&quot;2.5&quot; y2=&quot;1.25&quot; layer=&quot;51&quot;/&gt;
&lt;/package&gt;
&lt;package name=&quot;WURTH_ELECTRONICS:61200621721&quot;&gt;
&lt;pad name=&quot;1&quot; x=&quot;-1.27&quot; y=&quot;2.54&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;2&quot; x=&quot;1.27&quot; y=&quot;2.54&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;3&quot; x=&quot;-1.27&quot; y=&quot;0&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;4&quot; x=&quot;1.27&quot; y=&quot;0&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;5&quot; x=&quot;-1.27&quot; y=&quot;-2.54&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;6&quot; x=&quot;1.27&quot; y=&quot;-2.54&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;wire x1=&quot;3&quot; y1=&quot;7.64&quot; x2=&quot;3&quot; y2=&quot;-7.64&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3&quot; y1=&quot;-7.64&quot; x2=&quot;6&quot; y2=&quot;-7.64&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;6&quot; y1=&quot;-7.64&quot; x2=&quot;6&quot; y2=&quot;7.64&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;6&quot; y1=&quot;7.64&quot; x2=&quot;3&quot; y2=&quot;7.64&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;6&quot; y1=&quot;7.64&quot; x2=&quot;11.85&quot; y2=&quot;7.64&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;11.85&quot; y1=&quot;7.64&quot; x2=&quot;11.85&quot; y2=&quot;-7.64&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;11.85&quot; y1=&quot;-7.64&quot; x2=&quot;6&quot; y2=&quot;-7.64&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;5&quot; y1=&quot;2.54&quot; x2=&quot;10&quot; y2=&quot;2.54&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;5&quot; y1=&quot;0&quot; x2=&quot;10&quot; y2=&quot;0&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;5&quot; y1=&quot;-2.54&quot; x2=&quot;10&quot; y2=&quot;-2.54&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;8&quot; y1=&quot;5.08&quot; x2=&quot;8&quot; y2=&quot;-5.08&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;text x=&quot;3&quot; y=&quot;7.9&quot; size=&quot;0.6096&quot; layer=&quot;25&quot; font=&quot;vector&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;3&quot; y=&quot;-8.5&quot; size=&quot;0.6096&quot; layer=&quot;27&quot; font=&quot;vector&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;wire x1=&quot;-2.7&quot; y1=&quot;3.3&quot; x2=&quot;-2.7&quot; y2=&quot;1.6&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;rectangle x1=&quot;-1.59&quot; y1=&quot;-0.32&quot; x2=&quot;-0.95&quot; y2=&quot;0.32&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;0.95&quot; y1=&quot;-0.32&quot; x2=&quot;1.59&quot; y2=&quot;0.32&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.59&quot; y1=&quot;2.22&quot; x2=&quot;-0.95&quot; y2=&quot;2.86&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.59&quot; y1=&quot;-2.86&quot; x2=&quot;-0.95&quot; y2=&quot;-2.22&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;0.95&quot; y1=&quot;-2.86&quot; x2=&quot;1.59&quot; y2=&quot;-2.22&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;0.95&quot; y1=&quot;2.22&quot; x2=&quot;1.59&quot; y2=&quot;2.86&quot; layer=&quot;51&quot;/&gt;
&lt;/package&gt;
&lt;package name=&quot;WURTH_ELECTRONICS:61201421721&quot;&gt;
&lt;pad name=&quot;1&quot; x=&quot;-1.27&quot; y=&quot;7.62&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;2&quot; x=&quot;1.27&quot; y=&quot;7.62&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;3&quot; x=&quot;-1.27&quot; y=&quot;5.08&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;4&quot; x=&quot;1.27&quot; y=&quot;5.08&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;5&quot; x=&quot;-1.27&quot; y=&quot;2.54&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;6&quot; x=&quot;1.27&quot; y=&quot;2.54&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;7&quot; x=&quot;-1.27&quot; y=&quot;0&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;8&quot; x=&quot;1.27&quot; y=&quot;0&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;9&quot; x=&quot;-1.27&quot; y=&quot;-2.54&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;10&quot; x=&quot;1.27&quot; y=&quot;-2.54&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;11&quot; x=&quot;-1.27&quot; y=&quot;-5.08&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;12&quot; x=&quot;1.27&quot; y=&quot;-5.08&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;13&quot; x=&quot;-1.27&quot; y=&quot;-7.62&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;14&quot; x=&quot;1.27&quot; y=&quot;-7.62&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;wire x1=&quot;3&quot; y1=&quot;12.72&quot; x2=&quot;3&quot; y2=&quot;-12.72&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3&quot; y1=&quot;-12.72&quot; x2=&quot;6&quot; y2=&quot;-12.72&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;6&quot; y1=&quot;-12.72&quot; x2=&quot;6&quot; y2=&quot;12.72&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;6&quot; y1=&quot;12.72&quot; x2=&quot;3&quot; y2=&quot;12.72&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-2.8&quot; y1=&quot;8.4&quot; x2=&quot;-2.8&quot; y2=&quot;6.9&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;6&quot; y1=&quot;12.7&quot; x2=&quot;11.85&quot; y2=&quot;12.7&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;11.85&quot; y1=&quot;12.7&quot; x2=&quot;11.85&quot; y2=&quot;-12.72&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;11.85&quot; y1=&quot;-12.72&quot; x2=&quot;6&quot; y2=&quot;-12.72&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;5&quot; y1=&quot;7.62&quot; x2=&quot;10&quot; y2=&quot;7.62&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;5&quot; y1=&quot;5.08&quot; x2=&quot;10&quot; y2=&quot;5.08&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;5&quot; y1=&quot;2.54&quot; x2=&quot;10&quot; y2=&quot;2.54&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;5&quot; y1=&quot;0&quot; x2=&quot;10&quot; y2=&quot;0&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;5&quot; y1=&quot;-2.54&quot; x2=&quot;10&quot; y2=&quot;-2.54&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;5&quot; y1=&quot;-5.08&quot; x2=&quot;10&quot; y2=&quot;-5.08&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;5&quot; y1=&quot;-7.62&quot; x2=&quot;10&quot; y2=&quot;-7.62&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;8.1&quot; y1=&quot;8.9&quot; x2=&quot;8.1&quot; y2=&quot;-9.7&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.59&quot; y1=&quot;7.3&quot; x2=&quot;-0.95&quot; y2=&quot;7.94&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;0.95&quot; y1=&quot;7.3&quot; x2=&quot;1.59&quot; y2=&quot;7.94&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.59&quot; y1=&quot;4.76&quot; x2=&quot;-0.95&quot; y2=&quot;5.4&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;0.95&quot; y1=&quot;4.76&quot; x2=&quot;1.59&quot; y2=&quot;5.4&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.59&quot; y1=&quot;2.22&quot; x2=&quot;-0.95&quot; y2=&quot;2.86&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;0.95&quot; y1=&quot;2.22&quot; x2=&quot;1.59&quot; y2=&quot;2.86&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.59&quot; y1=&quot;-0.32&quot; x2=&quot;-0.95&quot; y2=&quot;0.32&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;0.95&quot; y1=&quot;-0.32&quot; x2=&quot;1.59&quot; y2=&quot;0.32&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.59&quot; y1=&quot;-2.86&quot; x2=&quot;-0.95&quot; y2=&quot;-2.2&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;0.95&quot; y1=&quot;-2.86&quot; x2=&quot;1.59&quot; y2=&quot;-2.22&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.59&quot; y1=&quot;-5.4&quot; x2=&quot;-0.95&quot; y2=&quot;-4.76&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;0.95&quot; y1=&quot;-5.4&quot; x2=&quot;1.59&quot; y2=&quot;-4.76&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.59&quot; y1=&quot;-7.94&quot; x2=&quot;-0.95&quot; y2=&quot;-7.3&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;0.95&quot; y1=&quot;-7.94&quot; x2=&quot;1.59&quot; y2=&quot;-7.3&quot; layer=&quot;51&quot;/&gt;
&lt;text x=&quot;3&quot; y=&quot;13&quot; size=&quot;0.6096&quot; layer=&quot;25&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;3&quot; y=&quot;-13.6&quot; size=&quot;0.6096&quot; layer=&quot;27&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;/package&gt;
&lt;package name=&quot;WURTH_ELECTRONICS:61201421621&quot;&gt;
&lt;pad name=&quot;1&quot; x=&quot;-1.27&quot; y=&quot;7.62&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;2&quot; x=&quot;1.27&quot; y=&quot;7.62&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;3&quot; x=&quot;-1.27&quot; y=&quot;5.08&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;4&quot; x=&quot;1.27&quot; y=&quot;5.08&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;5&quot; x=&quot;-1.27&quot; y=&quot;2.54&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;6&quot; x=&quot;1.27&quot; y=&quot;2.54&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;7&quot; x=&quot;-1.27&quot; y=&quot;0&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;8&quot; x=&quot;1.27&quot; y=&quot;0&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;9&quot; x=&quot;-1.27&quot; y=&quot;-2.54&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;10&quot; x=&quot;1.27&quot; y=&quot;-2.54&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;11&quot; x=&quot;-1.27&quot; y=&quot;-5.08&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;12&quot; x=&quot;1.27&quot; y=&quot;-5.08&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;13&quot; x=&quot;-1.27&quot; y=&quot;-7.62&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;pad name=&quot;14&quot; x=&quot;1.27&quot; y=&quot;-7.62&quot; drill=&quot;1.1&quot; diameter=&quot;2&quot;/&gt;
&lt;wire x1=&quot;-4.425&quot; y1=&quot;12.72&quot; x2=&quot;-4.425&quot; y2=&quot;-12.72&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-4.425&quot; y1=&quot;-12.72&quot; x2=&quot;4.425&quot; y2=&quot;-12.72&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;4.425&quot; y1=&quot;-12.72&quot; x2=&quot;4.425&quot; y2=&quot;12.72&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;4.425&quot; y1=&quot;12.72&quot; x2=&quot;-4.425&quot; y2=&quot;12.72&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3&quot; y1=&quot;2.25&quot; x2=&quot;3&quot; y2=&quot;-2.25&quot; width=&quot;0.127&quot; layer=&quot;48&quot;/&gt;
&lt;wire x1=&quot;3&quot; y1=&quot;2.25&quot; x2=&quot;4.425&quot; y2=&quot;2.25&quot; width=&quot;0.127&quot; layer=&quot;48&quot;/&gt;
&lt;wire x1=&quot;3&quot; y1=&quot;-2.25&quot; x2=&quot;4.425&quot; y2=&quot;-2.25&quot; width=&quot;0.127&quot; layer=&quot;48&quot;/&gt;
&lt;wire x1=&quot;3.425&quot; y1=&quot;-2.25&quot; x2=&quot;3.425&quot; y2=&quot;-11.72&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;3.425&quot; y1=&quot;-11.72&quot; x2=&quot;-3.425&quot; y2=&quot;-11.72&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-3.425&quot; y1=&quot;-11.72&quot; x2=&quot;-3.425&quot; y2=&quot;11.72&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;3.425&quot; y1=&quot;11.72&quot; x2=&quot;3.425&quot; y2=&quot;2.25&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-3.425&quot; y1=&quot;11.72&quot; x2=&quot;3.425&quot; y2=&quot;11.72&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.59&quot; y1=&quot;7.3&quot; x2=&quot;-0.95&quot; y2=&quot;7.94&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;0.95&quot; y1=&quot;7.3&quot; x2=&quot;1.59&quot; y2=&quot;7.94&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.59&quot; y1=&quot;4.76&quot; x2=&quot;-0.95&quot; y2=&quot;5.4&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;0.95&quot; y1=&quot;4.76&quot; x2=&quot;1.59&quot; y2=&quot;5.4&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.59&quot; y1=&quot;2.22&quot; x2=&quot;-0.95&quot; y2=&quot;2.86&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;0.95&quot; y1=&quot;2.22&quot; x2=&quot;1.59&quot; y2=&quot;2.86&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.59&quot; y1=&quot;-0.32&quot; x2=&quot;-0.95&quot; y2=&quot;0.32&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;0.95&quot; y1=&quot;-0.32&quot; x2=&quot;1.59&quot; y2=&quot;0.32&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.59&quot; y1=&quot;-2.86&quot; x2=&quot;-0.95&quot; y2=&quot;-2.22&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;0.95&quot; y1=&quot;-2.86&quot; x2=&quot;1.59&quot; y2=&quot;-2.22&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.59&quot; y1=&quot;-5.4&quot; x2=&quot;-0.95&quot; y2=&quot;-4.76&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;0.95&quot; y1=&quot;-5.4&quot; x2=&quot;1.59&quot; y2=&quot;-4.76&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.59&quot; y1=&quot;-7.94&quot; x2=&quot;-0.95&quot; y2=&quot;-7.3&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;0.95&quot; y1=&quot;-7.96&quot; x2=&quot;1.59&quot; y2=&quot;-7.3&quot; layer=&quot;51&quot;/&gt;
&lt;text x=&quot;-4.4&quot; y=&quot;13.1&quot; size=&quot;0.6096&quot; layer=&quot;25&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;-4.4&quot; y=&quot;-13.7&quot; size=&quot;0.6096&quot; layer=&quot;25&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;wire x1=&quot;-2.9&quot; y1=&quot;8.4&quot; x2=&quot;-2.9&quot; y2=&quot;6.7&quot; width=&quot;0.127&quot; layer=&quot;21&quot;/&gt;
&lt;/package&gt;
&lt;/packages&gt;
&lt;packages3d&gt;
&lt;package3d name=&quot;2010&quot; urn=&quot;urn:adsk.eagle:package:39649/1&quot; type=&quot;box&quot;&gt;
&lt;description&gt;Generic 5025 (2010) package
0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/description&gt;
&lt;packageinstances&gt;
&lt;packageinstance name=&quot;2010&quot;/&gt;
&lt;/packageinstances&gt;
&lt;/package3d&gt;
&lt;/packages3d&gt;
&lt;symbols&gt;
&lt;symbol name=&quot;CRYSTAL&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Crystal (no ground pin)&amp;lt;/h3&amp;gt;&lt;/description&gt;
&lt;wire x1=&quot;1.016&quot; y1=&quot;0&quot; x2=&quot;2.54&quot; y2=&quot;0&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;0&quot; x2=&quot;-1.016&quot; y2=&quot;0&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-0.381&quot; y1=&quot;1.524&quot; x2=&quot;-0.381&quot; y2=&quot;-1.524&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-0.381&quot; y1=&quot;-1.524&quot; x2=&quot;0.381&quot; y2=&quot;-1.524&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0.381&quot; y1=&quot;-1.524&quot; x2=&quot;0.381&quot; y2=&quot;1.524&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0.381&quot; y1=&quot;1.524&quot; x2=&quot;-0.381&quot; y2=&quot;1.524&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;1.016&quot; y1=&quot;1.778&quot; x2=&quot;1.016&quot; y2=&quot;-1.778&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-1.016&quot; y1=&quot;1.778&quot; x2=&quot;-1.016&quot; y2=&quot;-1.778&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;text x=&quot;0&quot; y=&quot;2.032&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;0&quot; y=&quot;-2.032&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;text x=&quot;-2.159&quot; y=&quot;-1.143&quot; size=&quot;0.8636&quot; layer=&quot;93&quot;&gt;1&lt;/text&gt;
&lt;text x=&quot;1.524&quot; y=&quot;-1.143&quot; size=&quot;0.8636&quot; layer=&quot;93&quot;&gt;2&lt;/text&gt;
&lt;pin name=&quot;2&quot; x=&quot;2.54&quot; y=&quot;0&quot; visible=&quot;off&quot; length=&quot;point&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;1&quot; x=&quot;-2.54&quot; y=&quot;0&quot; visible=&quot;off&quot; length=&quot;point&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot;/&gt;
&lt;/symbol&gt;
&lt;symbol name=&quot;CAP_CERAMIC&quot;&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;2.54&quot; x2=&quot;0&quot; y2=&quot;2.032&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;0&quot; x2=&quot;0&quot; y2=&quot;0.508&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;text x=&quot;0.254&quot; y=&quot;2.159&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;0.254&quot; y=&quot;-1.397&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;rectangle x1=&quot;-2.032&quot; y1=&quot;0.508&quot; x2=&quot;2.032&quot; y2=&quot;1.016&quot; layer=&quot;94&quot;/&gt;
&lt;rectangle x1=&quot;-2.032&quot; y1=&quot;1.524&quot; x2=&quot;2.032&quot; y2=&quot;2.032&quot; layer=&quot;94&quot;/&gt;
&lt;pin name=&quot;1&quot; x=&quot;0&quot; y=&quot;5.08&quot; visible=&quot;off&quot; length=&quot;short&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot; rot=&quot;R270&quot;/&gt;
&lt;pin name=&quot;2&quot; x=&quot;0&quot; y=&quot;-2.54&quot; visible=&quot;off&quot; length=&quot;short&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot; rot=&quot;R90&quot;/&gt;
&lt;/symbol&gt;
&lt;symbol name=&quot;V_REG_78XX&quot;&gt;
&lt;wire x1=&quot;-5.08&quot; y1=&quot;-5.08&quot; x2=&quot;5.08&quot; y2=&quot;-5.08&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;5.08&quot; y1=&quot;-5.08&quot; x2=&quot;5.08&quot; y2=&quot;2.54&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;5.08&quot; y1=&quot;2.54&quot; x2=&quot;-5.08&quot; y2=&quot;2.54&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-5.08&quot; y1=&quot;2.54&quot; x2=&quot;-5.08&quot; y2=&quot;-5.08&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;text x=&quot;-5.08&quot; y=&quot;3.048&quot; size=&quot;1.778&quot; layer=&quot;95&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;-5.08&quot; y=&quot;-7.112&quot; size=&quot;1.778&quot; layer=&quot;96&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;text x=&quot;-2.032&quot; y=&quot;-4.318&quot; size=&quot;1.524&quot; layer=&quot;95&quot;&gt;GND&lt;/text&gt;
&lt;text x=&quot;-4.445&quot; y=&quot;-0.635&quot; size=&quot;1.524&quot; layer=&quot;95&quot;&gt;IN&lt;/text&gt;
&lt;text x=&quot;0.635&quot; y=&quot;-0.635&quot; size=&quot;1.524&quot; layer=&quot;95&quot;&gt;OUT&lt;/text&gt;
&lt;pin name=&quot;IN&quot; x=&quot;-7.62&quot; y=&quot;0&quot; visible=&quot;off&quot; length=&quot;short&quot; direction=&quot;in&quot;/&gt;
&lt;pin name=&quot;GND&quot; x=&quot;0&quot; y=&quot;-7.62&quot; visible=&quot;off&quot; length=&quot;short&quot; direction=&quot;in&quot; rot=&quot;R90&quot;/&gt;
&lt;pin name=&quot;OUT&quot; x=&quot;7.62&quot; y=&quot;0&quot; visible=&quot;off&quot; length=&quot;short&quot; direction=&quot;pas&quot; rot=&quot;R180&quot;/&gt;
&lt;/symbol&gt;
&lt;symbol name=&quot;LED&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;LED&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;0&quot; x2=&quot;0&quot; y2=&quot;-2.54&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;-2.54&quot; x2=&quot;-1.27&quot; y2=&quot;0&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;-2.54&quot; x2=&quot;0&quot; y2=&quot;-2.54&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;-2.54&quot; x2=&quot;-1.27&quot; y2=&quot;-2.54&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;0&quot; x2=&quot;-1.27&quot; y2=&quot;0&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-2.032&quot; y1=&quot;-0.762&quot; x2=&quot;-3.429&quot; y2=&quot;-2.159&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-1.905&quot; y1=&quot;-1.905&quot; x2=&quot;-3.302&quot; y2=&quot;-3.302&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;text x=&quot;-3.429&quot; y=&quot;-4.572&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; rot=&quot;R90&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;1.905&quot; y=&quot;-4.572&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; rot=&quot;R90&quot; align=&quot;top-left&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;pin name=&quot;C&quot; x=&quot;0&quot; y=&quot;-5.08&quot; visible=&quot;off&quot; length=&quot;short&quot; direction=&quot;pas&quot; rot=&quot;R90&quot;/&gt;
&lt;pin name=&quot;A&quot; x=&quot;0&quot; y=&quot;2.54&quot; visible=&quot;off&quot; length=&quot;short&quot; direction=&quot;pas&quot; rot=&quot;R270&quot;/&gt;
&lt;polygon width=&quot;0.1524&quot; layer=&quot;94&quot;&gt;
&lt;vertex x=&quot;-3.429&quot; y=&quot;-2.159&quot;/&gt;
&lt;vertex x=&quot;-3.048&quot; y=&quot;-1.27&quot;/&gt;
&lt;vertex x=&quot;-2.54&quot; y=&quot;-1.778&quot;/&gt;
&lt;/polygon&gt;
&lt;polygon width=&quot;0.1524&quot; layer=&quot;94&quot;&gt;
&lt;vertex x=&quot;-3.302&quot; y=&quot;-3.302&quot;/&gt;
&lt;vertex x=&quot;-2.921&quot; y=&quot;-2.413&quot;/&gt;
&lt;vertex x=&quot;-2.413&quot; y=&quot;-2.921&quot;/&gt;
&lt;/polygon&gt;
&lt;/symbol&gt;
&lt;symbol name=&quot;RESISTOR&quot;&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;0&quot; x2=&quot;-2.159&quot; y2=&quot;1.016&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-2.159&quot; y1=&quot;1.016&quot; x2=&quot;-1.524&quot; y2=&quot;-1.016&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-1.524&quot; y1=&quot;-1.016&quot; x2=&quot;-0.889&quot; y2=&quot;1.016&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-0.889&quot; y1=&quot;1.016&quot; x2=&quot;-0.254&quot; y2=&quot;-1.016&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-0.254&quot; y1=&quot;-1.016&quot; x2=&quot;0.381&quot; y2=&quot;1.016&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0.381&quot; y1=&quot;1.016&quot; x2=&quot;1.016&quot; y2=&quot;-1.016&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;1.016&quot; y1=&quot;-1.016&quot; x2=&quot;1.651&quot; y2=&quot;1.016&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;1.651&quot; y1=&quot;1.016&quot; x2=&quot;2.286&quot; y2=&quot;-1.016&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;2.286&quot; y1=&quot;-1.016&quot; x2=&quot;2.54&quot; y2=&quot;0&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;text x=&quot;0&quot; y=&quot;1.524&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;0&quot; y=&quot;-1.524&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;pin name=&quot;2&quot; x=&quot;5.08&quot; y=&quot;0&quot; visible=&quot;off&quot; length=&quot;short&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;1&quot; x=&quot;-5.08&quot; y=&quot;0&quot; visible=&quot;off&quot; length=&quot;short&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot;/&gt;
&lt;/symbol&gt;
&lt;symbol name=&quot;CAP_POLAR&quot;&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;0&quot; x2=&quot;2.54&quot; y2=&quot;0&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;-1.016&quot; x2=&quot;0&quot; y2=&quot;-2.54&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;-1&quot; x2=&quot;2.4892&quot; y2=&quot;-1.8542&quot; width=&quot;0.254&quot; layer=&quot;94&quot; curve=&quot;-37.878202&quot; cap=&quot;flat&quot;/&gt;
&lt;wire x1=&quot;-2.4669&quot; y1=&quot;-1.8504&quot; x2=&quot;0&quot; y2=&quot;-1.0161&quot; width=&quot;0.254&quot; layer=&quot;94&quot; curve=&quot;-37.376341&quot; cap=&quot;flat&quot;/&gt;
&lt;text x=&quot;1.016&quot; y=&quot;0.635&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;1.016&quot; y=&quot;-4.191&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;rectangle x1=&quot;-2.253&quot; y1=&quot;0.668&quot; x2=&quot;-1.364&quot; y2=&quot;0.795&quot; layer=&quot;94&quot;/&gt;
&lt;rectangle x1=&quot;-1.872&quot; y1=&quot;0.287&quot; x2=&quot;-1.745&quot; y2=&quot;1.176&quot; layer=&quot;94&quot;/&gt;
&lt;pin name=&quot;+&quot; x=&quot;0&quot; y=&quot;2.54&quot; visible=&quot;off&quot; length=&quot;short&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot; rot=&quot;R270&quot;/&gt;
&lt;pin name=&quot;-&quot; x=&quot;0&quot; y=&quot;-5.08&quot; visible=&quot;off&quot; length=&quot;short&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot; rot=&quot;R90&quot;/&gt;
&lt;/symbol&gt;
&lt;symbol name=&quot;CONN_03X2&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;6 Pin Connection&amp;lt;/h3&amp;gt;
3x2 pin layout&lt;/description&gt;
&lt;pin name=&quot;1&quot; x=&quot;-7.62&quot; y=&quot;2.54&quot; visible=&quot;pad&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;3&quot; x=&quot;-7.62&quot; y=&quot;0&quot; visible=&quot;pad&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;5&quot; x=&quot;-7.62&quot; y=&quot;-2.54&quot; visible=&quot;pad&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;6&quot; x=&quot;7.62&quot; y=&quot;-2.54&quot; visible=&quot;pad&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;4&quot; x=&quot;7.62&quot; y=&quot;0&quot; visible=&quot;pad&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;2&quot; x=&quot;7.62&quot; y=&quot;2.54&quot; visible=&quot;pad&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;text x=&quot;-3.556&quot; y=&quot;5.588&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;-3.302&quot; y=&quot;-5.842&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-left&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;-2.54&quot; x2=&quot;-2.54&quot; y2=&quot;-2.54&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;0&quot; x2=&quot;-2.54&quot; y2=&quot;0&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;2.54&quot; x2=&quot;-2.54&quot; y2=&quot;2.54&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-3.81&quot; y1=&quot;5.08&quot; x2=&quot;-3.81&quot; y2=&quot;-5.08&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;3.81&quot; y1=&quot;-5.08&quot; x2=&quot;-3.81&quot; y2=&quot;-5.08&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;3.81&quot; y1=&quot;-5.08&quot; x2=&quot;3.81&quot; y2=&quot;5.08&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-3.81&quot; y1=&quot;5.08&quot; x2=&quot;3.81&quot; y2=&quot;5.08&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;-2.54&quot; x2=&quot;2.54&quot; y2=&quot;-2.54&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;0&quot; x2=&quot;2.54&quot; y2=&quot;0&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;2.54&quot; x2=&quot;2.54&quot; y2=&quot;2.54&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;/symbol&gt;
&lt;symbol name=&quot;SWITCH-MOMENTARY-2&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Momentary Switch (Pushbutton) - SPST&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;Normally-open (NO) SPST momentary switches (buttons, pushbuttons).&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;wire x1=&quot;1.905&quot; y1=&quot;0&quot; x2=&quot;2.54&quot; y2=&quot;0&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;0&quot; x2=&quot;1.905&quot; y2=&quot;1.27&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;circle x=&quot;-2.54&quot; y=&quot;0&quot; radius=&quot;0.127&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;circle x=&quot;2.54&quot; y=&quot;0&quot; radius=&quot;0.127&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;text x=&quot;0&quot; y=&quot;1.524&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;0&quot; y=&quot;-0.508&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;pin name=&quot;1&quot; x=&quot;-5.08&quot; y=&quot;0&quot; visible=&quot;off&quot; length=&quot;short&quot; direction=&quot;pas&quot; swaplevel=&quot;2&quot;/&gt;
&lt;pin name=&quot;2&quot; x=&quot;5.08&quot; y=&quot;0&quot; visible=&quot;off&quot; length=&quot;short&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot; rot=&quot;R180&quot;/&gt;
&lt;/symbol&gt;
&lt;symbol name=&quot;FRAME-LETTER&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Schematic Frame - Letter&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;Standard 8.5x11 US Ledger frame&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;Devices using&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;FRAME-LETTER&amp;lt;/li&amp;gt;&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;185.42&quot; x2=&quot;248.92&quot; y2=&quot;185.42&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;248.92&quot; y1=&quot;185.42&quot; x2=&quot;248.92&quot; y2=&quot;0&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;185.42&quot; x2=&quot;0&quot; y2=&quot;0&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;0&quot; x2=&quot;248.92&quot; y2=&quot;0&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;/symbol&gt;
&lt;symbol name=&quot;DOCFIELD&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Schematic Documentation Field&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;Autofilling schematic symbol-layer info including board name, designer, revision, and save date.&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;Devices using:
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;FRAME-LEDGER&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;FRAME-LETTER&amp;lt;/li&amp;gt;&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;0&quot; x2=&quot;71.12&quot; y2=&quot;0&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;101.6&quot; y1=&quot;10.16&quot; x2=&quot;87.63&quot; y2=&quot;10.16&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;0&quot; x2=&quot;0&quot; y2=&quot;5.08&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;5.08&quot; x2=&quot;71.12&quot; y2=&quot;5.08&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;5.08&quot; x2=&quot;0&quot; y2=&quot;10.16&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;101.6&quot; y1=&quot;10.16&quot; x2=&quot;101.6&quot; y2=&quot;5.08&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;71.12&quot; y1=&quot;5.08&quot; x2=&quot;71.12&quot; y2=&quot;0&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;71.12&quot; y1=&quot;5.08&quot; x2=&quot;87.63&quot; y2=&quot;5.08&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;71.12&quot; y1=&quot;0&quot; x2=&quot;101.6&quot; y2=&quot;0&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;87.63&quot; y1=&quot;10.16&quot; x2=&quot;87.63&quot; y2=&quot;5.08&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;87.63&quot; y1=&quot;10.16&quot; x2=&quot;0&quot; y2=&quot;10.16&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;87.63&quot; y1=&quot;5.08&quot; x2=&quot;101.6&quot; y2=&quot;5.08&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;101.6&quot; y1=&quot;5.08&quot; x2=&quot;101.6&quot; y2=&quot;0&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;10.16&quot; x2=&quot;0&quot; y2=&quot;17.78&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;101.6&quot; y1=&quot;25.4&quot; x2=&quot;0&quot; y2=&quot;25.4&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;101.6&quot; y1=&quot;25.4&quot; x2=&quot;101.6&quot; y2=&quot;17.78&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;17.78&quot; x2=&quot;101.6&quot; y2=&quot;17.78&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;17.78&quot; x2=&quot;0&quot; y2=&quot;25.4&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;101.6&quot; y1=&quot;17.78&quot; x2=&quot;101.6&quot; y2=&quot;10.16&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;text x=&quot;1.27&quot; y=&quot;1.27&quot; size=&quot;2.54&quot; layer=&quot;94&quot; font=&quot;vector&quot;&gt;Date:&lt;/text&gt;
&lt;text x=&quot;12.7&quot; y=&quot;1.27&quot; size=&quot;2.54&quot; layer=&quot;94&quot; font=&quot;vector&quot;&gt;&amp;gt;LAST_DATE_TIME&lt;/text&gt;
&lt;text x=&quot;72.39&quot; y=&quot;1.27&quot; size=&quot;2.54&quot; layer=&quot;94&quot; font=&quot;vector&quot;&gt;Sheet:&lt;/text&gt;
&lt;text x=&quot;86.36&quot; y=&quot;1.27&quot; size=&quot;2.54&quot; layer=&quot;94&quot; font=&quot;vector&quot;&gt;&amp;gt;SHEET&lt;/text&gt;
&lt;text x=&quot;88.9&quot; y=&quot;6.35&quot; size=&quot;2.54&quot; layer=&quot;94&quot; font=&quot;vector&quot;&gt;REV:&lt;/text&gt;
&lt;text x=&quot;1.27&quot; y=&quot;12.7&quot; size=&quot;2.54&quot; layer=&quot;94&quot; font=&quot;vector&quot;&gt;TITLE:&lt;/text&gt;
&lt;text x=&quot;15.494&quot; y=&quot;12.7&quot; size=&quot;2.7432&quot; layer=&quot;94&quot; font=&quot;vector&quot;&gt;&amp;gt;DRAWING_NAME&lt;/text&gt;
&lt;text x=&quot;1.27&quot; y=&quot;6.35&quot; size=&quot;2.54&quot; layer=&quot;94&quot; font=&quot;vector&quot;&gt;Design by:&lt;/text&gt;
&lt;text x=&quot;1.27&quot; y=&quot;20.32&quot; size=&quot;2.54&quot; layer=&quot;94&quot; font=&quot;vector&quot;&gt;COMPANY NAME:&lt;/text&gt;
&lt;/symbol&gt;
&lt;symbol name=&quot;PESD1CAN&quot;&gt;
&lt;pin name=&quot;2&quot; x=&quot;-7.62&quot; y=&quot;-2.54&quot; length=&quot;middle&quot; direction=&quot;pas&quot;/&gt;
&lt;pin name=&quot;1&quot; x=&quot;-7.62&quot; y=&quot;2.54&quot; length=&quot;middle&quot; direction=&quot;pas&quot;/&gt;
&lt;pin name=&quot;3&quot; x=&quot;7.62&quot; y=&quot;0&quot; length=&quot;middle&quot; direction=&quot;pas&quot; rot=&quot;R180&quot;/&gt;
&lt;text x=&quot;-5.08&quot; y=&quot;5.588&quot; size=&quot;1.778&quot; layer=&quot;95&quot; ratio=&quot;10&quot; rot=&quot;SR0&quot;&gt;&amp;gt;Name&lt;/text&gt;
&lt;text x=&quot;-5.08&quot; y=&quot;-7.112&quot; size=&quot;1.778&quot; layer=&quot;96&quot; ratio=&quot;10&quot; rot=&quot;SR0&quot;&gt;&amp;gt;Value&lt;/text&gt;
&lt;wire x1=&quot;-5.08&quot; y1=&quot;-5.08&quot; x2=&quot;-5.08&quot; y2=&quot;5.08&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;2.54&quot; x2=&quot;-1.778&quot; y2=&quot;3.81&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-1.778&quot; y1=&quot;3.81&quot; x2=&quot;-1.778&quot; y2=&quot;2.54&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-1.778&quot; y1=&quot;2.54&quot; x2=&quot;-1.778&quot; y2=&quot;1.27&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-1.778&quot; y1=&quot;1.27&quot; x2=&quot;-2.54&quot; y2=&quot;2.54&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-1.778&quot; y1=&quot;2.54&quot; x2=&quot;-0.762&quot; y2=&quot;2.54&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-0.762&quot; y1=&quot;2.54&quot; x2=&quot;-0.762&quot; y2=&quot;3.81&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-0.762&quot; y1=&quot;3.81&quot; x2=&quot;0&quot; y2=&quot;2.54&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;2.54&quot; x2=&quot;-0.762&quot; y2=&quot;1.27&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-0.762&quot; y1=&quot;2.54&quot; x2=&quot;-0.762&quot; y2=&quot;1.27&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;3.81&quot; x2=&quot;-2.54&quot; y2=&quot;1.27&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;1.27&quot; x2=&quot;-2.286&quot; y2=&quot;1.27&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;3.81&quot; x2=&quot;-2.794&quot; y2=&quot;3.81&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;2.54&quot; x2=&quot;0&quot; y2=&quot;3.81&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;3.81&quot; x2=&quot;0.254&quot; y2=&quot;3.81&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;2.54&quot; x2=&quot;0&quot; y2=&quot;1.27&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;1.27&quot; x2=&quot;-0.254&quot; y2=&quot;1.27&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-5.08&quot; y1=&quot;-5.08&quot; x2=&quot;5.08&quot; y2=&quot;-5.08&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;-1.27&quot; x2=&quot;-2.54&quot; y2=&quot;-2.54&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;-2.54&quot; x2=&quot;-2.54&quot; y2=&quot;-3.81&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;-3.81&quot; x2=&quot;-2.286&quot; y2=&quot;-3.81&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;-1.27&quot; x2=&quot;-2.794&quot; y2=&quot;-1.27&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;-2.54&quot; x2=&quot;-1.778&quot; y2=&quot;-1.27&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-1.778&quot; y1=&quot;-1.27&quot; x2=&quot;-1.778&quot; y2=&quot;-2.54&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-1.778&quot; y1=&quot;-2.54&quot; x2=&quot;-1.778&quot; y2=&quot;-3.81&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-1.778&quot; y1=&quot;-3.81&quot; x2=&quot;-2.54&quot; y2=&quot;-2.54&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-1.778&quot; y1=&quot;-2.54&quot; x2=&quot;-0.762&quot; y2=&quot;-2.54&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-0.762&quot; y1=&quot;-2.54&quot; x2=&quot;-0.762&quot; y2=&quot;-1.27&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-0.762&quot; y1=&quot;-1.27&quot; x2=&quot;0&quot; y2=&quot;-2.54&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-0.762&quot; y1=&quot;-2.54&quot; x2=&quot;-0.762&quot; y2=&quot;-3.81&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;-2.54&quot; x2=&quot;-0.762&quot; y2=&quot;-3.81&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0.254&quot; y1=&quot;-1.27&quot; x2=&quot;0&quot; y2=&quot;-1.27&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;-1.27&quot; x2=&quot;0&quot; y2=&quot;-2.54&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;-2.54&quot; x2=&quot;0&quot; y2=&quot;-3.81&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;-3.81&quot; x2=&quot;-0.254&quot; y2=&quot;-3.81&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0.254&quot; y1=&quot;2.54&quot; x2=&quot;2.54&quot; y2=&quot;2.54&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;2.54&quot; y1=&quot;2.54&quot; x2=&quot;2.54&quot; y2=&quot;-2.54&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;2.54&quot; y1=&quot;-2.54&quot; x2=&quot;0&quot; y2=&quot;-2.54&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-5.08&quot; y1=&quot;5.08&quot; x2=&quot;5.08&quot; y2=&quot;5.08&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;5.08&quot; y1=&quot;5.08&quot; x2=&quot;5.08&quot; y2=&quot;-5.08&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;/symbol&gt;
&lt;symbol name=&quot;MCP2515&quot;&gt;
&lt;pin name=&quot;TXCAN&quot; x=&quot;-12.7&quot; y=&quot;20.32&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;RXCAN&quot; x=&quot;-12.7&quot; y=&quot;15.24&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;CLKOUT/SOF&quot; x=&quot;-12.7&quot; y=&quot;10.16&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;TX0RTS&quot; x=&quot;-12.7&quot; y=&quot;5.08&quot; length=&quot;middle&quot; function=&quot;dot&quot;/&gt;
&lt;pin name=&quot;TX1RTS&quot; x=&quot;-12.7&quot; y=&quot;0&quot; length=&quot;middle&quot; function=&quot;dot&quot;/&gt;
&lt;pin name=&quot;TX2RTS&quot; x=&quot;-12.7&quot; y=&quot;-5.08&quot; length=&quot;middle&quot; function=&quot;dot&quot;/&gt;
&lt;pin name=&quot;OSC2&quot; x=&quot;-12.7&quot; y=&quot;-10.16&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;OSC1&quot; x=&quot;-12.7&quot; y=&quot;-15.24&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;GND&quot; x=&quot;-12.7&quot; y=&quot;-20.32&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;RX1BF&quot; x=&quot;20.32&quot; y=&quot;-20.32&quot; length=&quot;middle&quot; function=&quot;dot&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;RX0BF&quot; x=&quot;20.32&quot; y=&quot;-15.24&quot; length=&quot;middle&quot; function=&quot;dot&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;INT&quot; x=&quot;20.32&quot; y=&quot;-10.16&quot; length=&quot;middle&quot; function=&quot;dot&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;SCK&quot; x=&quot;20.32&quot; y=&quot;-5.08&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;SI&quot; x=&quot;20.32&quot; y=&quot;0&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;SO&quot; x=&quot;20.32&quot; y=&quot;5.08&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;CS&quot; x=&quot;20.32&quot; y=&quot;10.16&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;RESET&quot; x=&quot;20.32&quot; y=&quot;15.24&quot; length=&quot;middle&quot; function=&quot;dot&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;VCC&quot; x=&quot;20.32&quot; y=&quot;20.32&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;wire x1=&quot;-7.62&quot; y1=&quot;22.86&quot; x2=&quot;15.24&quot; y2=&quot;22.86&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;15.24&quot; y1=&quot;-22.86&quot; x2=&quot;-7.62&quot; y2=&quot;-22.86&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-7.62&quot; y1=&quot;-22.86&quot; x2=&quot;-7.62&quot; y2=&quot;22.86&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;15.24&quot; y1=&quot;22.86&quot; x2=&quot;15.24&quot; y2=&quot;-22.86&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;text x=&quot;-7.62&quot; y=&quot;23.368&quot; size=&quot;1.778&quot; layer=&quot;95&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;-7.62&quot; y=&quot;-24.892&quot; size=&quot;1.778&quot; layer=&quot;96&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;/symbol&gt;
&lt;symbol name=&quot;MCP2551&quot;&gt;
&lt;wire x1=&quot;-5.08&quot; y1=&quot;10.16&quot; x2=&quot;-5.08&quot; y2=&quot;-2.54&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-5.08&quot; y1=&quot;-2.54&quot; x2=&quot;10.16&quot; y2=&quot;-2.54&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;10.16&quot; y1=&quot;-2.54&quot; x2=&quot;10.16&quot; y2=&quot;10.16&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;10.16&quot; y1=&quot;10.16&quot; x2=&quot;-5.08&quot; y2=&quot;10.16&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;pin name=&quot;TXD&quot; x=&quot;-10.16&quot; y=&quot;7.62&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;GND&quot; x=&quot;-10.16&quot; y=&quot;5.08&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;VCC&quot; x=&quot;-10.16&quot; y=&quot;2.54&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;RXD&quot; x=&quot;-10.16&quot; y=&quot;0&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;VREF&quot; x=&quot;15.24&quot; y=&quot;0&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;CANL&quot; x=&quot;15.24&quot; y=&quot;2.54&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;CANH&quot; x=&quot;15.24&quot; y=&quot;5.08&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;RS&quot; x=&quot;15.24&quot; y=&quot;7.62&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;text x=&quot;-5.08&quot; y=&quot;10.541&quot; size=&quot;1.778&quot; layer=&quot;95&quot;&gt;&amp;gt;Name&lt;/text&gt;
&lt;text x=&quot;-5.08&quot; y=&quot;-4.572&quot; size=&quot;1.778&quot; layer=&quot;96&quot;&gt;&amp;gt;Value&lt;/text&gt;
&lt;/symbol&gt;
&lt;symbol name=&quot;ATMEGA328P&quot;&gt;
&lt;description&gt;Symbol for Atmega328/168/88/48 chips, 28-pin versions&lt;/description&gt;
&lt;text x=&quot;-17.78&quot; y=&quot;36.068&quot; size=&quot;1.778&quot; layer=&quot;95&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;-17.78&quot; y=&quot;-37.592&quot; size=&quot;1.778&quot; layer=&quot;96&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;pin name=&quot;PB5(SCK)&quot; x=&quot;22.86&quot; y=&quot;-12.7&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;PB7(XTAL2/TOSC2)&quot; x=&quot;-22.86&quot; y=&quot;-12.7&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;PB6(XTAL1/TOSC1)&quot; x=&quot;-22.86&quot; y=&quot;-7.62&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;GND@1&quot; x=&quot;-22.86&quot; y=&quot;-2.54&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;VCC&quot; x=&quot;-22.86&quot; y=&quot;2.54&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;AREF&quot; x=&quot;22.86&quot; y=&quot;-2.54&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;AVCC&quot; x=&quot;22.86&quot; y=&quot;-7.62&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;PB4(MISO)&quot; x=&quot;22.86&quot; y=&quot;-17.78&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;PB3(MOSI/OC2)&quot; x=&quot;22.86&quot; y=&quot;-22.86&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;PB2(SS/OC1B)&quot; x=&quot;22.86&quot; y=&quot;-27.94&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;PB1(OC1A)&quot; x=&quot;22.86&quot; y=&quot;-33.02&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;PB0(ICP)&quot; x=&quot;-22.86&quot; y=&quot;-33.02&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;PD7(AIN1)&quot; x=&quot;-22.86&quot; y=&quot;-27.94&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;PD6(AIN0)&quot; x=&quot;-22.86&quot; y=&quot;-22.86&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;PD5(T1)&quot; x=&quot;-22.86&quot; y=&quot;-17.78&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;PD4(XCK/T0)&quot; x=&quot;-22.86&quot; y=&quot;7.62&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;PD3(INT1)&quot; x=&quot;-22.86&quot; y=&quot;12.7&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;PD2(INT0)&quot; x=&quot;-22.86&quot; y=&quot;17.78&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;PD1(TXD)&quot; x=&quot;-22.86&quot; y=&quot;22.86&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;PD0(RXD)&quot; x=&quot;-22.86&quot; y=&quot;27.94&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;PC5(ADC5/SCL)&quot; x=&quot;22.86&quot; y=&quot;33.02&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;PC4(ADC4/SDA)&quot; x=&quot;22.86&quot; y=&quot;27.94&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;PC3(ADC3)&quot; x=&quot;22.86&quot; y=&quot;22.86&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;PC2(ADC2)&quot; x=&quot;22.86&quot; y=&quot;17.78&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;PC1(ADC1)&quot; x=&quot;22.86&quot; y=&quot;12.7&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;PC0(ADC0)&quot; x=&quot;22.86&quot; y=&quot;7.62&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;PC6(/RESET)&quot; x=&quot;-22.86&quot; y=&quot;33.02&quot; length=&quot;middle&quot; function=&quot;dot&quot;/&gt;
&lt;pin name=&quot;GND@2&quot; x=&quot;22.86&quot; y=&quot;2.54&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;wire x1=&quot;-17.78&quot; y1=&quot;35.56&quot; x2=&quot;-17.78&quot; y2=&quot;-35.56&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-17.78&quot; y1=&quot;-35.56&quot; x2=&quot;17.78&quot; y2=&quot;-35.56&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;17.78&quot; y1=&quot;-35.56&quot; x2=&quot;17.78&quot; y2=&quot;35.56&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;17.78&quot; y1=&quot;35.56&quot; x2=&quot;-17.78&quot; y2=&quot;35.56&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;/symbol&gt;
&lt;symbol name=&quot;SMT-JUMPER_2_NO&quot;&gt;
&lt;wire x1=&quot;0.381&quot; y1=&quot;0.635&quot; x2=&quot;0.381&quot; y2=&quot;-0.635&quot; width=&quot;1.27&quot; layer=&quot;94&quot; curve=&quot;-180&quot; cap=&quot;flat&quot;/&gt;
&lt;wire x1=&quot;-0.381&quot; y1=&quot;-0.635&quot; x2=&quot;-0.381&quot; y2=&quot;0.635&quot; width=&quot;1.27&quot; layer=&quot;94&quot; curve=&quot;-180&quot; cap=&quot;flat&quot;/&gt;
&lt;wire x1=&quot;2.54&quot; y1=&quot;0&quot; x2=&quot;1.651&quot; y2=&quot;0&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;0&quot; x2=&quot;-1.651&quot; y2=&quot;0&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;text x=&quot;-2.54&quot; y=&quot;2.54&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;-2.54&quot; y=&quot;-2.54&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-left&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;pin name=&quot;2&quot; x=&quot;5.08&quot; y=&quot;0&quot; visible=&quot;off&quot; length=&quot;short&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;1&quot; x=&quot;-5.08&quot; y=&quot;0&quot; visible=&quot;off&quot; length=&quot;short&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot;/&gt;
&lt;/symbol&gt;
&lt;symbol name=&quot;DGND&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Digital Ground Supply&amp;lt;/h3&amp;gt;&lt;/description&gt;
&lt;wire x1=&quot;-1.905&quot; y1=&quot;0&quot; x2=&quot;1.905&quot; y2=&quot;0&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;pin name=&quot;GND&quot; x=&quot;0&quot; y=&quot;2.54&quot; visible=&quot;off&quot; length=&quot;short&quot; direction=&quot;sup&quot; rot=&quot;R270&quot;/&gt;
&lt;text x=&quot;0&quot; y=&quot;-0.254&quot; size=&quot;1.778&quot; layer=&quot;96&quot; align=&quot;top-center&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;/symbol&gt;
&lt;symbol name=&quot;VCC&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;VCC Voltage Supply&amp;lt;/h3&amp;gt;&lt;/description&gt;
&lt;wire x1=&quot;0.762&quot; y1=&quot;1.27&quot; x2=&quot;0&quot; y2=&quot;2.54&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;2.54&quot; x2=&quot;-0.762&quot; y2=&quot;1.27&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;pin name=&quot;VCC&quot; x=&quot;0&quot; y=&quot;0&quot; visible=&quot;off&quot; length=&quot;short&quot; direction=&quot;sup&quot; rot=&quot;R90&quot;/&gt;
&lt;text x=&quot;0&quot; y=&quot;2.794&quot; size=&quot;1.778&quot; layer=&quot;96&quot; align=&quot;bottom-center&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;/symbol&gt;
&lt;symbol name=&quot;CONN_07X2&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;16 Pin Connection&amp;lt;/h3&amp;gt;
2x8 pin layout&lt;/description&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;5.08&quot; x2=&quot;-2.54&quot; y2=&quot;5.08&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;7.62&quot; x2=&quot;-2.54&quot; y2=&quot;7.62&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;10.16&quot; x2=&quot;-2.54&quot; y2=&quot;10.16&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-3.81&quot; y1=&quot;12.7&quot; x2=&quot;-3.81&quot; y2=&quot;-7.62&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;0&quot; x2=&quot;-2.54&quot; y2=&quot;0&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;2.54&quot; x2=&quot;-2.54&quot; y2=&quot;2.54&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;-2.54&quot; x2=&quot;-2.54&quot; y2=&quot;-2.54&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;-5.08&quot; x2=&quot;-2.54&quot; y2=&quot;-5.08&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;3.81&quot; y1=&quot;-7.62&quot; x2=&quot;-3.81&quot; y2=&quot;-7.62&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;3.81&quot; y1=&quot;-7.62&quot; x2=&quot;3.81&quot; y2=&quot;12.7&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-3.81&quot; y1=&quot;12.7&quot; x2=&quot;3.81&quot; y2=&quot;12.7&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;-2.54&quot; x2=&quot;2.54&quot; y2=&quot;-2.54&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;-5.08&quot; x2=&quot;2.54&quot; y2=&quot;-5.08&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;0&quot; x2=&quot;2.54&quot; y2=&quot;0&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;2.54&quot; x2=&quot;2.54&quot; y2=&quot;2.54&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;5.08&quot; x2=&quot;2.54&quot; y2=&quot;5.08&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;7.62&quot; x2=&quot;2.54&quot; y2=&quot;7.62&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;10.16&quot; x2=&quot;2.54&quot; y2=&quot;10.16&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;text x=&quot;-3.81&quot; y=&quot;-9.906&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;text x=&quot;-3.81&quot; y=&quot;13.208&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;pin name=&quot;1&quot; x=&quot;-7.62&quot; y=&quot;10.16&quot; visible=&quot;pad&quot; length=&quot;middle&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot;/&gt;
&lt;pin name=&quot;2&quot; x=&quot;7.62&quot; y=&quot;10.16&quot; visible=&quot;pad&quot; length=&quot;middle&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;3&quot; x=&quot;-7.62&quot; y=&quot;7.62&quot; visible=&quot;pad&quot; length=&quot;middle&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot;/&gt;
&lt;pin name=&quot;4&quot; x=&quot;7.62&quot; y=&quot;7.62&quot; visible=&quot;pad&quot; length=&quot;middle&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;5&quot; x=&quot;-7.62&quot; y=&quot;5.08&quot; visible=&quot;pad&quot; length=&quot;middle&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot;/&gt;
&lt;pin name=&quot;6&quot; x=&quot;7.62&quot; y=&quot;5.08&quot; visible=&quot;pad&quot; length=&quot;middle&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;7&quot; x=&quot;-7.62&quot; y=&quot;2.54&quot; visible=&quot;pad&quot; length=&quot;middle&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot;/&gt;
&lt;pin name=&quot;8&quot; x=&quot;7.62&quot; y=&quot;2.54&quot; visible=&quot;pad&quot; length=&quot;middle&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;9&quot; x=&quot;-7.62&quot; y=&quot;0&quot; visible=&quot;pad&quot; length=&quot;middle&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot;/&gt;
&lt;pin name=&quot;10&quot; x=&quot;7.62&quot; y=&quot;0&quot; visible=&quot;pad&quot; length=&quot;middle&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;11&quot; x=&quot;-7.62&quot; y=&quot;-2.54&quot; visible=&quot;pad&quot; length=&quot;middle&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot;/&gt;
&lt;pin name=&quot;12&quot; x=&quot;7.62&quot; y=&quot;-2.54&quot; visible=&quot;pad&quot; length=&quot;middle&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;13&quot; x=&quot;-7.62&quot; y=&quot;-5.08&quot; visible=&quot;pad&quot; length=&quot;middle&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot;/&gt;
&lt;pin name=&quot;14&quot; x=&quot;7.62&quot; y=&quot;-5.08&quot; visible=&quot;pad&quot; length=&quot;middle&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot; rot=&quot;R180&quot;/&gt;
&lt;/symbol&gt;
&lt;/symbols&gt;
&lt;devicesets&gt;
&lt;deviceset name=&quot;CRYSTAL&quot; prefix=&quot;Y&quot; uservalue=&quot;yes&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;16MHz Crystal&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;&amp;lt;a href=&quot;http://www.digikey.com/product-search/en?keywords=535-9122-1-ND&quot;&amp;gt;Digikey Example&amp;lt;/a&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;Frequency: 16MHz&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Frequency Stability: &amp;amp;plusmn;50ppm&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Frequency Tolerance: &amp;amp;plusmn;20ppm&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Load Capacitance: 18pF&amp;lt;/li&amp;gt;&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;&amp;lt;b&amp;gt;SparkFun Products:&amp;lt;/b&amp;gt;
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;&amp;lt;a href=”https://www.sparkfun.com/products/12640”&amp;gt;Pro Micro -5V/16MHz&amp;lt;/a&amp;gt;&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=”https://www.sparkfun.com/products/10097”&amp;gt;SparkFun Serial Enabled LCD Kit&amp;lt;/a&amp;gt;&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;gates&gt;
&lt;gate name=&quot;G$1&quot; symbol=&quot;CRYSTAL&quot; x=&quot;0&quot; y=&quot;0&quot;/&gt;
&lt;/gates&gt;
&lt;devices&gt;
&lt;device name=&quot;PTH-HC49US&quot; package=&quot;HC49US&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;1&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;2&quot; pad=&quot;2&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;&gt;
&lt;attribute name=&quot;PROD_ID&quot; value=&quot;XTAL-08181&quot;/&gt;
&lt;attribute name=&quot;SF_ID&quot; value=&quot;COM-00536&quot;/&gt;
&lt;/technology&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;/devices&gt;
&lt;/deviceset&gt;
&lt;deviceset name=&quot;CAP_CERAMIC&quot; prefix=&quot;C&quot; uservalue=&quot;yes&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Ceramic Capacitors&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;gates&gt;
&lt;gate name=&quot;G$1&quot; symbol=&quot;CAP_CERAMIC&quot; x=&quot;0&quot; y=&quot;0&quot;/&gt;
&lt;/gates&gt;
&lt;devices&gt;
&lt;device name=&quot;-PTH-2.54MM-200V-5%&quot; package=&quot;CAP-PTH-2.54&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;1&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;2&quot; pad=&quot;2&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;/&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;/devices&gt;
&lt;/deviceset&gt;
&lt;deviceset name=&quot;V_REG_78XX&quot; prefix=&quot;U&quot; uservalue=&quot;yes&quot;&gt;
&lt;description&gt;&amp;lt;b&amp;gt;Voltage Regulator&amp;lt;/b&amp;gt;
Standard 78xx regulator. IGO (Input Ground Output). 

Spark Fun Electronics SKU : COM-00107&lt;/description&gt;
&lt;gates&gt;
&lt;gate name=&quot;G$1&quot; symbol=&quot;V_REG_78XX&quot; x=&quot;0&quot; y=&quot;0&quot;/&gt;
&lt;/gates&gt;
&lt;devices&gt;
&lt;device name=&quot;SIDE&quot; package=&quot;78XXL&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;GND&quot; pad=&quot;GND&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;IN&quot; pad=&quot;IN&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;OUT&quot; pad=&quot;OUT&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;/&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;device name=&quot;-TO-220&quot; package=&quot;TO-220-ALT&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;GND&quot; pad=&quot;GND&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;IN&quot; pad=&quot;IN&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;OUT&quot; pad=&quot;OUT&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;&gt;
&lt;attribute name=&quot;PROD_ID&quot; value=&quot;VREG-08450&quot; constant=&quot;no&quot;/&gt;
&lt;attribute name=&quot;SF_ID&quot; value=&quot;COM-00107&quot; constant=&quot;no&quot;/&gt;
&lt;/technology&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;/devices&gt;
&lt;/deviceset&gt;
&lt;deviceset name=&quot;LED&quot; prefix=&quot;D&quot; uservalue=&quot;yes&quot;&gt;
&lt;description&gt;&amp;lt;b&amp;gt;LED (Generic)&amp;lt;/b&amp;gt;
&amp;lt;p&amp;gt;Standard schematic elements and footprints for 5mm, 3mm, 1206, and 0603 sized LEDs. Generic LEDs with no color specified.&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;gates&gt;
&lt;gate name=&quot;G$1&quot; symbol=&quot;LED&quot; x=&quot;0&quot; y=&quot;0&quot;/&gt;
&lt;/gates&gt;
&lt;devices&gt;
&lt;device name=&quot;5MM&quot; package=&quot;LED_5MM&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;A&quot; pad=&quot;A&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;C&quot; pad=&quot;K&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;/&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;device name=&quot;3MM&quot; package=&quot;LED_3MM&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;A&quot; pad=&quot;A&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;C&quot; pad=&quot;K&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;&gt;
&lt;attribute name=&quot;PROD_ID&quot; value=&quot;DIO-08794&quot; constant=&quot;no&quot;/&gt;
&lt;/technology&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;device name=&quot;10MM&quot; package=&quot;LED_10MM&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;A&quot; pad=&quot;A&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;C&quot; pad=&quot;C&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;/&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;/devices&gt;
&lt;/deviceset&gt;
&lt;deviceset name=&quot;RESISTOR&quot; prefix=&quot;R&quot; uservalue=&quot;yes&quot;&gt;
&lt;description&gt;Generic Resistor Package&lt;/description&gt;
&lt;gates&gt;
&lt;gate name=&quot;G$1&quot; symbol=&quot;RESISTOR&quot; x=&quot;0&quot; y=&quot;0&quot;/&gt;
&lt;/gates&gt;
&lt;devices&gt;
&lt;device name=&quot;AXIAL-0.3&quot; package=&quot;AXIAL-0.3&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;1&quot; pad=&quot;P$1&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;2&quot; pad=&quot;P$2&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;/&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;device name=&quot;2010&quot; package=&quot;2010&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;1&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;2&quot; pad=&quot;2&quot;/&gt;
&lt;/connects&gt;
&lt;package3dinstances&gt;
&lt;package3dinstance package3d_urn=&quot;urn:adsk.eagle:package:39649/1&quot;/&gt;
&lt;/package3dinstances&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;/&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;/devices&gt;
&lt;/deviceset&gt;
&lt;deviceset name=&quot;CAP_POLAR&quot; prefix=&quot;C&quot; uservalue=&quot;yes&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Polarized Capacitors&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;gates&gt;
&lt;gate name=&quot;G$1&quot; symbol=&quot;CAP_POLAR&quot; x=&quot;0&quot; y=&quot;0&quot;/&gt;
&lt;/gates&gt;
&lt;devices&gt;
&lt;device name=&quot;-RADIAL-2.5MM-25V-20%&quot; package=&quot;CPOL-RADIAL-2.5MM-5MM&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;+&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;-&quot; pad=&quot;2&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;/&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;/devices&gt;
&lt;/deviceset&gt;
&lt;deviceset name=&quot;CONN_03X2&quot; prefix=&quot;J&quot; uservalue=&quot;yes&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections&amp;lt;/h3&amp;gt;

&amp;lt;p&amp;gt;&amp;lt;/p&amp;gt;

&amp;lt;p&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;b&amp;gt;You can populate with any combo of single row headers, but if you&#039;d like an exact match, check these:&amp;lt;/b&amp;gt;
&amp;lt;ul&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/12807&quot;&amp;gt; Header - 2x3 (Male, 0.1&quot;)&amp;lt;/a&amp;gt; (PRT-12807)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/13010&quot;&amp;gt; Header - 2x3 (Female, 0.1&quot;)&amp;lt;/a&amp;gt; (PRT-13010)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/10877&quot;&amp;gt; 2x3 Pin Shrouded Header&amp;lt;/a&amp;gt; (PRT-10877)&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;

&amp;lt;p&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;b&amp;gt;On any of the 0.1 inch spaced packages, you can populate with these:&amp;lt;/b&amp;gt;
&amp;lt;ul&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/116&quot;&amp;gt; Break Away Headers - Straight&amp;lt;/a&amp;gt; (PRT-00116)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/553&quot;&amp;gt; Break Away Male Headers - Right Angle&amp;lt;/a&amp;gt; (PRT-00553)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/115&quot;&amp;gt; Female Headers&amp;lt;/a&amp;gt; (PRT-00115)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/117&quot;&amp;gt; Break Away Headers - Machine Pin&amp;lt;/a&amp;gt; (PRT-00117)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/743&quot;&amp;gt; Break Away Female Headers - Swiss Machine Pin&amp;lt;/a&amp;gt; (PRT-00743)&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;

&amp;lt;p&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;b&amp;gt;Special note: the shrouded connector mates well with our 3x2 ribbon cables:&amp;lt;/b&amp;gt;
&amp;lt;ul&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/10651&quot;&amp;gt; Ribbon Crimp Connector - 6-pin (2x3, Female)&amp;lt;/a&amp;gt; (PRT-10651)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/10646&quot;&amp;gt; Ribbon Cable - 6 wire (15ft)&amp;lt;/a&amp;gt; (PRT-10646)&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&lt;/description&gt;
&lt;gates&gt;
&lt;gate name=&quot;G$1&quot; symbol=&quot;CONN_03X2&quot; x=&quot;0&quot; y=&quot;0&quot;/&gt;
&lt;/gates&gt;
&lt;devices&gt;
&lt;device name=&quot;SHROUD&quot; package=&quot;2X3-SHROUDED&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;1&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;2&quot; pad=&quot;2&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;3&quot; pad=&quot;3&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;4&quot; pad=&quot;4&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;5&quot; pad=&quot;5&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;6&quot; pad=&quot;6&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;&gt;
&lt;attribute name=&quot;PROD_ID&quot; value=&quot;CONN-10681&quot;/&gt;
&lt;attribute name=&quot;SF_ID&quot; value=&quot;PRT_10877&quot; constant=&quot;no&quot;/&gt;
&lt;/technology&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;device name=&quot;FEMALE&quot; package=&quot;2X3&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;1&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;2&quot; pad=&quot;2&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;3&quot; pad=&quot;3&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;4&quot; pad=&quot;4&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;5&quot; pad=&quot;5&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;6&quot; pad=&quot;6&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;&gt;
&lt;attribute name=&quot;PROD_ID&quot; value=&quot;&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; value=&quot;&quot;/&gt;
&lt;/technology&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;device name=&quot;WR-BHD_2X3_RA&quot; package=&quot;WURTH_ELECTRONICS:61200621721&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;1&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;2&quot; pad=&quot;2&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;3&quot; pad=&quot;3&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;4&quot; pad=&quot;4&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;5&quot; pad=&quot;5&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;6&quot; pad=&quot;6&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;/&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;/devices&gt;
&lt;/deviceset&gt;
&lt;deviceset name=&quot;SWITCH-SPST&quot; prefix=&quot;S&quot; uservalue=&quot;yes&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Momentary Switch (Pushbutton) - SPST&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;Normally-open (NO) SPST momentary switches (buttons, pushbuttons).&amp;lt;/p&amp;gt;
&amp;lt;h4&amp;gt;Variants&amp;lt;/h4&amp;gt;

&amp;lt;h5&amp;gt;PTH-12MM - 12mm square, through-hole&amp;lt;/h5&amp;gt;
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/9190&quot;&amp;gt;Momentary Pushbutton Switch - 12mm Square&amp;lt;/a&amp;gt; (COM-09190)&amp;lt;/li&amp;gt;&amp;lt;/ul&amp;gt;

&amp;lt;h5&amp;gt;SMD-12MM - 12mm square, surface-mount&amp;lt;/h5&amp;gt;
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/12993&quot;&amp;gt;Tactile Button - SMD (12mm)&amp;lt;/a&amp;gt; (COM-12993)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Used on &amp;lt;a href=&quot;https://www.sparkfun.com/products/11888&quot;&amp;gt;SparkFun PicoBoard&amp;lt;/a&amp;gt;&amp;lt;/li&amp;gt;&amp;lt;/ul&amp;gt;

&amp;lt;h5&amp;gt;SMD-4.5MM - 4.5mm Square Trackball Switch&amp;lt;/h5&amp;gt;
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;Used on &amp;lt;a href=&quot;https://www.sparkfun.com/products/13169&quot;&amp;gt;SparkFun Blackberry Trackballer Breakout&amp;lt;/a&amp;gt;&amp;lt;/li&amp;gt;&amp;lt;/ul&amp;gt;

&amp;lt;h5&amp;gt;SMD-4.6MMX2.8MM -  4.60mm x 2.80mm, surface mount&amp;lt;/h5&amp;gt;
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;Used on &amp;lt;a href=&quot;https://www.sparkfun.com/products/13664&quot;&amp;gt;SparkFun SAMD21 Mini Breakout&amp;lt;/a&amp;gt;&amp;lt;/li&amp;gt;&amp;lt;/ul&amp;gt;

&amp;lt;h5&amp;gt;SMD-5.2MM, SMD-5.2-REDUNDANT - 5.2mm square, surface-mount&amp;lt;/h5&amp;gt;
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/8720&quot;&amp;gt;Mini Pushbutton Switch - SMD&amp;lt;/a&amp;gt; (COM-08720)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Used on &amp;lt;a href=&quot;https://www.sparkfun.com/products/11114&quot;&amp;gt;Arduino Pro Mini&amp;lt;/a&amp;gt;&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;REDUNDANT package connects both switch circuits together&amp;lt;/li&amp;gt;&amp;lt;/ul&amp;gt;

&amp;lt;h5&amp;gt;SMD-6.0X3.5MM - 6.0 x 3.5mm, surface mount&amp;lt;/h5&amp;gt;
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/8229&quot;&amp;gt;Momentary Reset Switch SMD&amp;lt;/a&amp;gt; (COM-08229)&amp;lt;/li&amp;gt;&amp;lt;/ul&amp;gt;

&amp;lt;h5&amp;gt;SMD-6.2MM-TALL - 6.2mm square, surface mount&amp;lt;/h5&amp;gt;
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/12992&quot;&amp;gt;Tactile Button - SMD (6mm)&amp;lt;/a&amp;gt;&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Used on &amp;lt;a href=&quot;https://www.sparkfun.com/products/12651&quot;&amp;gt;SparkFun Digital Sandbox&amp;lt;/a&amp;gt;&amp;lt;/li&amp;gt;&amp;lt;/ul&amp;gt;

&amp;lt;h5&amp;gt;SMD-RIGHT-ANGLE - Right-angle, surface mount&amp;lt;/h5&amp;gt;
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;Used on &amp;lt;a href=&quot;https://www.sparkfun.com/products/13036&quot;&amp;gt;SparkFun Block for Intel® Edison - Arduino&amp;lt;/a&amp;gt;&amp;lt;/li&amp;gt;&amp;lt;/ul&amp;gt;&lt;/description&gt;
&lt;gates&gt;
&lt;gate name=&quot;G$1&quot; symbol=&quot;SWITCH-MOMENTARY-2&quot; x=&quot;0&quot; y=&quot;0&quot;/&gt;
&lt;/gates&gt;
&lt;devices&gt;
&lt;device name=&quot;-PTH-6.0MM&quot; package=&quot;TACTILE_SWITCH_PTH_6.0MM&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;1&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;2&quot; pad=&quot;3&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;&gt;
&lt;attribute name=&quot;PROD_ID&quot; value=&quot; SWCH-08441&quot;/&gt;
&lt;attribute name=&quot;SF_SKU&quot; value=&quot;COM-00097&quot;/&gt;
&lt;/technology&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;/devices&gt;
&lt;/deviceset&gt;
&lt;deviceset name=&quot;FRAME-LETTER&quot; prefix=&quot;FRAME&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Schematic Frame - Letter&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;Standard 8.5x11 US Letter frame&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;gates&gt;
&lt;gate name=&quot;G$1&quot; symbol=&quot;FRAME-LETTER&quot; x=&quot;0&quot; y=&quot;0&quot;/&gt;
&lt;gate name=&quot;V&quot; symbol=&quot;DOCFIELD&quot; x=&quot;147.32&quot; y=&quot;0&quot; addlevel=&quot;must&quot;/&gt;
&lt;/gates&gt;
&lt;devices&gt;
&lt;device name=&quot;NO_PACKAGE&quot; package=&quot;DUMMY&quot;&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;&gt;
&lt;attribute name=&quot;DESIGNER&quot; value=&quot;Nobody&quot; constant=&quot;no&quot;/&gt;
&lt;attribute name=&quot;VERSION&quot; value=&quot;v01&quot; constant=&quot;no&quot;/&gt;
&lt;/technology&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;/devices&gt;
&lt;/deviceset&gt;
&lt;deviceset name=&quot;PESD1CAN&quot; prefix=&quot;U&quot; uservalue=&quot;yes&quot;&gt;
&lt;gates&gt;
&lt;gate name=&quot;A&quot; symbol=&quot;PESD1CAN&quot; x=&quot;0&quot; y=&quot;0&quot;/&gt;
&lt;/gates&gt;
&lt;devices&gt;
&lt;device name=&quot;&quot; package=&quot;SOT23&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;A&quot; pin=&quot;1&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;A&quot; pin=&quot;2&quot; pad=&quot;2&quot;/&gt;
&lt;connect gate=&quot;A&quot; pin=&quot;3&quot; pad=&quot;3&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;&gt;
&lt;attribute name=&quot;MANUFACTURER_PART_NUMBER&quot; value=&quot;PESD1CAN&quot; constant=&quot;no&quot;/&gt;
&lt;attribute name=&quot;VENDOR&quot; value=&quot;Nexperia&quot; constant=&quot;no&quot;/&gt;
&lt;/technology&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;device name=&quot;SOT23-M&quot; package=&quot;SOT23-M&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;A&quot; pin=&quot;1&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;A&quot; pin=&quot;2&quot; pad=&quot;2&quot;/&gt;
&lt;connect gate=&quot;A&quot; pin=&quot;3&quot; pad=&quot;3&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;&gt;
&lt;attribute name=&quot;MANUFACTURER_PART_NUMBER&quot; value=&quot;PESD1CAN&quot; constant=&quot;no&quot;/&gt;
&lt;attribute name=&quot;VENDOR&quot; value=&quot;Nexperia&quot; constant=&quot;no&quot;/&gt;
&lt;/technology&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;device name=&quot;SOT23-L&quot; package=&quot;SOT23-L&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;A&quot; pin=&quot;1&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;A&quot; pin=&quot;2&quot; pad=&quot;2&quot;/&gt;
&lt;connect gate=&quot;A&quot; pin=&quot;3&quot; pad=&quot;3&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;&gt;
&lt;attribute name=&quot;MANUFACTURER_PART_NUMBER&quot; value=&quot;PESD1CAN&quot; constant=&quot;no&quot;/&gt;
&lt;attribute name=&quot;VENDOR&quot; value=&quot;Nexperia&quot; constant=&quot;no&quot;/&gt;
&lt;/technology&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;/devices&gt;
&lt;/deviceset&gt;
&lt;deviceset name=&quot;MCP2515&quot; prefix=&quot;U&quot; uservalue=&quot;yes&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;CAN controller with SPI interface&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;The MCP2515 controller supercedes the MCP2510 while addressing all errata associated with it.  The two devices are pin compatible, either can be used with this device.
&amp;lt;/p&amp;gt;
&amp;lt;ul&amp;gt;
&amp;lt;li&amp;gt;18-pin package SOIC&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Simple SPI interface to any MCU.  &amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;One-shot mode ensures message transmission is attempted only once&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Databyte filtering&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Start-of-Frame (SOF) output&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Low-power CMOS Technology&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;
&amp;lt;p&amp;gt;&amp;lt;a href=&quot;http://www.sparkfun.com/datasheets/DevTools/Arduino/MCP2515.pdf&quot;&amp;gt;Datasheet&amp;lt;/a&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;h4&amp;gt;SparkFun Products&amp;lt;/h4&amp;gt;
&amp;lt;ul&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/13262&quot;&amp;gt;CAN-BUS Shield&amp;lt;/a&amp;gt; (DEV-13262)&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&lt;/description&gt;
&lt;gates&gt;
&lt;gate name=&quot;G$1&quot; symbol=&quot;MCP2515&quot; x=&quot;-2.54&quot; y=&quot;0&quot;/&gt;
&lt;/gates&gt;
&lt;devices&gt;
&lt;device name=&quot;P&quot; package=&quot;DIP18&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;CLKOUT/SOF&quot; pad=&quot;3&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;CS&quot; pad=&quot;16&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;GND&quot; pad=&quot;9&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;INT&quot; pad=&quot;12&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;OSC1&quot; pad=&quot;8&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;OSC2&quot; pad=&quot;7&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;RESET&quot; pad=&quot;17&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;RX0BF&quot; pad=&quot;11&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;RX1BF&quot; pad=&quot;10&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;RXCAN&quot; pad=&quot;2&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;SCK&quot; pad=&quot;13&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;SI&quot; pad=&quot;14&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;SO&quot; pad=&quot;15&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;TX0RTS&quot; pad=&quot;4&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;TX1RTS&quot; pad=&quot;5&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;TX2RTS&quot; pad=&quot;6&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;TXCAN&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;VCC&quot; pad=&quot;18&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;&gt;
&lt;attribute name=&quot;PROD_ID&quot; value=&quot;NA-XXXXX&quot; constant=&quot;no&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; value=&quot; MCP2515&quot; constant=&quot;no&quot;/&gt;
&lt;/technology&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;/devices&gt;
&lt;/deviceset&gt;
&lt;deviceset name=&quot;MCP2551&quot; prefix=&quot;U&quot; uservalue=&quot;yes&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;MCP2551 High Speed CAN Transceiver&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;High speed CAN transceiver&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;&amp;lt;a href=&quot;http://www.sparkfun.com/datasheets/DevTools/Arduino/MCP2551.pdf&quot;&amp;gt;Datasheet&amp;lt;/a&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;h4&amp;gt;SparkFun Products&amp;lt;/h4&amp;gt;
&amp;lt;ul&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/13262&quot;&amp;gt;CAN-BUS Shield&amp;lt;/a&amp;gt; (DEV-13262)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/9555&quot;&amp;gt;SparkFun OBD-II UART&amp;lt;/a&amp;gt; (WIG-09555)&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&lt;/description&gt;
&lt;gates&gt;
&lt;gate name=&quot;MCP2551&quot; symbol=&quot;MCP2551&quot; x=&quot;-2.54&quot; y=&quot;-2.54&quot;/&gt;
&lt;/gates&gt;
&lt;devices&gt;
&lt;device name=&quot;&quot; package=&quot;PDIP8_300MC&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;MCP2551&quot; pin=&quot;CANH&quot; pad=&quot;7&quot;/&gt;
&lt;connect gate=&quot;MCP2551&quot; pin=&quot;CANL&quot; pad=&quot;6&quot;/&gt;
&lt;connect gate=&quot;MCP2551&quot; pin=&quot;GND&quot; pad=&quot;2&quot;/&gt;
&lt;connect gate=&quot;MCP2551&quot; pin=&quot;RS&quot; pad=&quot;8&quot;/&gt;
&lt;connect gate=&quot;MCP2551&quot; pin=&quot;RXD&quot; pad=&quot;4&quot;/&gt;
&lt;connect gate=&quot;MCP2551&quot; pin=&quot;TXD&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;MCP2551&quot; pin=&quot;VCC&quot; pad=&quot;3&quot;/&gt;
&lt;connect gate=&quot;MCP2551&quot; pin=&quot;VREF&quot; pad=&quot;5&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;&gt;
&lt;attribute name=&quot;VALUE&quot; value=&quot;MCP2551&quot; constant=&quot;no&quot;/&gt;
&lt;/technology&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;/devices&gt;
&lt;/deviceset&gt;
&lt;deviceset name=&quot;ATMEGA328P&quot; prefix=&quot;U&quot; uservalue=&quot;yes&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Atmel 328P&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;Through hole ATMEGA328P&amp;lt;br&amp;gt;
uC used in the Arduino&amp;lt;br&amp;gt;
32kb flash, 1k EEPROM, 2k SRAM&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;&amp;lt;a href=&quot;http://www.sparkfun.com/datasheets/Components/SMD/ATMega328.pdf&quot;&amp;gt;Datasheet&amp;lt;/a&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;h4&amp;gt;SparkFun Products&amp;lt;/h4&amp;gt;
&amp;lt;ul&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/9061&quot;&amp;gt;Storefront component: AVR 28 Pin 20MHz 32K 6A/D - ATMega328P&amp;lt;/a&amp;gt; (COM-09061)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/10547&quot;&amp;gt;SparkFun Simon Says - Through-Hole Soldering Kit&amp;lt;/a&amp;gt; (KIT-10547)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/13708&quot;&amp;gt;SparkFun Learn to Solder - Simon Says&amp;lt;/a&amp;gt; (KIT-13708)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/11734&quot;&amp;gt;SparkFun BigTime Watch Kit&amp;lt;/a&amp;gt; (KIT-11734)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/10930&quot;&amp;gt;SparkFun ClockIt&amp;lt;/a&amp;gt; (KIT-10930)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/10097&quot;&amp;gt;SparkFun Serial Enabled LCD Kit&amp;lt;/a&amp;gt; (LCD-10097)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/12634&quot;&amp;gt;SparkFun Simon Tilts - Through Hole Soldering Kit&amp;lt;/a&amp;gt; (KIT-12634)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/10140&quot;&amp;gt;SparkFun Frequency Counter Kit&amp;lt;/a&amp;gt; (KIT-10140)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/11043&quot;&amp;gt;FabFM Radio Kit&amp;lt;/a&amp;gt; (KIT-11043)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/12037&quot;&amp;gt;SparkFun Binary Blaster Kit&amp;lt;/a&amp;gt; (KIT-12037)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/9236&quot;&amp;gt;SparkFun Metro-Gnome&amp;lt;/a&amp;gt; (KIT-09236)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/10524&quot;&amp;gt;ATmega328 with Arduino Optiboot (Uno)&amp;lt;/a&amp;gt; (DEV-10524)&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&lt;/description&gt;
&lt;gates&gt;
&lt;gate name=&quot;U1&quot; symbol=&quot;ATMEGA328P&quot; x=&quot;0&quot; y=&quot;0&quot;/&gt;
&lt;/gates&gt;
&lt;devices&gt;
&lt;device name=&quot;&quot; package=&quot;DIP28&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;AREF&quot; pad=&quot;21&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;AVCC&quot; pad=&quot;20&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;GND@1&quot; pad=&quot;8&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;GND@2&quot; pad=&quot;22&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;PB0(ICP)&quot; pad=&quot;14&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;PB1(OC1A)&quot; pad=&quot;15&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;PB2(SS/OC1B)&quot; pad=&quot;16&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;PB3(MOSI/OC2)&quot; pad=&quot;17&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;PB4(MISO)&quot; pad=&quot;18&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;PB5(SCK)&quot; pad=&quot;19&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;PB6(XTAL1/TOSC1)&quot; pad=&quot;9&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;PB7(XTAL2/TOSC2)&quot; pad=&quot;10&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;PC0(ADC0)&quot; pad=&quot;23&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;PC1(ADC1)&quot; pad=&quot;24&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;PC2(ADC2)&quot; pad=&quot;25&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;PC3(ADC3)&quot; pad=&quot;26&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;PC4(ADC4/SDA)&quot; pad=&quot;27&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;PC5(ADC5/SCL)&quot; pad=&quot;28&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;PC6(/RESET)&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;PD0(RXD)&quot; pad=&quot;2&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;PD1(TXD)&quot; pad=&quot;3&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;PD2(INT0)&quot; pad=&quot;4&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;PD3(INT1)&quot; pad=&quot;5&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;PD4(XCK/T0)&quot; pad=&quot;6&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;PD5(T1)&quot; pad=&quot;11&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;PD6(AIN0)&quot; pad=&quot;12&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;PD7(AIN1)&quot; pad=&quot;13&quot;/&gt;
&lt;connect gate=&quot;U1&quot; pin=&quot;VCC&quot; pad=&quot;7&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;/&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;/devices&gt;
&lt;/deviceset&gt;
&lt;deviceset name=&quot;JUMPER-SMT_2_NO&quot; prefix=&quot;JP&quot; uservalue=&quot;yes&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Normally open jumper&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;This jumper has two pads in close proximity to each other. Apply solder to close the connection.&amp;lt;/p&amp;gt;

&amp;lt;p&amp;gt;Round pads are easier to solder for beginners, but are a lot larger.&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;SparkFun Product that uses the round pads:
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/12781&quot;&amp;gt;SparkFun EL Sequencer&amp;lt;/a&amp;gt;&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;gates&gt;
&lt;gate name=&quot;G$1&quot; symbol=&quot;SMT-JUMPER_2_NO&quot; x=&quot;0&quot; y=&quot;0&quot;/&gt;
&lt;/gates&gt;
&lt;devices&gt;
&lt;device name=&quot;_SILK&quot; package=&quot;SMT-JUMPER_2_NO_SILK&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;1&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;2&quot; pad=&quot;2&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;/&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;/devices&gt;
&lt;/deviceset&gt;
&lt;deviceset name=&quot;GND&quot; prefix=&quot;GND&quot; uservalue=&quot;yes&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Ground Supply Symbol&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;Generic signal ground supply symbol.&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;gates&gt;
&lt;gate name=&quot;1&quot; symbol=&quot;DGND&quot; x=&quot;0&quot; y=&quot;0&quot;/&gt;
&lt;/gates&gt;
&lt;devices&gt;
&lt;device name=&quot;&quot;&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;/&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;/devices&gt;
&lt;/deviceset&gt;
&lt;deviceset name=&quot;VCC&quot; prefix=&quot;SUPPLY&quot; uservalue=&quot;yes&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;VCC Voltage Supply&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;Positive voltage supply (traditionally for a BJT device, C=collector).&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;gates&gt;
&lt;gate name=&quot;G$1&quot; symbol=&quot;VCC&quot; x=&quot;0&quot; y=&quot;0&quot;/&gt;
&lt;/gates&gt;
&lt;devices&gt;
&lt;device name=&quot;&quot;&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;/&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;/devices&gt;
&lt;/deviceset&gt;
&lt;deviceset name=&quot;CONN_07X2&quot; prefix=&quot;J&quot; uservalue=&quot;yes&quot;&gt;
&lt;gates&gt;
&lt;gate name=&quot;G$1&quot; symbol=&quot;CONN_07X2&quot; x=&quot;0&quot; y=&quot;-2.54&quot;/&gt;
&lt;/gates&gt;
&lt;devices&gt;
&lt;device name=&quot;&quot; package=&quot;2X7-SHROUDED&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;1&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;10&quot; pad=&quot;10&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;11&quot; pad=&quot;11&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;12&quot; pad=&quot;12&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;13&quot; pad=&quot;13&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;14&quot; pad=&quot;14&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;2&quot; pad=&quot;2&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;3&quot; pad=&quot;3&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;4&quot; pad=&quot;4&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;5&quot; pad=&quot;5&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;6&quot; pad=&quot;6&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;7&quot; pad=&quot;7&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;8&quot; pad=&quot;8&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;9&quot; pad=&quot;9&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;/&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;device name=&quot;WR-BHD_2X7_RA&quot; package=&quot;WURTH_ELECTRONICS:61201421721&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;1&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;10&quot; pad=&quot;10&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;11&quot; pad=&quot;11&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;12&quot; pad=&quot;12&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;13&quot; pad=&quot;13&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;14&quot; pad=&quot;14&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;2&quot; pad=&quot;2&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;3&quot; pad=&quot;3&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;4&quot; pad=&quot;4&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;5&quot; pad=&quot;5&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;6&quot; pad=&quot;6&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;7&quot; pad=&quot;7&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;8&quot; pad=&quot;8&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;9&quot; pad=&quot;9&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;/&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;device name=&quot;WR-BHD_2X7&quot; package=&quot;WURTH_ELECTRONICS:61201421621&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;1&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;10&quot; pad=&quot;10&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;11&quot; pad=&quot;11&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;12&quot; pad=&quot;12&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;13&quot; pad=&quot;13&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;14&quot; pad=&quot;14&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;2&quot; pad=&quot;2&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;3&quot; pad=&quot;3&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;4&quot; pad=&quot;4&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;5&quot; pad=&quot;5&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;6&quot; pad=&quot;6&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;7&quot; pad=&quot;7&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;8&quot; pad=&quot;8&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;9&quot; pad=&quot;9&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;/&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;/devices&gt;
&lt;/deviceset&gt;
&lt;/devicesets&gt;
&lt;/library&gt;
&lt;library name=&quot;SparkFun-Connectors&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;SparkFun Connectors&amp;lt;/h3&amp;gt;
This library contains electrically-functional connectors. 
&amp;lt;br&amp;gt;
&amp;lt;br&amp;gt;
We&#039;ve spent an enormous amount of time creating and checking these footprints and parts, but it is &amp;lt;b&amp;gt; the end user&#039;s responsibility&amp;lt;/b&amp;gt; to ensure correctness and suitablity for a given componet or application. 
&amp;lt;br&amp;gt;
&amp;lt;br&amp;gt;If you enjoy using this library, please buy one of our products at &amp;lt;a href=&quot; www.sparkfun.com&quot;&amp;gt;SparkFun.com&amp;lt;/a&amp;gt;.
&amp;lt;br&amp;gt;
&amp;lt;br&amp;gt;
&amp;lt;b&amp;gt;Licensing:&amp;lt;/b&amp;gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&amp;lt;br&amp;gt;
&amp;lt;br&amp;gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.&lt;/description&gt;
&lt;packages&gt;
&lt;package name=&quot;2X3-SHROUDED&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Plated Through Hole - 2x3 Shrouded Header&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;Specifications:
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;Pin count:6&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Pin pitch:0.1&quot;&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;&amp;lt;a href=”https://www.sparkfun.com/datasheets/Prototyping/Shrouded-10pin.pdf”&amp;gt;Datasheet referenced for footprint&amp;lt;/a&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;Example device(s):
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;CONN_03x2&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;wire x1=&quot;4.5&quot; y1=&quot;7.56&quot; x2=&quot;4.5&quot; y2=&quot;-7.56&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-4.5&quot; y1=&quot;-7.56&quot; x2=&quot;-4.5&quot; y2=&quot;-2.2&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-4.5&quot; y1=&quot;-2.2&quot; x2=&quot;-4.5&quot; y2=&quot;2.2&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-4.5&quot; y1=&quot;2.2&quot; x2=&quot;-4.5&quot; y2=&quot;7.56&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-4.5&quot; y1=&quot;7.56&quot; x2=&quot;4.4&quot; y2=&quot;7.56&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;4.5&quot; y1=&quot;-7.56&quot; x2=&quot;-4.5&quot; y2=&quot;-7.56&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-3.4&quot; y1=&quot;6.46&quot; x2=&quot;3.4&quot; y2=&quot;6.46&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;3.4&quot; y1=&quot;6.46&quot; x2=&quot;3.4&quot; y2=&quot;-6.46&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-3.4&quot; y1=&quot;-6.46&quot; x2=&quot;3.4&quot; y2=&quot;-6.46&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-4.5&quot; y1=&quot;2.2&quot; x2=&quot;-3&quot; y2=&quot;2.2&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-3&quot; y1=&quot;2.2&quot; x2=&quot;-3&quot; y2=&quot;-2.2&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-3&quot; y1=&quot;-2.2&quot; x2=&quot;-4.5&quot; y2=&quot;-2.2&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-3.4&quot; y1=&quot;6.46&quot; x2=&quot;-3.4&quot; y2=&quot;2.2&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-3.4&quot; y1=&quot;-6.46&quot; x2=&quot;-3.4&quot; y2=&quot;-2.2&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;pad name=&quot;1&quot; x=&quot;-1.27&quot; y=&quot;2.54&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;pad name=&quot;2&quot; x=&quot;1.27&quot; y=&quot;2.54&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;pad name=&quot;3&quot; x=&quot;-1.27&quot; y=&quot;0&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;pad name=&quot;4&quot; x=&quot;1.27&quot; y=&quot;0&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;pad name=&quot;5&quot; x=&quot;-1.27&quot; y=&quot;-2.54&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;pad name=&quot;6&quot; x=&quot;1.27&quot; y=&quot;-2.54&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot; rot=&quot;R270&quot;/&gt;
&lt;rectangle x1=&quot;1.016&quot; y1=&quot;2.286&quot; x2=&quot;1.524&quot; y2=&quot;2.794&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.524&quot; y1=&quot;2.286&quot; x2=&quot;-1.016&quot; y2=&quot;2.794&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;1.016&quot; y1=&quot;-0.254&quot; x2=&quot;1.524&quot; y2=&quot;0.254&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.524&quot; y1=&quot;-0.254&quot; x2=&quot;-1.016&quot; y2=&quot;0.254&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;1.016&quot; y1=&quot;-2.794&quot; x2=&quot;1.524&quot; y2=&quot;-2.286&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.524&quot; y1=&quot;-2.794&quot; x2=&quot;-1.016&quot; y2=&quot;-2.286&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-1.524&quot; y1=&quot;-2.794&quot; x2=&quot;-1.016&quot; y2=&quot;-2.286&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;1.016&quot; y1=&quot;-2.794&quot; x2=&quot;1.524&quot; y2=&quot;-2.286&quot; layer=&quot;51&quot;/&gt;
&lt;text x=&quot;-3.81&quot; y=&quot;7.874&quot; size=&quot;0.6096&quot; layer=&quot;25&quot; font=&quot;vector&quot; ratio=&quot;20&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;-3.81&quot; y=&quot;-8.382&quot; size=&quot;0.6096&quot; layer=&quot;27&quot; font=&quot;vector&quot; ratio=&quot;20&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;wire x1=&quot;-2.648&quot; y1=&quot;3.175&quot; x2=&quot;-2.648&quot; y2=&quot;1.905&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-2.686&quot; y1=&quot;3.175&quot; x2=&quot;-2.686&quot; y2=&quot;1.905&quot; width=&quot;0.2032&quot; layer=&quot;22&quot;/&gt;
&lt;/package&gt;
&lt;package name=&quot;2X3_SMT_POSTS&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Surface Mount - 2x3 Male Header with Keying Posts&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;Specifications:
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;Pin count:6&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Pin pitch:0.1&quot;&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;&amp;lt;a href=”http://www.4uconnector.com/online/object/4udrawing/15881.pdf”&amp;gt;Datasheet referenced for footprint&amp;lt;/a&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;Example device(s):
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;CONN_03x2&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;hole x=&quot;-1.27&quot; y=&quot;0&quot; drill=&quot;1.8&quot;/&gt;
&lt;hole x=&quot;1.27&quot; y=&quot;0&quot; drill=&quot;1.8&quot;/&gt;
&lt;smd name=&quot;4&quot; x=&quot;0&quot; y=&quot;2.54&quot; dx=&quot;3.17&quot; dy=&quot;1&quot; layer=&quot;1&quot; rot=&quot;R90&quot;/&gt;
&lt;smd name=&quot;3&quot; x=&quot;0&quot; y=&quot;-2.54&quot; dx=&quot;3.17&quot; dy=&quot;1&quot; layer=&quot;1&quot; rot=&quot;R90&quot;/&gt;
&lt;smd name=&quot;5&quot; x=&quot;2.54&quot; y=&quot;-2.54&quot; dx=&quot;3.17&quot; dy=&quot;1&quot; layer=&quot;1&quot; rot=&quot;R90&quot;/&gt;
&lt;smd name=&quot;6&quot; x=&quot;2.54&quot; y=&quot;2.54&quot; dx=&quot;3.17&quot; dy=&quot;1&quot; layer=&quot;1&quot; rot=&quot;R90&quot;/&gt;
&lt;smd name=&quot;2&quot; x=&quot;-2.54&quot; y=&quot;2.54&quot; dx=&quot;3.17&quot; dy=&quot;1&quot; layer=&quot;1&quot; rot=&quot;R90&quot;/&gt;
&lt;smd name=&quot;1&quot; x=&quot;-2.54&quot; y=&quot;-2.54&quot; dx=&quot;3.17&quot; dy=&quot;1&quot; layer=&quot;1&quot; rot=&quot;R90&quot;/&gt;
&lt;wire x1=&quot;-1.778&quot; y1=&quot;2.54&quot; x2=&quot;-0.762&quot; y2=&quot;2.54&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;0.762&quot; y1=&quot;2.54&quot; x2=&quot;1.778&quot; y2=&quot;2.54&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-1.778&quot; y1=&quot;-2.54&quot; x2=&quot;-0.889&quot; y2=&quot;-2.54&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;0.762&quot; y1=&quot;-2.54&quot; x2=&quot;1.778&quot; y2=&quot;-2.54&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-3.175&quot; y1=&quot;2.54&quot; x2=&quot;-3.81&quot; y2=&quot;2.54&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-3.81&quot; y1=&quot;2.54&quot; x2=&quot;-3.81&quot; y2=&quot;-2.54&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-3.81&quot; y1=&quot;-2.54&quot; x2=&quot;-3.175&quot; y2=&quot;-2.54&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3.175&quot; y1=&quot;2.54&quot; x2=&quot;3.81&quot; y2=&quot;2.54&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3.81&quot; y1=&quot;2.54&quot; x2=&quot;3.81&quot; y2=&quot;-2.54&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3.81&quot; y1=&quot;-2.54&quot; x2=&quot;3.175&quot; y2=&quot;-2.54&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-3.429&quot; y1=&quot;-4.064&quot; x2=&quot;-3.429&quot; y2=&quot;-2.794&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;text x=&quot;-1.397&quot; y=&quot;4.445&quot; size=&quot;0.6096&quot; layer=&quot;25&quot; font=&quot;vector&quot; ratio=&quot;20&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;-1.778&quot; y=&quot;-5.08&quot; size=&quot;0.6096&quot; layer=&quot;27&quot; font=&quot;vector&quot; ratio=&quot;20&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;/package&gt;
&lt;package name=&quot;2X3_POGO&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Plated Through Hole - 2x3 Pogo Pins&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;Specifications:
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;Pin count:6&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Pin pitch:0.1&quot;&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;Example device(s):
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;CONN_03x2&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;pad name=&quot;P$1&quot; x=&quot;0&quot; y=&quot;0&quot; drill=&quot;1.2&quot; diameter=&quot;1.8288&quot;/&gt;
&lt;pad name=&quot;P$3&quot; x=&quot;2.54&quot; y=&quot;0&quot; drill=&quot;1.2&quot; diameter=&quot;1.8288&quot;/&gt;
&lt;pad name=&quot;P$5&quot; x=&quot;5.08&quot; y=&quot;0&quot; drill=&quot;1.2&quot; diameter=&quot;1.8288&quot;/&gt;
&lt;pad name=&quot;P$6&quot; x=&quot;5.08&quot; y=&quot;2.54&quot; drill=&quot;1.2&quot; diameter=&quot;1.8288&quot;/&gt;
&lt;pad name=&quot;P$4&quot; x=&quot;2.54&quot; y=&quot;2.54&quot; drill=&quot;1.2&quot; diameter=&quot;1.8288&quot;/&gt;
&lt;pad name=&quot;P$2&quot; x=&quot;0&quot; y=&quot;2.54&quot; drill=&quot;1.2&quot; diameter=&quot;1.8288&quot;/&gt;
&lt;wire x1=&quot;-0.635&quot; y1=&quot;1.27&quot; x2=&quot;-1.27&quot; y2=&quot;1.905&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;1.905&quot; x2=&quot;-1.27&quot; y2=&quot;3.175&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;3.175&quot; x2=&quot;-0.635&quot; y2=&quot;3.81&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-0.635&quot; y1=&quot;3.81&quot; x2=&quot;0.635&quot; y2=&quot;3.81&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;0.635&quot; y1=&quot;3.81&quot; x2=&quot;1.27&quot; y2=&quot;3.175&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;3.175&quot; x2=&quot;1.905&quot; y2=&quot;3.81&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.905&quot; y1=&quot;3.81&quot; x2=&quot;3.175&quot; y2=&quot;3.81&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3.175&quot; y1=&quot;3.81&quot; x2=&quot;3.81&quot; y2=&quot;3.175&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3.81&quot; y1=&quot;3.175&quot; x2=&quot;4.445&quot; y2=&quot;3.81&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;4.445&quot; y1=&quot;3.81&quot; x2=&quot;5.715&quot; y2=&quot;3.81&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;5.715&quot; y1=&quot;3.81&quot; x2=&quot;6.35&quot; y2=&quot;3.175&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;6.35&quot; y1=&quot;3.175&quot; x2=&quot;6.35&quot; y2=&quot;1.905&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;6.35&quot; y1=&quot;1.905&quot; x2=&quot;5.715&quot; y2=&quot;1.27&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;5.715&quot; y1=&quot;1.27&quot; x2=&quot;6.35&quot; y2=&quot;0.635&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;6.35&quot; y1=&quot;0.635&quot; x2=&quot;6.35&quot; y2=&quot;-0.635&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;6.35&quot; y1=&quot;-0.635&quot; x2=&quot;5.715&quot; y2=&quot;-1.27&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;5.715&quot; y1=&quot;-1.27&quot; x2=&quot;4.445&quot; y2=&quot;-1.27&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;4.445&quot; y1=&quot;-1.27&quot; x2=&quot;3.81&quot; y2=&quot;-0.635&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3.81&quot; y1=&quot;-0.635&quot; x2=&quot;3.175&quot; y2=&quot;-1.27&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3.175&quot; y1=&quot;-1.27&quot; x2=&quot;1.905&quot; y2=&quot;-1.27&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.905&quot; y1=&quot;-1.27&quot; x2=&quot;1.27&quot; y2=&quot;-0.635&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;-0.635&quot; x2=&quot;0.635&quot; y2=&quot;-1.27&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;0.635&quot; y1=&quot;-1.27&quot; x2=&quot;-0.635&quot; y2=&quot;-1.27&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-0.635&quot; y1=&quot;-1.27&quot; x2=&quot;-1.27&quot; y2=&quot;-0.635&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;-0.635&quot; x2=&quot;-1.27&quot; y2=&quot;0.635&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;0.635&quot; x2=&quot;-0.635&quot; y2=&quot;1.27&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;2.54&quot; x2=&quot;1.27&quot; y2=&quot;0&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3.81&quot; y1=&quot;2.54&quot; x2=&quot;3.81&quot; y2=&quot;0&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-0.635&quot; y1=&quot;-1.651&quot; x2=&quot;0.635&quot; y2=&quot;-1.651&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;-0.635&quot; x2=&quot;-0.635&quot; y2=&quot;-1.27&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;3.175&quot; x2=&quot;-0.635&quot; y2=&quot;3.81&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;text x=&quot;-1.27&quot; y=&quot;4.064&quot; size=&quot;0.6096&quot; layer=&quot;25&quot; font=&quot;vector&quot; ratio=&quot;20&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;-1.27&quot; y=&quot;-2.413&quot; size=&quot;0.6096&quot; layer=&quot;27&quot; font=&quot;vector&quot; ratio=&quot;20&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;wire x1=&quot;0.635&quot; y1=&quot;-1.651&quot; x2=&quot;-0.635&quot; y2=&quot;-1.651&quot; width=&quot;0.2032&quot; layer=&quot;22&quot;/&gt;
&lt;/package&gt;
&lt;package name=&quot;2X3&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Plated Through Hole - 2x3&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;Specifications:
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;Pin count:6&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Pin pitch:0.1&quot;&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;Example device(s):
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;CONN_03x2&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;-0.635&quot; x2=&quot;-0.635&quot; y2=&quot;-1.27&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;0.635&quot; y1=&quot;-1.27&quot; x2=&quot;1.27&quot; y2=&quot;-0.635&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;-0.635&quot; x2=&quot;1.905&quot; y2=&quot;-1.27&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3.175&quot; y1=&quot;-1.27&quot; x2=&quot;3.81&quot; y2=&quot;-0.635&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3.81&quot; y1=&quot;-0.635&quot; x2=&quot;4.445&quot; y2=&quot;-1.27&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;5.715&quot; y1=&quot;-1.27&quot; x2=&quot;6.35&quot; y2=&quot;-0.635&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;-0.635&quot; x2=&quot;-1.27&quot; y2=&quot;3.175&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;3.175&quot; x2=&quot;-0.635&quot; y2=&quot;3.81&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-0.635&quot; y1=&quot;3.81&quot; x2=&quot;0.635&quot; y2=&quot;3.81&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;0.635&quot; y1=&quot;3.81&quot; x2=&quot;1.27&quot; y2=&quot;3.175&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;3.175&quot; x2=&quot;1.905&quot; y2=&quot;3.81&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.905&quot; y1=&quot;3.81&quot; x2=&quot;3.175&quot; y2=&quot;3.81&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3.175&quot; y1=&quot;3.81&quot; x2=&quot;3.81&quot; y2=&quot;3.175&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3.81&quot; y1=&quot;3.175&quot; x2=&quot;4.445&quot; y2=&quot;3.81&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;4.445&quot; y1=&quot;3.81&quot; x2=&quot;5.715&quot; y2=&quot;3.81&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;5.715&quot; y1=&quot;3.81&quot; x2=&quot;6.35&quot; y2=&quot;3.175&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;3.175&quot; x2=&quot;1.27&quot; y2=&quot;-0.635&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;3.81&quot; y1=&quot;3.175&quot; x2=&quot;3.81&quot; y2=&quot;-0.635&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;6.35&quot; y1=&quot;3.175&quot; x2=&quot;6.35&quot; y2=&quot;-0.635&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;4.445&quot; y1=&quot;-1.27&quot; x2=&quot;5.715&quot; y2=&quot;-1.27&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;1.905&quot; y1=&quot;-1.27&quot; x2=&quot;3.175&quot; y2=&quot;-1.27&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-0.635&quot; y1=&quot;-1.27&quot; x2=&quot;0.635&quot; y2=&quot;-1.27&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;0.635&quot; y1=&quot;-1.605&quot; x2=&quot;-0.635&quot; y2=&quot;-1.605&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;pad name=&quot;1&quot; x=&quot;0&quot; y=&quot;0&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;pad name=&quot;2&quot; x=&quot;0&quot; y=&quot;2.54&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;pad name=&quot;3&quot; x=&quot;2.54&quot; y=&quot;0&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;pad name=&quot;4&quot; x=&quot;2.54&quot; y=&quot;2.54&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;pad name=&quot;5&quot; x=&quot;5.08&quot; y=&quot;0&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;pad name=&quot;6&quot; x=&quot;5.08&quot; y=&quot;2.54&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;text x=&quot;-1.27&quot; y=&quot;4.064&quot; size=&quot;0.6096&quot; layer=&quot;25&quot; font=&quot;vector&quot; ratio=&quot;20&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;-1.27&quot; y=&quot;-2.413&quot; size=&quot;0.6096&quot; layer=&quot;27&quot; font=&quot;vector&quot; ratio=&quot;20&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;rectangle x1=&quot;-0.254&quot; y1=&quot;-0.254&quot; x2=&quot;0.254&quot; y2=&quot;0.254&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-0.254&quot; y1=&quot;2.286&quot; x2=&quot;0.254&quot; y2=&quot;2.794&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;2.286&quot; y1=&quot;2.286&quot; x2=&quot;2.794&quot; y2=&quot;2.794&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;2.286&quot; y1=&quot;-0.254&quot; x2=&quot;2.794&quot; y2=&quot;0.254&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;4.826&quot; y1=&quot;2.286&quot; x2=&quot;5.334&quot; y2=&quot;2.794&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;4.826&quot; y1=&quot;-0.254&quot; x2=&quot;5.334&quot; y2=&quot;0.254&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-0.635&quot; y1=&quot;-1.605&quot; x2=&quot;0.635&quot; y2=&quot;-1.605&quot; width=&quot;0.2032&quot; layer=&quot;22&quot;/&gt;
&lt;/package&gt;
&lt;package name=&quot;2X3-NS&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Plated Through Hole - 2x3 No Silk Outline&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;Specifications:
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;Pin count:6&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Pin pitch:0.1&quot;&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;Example device(s):
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;CONN_03x2&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;wire x1=&quot;-3.81&quot; y1=&quot;-1.905&quot; x2=&quot;-3.175&quot; y2=&quot;-2.54&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.905&quot; y1=&quot;-2.54&quot; x2=&quot;-1.27&quot; y2=&quot;-1.905&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;-1.905&quot; x2=&quot;-0.635&quot; y2=&quot;-2.54&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;0.635&quot; y1=&quot;-2.54&quot; x2=&quot;1.27&quot; y2=&quot;-1.905&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;-1.905&quot; x2=&quot;1.905&quot; y2=&quot;-2.54&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;3.175&quot; y1=&quot;-2.54&quot; x2=&quot;3.81&quot; y2=&quot;-1.905&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-3.81&quot; y1=&quot;-1.905&quot; x2=&quot;-3.81&quot; y2=&quot;1.905&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-3.81&quot; y1=&quot;1.905&quot; x2=&quot;-3.175&quot; y2=&quot;2.54&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-3.175&quot; y1=&quot;2.54&quot; x2=&quot;-1.905&quot; y2=&quot;2.54&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.905&quot; y1=&quot;2.54&quot; x2=&quot;-1.27&quot; y2=&quot;1.905&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;1.905&quot; x2=&quot;-0.635&quot; y2=&quot;2.54&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-0.635&quot; y1=&quot;2.54&quot; x2=&quot;0.635&quot; y2=&quot;2.54&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;0.635&quot; y1=&quot;2.54&quot; x2=&quot;1.27&quot; y2=&quot;1.905&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;1.905&quot; x2=&quot;1.905&quot; y2=&quot;2.54&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;1.905&quot; y1=&quot;2.54&quot; x2=&quot;3.175&quot; y2=&quot;2.54&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;3.175&quot; y1=&quot;2.54&quot; x2=&quot;3.81&quot; y2=&quot;1.905&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;1.905&quot; x2=&quot;-1.27&quot; y2=&quot;-1.905&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;1.905&quot; x2=&quot;1.27&quot; y2=&quot;-1.905&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;3.81&quot; y1=&quot;1.905&quot; x2=&quot;3.81&quot; y2=&quot;-1.905&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;1.905&quot; y1=&quot;-2.54&quot; x2=&quot;3.175&quot; y2=&quot;-2.54&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-0.635&quot; y1=&quot;-2.54&quot; x2=&quot;0.635&quot; y2=&quot;-2.54&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-3.175&quot; y1=&quot;-2.54&quot; x2=&quot;-1.905&quot; y2=&quot;-2.54&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.905&quot; y1=&quot;-2.875&quot; x2=&quot;-3.175&quot; y2=&quot;-2.875&quot; width=&quot;0.2032&quot; layer=&quot;51&quot;/&gt;
&lt;pad name=&quot;1&quot; x=&quot;-2.54&quot; y=&quot;-1.27&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;pad name=&quot;2&quot; x=&quot;-2.54&quot; y=&quot;1.27&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;pad name=&quot;3&quot; x=&quot;0&quot; y=&quot;-1.27&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;pad name=&quot;4&quot; x=&quot;0&quot; y=&quot;1.27&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;pad name=&quot;5&quot; x=&quot;2.54&quot; y=&quot;-1.27&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;pad name=&quot;6&quot; x=&quot;2.54&quot; y=&quot;1.27&quot; drill=&quot;1.016&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;rectangle x1=&quot;-2.794&quot; y1=&quot;-1.524&quot; x2=&quot;-2.286&quot; y2=&quot;-1.016&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-2.794&quot; y1=&quot;1.016&quot; x2=&quot;-2.286&quot; y2=&quot;1.524&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-0.254&quot; y1=&quot;1.016&quot; x2=&quot;0.254&quot; y2=&quot;1.524&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-0.254&quot; y1=&quot;-1.524&quot; x2=&quot;0.254&quot; y2=&quot;-1.016&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;2.286&quot; y1=&quot;1.016&quot; x2=&quot;2.794&quot; y2=&quot;1.524&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;2.286&quot; y1=&quot;-1.524&quot; x2=&quot;2.794&quot; y2=&quot;-1.016&quot; layer=&quot;51&quot;/&gt;
&lt;text x=&quot;-3.81&quot; y=&quot;2.667&quot; size=&quot;0.6096&quot; layer=&quot;25&quot; font=&quot;vector&quot; ratio=&quot;20&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;-3.81&quot; y=&quot;-3.937&quot; size=&quot;0.6096&quot; layer=&quot;27&quot; font=&quot;vector&quot; ratio=&quot;20&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;/package&gt;
&lt;package name=&quot;2X3_SMD&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Surface Mount - 2x3&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;Specifications:
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;Pin count:6&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;Pin pitch:2.54mm&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;Example device(s):
&amp;lt;ul&amp;gt;&amp;lt;li&amp;gt;CONN_03x2&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;circle x=&quot;0&quot; y=&quot;1.27&quot; radius=&quot;0.7&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;circle x=&quot;-2.54&quot; y=&quot;1.27&quot; radius=&quot;0.7&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;circle x=&quot;-2.54&quot; y=&quot;-1.27&quot; radius=&quot;0.7&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;circle x=&quot;0&quot; y=&quot;-1.27&quot; radius=&quot;0.7&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;circle x=&quot;2.54&quot; y=&quot;-1.27&quot; radius=&quot;0.7&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;circle x=&quot;2.54&quot; y=&quot;1.27&quot; radius=&quot;0.7&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-3.81&quot; y1=&quot;-2.5&quot; x2=&quot;-3.81&quot; y2=&quot;2.5&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-3.81&quot; y1=&quot;2.5&quot; x2=&quot;3.81&quot; y2=&quot;2.5&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;3.81&quot; y1=&quot;2.5&quot; x2=&quot;3.81&quot; y2=&quot;-2.5&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;3.81&quot; y1=&quot;-2.5&quot; x2=&quot;-3.81&quot; y2=&quot;-2.5&quot; width=&quot;0.127&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-0.3&quot; y1=&quot;2.55&quot; x2=&quot;0.3&quot; y2=&quot;3.35&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-2.84&quot; y1=&quot;2.55&quot; x2=&quot;-2.24&quot; y2=&quot;3.35&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;2.24&quot; y1=&quot;2.55&quot; x2=&quot;2.84&quot; y2=&quot;3.35&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;-2.84&quot; y1=&quot;-3.35&quot; x2=&quot;-2.24&quot; y2=&quot;-2.55&quot; layer=&quot;51&quot; rot=&quot;R180&quot;/&gt;
&lt;rectangle x1=&quot;-0.3&quot; y1=&quot;-3.35&quot; x2=&quot;0.3&quot; y2=&quot;-2.55&quot; layer=&quot;51&quot; rot=&quot;R180&quot;/&gt;
&lt;rectangle x1=&quot;2.24&quot; y1=&quot;-3.35&quot; x2=&quot;2.84&quot; y2=&quot;-2.55&quot; layer=&quot;51&quot; rot=&quot;R180&quot;/&gt;
&lt;smd name=&quot;1&quot; x=&quot;-2.54&quot; y=&quot;-2.85&quot; dx=&quot;1.02&quot; dy=&quot;1.9&quot; layer=&quot;1&quot;/&gt;
&lt;smd name=&quot;2&quot; x=&quot;-2.54&quot; y=&quot;2.85&quot; dx=&quot;1.02&quot; dy=&quot;1.9&quot; layer=&quot;1&quot;/&gt;
&lt;smd name=&quot;3&quot; x=&quot;0&quot; y=&quot;-2.85&quot; dx=&quot;1.02&quot; dy=&quot;1.9&quot; layer=&quot;1&quot;/&gt;
&lt;smd name=&quot;4&quot; x=&quot;0&quot; y=&quot;2.85&quot; dx=&quot;1.02&quot; dy=&quot;1.9&quot; layer=&quot;1&quot;/&gt;
&lt;smd name=&quot;5&quot; x=&quot;2.54&quot; y=&quot;-2.85&quot; dx=&quot;1.02&quot; dy=&quot;1.9&quot; layer=&quot;1&quot;/&gt;
&lt;smd name=&quot;6&quot; x=&quot;2.54&quot; y=&quot;2.85&quot; dx=&quot;1.02&quot; dy=&quot;1.9&quot; layer=&quot;1&quot;/&gt;
&lt;text x=&quot;-1.397&quot; y=&quot;4.191&quot; size=&quot;0.6096&quot; layer=&quot;25&quot; font=&quot;vector&quot; ratio=&quot;20&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;-1.778&quot; y=&quot;-4.826&quot; size=&quot;0.6096&quot; layer=&quot;27&quot; font=&quot;vector&quot; ratio=&quot;20&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;wire x1=&quot;-3.302&quot; y1=&quot;-3.683&quot; x2=&quot;-3.302&quot; y2=&quot;-2.794&quot; width=&quot;0.127&quot; layer=&quot;21&quot;/&gt;
&lt;/package&gt;
&lt;/packages&gt;
&lt;symbols&gt;
&lt;symbol name=&quot;CONN_03X2&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;6 Pin Connection&amp;lt;/h3&amp;gt;
3x2 pin layout&lt;/description&gt;
&lt;pin name=&quot;1&quot; x=&quot;-7.62&quot; y=&quot;2.54&quot; visible=&quot;pad&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;3&quot; x=&quot;-7.62&quot; y=&quot;0&quot; visible=&quot;pad&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;5&quot; x=&quot;-7.62&quot; y=&quot;-2.54&quot; visible=&quot;pad&quot; length=&quot;middle&quot;/&gt;
&lt;pin name=&quot;6&quot; x=&quot;7.62&quot; y=&quot;-2.54&quot; visible=&quot;pad&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;4&quot; x=&quot;7.62&quot; y=&quot;0&quot; visible=&quot;pad&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;2&quot; x=&quot;7.62&quot; y=&quot;2.54&quot; visible=&quot;pad&quot; length=&quot;middle&quot; rot=&quot;R180&quot;/&gt;
&lt;text x=&quot;-3.556&quot; y=&quot;5.588&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;-3.302&quot; y=&quot;-5.842&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-left&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;-2.54&quot; x2=&quot;-2.54&quot; y2=&quot;-2.54&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;0&quot; x2=&quot;-2.54&quot; y2=&quot;0&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-1.27&quot; y1=&quot;2.54&quot; x2=&quot;-2.54&quot; y2=&quot;2.54&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-3.81&quot; y1=&quot;5.08&quot; x2=&quot;-3.81&quot; y2=&quot;-5.08&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;3.81&quot; y1=&quot;-5.08&quot; x2=&quot;-3.81&quot; y2=&quot;-5.08&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;3.81&quot; y1=&quot;-5.08&quot; x2=&quot;3.81&quot; y2=&quot;5.08&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-3.81&quot; y1=&quot;5.08&quot; x2=&quot;3.81&quot; y2=&quot;5.08&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;-2.54&quot; x2=&quot;2.54&quot; y2=&quot;-2.54&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;0&quot; x2=&quot;2.54&quot; y2=&quot;0&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;1.27&quot; y1=&quot;2.54&quot; x2=&quot;2.54&quot; y2=&quot;2.54&quot; width=&quot;0.6096&quot; layer=&quot;94&quot;/&gt;
&lt;/symbol&gt;
&lt;/symbols&gt;
&lt;devicesets&gt;
&lt;deviceset name=&quot;CONN_03X2&quot; prefix=&quot;J&quot; uservalue=&quot;yes&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections&amp;lt;/h3&amp;gt;

&amp;lt;p&amp;gt;&amp;lt;/p&amp;gt;

&amp;lt;p&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;b&amp;gt;You can populate with any combo of single row headers, but if you&#039;d like an exact match, check these:&amp;lt;/b&amp;gt;
&amp;lt;ul&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/12807&quot;&amp;gt; Header - 2x3 (Male, 0.1&quot;)&amp;lt;/a&amp;gt; (PRT-12807)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/13010&quot;&amp;gt; Header - 2x3 (Female, 0.1&quot;)&amp;lt;/a&amp;gt; (PRT-13010)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/10877&quot;&amp;gt; 2x3 Pin Shrouded Header&amp;lt;/a&amp;gt; (PRT-10877)&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;

&amp;lt;p&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;b&amp;gt;On any of the 0.1 inch spaced packages, you can populate with these:&amp;lt;/b&amp;gt;
&amp;lt;ul&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/116&quot;&amp;gt; Break Away Headers - Straight&amp;lt;/a&amp;gt; (PRT-00116)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/553&quot;&amp;gt; Break Away Male Headers - Right Angle&amp;lt;/a&amp;gt; (PRT-00553)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/115&quot;&amp;gt; Female Headers&amp;lt;/a&amp;gt; (PRT-00115)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/117&quot;&amp;gt; Break Away Headers - Machine Pin&amp;lt;/a&amp;gt; (PRT-00117)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/743&quot;&amp;gt; Break Away Female Headers - Swiss Machine Pin&amp;lt;/a&amp;gt; (PRT-00743)&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;

&amp;lt;p&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;b&amp;gt;Special note: the shrouded connector mates well with our 3x2 ribbon cables:&amp;lt;/b&amp;gt;
&amp;lt;ul&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/10651&quot;&amp;gt; Ribbon Crimp Connector - 6-pin (2x3, Female)&amp;lt;/a&amp;gt; (PRT-10651)&amp;lt;/li&amp;gt;
&amp;lt;li&amp;gt;&amp;lt;a href=&quot;https://www.sparkfun.com/products/10646&quot;&amp;gt; Ribbon Cable - 6 wire (15ft)&amp;lt;/a&amp;gt; (PRT-10646)&amp;lt;/li&amp;gt;
&amp;lt;/ul&amp;gt;&lt;/description&gt;
&lt;gates&gt;
&lt;gate name=&quot;G$1&quot; symbol=&quot;CONN_03X2&quot; x=&quot;0&quot; y=&quot;0&quot;/&gt;
&lt;/gates&gt;
&lt;devices&gt;
&lt;device name=&quot;SHROUD&quot; package=&quot;2X3-SHROUDED&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;1&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;2&quot; pad=&quot;2&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;3&quot; pad=&quot;3&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;4&quot; pad=&quot;4&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;5&quot; pad=&quot;5&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;6&quot; pad=&quot;6&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;&gt;
&lt;attribute name=&quot;PROD_ID&quot; value=&quot;CONN-10681&quot;/&gt;
&lt;attribute name=&quot;SF_ID&quot; value=&quot;PRT_10877&quot; constant=&quot;no&quot;/&gt;
&lt;/technology&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;device name=&quot;SMT&quot; package=&quot;2X3_SMT_POSTS&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;1&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;2&quot; pad=&quot;2&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;3&quot; pad=&quot;3&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;4&quot; pad=&quot;4&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;5&quot; pad=&quot;5&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;6&quot; pad=&quot;6&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;&gt;
&lt;attribute name=&quot;PROD_ID&quot; value=&quot;CONN-11415&quot;/&gt;
&lt;/technology&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;device name=&quot;POGO_PINS&quot; package=&quot;2X3_POGO&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;1&quot; pad=&quot;P$1&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;2&quot; pad=&quot;P$2&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;3&quot; pad=&quot;P$3&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;4&quot; pad=&quot;P$4&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;5&quot; pad=&quot;P$5&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;6&quot; pad=&quot;P$6&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;&gt;
&lt;attribute name=&quot;PROD_ID&quot; value=&quot;HW-11044&quot;/&gt;
&lt;/technology&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;device name=&quot;2X3_SILK_MALE_PTH&quot; package=&quot;2X3&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;1&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;2&quot; pad=&quot;2&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;3&quot; pad=&quot;3&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;4&quot; pad=&quot;4&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;5&quot; pad=&quot;5&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;6&quot; pad=&quot;6&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;&gt;
&lt;attribute name=&quot;PROD_ID&quot; value=&quot;CONN-09701&quot;/&gt;
&lt;/technology&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;device name=&quot;NO_SILK&quot; package=&quot;2X3-NS&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;1&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;2&quot; pad=&quot;2&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;3&quot; pad=&quot;3&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;4&quot; pad=&quot;4&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;5&quot; pad=&quot;5&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;6&quot; pad=&quot;6&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;/&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;device name=&quot;FEMALE_SMD&quot; package=&quot;2X3_SMD&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;1&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;2&quot; pad=&quot;2&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;3&quot; pad=&quot;3&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;4&quot; pad=&quot;4&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;5&quot; pad=&quot;5&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;6&quot; pad=&quot;6&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;&gt;
&lt;attribute name=&quot;PROD_ID&quot; value=&quot;CONN-11290&quot;/&gt;
&lt;/technology&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;device name=&quot;FEMALE&quot; package=&quot;2X3&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;1&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;2&quot; pad=&quot;2&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;3&quot; pad=&quot;3&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;4&quot; pad=&quot;4&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;5&quot; pad=&quot;5&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;6&quot; pad=&quot;6&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;&gt;
&lt;attribute name=&quot;PROD_ID&quot; value=&quot;CONN-11566&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; value=&quot;FEMALE 2x3&quot;/&gt;
&lt;/technology&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;/devices&gt;
&lt;/deviceset&gt;
&lt;/devicesets&gt;
&lt;/library&gt;
&lt;library name=&quot;Sunstang2018Library (1)&quot;&gt;
&lt;packages&gt;
&lt;package name=&quot;AXIAL-0.3&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;AXIAL-0.3&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;Commonly used for 1/4W through-hole resistors. 0.3&quot; pitch between holes.&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;0.762&quot; x2=&quot;2.54&quot; y2=&quot;0.762&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;2.54&quot; y1=&quot;0.762&quot; x2=&quot;2.54&quot; y2=&quot;0&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;2.54&quot; y1=&quot;0&quot; x2=&quot;2.54&quot; y2=&quot;-0.762&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;2.54&quot; y1=&quot;-0.762&quot; x2=&quot;-2.54&quot; y2=&quot;-0.762&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;-0.762&quot; x2=&quot;-2.54&quot; y2=&quot;0&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;0&quot; x2=&quot;-2.54&quot; y2=&quot;0.762&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;2.54&quot; y1=&quot;0&quot; x2=&quot;2.794&quot; y2=&quot;0&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;0&quot; x2=&quot;-2.794&quot; y2=&quot;0&quot; width=&quot;0.2032&quot; layer=&quot;21&quot;/&gt;
&lt;pad name=&quot;P$1&quot; x=&quot;-3.81&quot; y=&quot;0&quot; drill=&quot;0.9&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;pad name=&quot;P$2&quot; x=&quot;3.81&quot; y=&quot;0&quot; drill=&quot;0.9&quot; diameter=&quot;1.8796&quot;/&gt;
&lt;text x=&quot;0&quot; y=&quot;1.016&quot; size=&quot;0.6096&quot; layer=&quot;25&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;bottom-center&quot;&gt;&amp;gt;Name&lt;/text&gt;
&lt;text x=&quot;0&quot; y=&quot;-1.016&quot; size=&quot;0.6096&quot; layer=&quot;27&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;top-center&quot;&gt;&amp;gt;Value&lt;/text&gt;
&lt;/package&gt;
&lt;package name=&quot;2010&quot; urn=&quot;urn:adsk.eagle:footprint:39616/1&quot;&gt;
&lt;description&gt;&amp;lt;p&amp;gt;&amp;lt;b&amp;gt;Generic 5025 (2010) package&amp;lt;/b&amp;gt;&amp;lt;/p&amp;gt;
&amp;lt;p&amp;gt;0.2mm courtyard excess rounded to nearest 0.05mm.&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;wire x1=&quot;-1.789&quot; y1=&quot;1.1738&quot; x2=&quot;1.789&quot; y2=&quot;1.1738&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-1.764&quot; y1=&quot;-1.1738&quot; x2=&quot;1.814&quot; y2=&quot;-1.1738&quot; width=&quot;0.1524&quot; layer=&quot;51&quot;/&gt;
&lt;wire x1=&quot;-3.3&quot; y1=&quot;1.55&quot; x2=&quot;3.3&quot; y2=&quot;1.55&quot; width=&quot;0.0508&quot; layer=&quot;39&quot;/&gt;
&lt;wire x1=&quot;3.3&quot; y1=&quot;1.55&quot; x2=&quot;3.3&quot; y2=&quot;-1.55&quot; width=&quot;0.0508&quot; layer=&quot;39&quot;/&gt;
&lt;wire x1=&quot;3.3&quot; y1=&quot;-1.55&quot; x2=&quot;-3.3&quot; y2=&quot;-1.55&quot; width=&quot;0.0508&quot; layer=&quot;39&quot;/&gt;
&lt;wire x1=&quot;-3.3&quot; y1=&quot;-1.55&quot; x2=&quot;-3.3&quot; y2=&quot;1.55&quot; width=&quot;0.0508&quot; layer=&quot;39&quot;/&gt;
&lt;smd name=&quot;1&quot; x=&quot;-2.2&quot; y=&quot;0&quot; dx=&quot;1.8&quot; dy=&quot;2.7&quot; layer=&quot;1&quot;/&gt;
&lt;smd name=&quot;2&quot; x=&quot;2.2&quot; y=&quot;0&quot; dx=&quot;1.8&quot; dy=&quot;2.7&quot; layer=&quot;1&quot;/&gt;
&lt;text x=&quot;0&quot; y=&quot;1.651&quot; size=&quot;0.6096&quot; layer=&quot;25&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;bottom-center&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;0&quot; y=&quot;-1.651&quot; size=&quot;0.6096&quot; layer=&quot;27&quot; font=&quot;vector&quot; ratio=&quot;20&quot; align=&quot;top-center&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;rectangle x1=&quot;-2.5&quot; y1=&quot;-1.25&quot; x2=&quot;-1.6393&quot; y2=&quot;1.25&quot; layer=&quot;51&quot;/&gt;
&lt;rectangle x1=&quot;1.651&quot; y1=&quot;-1.25&quot; x2=&quot;2.5&quot; y2=&quot;1.25&quot; layer=&quot;51&quot;/&gt;
&lt;/package&gt;
&lt;/packages&gt;
&lt;packages3d&gt;
&lt;package3d name=&quot;2010&quot; urn=&quot;urn:adsk.eagle:package:39649/1&quot; type=&quot;box&quot;&gt;
&lt;description&gt;Generic 5025 (2010) package
0.2mm courtyard excess rounded to nearest 0.05mm.&lt;/description&gt;
&lt;packageinstances&gt;
&lt;packageinstance name=&quot;2010&quot;/&gt;
&lt;/packageinstances&gt;
&lt;/package3d&gt;
&lt;/packages3d&gt;
&lt;symbols&gt;
&lt;symbol name=&quot;RESISTOR&quot;&gt;
&lt;wire x1=&quot;-2.54&quot; y1=&quot;0&quot; x2=&quot;-2.159&quot; y2=&quot;1.016&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-2.159&quot; y1=&quot;1.016&quot; x2=&quot;-1.524&quot; y2=&quot;-1.016&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-1.524&quot; y1=&quot;-1.016&quot; x2=&quot;-0.889&quot; y2=&quot;1.016&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-0.889&quot; y1=&quot;1.016&quot; x2=&quot;-0.254&quot; y2=&quot;-1.016&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;-0.254&quot; y1=&quot;-1.016&quot; x2=&quot;0.381&quot; y2=&quot;1.016&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0.381&quot; y1=&quot;1.016&quot; x2=&quot;1.016&quot; y2=&quot;-1.016&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;1.016&quot; y1=&quot;-1.016&quot; x2=&quot;1.651&quot; y2=&quot;1.016&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;1.651&quot; y1=&quot;1.016&quot; x2=&quot;2.286&quot; y2=&quot;-1.016&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;2.286&quot; y1=&quot;-1.016&quot; x2=&quot;2.54&quot; y2=&quot;0&quot; width=&quot;0.1524&quot; layer=&quot;94&quot;/&gt;
&lt;text x=&quot;0&quot; y=&quot;1.524&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;&gt;&amp;gt;NAME&lt;/text&gt;
&lt;text x=&quot;0&quot; y=&quot;-1.524&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;pin name=&quot;2&quot; x=&quot;5.08&quot; y=&quot;0&quot; visible=&quot;off&quot; length=&quot;short&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot; rot=&quot;R180&quot;/&gt;
&lt;pin name=&quot;1&quot; x=&quot;-5.08&quot; y=&quot;0&quot; visible=&quot;off&quot; length=&quot;short&quot; direction=&quot;pas&quot; swaplevel=&quot;1&quot;/&gt;
&lt;/symbol&gt;
&lt;symbol name=&quot;VCC&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;VCC Voltage Supply&amp;lt;/h3&amp;gt;&lt;/description&gt;
&lt;wire x1=&quot;0.762&quot; y1=&quot;1.27&quot; x2=&quot;0&quot; y2=&quot;2.54&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;0&quot; y1=&quot;2.54&quot; x2=&quot;-0.762&quot; y2=&quot;1.27&quot; width=&quot;0.254&quot; layer=&quot;94&quot;/&gt;
&lt;pin name=&quot;VCC&quot; x=&quot;0&quot; y=&quot;0&quot; visible=&quot;off&quot; length=&quot;short&quot; direction=&quot;sup&quot; rot=&quot;R90&quot;/&gt;
&lt;text x=&quot;0&quot; y=&quot;2.794&quot; size=&quot;1.778&quot; layer=&quot;96&quot; align=&quot;bottom-center&quot;&gt;&amp;gt;VALUE&lt;/text&gt;
&lt;/symbol&gt;
&lt;/symbols&gt;
&lt;devicesets&gt;
&lt;deviceset name=&quot;RESISTOR&quot; prefix=&quot;R&quot; uservalue=&quot;yes&quot;&gt;
&lt;description&gt;Generic Resistor Package&lt;/description&gt;
&lt;gates&gt;
&lt;gate name=&quot;G$1&quot; symbol=&quot;RESISTOR&quot; x=&quot;0&quot; y=&quot;0&quot;/&gt;
&lt;/gates&gt;
&lt;devices&gt;
&lt;device name=&quot;AXIAL-0.3&quot; package=&quot;AXIAL-0.3&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;1&quot; pad=&quot;P$1&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;2&quot; pad=&quot;P$2&quot;/&gt;
&lt;/connects&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;/&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;device name=&quot;2010&quot; package=&quot;2010&quot;&gt;
&lt;connects&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;1&quot; pad=&quot;1&quot;/&gt;
&lt;connect gate=&quot;G$1&quot; pin=&quot;2&quot; pad=&quot;2&quot;/&gt;
&lt;/connects&gt;
&lt;package3dinstances&gt;
&lt;package3dinstance package3d_urn=&quot;urn:adsk.eagle:package:39649/1&quot;/&gt;
&lt;/package3dinstances&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;/&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;/devices&gt;
&lt;/deviceset&gt;
&lt;deviceset name=&quot;VCC&quot; prefix=&quot;SUPPLY&quot; uservalue=&quot;yes&quot;&gt;
&lt;description&gt;&amp;lt;h3&amp;gt;VCC Voltage Supply&amp;lt;/h3&amp;gt;
&amp;lt;p&amp;gt;Positive voltage supply (traditionally for a BJT device, C=collector).&amp;lt;/p&amp;gt;&lt;/description&gt;
&lt;gates&gt;
&lt;gate name=&quot;G$1&quot; symbol=&quot;VCC&quot; x=&quot;0&quot; y=&quot;0&quot;/&gt;
&lt;/gates&gt;
&lt;devices&gt;
&lt;device name=&quot;&quot;&gt;
&lt;technologies&gt;
&lt;technology name=&quot;&quot;/&gt;
&lt;/technologies&gt;
&lt;/device&gt;
&lt;/devices&gt;
&lt;/deviceset&gt;
&lt;/devicesets&gt;
&lt;/library&gt;
&lt;/libraries&gt;
&lt;attributes&gt;
&lt;/attributes&gt;
&lt;variantdefs&gt;
&lt;/variantdefs&gt;
&lt;classes&gt;
&lt;class number=&quot;0&quot; name=&quot;default&quot; width=&quot;0&quot; drill=&quot;0&quot;&gt;
&lt;/class&gt;
&lt;/classes&gt;
&lt;parts&gt;
&lt;part name=&quot;Y1&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;CRYSTAL&quot; device=&quot;PTH-HC49US&quot; value=&quot;16MHz&quot;/&gt;
&lt;part name=&quot;Y2&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;CRYSTAL&quot; device=&quot;PTH-HC49US&quot; value=&quot;16MHz&quot;/&gt;
&lt;part name=&quot;C1&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;CAP_CERAMIC&quot; device=&quot;-PTH-2.54MM-200V-5%&quot; value=&quot;22pF&quot;/&gt;
&lt;part name=&quot;C2&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;CAP_CERAMIC&quot; device=&quot;-PTH-2.54MM-200V-5%&quot; value=&quot;22pF&quot;/&gt;
&lt;part name=&quot;C3&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;CAP_CERAMIC&quot; device=&quot;-PTH-2.54MM-200V-5%&quot; value=&quot;22pF&quot;/&gt;
&lt;part name=&quot;C4&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;CAP_CERAMIC&quot; device=&quot;-PTH-2.54MM-200V-5%&quot; value=&quot;22pF&quot;/&gt;
&lt;part name=&quot;U4&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;V_REG_78XX&quot; device=&quot;-TO-220&quot; value=&quot;MC7805CT&quot;&gt;
&lt;attribute name=&quot;POWER&quot; value=&quot;&quot;/&gt;
&lt;/part&gt;
&lt;part name=&quot;D1&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;LED&quot; device=&quot;5MM&quot; value=&quot;GREEN&quot;/&gt;
&lt;part name=&quot;D2&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;LED&quot; device=&quot;5MM&quot; value=&quot;RED&quot;/&gt;
&lt;part name=&quot;D3&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;LED&quot; device=&quot;5MM&quot; value=&quot;BLUE&quot;/&gt;
&lt;part name=&quot;D4&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;LED&quot; device=&quot;5MM&quot; value=&quot;YELLOW&quot;/&gt;
&lt;part name=&quot;C5&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;CAP_POLAR&quot; device=&quot;-RADIAL-2.5MM-25V-20%&quot; value=&quot;10uF&quot;/&gt;
&lt;part name=&quot;C6&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;CAP_POLAR&quot; device=&quot;-RADIAL-2.5MM-25V-20%&quot; value=&quot;10uF&quot;/&gt;
&lt;part name=&quot;C7&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;CAP_POLAR&quot; device=&quot;-RADIAL-2.5MM-25V-20%&quot; value=&quot;10uF&quot;/&gt;
&lt;part name=&quot;C8&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;CAP_POLAR&quot; device=&quot;-RADIAL-2.5MM-25V-20%&quot; value=&quot;10uF&quot;/&gt;
&lt;part name=&quot;C9&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;CAP_CERAMIC&quot; device=&quot;-PTH-2.54MM-200V-5%&quot; value=&quot;0.1uF&quot;/&gt;
&lt;part name=&quot;C10&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;CAP_CERAMIC&quot; device=&quot;-PTH-2.54MM-200V-5%&quot; value=&quot;0.1uF&quot;/&gt;
&lt;part name=&quot;C11&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;CAP_CERAMIC&quot; device=&quot;-PTH-2.54MM-200V-5%&quot; value=&quot;0.1uF&quot;/&gt;
&lt;part name=&quot;J1&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;CONN_03X2&quot; device=&quot;WR-BHD_2X3_RA&quot; value=&quot;2x3/M/RA/SHR&quot;/&gt;
&lt;part name=&quot;S1&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;SWITCH-SPST&quot; device=&quot;-PTH-6.0MM&quot; value=&quot;SPST-NO&quot;/&gt;
&lt;part name=&quot;J3&quot; library=&quot;SparkFun-Connectors&quot; deviceset=&quot;CONN_03X2&quot; device=&quot;FEMALE&quot; value=&quot;2x3/M&quot;/&gt;
&lt;part name=&quot;FRAME1&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;FRAME-LETTER&quot; device=&quot;NO_PACKAGE&quot;/&gt;
&lt;part name=&quot;R7&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;1M&quot;/&gt;
&lt;part name=&quot;R8&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;1M&quot;/&gt;
&lt;part name=&quot;U5&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;PESD1CAN&quot; device=&quot;&quot; value=&quot;PESD1CAN&quot;/&gt;
&lt;part name=&quot;U2&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;MCP2515&quot; device=&quot;P&quot; value=&quot; MCP2515&quot;/&gt;
&lt;part name=&quot;U3&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;MCP2551&quot; device=&quot;&quot; value=&quot;MCP2551&quot;/&gt;
&lt;part name=&quot;U1&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;ATMEGA328P&quot; device=&quot;&quot; value=&quot;ATMEGA328p&quot;/&gt;
&lt;part name=&quot;JP1&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;JUMPER-SMT_2_NO&quot; device=&quot;_SILK&quot; value=&quot;NO&quot;/&gt;
&lt;part name=&quot;J2&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;CONN_03X2&quot; device=&quot;FEMALE&quot; value=&quot;2x3/M&quot;/&gt;
&lt;part name=&quot;GND1&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;GND&quot; device=&quot;&quot; value=&quot;GND&quot;/&gt;
&lt;part name=&quot;SWITCH&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;VCC&quot; device=&quot;&quot; value=&quot;SWITCH&quot;/&gt;
&lt;part name=&quot;SUPPLY1&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;VCC&quot; device=&quot;&quot; value=&quot;5V&quot;/&gt;
&lt;part name=&quot;GND4&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;GND&quot; device=&quot;&quot; value=&quot;GND&quot;/&gt;
&lt;part name=&quot;GND5&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;GND&quot; device=&quot;&quot; value=&quot;GND&quot;/&gt;
&lt;part name=&quot;GND6&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;GND&quot; device=&quot;&quot; value=&quot;GND&quot;/&gt;
&lt;part name=&quot;GND7&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;GND&quot; device=&quot;&quot; value=&quot;GND&quot;/&gt;
&lt;part name=&quot;GND8&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;GND&quot; device=&quot;&quot; value=&quot;GND&quot;/&gt;
&lt;part name=&quot;GND9&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;GND&quot; device=&quot;&quot; value=&quot;GND&quot;/&gt;
&lt;part name=&quot;GND10&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;GND&quot; device=&quot;&quot; value=&quot;GND&quot;/&gt;
&lt;part name=&quot;GND11&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;GND&quot; device=&quot;&quot; value=&quot;GND&quot;/&gt;
&lt;part name=&quot;GND16&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;GND&quot; device=&quot;&quot; value=&quot;GND&quot;/&gt;
&lt;part name=&quot;GND17&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;GND&quot; device=&quot;&quot; value=&quot;GND&quot;/&gt;
&lt;part name=&quot;SUPPLY2&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;VCC&quot; device=&quot;&quot; value=&quot;5V&quot;/&gt;
&lt;part name=&quot;SUPPLY3&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;VCC&quot; device=&quot;&quot; value=&quot;5V&quot;/&gt;
&lt;part name=&quot;SUPPLY4&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;VCC&quot; device=&quot;&quot; value=&quot;5V&quot;/&gt;
&lt;part name=&quot;SUPPLY5&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;VCC&quot; device=&quot;&quot; value=&quot;5V&quot;/&gt;
&lt;part name=&quot;SUPPLY7&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;VCC&quot; device=&quot;&quot; value=&quot;SUPP&quot;/&gt;
&lt;part name=&quot;SUPPLY8&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;VCC&quot; device=&quot;&quot; value=&quot;DC-DC&quot;/&gt;
&lt;part name=&quot;SUPPLY9&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;VCC&quot; device=&quot;&quot; value=&quot;SWITCH&quot;/&gt;
&lt;part name=&quot;SUPPLY11&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;VCC&quot; device=&quot;&quot; value=&quot;5V&quot;/&gt;
&lt;part name=&quot;SUPPLY14&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;VCC&quot; device=&quot;&quot; value=&quot;5V&quot;/&gt;
&lt;part name=&quot;GND2&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;GND&quot; device=&quot;&quot; value=&quot;GND&quot;/&gt;
&lt;part name=&quot;J4&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;CONN_07X2&quot; device=&quot;WR-BHD_2X7_RA&quot; value=&quot;2x7/M/RA/SHR&quot;/&gt;
&lt;part name=&quot;GND12&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;GND&quot; device=&quot;&quot; value=&quot;GND&quot;/&gt;
&lt;part name=&quot;D_LED1&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;LED&quot; device=&quot;5MM&quot; value=&quot;CLEAR&quot;/&gt;
&lt;part name=&quot;D_LED2&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;LED&quot; device=&quot;5MM&quot; value=&quot;CLEAR&quot;/&gt;
&lt;part name=&quot;R1&quot; library=&quot;Sunstang2018Library (1)&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;150&quot;/&gt;
&lt;part name=&quot;R2&quot; library=&quot;Sunstang2018Library (1)&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;150&quot;/&gt;
&lt;part name=&quot;R3&quot; library=&quot;Sunstang2018Library (1)&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;100&quot;/&gt;
&lt;part name=&quot;R4&quot; library=&quot;Sunstang2018Library (1)&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;150&quot;/&gt;
&lt;part name=&quot;R5&quot; library=&quot;Sunstang2018Library (1)&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;120&quot;/&gt;
&lt;part name=&quot;R6&quot; library=&quot;Sunstang2018Library (1)&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;4.7K&quot;/&gt;
&lt;part name=&quot;R9&quot; library=&quot;Sunstang2018Library (1)&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;100&quot;/&gt;
&lt;part name=&quot;R10&quot; library=&quot;Sunstang2018Library (1)&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;100&quot;/&gt;
&lt;part name=&quot;R11&quot; library=&quot;Sunstang2018Library (1)&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;4.7K&quot;/&gt;
&lt;part name=&quot;R12&quot; library=&quot;Sunstang2018Library (1)&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;4.7K&quot;/&gt;
&lt;part name=&quot;R13&quot; library=&quot;Sunstang2018Library (1)&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;4.7K&quot;/&gt;
&lt;part name=&quot;R14&quot; library=&quot;Sunstang2018Library (1)&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;4.7K&quot;/&gt;
&lt;part name=&quot;R15&quot; library=&quot;Sunstang2018Library (1)&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;4.7K&quot;/&gt;
&lt;part name=&quot;R16&quot; library=&quot;Sunstang2018Library (1)&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;4.7K&quot;/&gt;
&lt;part name=&quot;R17&quot; library=&quot;Sunstang2018Library (1)&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;4.7K&quot;/&gt;
&lt;part name=&quot;R18&quot; library=&quot;Sunstang2018Library (1)&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;4.7K&quot;/&gt;
&lt;part name=&quot;R19&quot; library=&quot;Sunstang2018Library (1)&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;4.7K&quot;/&gt;
&lt;part name=&quot;R20&quot; library=&quot;Sunstang2018Library (1)&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;4.7K&quot;/&gt;
&lt;part name=&quot;R21&quot; library=&quot;Sunstang2018Library (1)&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;4.7K&quot;/&gt;
&lt;part name=&quot;R22&quot; library=&quot;Sunstang2018Library (1)&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;4.7K&quot;/&gt;
&lt;part name=&quot;R23&quot; library=&quot;Sunstang2018Library (1)&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;10K&quot;/&gt;
&lt;part name=&quot;C12&quot; library=&quot;Sunstang2018Library&quot; deviceset=&quot;CAP_CERAMIC&quot; device=&quot;-PTH-2.54MM-200V-5%&quot; value=&quot;0.1uF&quot;/&gt;
&lt;part name=&quot;R24&quot; library=&quot;Sunstang2018Library (1)&quot; deviceset=&quot;RESISTOR&quot; device=&quot;AXIAL-0.3&quot; value=&quot;4.7K&quot;/&gt;
&lt;part name=&quot;SUPPLY6&quot; library=&quot;Sunstang2018Library (1)&quot; deviceset=&quot;VCC&quot; device=&quot;&quot; value=&quot;5V&quot;/&gt;
&lt;/parts&gt;
&lt;sheets&gt;
&lt;sheet&gt;
&lt;plain&gt;
&lt;text x=&quot;5.08&quot; y=&quot;177.8&quot; size=&quot;5.08&quot; layer=&quot;94&quot;&gt;POWER&lt;/text&gt;
&lt;text x=&quot;152.4&quot; y=&quot;177.8&quot; size=&quot;5.08&quot; layer=&quot;94&quot;&gt;CAN Communication&lt;/text&gt;
&lt;text x=&quot;5.08&quot; y=&quot;91.44&quot; size=&quot;5.08&quot; layer=&quot;94&quot;&gt;ATmega328p&lt;/text&gt;
&lt;text x=&quot;5.08&quot; y=&quot;132.08&quot; size=&quot;5.08&quot; layer=&quot;94&quot;&gt;Connectors&lt;/text&gt;
&lt;text x=&quot;63.5&quot; y=&quot;177.8&quot; size=&quot;5.08&quot; layer=&quot;94&quot;&gt;Test LEDs&lt;/text&gt;
&lt;text x=&quot;176.022&quot; y=&quot;20.574&quot; size=&quot;2.54&quot; layer=&quot;94&quot;&gt;Sunstang Solar Car Project&lt;/text&gt;
&lt;text x=&quot;166.116&quot; y=&quot;6.35&quot; size=&quot;2.54&quot; layer=&quot;94&quot;&gt;Steven Lawrence&lt;/text&gt;
&lt;text x=&quot;243.84&quot; y=&quot;6.604&quot; size=&quot;2.54&quot; layer=&quot;94&quot;&gt;4&lt;/text&gt;
&lt;wire x1=&quot;60.96&quot; y1=&quot;185.42&quot; x2=&quot;60.96&quot; y2=&quot;139.7&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;60.96&quot; y1=&quot;139.7&quot; x2=&quot;0&quot; y2=&quot;139.7&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;60.96&quot; y1=&quot;139.7&quot; x2=&quot;147.32&quot; y2=&quot;139.7&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;147.32&quot; y1=&quot;139.7&quot; x2=&quot;147.32&quot; y2=&quot;185.42&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;147.32&quot; y1=&quot;139.7&quot; x2=&quot;147.32&quot; y2=&quot;99.06&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;147.32&quot; y1=&quot;99.06&quot; x2=&quot;0&quot; y2=&quot;99.06&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;wire x1=&quot;147.32&quot; y1=&quot;99.06&quot; x2=&quot;147.32&quot; y2=&quot;25.4&quot; width=&quot;0.4064&quot; layer=&quot;94&quot;/&gt;
&lt;/plain&gt;
&lt;instances&gt;
&lt;instance part=&quot;Y1&quot; gate=&quot;G$1&quot; x=&quot;25.4&quot; y=&quot;35.56&quot; smashed=&quot;yes&quot; rot=&quot;R90&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;27.178&quot; y=&quot;37.084&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;26.162&quot; y=&quot;34.036&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;Y2&quot; gate=&quot;G$1&quot; x=&quot;167.64&quot; y=&quot;58.42&quot; smashed=&quot;yes&quot; rot=&quot;R90&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;169.418&quot; y=&quot;61.722&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; rot=&quot;R180&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;168.402&quot; y=&quot;56.896&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;C1&quot; gate=&quot;G$1&quot; x=&quot;15.24&quot; y=&quot;40.64&quot; smashed=&quot;yes&quot; rot=&quot;R90&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;11.811&quot; y=&quot;39.624&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; rot=&quot;R180&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;20.955&quot; y=&quot;39.624&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; rot=&quot;R180&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;C2&quot; gate=&quot;G$1&quot; x=&quot;15.24&quot; y=&quot;30.48&quot; smashed=&quot;yes&quot; rot=&quot;R90&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;12.065&quot; y=&quot;32.512&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; rot=&quot;R180&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;20.955&quot; y=&quot;32.766&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; rot=&quot;R180&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;C3&quot; gate=&quot;G$1&quot; x=&quot;160.02&quot; y=&quot;63.5&quot; smashed=&quot;yes&quot; rot=&quot;R90&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;156.591&quot; y=&quot;68.072&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; rot=&quot;R180&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;165.989&quot; y=&quot;68.072&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; rot=&quot;R180&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;C4&quot; gate=&quot;G$1&quot; x=&quot;160.02&quot; y=&quot;53.34&quot; smashed=&quot;yes&quot; rot=&quot;R90&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;156.845&quot; y=&quot;52.07&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; rot=&quot;R180&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;165.735&quot; y=&quot;51.816&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; rot=&quot;R180&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;U4&quot; gate=&quot;G$1&quot; x=&quot;35.56&quot; y=&quot;162.56&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;30.226&quot; y=&quot;165.608&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;35.814&quot; y=&quot;155.194&quot; size=&quot;1.778&quot; layer=&quot;96&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;D1&quot; gate=&quot;G$1&quot; x=&quot;127&quot; y=&quot;147.32&quot; smashed=&quot;yes&quot; rot=&quot;R90&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;130.048&quot; y=&quot;151.003&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; rot=&quot;R180&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;131.572&quot; y=&quot;141.605&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; rot=&quot;R180&quot; align=&quot;top-left&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;D2&quot; gate=&quot;G$1&quot; x=&quot;127&quot; y=&quot;167.64&quot; smashed=&quot;yes&quot; rot=&quot;R90&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;130.048&quot; y=&quot;171.069&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; rot=&quot;R180&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;129.794&quot; y=&quot;161.925&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; rot=&quot;R180&quot; align=&quot;top-left&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;D3&quot; gate=&quot;G$1&quot; x=&quot;127&quot; y=&quot;157.48&quot; smashed=&quot;yes&quot; rot=&quot;R90&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;130.302&quot; y=&quot;160.909&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; rot=&quot;R180&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;131.572&quot; y=&quot;151.765&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; rot=&quot;R180&quot; align=&quot;top-left&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;D4&quot; gate=&quot;G$1&quot; x=&quot;127&quot; y=&quot;177.8&quot; smashed=&quot;yes&quot; rot=&quot;R90&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;131.572&quot; y=&quot;181.991&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; rot=&quot;R180&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;131.572&quot; y=&quot;172.085&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; rot=&quot;R180&quot; align=&quot;top-left&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;C5&quot; gate=&quot;G$1&quot; x=&quot;20.32&quot; y=&quot;160.02&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;21.336&quot; y=&quot;160.655&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;21.336&quot; y=&quot;155.829&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;C6&quot; gate=&quot;G$1&quot; x=&quot;162.56&quot; y=&quot;121.92&quot; smashed=&quot;yes&quot; rot=&quot;R180&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;161.036&quot; y=&quot;126.111&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; rot=&quot;R180&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;161.798&quot; y=&quot;121.285&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; rot=&quot;R180&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;C7&quot; gate=&quot;G$1&quot; x=&quot;233.68&quot; y=&quot;88.9&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;234.442&quot; y=&quot;89.281&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;234.696&quot; y=&quot;84.709&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;C8&quot; gate=&quot;G$1&quot; x=&quot;35.56&quot; y=&quot;48.26&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;36.576&quot; y=&quot;48.895&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;36.576&quot; y=&quot;44.069&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;C9&quot; gate=&quot;G$1&quot; x=&quot;226.06&quot; y=&quot;86.36&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;226.314&quot; y=&quot;88.519&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;226.314&quot; y=&quot;84.963&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;C10&quot; gate=&quot;G$1&quot; x=&quot;43.18&quot; y=&quot;45.72&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;43.434&quot; y=&quot;47.879&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;43.434&quot; y=&quot;44.323&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;C11&quot; gate=&quot;G$1&quot; x=&quot;172.72&quot; y=&quot;124.46&quot; smashed=&quot;yes&quot; rot=&quot;R180&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;171.196&quot; y=&quot;126.365&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; rot=&quot;R180&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;172.212&quot; y=&quot;121.793&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; rot=&quot;R180&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;J1&quot; gate=&quot;G$1&quot; x=&quot;25.4&quot; y=&quot;111.76&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;21.844&quot; y=&quot;117.348&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;17.018&quot; y=&quot;105.918&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-left&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;S1&quot; gate=&quot;G$1&quot; x=&quot;30.48&quot; y=&quot;73.66&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;30.48&quot; y=&quot;75.184&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;30.48&quot; y=&quot;73.152&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;J3&quot; gate=&quot;G$1&quot; x=&quot;68.58&quot; y=&quot;111.76&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;65.024&quot; y=&quot;117.348&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;65.278&quot; y=&quot;105.918&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-left&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;FRAME1&quot; gate=&quot;G$1&quot; x=&quot;0&quot; y=&quot;0&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;FRAME1&quot; gate=&quot;V&quot; x=&quot;147.32&quot; y=&quot;0&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;LAST_DATE_TIME&quot; x=&quot;160.02&quot; y=&quot;1.27&quot; size=&quot;2.54&quot; layer=&quot;94&quot; font=&quot;vector&quot;/&gt;
&lt;attribute name=&quot;SHEET&quot; x=&quot;233.68&quot; y=&quot;1.27&quot; size=&quot;2.54&quot; layer=&quot;94&quot; font=&quot;vector&quot;/&gt;
&lt;attribute name=&quot;DRAWING_NAME&quot; x=&quot;162.814&quot; y=&quot;12.7&quot; size=&quot;2.54&quot; layer=&quot;94&quot; font=&quot;vector&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R7&quot; gate=&quot;G$1&quot; x=&quot;177.8&quot; y=&quot;58.42&quot; smashed=&quot;yes&quot; rot=&quot;R90&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;174.752&quot; y=&quot;59.69&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; rot=&quot;R180&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;180.34&quot; y=&quot;57.912&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; rot=&quot;R180&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R8&quot; gate=&quot;G$1&quot; x=&quot;35.56&quot; y=&quot;35.56&quot; smashed=&quot;yes&quot; rot=&quot;R90&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;32.512&quot; y=&quot;36.322&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; rot=&quot;R180&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;38.1&quot; y=&quot;36.322&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;U5&quot; gate=&quot;A&quot; x=&quot;198.12&quot; y=&quot;154.94&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;193.04&quot; y=&quot;160.528&quot; size=&quot;1.778&quot; layer=&quot;95&quot; ratio=&quot;10&quot; rot=&quot;SR0&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;193.04&quot; y=&quot;147.828&quot; size=&quot;1.778&quot; layer=&quot;96&quot; ratio=&quot;10&quot; rot=&quot;SR0&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;U2&quot; gate=&quot;G$1&quot; x=&quot;195.58&quot; y=&quot;71.12&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;187.96&quot; y=&quot;94.488&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;187.96&quot; y=&quot;46.228&quot; size=&quot;1.778&quot; layer=&quot;96&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;U3&quot; gate=&quot;MCP2551&quot; x=&quot;193.04&quot; y=&quot;116.84&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;188.087&quot; y=&quot;127.381&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;188.087&quot; y=&quot;112.268&quot; size=&quot;1.778&quot; layer=&quot;96&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;U1&quot; gate=&quot;U1&quot; x=&quot;73.66&quot; y=&quot;45.72&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;55.88&quot; y=&quot;81.788&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;55.88&quot; y=&quot;8.128&quot; size=&quot;1.778&quot; layer=&quot;96&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;JP1&quot; gate=&quot;G$1&quot; x=&quot;167.64&quot; y=&quot;157.48&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;165.1&quot; y=&quot;160.02&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;165.1&quot; y=&quot;154.94&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-left&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;J2&quot; gate=&quot;G$1&quot; x=&quot;68.58&quot; y=&quot;127&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;65.024&quot; y=&quot;132.588&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;65.278&quot; y=&quot;121.158&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-left&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;GND1&quot; gate=&quot;1&quot; x=&quot;17.78&quot; y=&quot;144.78&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;SWITCH&quot; gate=&quot;G$1&quot; x=&quot;17.78&quot; y=&quot;170.18&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;SUPPLY1&quot; gate=&quot;G$1&quot; x=&quot;45.72&quot; y=&quot;170.18&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;GND4&quot; gate=&quot;1&quot; x=&quot;137.16&quot; y=&quot;143.256&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;GND5&quot; gate=&quot;1&quot; x=&quot;220.98&quot; y=&quot;142.24&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;GND6&quot; gate=&quot;1&quot; x=&quot;228.6&quot; y=&quot;106.68&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;GND7&quot; gate=&quot;1&quot; x=&quot;154.94&quot; y=&quot;106.68&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;GND8&quot; gate=&quot;1&quot; x=&quot;236.22&quot; y=&quot;73.66&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;GND9&quot; gate=&quot;1&quot; x=&quot;180.34&quot; y=&quot;38.1&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;GND10&quot; gate=&quot;1&quot; x=&quot;152.4&quot; y=&quot;38.1&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;GND11&quot; gate=&quot;1&quot; x=&quot;7.62&quot; y=&quot;5.08&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;GND16&quot; gate=&quot;1&quot; x=&quot;12.7&quot; y=&quot;104.14&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;GND17&quot; gate=&quot;1&quot; x=&quot;81.28&quot; y=&quot;104.14&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;SUPPLY2&quot; gate=&quot;G$1&quot; x=&quot;106.68&quot; y=&quot;177.8&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;SUPPLY3&quot; gate=&quot;G$1&quot; x=&quot;152.4&quot; y=&quot;134.62&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;SUPPLY4&quot; gate=&quot;G$1&quot; x=&quot;236.22&quot; y=&quot;99.06&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;SUPPLY5&quot; gate=&quot;G$1&quot; x=&quot;17.78&quot; y=&quot;83.82&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;SUPPLY7&quot; gate=&quot;G$1&quot; x=&quot;45.72&quot; y=&quot;121.92&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;SUPPLY8&quot; gate=&quot;G$1&quot; x=&quot;40.64&quot; y=&quot;119.38&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;SUPPLY9&quot; gate=&quot;G$1&quot; x=&quot;35.56&quot; y=&quot;116.84&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;SUPPLY11&quot; gate=&quot;G$1&quot; x=&quot;78.74&quot; y=&quot;134.62&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;SUPPLY14&quot; gate=&quot;G$1&quot; x=&quot;134.62&quot; y=&quot;83.82&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;GND2&quot; gate=&quot;1&quot; x=&quot;129.54&quot; y=&quot;5.08&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;J4&quot; gate=&quot;G$1&quot; x=&quot;114.3&quot; y=&quot;116.84&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;105.41&quot; y=&quot;106.934&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot;/&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;110.49&quot; y=&quot;130.048&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;GND12&quot; gate=&quot;1&quot; x=&quot;127&quot; y=&quot;106.68&quot; smashed=&quot;yes&quot;/&gt;
&lt;instance part=&quot;D_LED1&quot; gate=&quot;G$1&quot; x=&quot;116.84&quot; y=&quot;81.28&quot; smashed=&quot;yes&quot; rot=&quot;R90&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;116.332&quot; y=&quot;84.709&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; rot=&quot;R180&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;124.46&quot; y=&quot;82.931&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; rot=&quot;R180&quot; align=&quot;top-left&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;D_LED2&quot; gate=&quot;G$1&quot; x=&quot;116.84&quot; y=&quot;73.66&quot; smashed=&quot;yes&quot; rot=&quot;R90&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;116.332&quot; y=&quot;77.089&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; rot=&quot;R180&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;124.46&quot; y=&quot;75.311&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; rot=&quot;R180&quot; align=&quot;top-left&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R1&quot; gate=&quot;G$1&quot; x=&quot;116.84&quot; y=&quot;177.8&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;116.84&quot; y=&quot;179.324&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;116.84&quot; y=&quot;176.276&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R2&quot; gate=&quot;G$1&quot; x=&quot;116.84&quot; y=&quot;167.64&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;116.84&quot; y=&quot;169.164&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;116.84&quot; y=&quot;166.116&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R3&quot; gate=&quot;G$1&quot; x=&quot;116.84&quot; y=&quot;157.48&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;116.84&quot; y=&quot;159.004&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;116.84&quot; y=&quot;155.956&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R4&quot; gate=&quot;G$1&quot; x=&quot;116.84&quot; y=&quot;147.32&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;116.84&quot; y=&quot;148.844&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;116.84&quot; y=&quot;145.796&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R5&quot; gate=&quot;G$1&quot; x=&quot;180.34&quot; y=&quot;157.48&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;180.34&quot; y=&quot;159.004&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;180.34&quot; y=&quot;155.956&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R6&quot; gate=&quot;G$1&quot; x=&quot;220.98&quot; y=&quot;124.46&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;220.98&quot; y=&quot;125.984&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;220.98&quot; y=&quot;122.936&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R9&quot; gate=&quot;G$1&quot; x=&quot;104.14&quot; y=&quot;81.28&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;101.6&quot; y=&quot;82.804&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;106.68&quot; y=&quot;79.756&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R10&quot; gate=&quot;G$1&quot; x=&quot;104.14&quot; y=&quot;73.66&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;101.6&quot; y=&quot;75.184&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;106.68&quot; y=&quot;72.136&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R11&quot; gate=&quot;G$1&quot; x=&quot;119.38&quot; y=&quot;66.04&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;116.84&quot; y=&quot;67.564&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;121.92&quot; y=&quot;64.516&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R12&quot; gate=&quot;G$1&quot; x=&quot;119.38&quot; y=&quot;60.96&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;116.84&quot; y=&quot;62.484&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;121.92&quot; y=&quot;59.436&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R13&quot; gate=&quot;G$1&quot; x=&quot;119.38&quot; y=&quot;55.88&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;116.84&quot; y=&quot;57.404&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;121.92&quot; y=&quot;54.356&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R14&quot; gate=&quot;G$1&quot; x=&quot;119.38&quot; y=&quot;50.8&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;116.84&quot; y=&quot;52.324&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;121.92&quot; y=&quot;49.276&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R15&quot; gate=&quot;G$1&quot; x=&quot;119.38&quot; y=&quot;10.16&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;119.38&quot; y=&quot;11.684&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;119.38&quot; y=&quot;8.636&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R16&quot; gate=&quot;G$1&quot; x=&quot;25.4&quot; y=&quot;10.16&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;22.86&quot; y=&quot;11.684&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;30.48&quot; y=&quot;13.716&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R17&quot; gate=&quot;G$1&quot; x=&quot;25.4&quot; y=&quot;15.24&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;22.86&quot; y=&quot;16.764&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;30.48&quot; y=&quot;18.796&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R18&quot; gate=&quot;G$1&quot; x=&quot;25.4&quot; y=&quot;20.32&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;22.86&quot; y=&quot;21.844&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;30.48&quot; y=&quot;23.876&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R19&quot; gate=&quot;G$1&quot; x=&quot;25.4&quot; y=&quot;25.4&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;22.86&quot; y=&quot;26.924&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;27.94&quot; y=&quot;28.956&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R20&quot; gate=&quot;G$1&quot; x=&quot;27.94&quot; y=&quot;55.88&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;25.4&quot; y=&quot;57.404&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;30.48&quot; y=&quot;54.356&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R21&quot; gate=&quot;G$1&quot; x=&quot;27.94&quot; y=&quot;60.96&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;25.4&quot; y=&quot;62.484&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;30.48&quot; y=&quot;59.436&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R22&quot; gate=&quot;G$1&quot; x=&quot;27.94&quot; y=&quot;66.04&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;25.4&quot; y=&quot;67.564&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;30.48&quot; y=&quot;64.516&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R23&quot; gate=&quot;G$1&quot; x=&quot;30.48&quot; y=&quot;78.74&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;25.4&quot; y=&quot;80.264&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;33.02&quot; y=&quot;82.296&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;C12&quot; gate=&quot;G$1&quot; x=&quot;12.7&quot; y=&quot;68.58&quot; smashed=&quot;yes&quot; rot=&quot;R180&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;8.509&quot; y=&quot;69.596&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;14.605&quot; y=&quot;64.516&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;R24&quot; gate=&quot;G$1&quot; x=&quot;119.38&quot; y=&quot;20.32&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;NAME&quot; x=&quot;119.38&quot; y=&quot;21.844&quot; size=&quot;1.778&quot; layer=&quot;95&quot; font=&quot;vector&quot; align=&quot;bottom-center&quot;/&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;119.38&quot; y=&quot;18.796&quot; size=&quot;1.778&quot; layer=&quot;96&quot; font=&quot;vector&quot; align=&quot;top-center&quot;/&gt;
&lt;/instance&gt;
&lt;instance part=&quot;SUPPLY6&quot; gate=&quot;G$1&quot; x=&quot;124.46&quot; y=&quot;132.08&quot; smashed=&quot;yes&quot;&gt;
&lt;attribute name=&quot;VALUE&quot; x=&quot;124.46&quot; y=&quot;134.874&quot; size=&quot;1.778&quot; layer=&quot;96&quot; align=&quot;bottom-center&quot;/&gt;
&lt;/instance&gt;
&lt;/instances&gt;
&lt;busses&gt;
&lt;/busses&gt;
&lt;nets&gt;
&lt;net name=&quot;SCK&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;wire x1=&quot;96.52&quot; y1=&quot;33.02&quot; x2=&quot;101.6&quot; y2=&quot;33.02&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;PB5(SCK)&quot;/&gt;
&lt;label x=&quot;101.6&quot; y=&quot;33.02&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;wire x1=&quot;215.9&quot; y1=&quot;66.04&quot; x2=&quot;218.44&quot; y2=&quot;66.04&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U2&quot; gate=&quot;G$1&quot; pin=&quot;SCK&quot;/&gt;
&lt;label x=&quot;218.44&quot; y=&quot;66.04&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J2&quot; gate=&quot;G$1&quot; pin=&quot;3&quot;/&gt;
&lt;wire x1=&quot;60.96&quot; y1=&quot;127&quot; x2=&quot;55.88&quot; y2=&quot;127&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;55.88&quot; y=&quot;127&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;MISO&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;wire x1=&quot;96.52&quot; y1=&quot;27.94&quot; x2=&quot;101.6&quot; y2=&quot;27.94&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;PB4(MISO)&quot;/&gt;
&lt;label x=&quot;101.6&quot; y=&quot;27.94&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;wire x1=&quot;215.9&quot; y1=&quot;76.2&quot; x2=&quot;218.44&quot; y2=&quot;76.2&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U2&quot; gate=&quot;G$1&quot; pin=&quot;SO&quot;/&gt;
&lt;label x=&quot;218.44&quot; y=&quot;76.2&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J2&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;wire x1=&quot;60.96&quot; y1=&quot;129.54&quot; x2=&quot;55.88&quot; y2=&quot;129.54&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;55.88&quot; y=&quot;129.54&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;MOSI&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;wire x1=&quot;96.52&quot; y1=&quot;22.86&quot; x2=&quot;101.6&quot; y2=&quot;22.86&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;PB3(MOSI/OC2)&quot;/&gt;
&lt;label x=&quot;101.6&quot; y=&quot;22.86&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;wire x1=&quot;215.9&quot; y1=&quot;71.12&quot; x2=&quot;218.44&quot; y2=&quot;71.12&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U2&quot; gate=&quot;G$1&quot; pin=&quot;SI&quot;/&gt;
&lt;label x=&quot;218.44&quot; y=&quot;71.12&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J2&quot; gate=&quot;G$1&quot; pin=&quot;4&quot;/&gt;
&lt;wire x1=&quot;76.2&quot; y1=&quot;127&quot; x2=&quot;81.28&quot; y2=&quot;127&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;81.28&quot; y=&quot;127&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;CS&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;wire x1=&quot;96.52&quot; y1=&quot;17.78&quot; x2=&quot;99.06&quot; y2=&quot;17.78&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;PB2(SS/OC1B)&quot;/&gt;
&lt;label x=&quot;101.6&quot; y=&quot;17.78&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;junction x=&quot;99.06&quot; y=&quot;17.78&quot;/&gt;
&lt;wire x1=&quot;99.06&quot; y1=&quot;17.78&quot; x2=&quot;101.6&quot; y2=&quot;17.78&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;99.06&quot; y1=&quot;17.78&quot; x2=&quot;99.06&quot; y2=&quot;20.32&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;99.06&quot; y1=&quot;20.32&quot; x2=&quot;114.3&quot; y2=&quot;20.32&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;R24&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;wire x1=&quot;215.9&quot; y1=&quot;81.28&quot; x2=&quot;218.44&quot; y2=&quot;81.28&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U2&quot; gate=&quot;G$1&quot; pin=&quot;CS&quot;/&gt;
&lt;label x=&quot;218.44&quot; y=&quot;81.28&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;GND&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;S1&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;wire x1=&quot;25.4&quot; y1=&quot;73.66&quot; x2=&quot;12.7&quot; y2=&quot;73.66&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;12.7&quot; y1=&quot;73.66&quot; x2=&quot;7.62&quot; y2=&quot;73.66&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;7.62&quot; y1=&quot;73.66&quot; x2=&quot;7.62&quot; y2=&quot;66.04&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;GND11&quot; gate=&quot;1&quot; pin=&quot;GND&quot;/&gt;
&lt;wire x1=&quot;7.62&quot; y1=&quot;66.04&quot; x2=&quot;7.62&quot; y2=&quot;63.5&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;7.62&quot; y1=&quot;63.5&quot; x2=&quot;7.62&quot; y2=&quot;60.96&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;7.62&quot; y1=&quot;60.96&quot; x2=&quot;7.62&quot; y2=&quot;55.88&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;7.62&quot; y1=&quot;55.88&quot; x2=&quot;7.62&quot; y2=&quot;43.18&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;7.62&quot; y1=&quot;43.18&quot; x2=&quot;7.62&quot; y2=&quot;40.64&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;7.62&quot; y1=&quot;40.64&quot; x2=&quot;7.62&quot; y2=&quot;30.48&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;7.62&quot; y1=&quot;30.48&quot; x2=&quot;7.62&quot; y2=&quot;25.4&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;7.62&quot; y1=&quot;25.4&quot; x2=&quot;7.62&quot; y2=&quot;20.32&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;7.62&quot; y1=&quot;20.32&quot; x2=&quot;7.62&quot; y2=&quot;15.24&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;7.62&quot; y1=&quot;15.24&quot; x2=&quot;7.62&quot; y2=&quot;10.16&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;7.62&quot; y1=&quot;10.16&quot; x2=&quot;7.62&quot; y2=&quot;7.62&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;22.86&quot; y1=&quot;66.04&quot; x2=&quot;7.62&quot; y2=&quot;66.04&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;7.62&quot; y=&quot;66.04&quot;/&gt;
&lt;wire x1=&quot;22.86&quot; y1=&quot;60.96&quot; x2=&quot;7.62&quot; y2=&quot;60.96&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;7.62&quot; y=&quot;60.96&quot;/&gt;
&lt;wire x1=&quot;22.86&quot; y1=&quot;55.88&quot; x2=&quot;7.62&quot; y2=&quot;55.88&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;7.62&quot; y=&quot;55.88&quot;/&gt;
&lt;pinref part=&quot;C10&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;pinref part=&quot;C8&quot; gate=&quot;G$1&quot; pin=&quot;-&quot;/&gt;
&lt;wire x1=&quot;43.18&quot; y1=&quot;43.18&quot; x2=&quot;35.56&quot; y2=&quot;43.18&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;35.56&quot; y1=&quot;43.18&quot; x2=&quot;7.62&quot; y2=&quot;43.18&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;35.56&quot; y=&quot;43.18&quot;/&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;GND@1&quot;/&gt;
&lt;wire x1=&quot;43.18&quot; y1=&quot;43.18&quot; x2=&quot;50.8&quot; y2=&quot;43.18&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;43.18&quot; y=&quot;43.18&quot;/&gt;
&lt;junction x=&quot;7.62&quot; y=&quot;43.18&quot;/&gt;
&lt;pinref part=&quot;C1&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;wire x1=&quot;10.16&quot; y1=&quot;40.64&quot; x2=&quot;7.62&quot; y2=&quot;40.64&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;7.62&quot; y=&quot;40.64&quot;/&gt;
&lt;pinref part=&quot;C2&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;wire x1=&quot;10.16&quot; y1=&quot;30.48&quot; x2=&quot;7.62&quot; y2=&quot;30.48&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;7.62&quot; y=&quot;30.48&quot;/&gt;
&lt;wire x1=&quot;20.32&quot; y1=&quot;25.4&quot; x2=&quot;7.62&quot; y2=&quot;25.4&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;7.62&quot; y=&quot;25.4&quot;/&gt;
&lt;wire x1=&quot;20.32&quot; y1=&quot;20.32&quot; x2=&quot;7.62&quot; y2=&quot;20.32&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;7.62&quot; y=&quot;20.32&quot;/&gt;
&lt;wire x1=&quot;20.32&quot; y1=&quot;15.24&quot; x2=&quot;7.62&quot; y2=&quot;15.24&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;7.62&quot; y=&quot;15.24&quot;/&gt;
&lt;wire x1=&quot;20.32&quot; y1=&quot;10.16&quot; x2=&quot;7.62&quot; y2=&quot;10.16&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;7.62&quot; y=&quot;10.16&quot;/&gt;
&lt;label x=&quot;4.826&quot; y=&quot;2.794&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;pinref part=&quot;R16&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;pinref part=&quot;R17&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;pinref part=&quot;R18&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;pinref part=&quot;R19&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;pinref part=&quot;R20&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;pinref part=&quot;R21&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;pinref part=&quot;R22&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;pinref part=&quot;C12&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;wire x1=&quot;12.7&quot; y1=&quot;71.12&quot; x2=&quot;12.7&quot; y2=&quot;73.66&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;12.7&quot; y=&quot;73.66&quot;/&gt;
&lt;pinref part=&quot;C12&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;wire x1=&quot;12.7&quot; y1=&quot;63.5&quot; x2=&quot;7.62&quot; y2=&quot;63.5&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;7.62&quot; y=&quot;63.5&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;U3&quot; gate=&quot;MCP2551&quot; pin=&quot;GND&quot;/&gt;
&lt;wire x1=&quot;182.88&quot; y1=&quot;121.92&quot; x2=&quot;175.26&quot; y2=&quot;121.92&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;175.26&quot; y1=&quot;121.92&quot; x2=&quot;175.26&quot; y2=&quot;127&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;C11&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;wire x1=&quot;175.26&quot; y1=&quot;127&quot; x2=&quot;172.72&quot; y2=&quot;127&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;C6&quot; gate=&quot;G$1&quot; pin=&quot;-&quot;/&gt;
&lt;wire x1=&quot;172.72&quot; y1=&quot;127&quot; x2=&quot;162.56&quot; y2=&quot;127&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;172.72&quot; y=&quot;127&quot;/&gt;
&lt;pinref part=&quot;GND7&quot; gate=&quot;1&quot; pin=&quot;GND&quot;/&gt;
&lt;wire x1=&quot;162.56&quot; y1=&quot;127&quot; x2=&quot;154.94&quot; y2=&quot;127&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;154.94&quot; y1=&quot;127&quot; x2=&quot;154.94&quot; y2=&quot;109.22&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;162.56&quot; y=&quot;127&quot;/&gt;
&lt;label x=&quot;152.4&quot; y=&quot;104.394&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;wire x1=&quot;226.06&quot; y1=&quot;124.46&quot; x2=&quot;228.6&quot; y2=&quot;124.46&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;GND6&quot; gate=&quot;1&quot; pin=&quot;GND&quot;/&gt;
&lt;wire x1=&quot;228.6&quot; y1=&quot;124.46&quot; x2=&quot;228.6&quot; y2=&quot;109.22&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;225.806&quot; y=&quot;104.394&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;pinref part=&quot;R6&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;GND5&quot; gate=&quot;1&quot; pin=&quot;GND&quot;/&gt;
&lt;pinref part=&quot;U5&quot; gate=&quot;A&quot; pin=&quot;3&quot;/&gt;
&lt;wire x1=&quot;220.98&quot; y1=&quot;144.78&quot; x2=&quot;220.98&quot; y2=&quot;155.067&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;220.98&quot; y1=&quot;155.067&quot; x2=&quot;205.74&quot; y2=&quot;154.94&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;218.44&quot; y=&quot;140.208&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;U4&quot; gate=&quot;G$1&quot; pin=&quot;GND&quot;/&gt;
&lt;pinref part=&quot;C5&quot; gate=&quot;G$1&quot; pin=&quot;-&quot;/&gt;
&lt;wire x1=&quot;35.56&quot; y1=&quot;154.94&quot; x2=&quot;20.32&quot; y2=&quot;154.94&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;20.32&quot; y1=&quot;154.94&quot; x2=&quot;17.78&quot; y2=&quot;154.94&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;20.32&quot; y=&quot;154.94&quot;/&gt;
&lt;pinref part=&quot;GND1&quot; gate=&quot;1&quot; pin=&quot;GND&quot;/&gt;
&lt;wire x1=&quot;17.78&quot; y1=&quot;154.94&quot; x2=&quot;17.78&quot; y2=&quot;147.32&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;14.986&quot; y=&quot;142.748&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;D1&quot; gate=&quot;G$1&quot; pin=&quot;C&quot;/&gt;
&lt;wire x1=&quot;132.08&quot; y1=&quot;147.32&quot; x2=&quot;137.16&quot; y2=&quot;147.32&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;GND4&quot; gate=&quot;1&quot; pin=&quot;GND&quot;/&gt;
&lt;wire x1=&quot;137.16&quot; y1=&quot;147.32&quot; x2=&quot;137.16&quot; y2=&quot;145.796&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;134.366&quot; y=&quot;141.224&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;C9&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;pinref part=&quot;C7&quot; gate=&quot;G$1&quot; pin=&quot;-&quot;/&gt;
&lt;wire x1=&quot;226.06&quot; y1=&quot;83.82&quot; x2=&quot;233.68&quot; y2=&quot;83.82&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;233.68&quot; y1=&quot;83.82&quot; x2=&quot;236.22&quot; y2=&quot;83.82&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;233.68&quot; y=&quot;83.82&quot;/&gt;
&lt;pinref part=&quot;GND8&quot; gate=&quot;1&quot; pin=&quot;GND&quot;/&gt;
&lt;wire x1=&quot;236.22&quot; y1=&quot;83.82&quot; x2=&quot;236.22&quot; y2=&quot;76.2&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;233.68&quot; y=&quot;71.374&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;U2&quot; gate=&quot;G$1&quot; pin=&quot;GND&quot;/&gt;
&lt;wire x1=&quot;182.88&quot; y1=&quot;50.8&quot; x2=&quot;180.34&quot; y2=&quot;50.8&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;GND9&quot; gate=&quot;1&quot; pin=&quot;GND&quot;/&gt;
&lt;wire x1=&quot;180.34&quot; y1=&quot;50.8&quot; x2=&quot;180.34&quot; y2=&quot;40.64&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;177.8&quot; y=&quot;35.814&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J3&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;wire x1=&quot;76.2&quot; y1=&quot;114.3&quot; x2=&quot;81.28&quot; y2=&quot;114.3&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;GND17&quot; gate=&quot;1&quot; pin=&quot;GND&quot;/&gt;
&lt;wire x1=&quot;81.28&quot; y1=&quot;114.3&quot; x2=&quot;81.28&quot; y2=&quot;106.68&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;78.486&quot; y=&quot;101.854&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;pinref part=&quot;J2&quot; gate=&quot;G$1&quot; pin=&quot;6&quot;/&gt;
&lt;wire x1=&quot;76.2&quot; y1=&quot;124.46&quot; x2=&quot;81.28&quot; y2=&quot;124.46&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;81.28&quot; y1=&quot;124.46&quot; x2=&quot;81.28&quot; y2=&quot;114.3&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;81.28&quot; y=&quot;114.3&quot;/&gt;
&lt;label x=&quot;124.206&quot; y=&quot;104.394&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;wire x1=&quot;124.46&quot; y1=&quot;66.04&quot; x2=&quot;129.54&quot; y2=&quot;66.04&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;129.54&quot; y1=&quot;66.04&quot; x2=&quot;129.54&quot; y2=&quot;60.96&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;129.54&quot; y1=&quot;60.96&quot; x2=&quot;129.54&quot; y2=&quot;55.88&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;129.54&quot; y1=&quot;55.88&quot; x2=&quot;129.54&quot; y2=&quot;50.8&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;129.54&quot; y1=&quot;50.8&quot; x2=&quot;129.54&quot; y2=&quot;48.26&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;129.54&quot; y1=&quot;48.26&quot; x2=&quot;129.54&quot; y2=&quot;10.16&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;129.54&quot; y1=&quot;10.16&quot; x2=&quot;129.54&quot; y2=&quot;7.62&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;124.46&quot; y1=&quot;10.16&quot; x2=&quot;129.54&quot; y2=&quot;10.16&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;129.54&quot; y=&quot;10.16&quot;/&gt;
&lt;wire x1=&quot;124.46&quot; y1=&quot;50.8&quot; x2=&quot;129.54&quot; y2=&quot;50.8&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;129.54&quot; y=&quot;50.8&quot;/&gt;
&lt;wire x1=&quot;124.46&quot; y1=&quot;55.88&quot; x2=&quot;129.54&quot; y2=&quot;55.88&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;129.54&quot; y=&quot;55.88&quot;/&gt;
&lt;pinref part=&quot;GND2&quot; gate=&quot;1&quot; pin=&quot;GND&quot;/&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;GND@2&quot;/&gt;
&lt;wire x1=&quot;96.52&quot; y1=&quot;48.26&quot; x2=&quot;129.54&quot; y2=&quot;48.26&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;129.54&quot; y=&quot;48.26&quot;/&gt;
&lt;pinref part=&quot;D_LED2&quot; gate=&quot;G$1&quot; pin=&quot;C&quot;/&gt;
&lt;wire x1=&quot;121.92&quot; y1=&quot;73.66&quot; x2=&quot;129.54&quot; y2=&quot;73.66&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;129.54&quot; y1=&quot;73.66&quot; x2=&quot;129.54&quot; y2=&quot;66.04&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;129.54&quot; y=&quot;66.04&quot;/&gt;
&lt;pinref part=&quot;D_LED1&quot; gate=&quot;G$1&quot; pin=&quot;C&quot;/&gt;
&lt;wire x1=&quot;121.92&quot; y1=&quot;81.28&quot; x2=&quot;129.54&quot; y2=&quot;81.28&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;129.54&quot; y1=&quot;81.28&quot; x2=&quot;129.54&quot; y2=&quot;73.66&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;129.54&quot; y=&quot;73.66&quot;/&gt;
&lt;label x=&quot;126.746&quot; y=&quot;2.794&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;wire x1=&quot;124.46&quot; y1=&quot;60.96&quot; x2=&quot;129.54&quot; y2=&quot;60.96&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;129.54&quot; y=&quot;60.96&quot;/&gt;
&lt;pinref part=&quot;R11&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;pinref part=&quot;R12&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;pinref part=&quot;R13&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;pinref part=&quot;R14&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;pinref part=&quot;R15&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;C4&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;wire x1=&quot;154.94&quot; y1=&quot;53.34&quot; x2=&quot;152.4&quot; y2=&quot;53.34&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;GND10&quot; gate=&quot;1&quot; pin=&quot;GND&quot;/&gt;
&lt;wire x1=&quot;152.4&quot; y1=&quot;53.34&quot; x2=&quot;152.4&quot; y2=&quot;40.64&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;C3&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;wire x1=&quot;154.94&quot; y1=&quot;63.5&quot; x2=&quot;152.4&quot; y2=&quot;63.5&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;152.4&quot; y1=&quot;63.5&quot; x2=&quot;152.4&quot; y2=&quot;53.34&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;152.4&quot; y=&quot;53.34&quot;/&gt;
&lt;label x=&quot;149.86&quot; y=&quot;35.814&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J1&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;wire x1=&quot;12.7&quot; y1=&quot;114.3&quot; x2=&quot;17.78&quot; y2=&quot;114.3&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;GND16&quot; gate=&quot;1&quot; pin=&quot;GND&quot;/&gt;
&lt;wire x1=&quot;12.7&quot; y1=&quot;106.68&quot; x2=&quot;12.7&quot; y2=&quot;114.3&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;10.414&quot; y=&quot;101.854&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J4&quot; gate=&quot;G$1&quot; pin=&quot;14&quot;/&gt;
&lt;pinref part=&quot;GND12&quot; gate=&quot;1&quot; pin=&quot;GND&quot;/&gt;
&lt;wire x1=&quot;121.92&quot; y1=&quot;111.76&quot; x2=&quot;127&quot; y2=&quot;111.76&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;127&quot; y1=&quot;111.76&quot; x2=&quot;127&quot; y2=&quot;109.22&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;N$4&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;Y1&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;wire x1=&quot;25.4&quot; y1=&quot;38.1&quot; x2=&quot;25.4&quot; y2=&quot;40.64&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;R8&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;wire x1=&quot;25.4&quot; y1=&quot;40.64&quot; x2=&quot;35.56&quot; y2=&quot;40.64&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;C1&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;wire x1=&quot;17.78&quot; y1=&quot;40.64&quot; x2=&quot;25.4&quot; y2=&quot;40.64&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;25.4&quot; y=&quot;40.64&quot;/&gt;
&lt;wire x1=&quot;35.56&quot; y1=&quot;40.64&quot; x2=&quot;40.64&quot; y2=&quot;40.64&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;35.56&quot; y=&quot;40.64&quot;/&gt;
&lt;wire x1=&quot;40.64&quot; y1=&quot;40.64&quot; x2=&quot;40.64&quot; y2=&quot;38.1&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;PB6(XTAL1/TOSC1)&quot;/&gt;
&lt;wire x1=&quot;40.64&quot; y1=&quot;38.1&quot; x2=&quot;50.8&quot; y2=&quot;38.1&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;TXD&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;wire x1=&quot;182.88&quot; y1=&quot;91.44&quot; x2=&quot;177.8&quot; y2=&quot;91.44&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U2&quot; gate=&quot;G$1&quot; pin=&quot;TXCAN&quot;/&gt;
&lt;label x=&quot;177.8&quot; y=&quot;91.44&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;wire x1=&quot;182.88&quot; y1=&quot;124.46&quot; x2=&quot;180.34&quot; y2=&quot;124.46&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U3&quot; gate=&quot;MCP2551&quot; pin=&quot;TXD&quot;/&gt;
&lt;label x=&quot;180.34&quot; y=&quot;124.46&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;D2&quot; gate=&quot;G$1&quot; pin=&quot;C&quot;/&gt;
&lt;wire x1=&quot;132.08&quot; y1=&quot;167.64&quot; x2=&quot;137.16&quot; y2=&quot;167.64&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;137.16&quot; y=&quot;167.64&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;RXD&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;wire x1=&quot;182.88&quot; y1=&quot;86.36&quot; x2=&quot;177.8&quot; y2=&quot;86.36&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U2&quot; gate=&quot;G$1&quot; pin=&quot;RXCAN&quot;/&gt;
&lt;label x=&quot;177.8&quot; y=&quot;86.36&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;wire x1=&quot;182.88&quot; y1=&quot;116.84&quot; x2=&quot;180.34&quot; y2=&quot;116.84&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U3&quot; gate=&quot;MCP2551&quot; pin=&quot;RXD&quot;/&gt;
&lt;label x=&quot;180.34&quot; y=&quot;116.84&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;D3&quot; gate=&quot;G$1&quot; pin=&quot;C&quot;/&gt;
&lt;wire x1=&quot;132.08&quot; y1=&quot;157.48&quot; x2=&quot;137.16&quot; y2=&quot;157.48&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;137.16&quot; y=&quot;157.48&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;RS&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;wire x1=&quot;215.9&quot; y1=&quot;86.36&quot; x2=&quot;218.44&quot; y2=&quot;86.36&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U2&quot; gate=&quot;G$1&quot; pin=&quot;RESET&quot;/&gt;
&lt;label x=&quot;218.44&quot; y=&quot;86.36&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;PC6(/RESET)&quot;/&gt;
&lt;wire x1=&quot;35.56&quot; y1=&quot;78.74&quot; x2=&quot;38.1&quot; y2=&quot;78.74&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;43.434&quot; y=&quot;79.248&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;pinref part=&quot;S1&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;wire x1=&quot;38.1&quot; y1=&quot;78.74&quot; x2=&quot;50.8&quot; y2=&quot;78.74&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;35.56&quot; y1=&quot;73.66&quot; x2=&quot;38.1&quot; y2=&quot;73.66&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;38.1&quot; y1=&quot;73.66&quot; x2=&quot;38.1&quot; y2=&quot;78.74&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;38.1&quot; y=&quot;78.74&quot;/&gt;
&lt;pinref part=&quot;R23&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J2&quot; gate=&quot;G$1&quot; pin=&quot;5&quot;/&gt;
&lt;wire x1=&quot;60.96&quot; y1=&quot;124.46&quot; x2=&quot;55.88&quot; y2=&quot;124.46&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;55.88&quot; y=&quot;124.46&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;CANH&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;U3&quot; gate=&quot;MCP2551&quot; pin=&quot;CANH&quot;/&gt;
&lt;label x=&quot;233.68&quot; y=&quot;121.92&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;wire x1=&quot;208.28&quot; y1=&quot;121.92&quot; x2=&quot;233.68&quot; y2=&quot;121.92&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;U5&quot; gate=&quot;A&quot; pin=&quot;2&quot;/&gt;
&lt;wire x1=&quot;190.5&quot; y1=&quot;152.4&quot; x2=&quot;187.96&quot; y2=&quot;152.4&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;187.96&quot; y=&quot;152.4&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;JP1&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;wire x1=&quot;162.56&quot; y1=&quot;157.48&quot; x2=&quot;160.02&quot; y2=&quot;157.48&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;160.02&quot; y=&quot;157.48&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J1&quot; gate=&quot;G$1&quot; pin=&quot;3&quot;/&gt;
&lt;wire x1=&quot;10.16&quot; y1=&quot;111.76&quot; x2=&quot;17.78&quot; y2=&quot;111.76&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;10.16&quot; y=&quot;111.76&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;CANL&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;U3&quot; gate=&quot;MCP2551&quot; pin=&quot;CANL&quot;/&gt;
&lt;wire x1=&quot;208.28&quot; y1=&quot;119.38&quot; x2=&quot;233.68&quot; y2=&quot;119.38&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;233.68&quot; y=&quot;119.38&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;U5&quot; gate=&quot;A&quot; pin=&quot;1&quot;/&gt;
&lt;wire x1=&quot;185.42&quot; y1=&quot;157.48&quot; x2=&quot;190.5&quot; y2=&quot;157.48&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;193.04&quot; y=&quot;152.654&quot; size=&quot;1.016&quot; layer=&quot;95&quot;/&gt;
&lt;label x=&quot;184.658&quot; y=&quot;157.988&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;pinref part=&quot;R5&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J1&quot; gate=&quot;G$1&quot; pin=&quot;5&quot;/&gt;
&lt;wire x1=&quot;17.78&quot; y1=&quot;109.22&quot; x2=&quot;10.16&quot; y2=&quot;109.22&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;10.16&quot; y=&quot;109.22&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;INT&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;wire x1=&quot;215.9&quot; y1=&quot;60.96&quot; x2=&quot;218.44&quot; y2=&quot;60.96&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U2&quot; gate=&quot;G$1&quot; pin=&quot;INT&quot;/&gt;
&lt;label x=&quot;218.44&quot; y=&quot;60.96&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;D4&quot; gate=&quot;G$1&quot; pin=&quot;C&quot;/&gt;
&lt;wire x1=&quot;132.08&quot; y1=&quot;177.8&quot; x2=&quot;137.16&quot; y2=&quot;177.8&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;137.16&quot; y=&quot;177.8&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;5V&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;C10&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;pinref part=&quot;C8&quot; gate=&quot;G$1&quot; pin=&quot;+&quot;/&gt;
&lt;wire x1=&quot;43.18&quot; y1=&quot;50.8&quot; x2=&quot;35.56&quot; y2=&quot;50.8&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;35.56&quot; y1=&quot;50.8&quot; x2=&quot;17.78&quot; y2=&quot;50.8&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;35.56&quot; y=&quot;50.8&quot;/&gt;
&lt;pinref part=&quot;SUPPLY5&quot; gate=&quot;G$1&quot; pin=&quot;VCC&quot;/&gt;
&lt;wire x1=&quot;17.78&quot; y1=&quot;50.8&quot; x2=&quot;17.78&quot; y2=&quot;78.74&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;17.78&quot; y1=&quot;78.74&quot; x2=&quot;17.78&quot; y2=&quot;83.82&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;43.18&quot; y1=&quot;50.8&quot; x2=&quot;50.8&quot; y2=&quot;50.8&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;43.18&quot; y=&quot;50.8&quot;/&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;VCC&quot;/&gt;
&lt;wire x1=&quot;50.8&quot; y1=&quot;50.8&quot; x2=&quot;50.8&quot; y2=&quot;48.26&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;25.4&quot; y1=&quot;78.74&quot; x2=&quot;17.78&quot; y2=&quot;78.74&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;17.78&quot; y=&quot;78.74&quot;/&gt;
&lt;label x=&quot;16.256&quot; y=&quot;86.868&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;pinref part=&quot;R23&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;SUPPLY3&quot; gate=&quot;G$1&quot; pin=&quot;VCC&quot;/&gt;
&lt;wire x1=&quot;152.4&quot; y1=&quot;134.62&quot; x2=&quot;152.4&quot; y2=&quot;119.38&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;C11&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;pinref part=&quot;U3&quot; gate=&quot;MCP2551&quot; pin=&quot;VCC&quot;/&gt;
&lt;wire x1=&quot;172.72&quot; y1=&quot;119.38&quot; x2=&quot;182.88&quot; y2=&quot;119.38&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;C6&quot; gate=&quot;G$1&quot; pin=&quot;+&quot;/&gt;
&lt;wire x1=&quot;172.72&quot; y1=&quot;119.38&quot; x2=&quot;162.56&quot; y2=&quot;119.38&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;172.72&quot; y=&quot;119.38&quot;/&gt;
&lt;wire x1=&quot;152.4&quot; y1=&quot;119.38&quot; x2=&quot;162.56&quot; y2=&quot;119.38&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;162.56&quot; y=&quot;119.38&quot;/&gt;
&lt;label x=&quot;150.876&quot; y=&quot;137.414&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;U4&quot; gate=&quot;G$1&quot; pin=&quot;OUT&quot;/&gt;
&lt;wire x1=&quot;43.18&quot; y1=&quot;162.56&quot; x2=&quot;45.72&quot; y2=&quot;162.56&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;SUPPLY1&quot; gate=&quot;G$1&quot; pin=&quot;VCC&quot;/&gt;
&lt;wire x1=&quot;45.72&quot; y1=&quot;162.56&quot; x2=&quot;45.72&quot; y2=&quot;170.18&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;44.45&quot; y=&quot;172.974&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;U2&quot; gate=&quot;G$1&quot; pin=&quot;VCC&quot;/&gt;
&lt;pinref part=&quot;C9&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;wire x1=&quot;215.9&quot; y1=&quot;91.44&quot; x2=&quot;226.06&quot; y2=&quot;91.44&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;C7&quot; gate=&quot;G$1&quot; pin=&quot;+&quot;/&gt;
&lt;wire x1=&quot;226.06&quot; y1=&quot;91.44&quot; x2=&quot;233.68&quot; y2=&quot;91.44&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;226.06&quot; y=&quot;91.44&quot;/&gt;
&lt;wire x1=&quot;233.68&quot; y1=&quot;91.44&quot; x2=&quot;236.22&quot; y2=&quot;91.44&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;233.68&quot; y=&quot;91.44&quot;/&gt;
&lt;pinref part=&quot;SUPPLY4&quot; gate=&quot;G$1&quot; pin=&quot;VCC&quot;/&gt;
&lt;wire x1=&quot;236.22&quot; y1=&quot;91.44&quot; x2=&quot;236.22&quot; y2=&quot;99.06&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;234.696&quot; y=&quot;102.362&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J3&quot; gate=&quot;G$1&quot; pin=&quot;4&quot;/&gt;
&lt;wire x1=&quot;76.2&quot; y1=&quot;111.76&quot; x2=&quot;78.74&quot; y2=&quot;111.76&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;SUPPLY11&quot; gate=&quot;G$1&quot; pin=&quot;VCC&quot;/&gt;
&lt;wire x1=&quot;78.74&quot; y1=&quot;111.76&quot; x2=&quot;78.74&quot; y2=&quot;129.54&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;77.216&quot; y=&quot;137.414&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;pinref part=&quot;J2&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;wire x1=&quot;78.74&quot; y1=&quot;129.54&quot; x2=&quot;78.74&quot; y2=&quot;134.62&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;76.2&quot; y1=&quot;129.54&quot; x2=&quot;78.74&quot; y2=&quot;129.54&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;78.74&quot; y=&quot;129.54&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;SUPPLY2&quot; gate=&quot;G$1&quot; pin=&quot;VCC&quot;/&gt;
&lt;wire x1=&quot;106.68&quot; y1=&quot;177.8&quot; x2=&quot;106.68&quot; y2=&quot;167.64&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;111.76&quot; y=&quot;167.64&quot;/&gt;
&lt;wire x1=&quot;111.76&quot; y1=&quot;167.64&quot; x2=&quot;111.76&quot; y2=&quot;157.48&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;111.76&quot; y1=&quot;157.48&quot; x2=&quot;111.76&quot; y2=&quot;147.32&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;111.76&quot; y1=&quot;167.64&quot; x2=&quot;111.76&quot; y2=&quot;177.8&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;106.68&quot; y1=&quot;167.64&quot; x2=&quot;111.76&quot; y2=&quot;167.64&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;105.156&quot; y=&quot;180.594&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;pinref part=&quot;R1&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;pinref part=&quot;R2&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;pinref part=&quot;R3&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;junction x=&quot;111.76&quot; y=&quot;157.48&quot;/&gt;
&lt;pinref part=&quot;R4&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;AVCC&quot;/&gt;
&lt;wire x1=&quot;96.52&quot; y1=&quot;38.1&quot; x2=&quot;134.62&quot; y2=&quot;38.1&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;134.62&quot; y1=&quot;38.1&quot; x2=&quot;134.62&quot; y2=&quot;43.18&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;AREF&quot;/&gt;
&lt;wire x1=&quot;134.62&quot; y1=&quot;43.18&quot; x2=&quot;96.52&quot; y2=&quot;43.18&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;134.62&quot; y1=&quot;43.18&quot; x2=&quot;134.62&quot; y2=&quot;83.82&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;134.62&quot; y=&quot;43.18&quot;/&gt;
&lt;pinref part=&quot;SUPPLY14&quot; gate=&quot;G$1&quot; pin=&quot;VCC&quot;/&gt;
&lt;label x=&quot;133.096&quot; y=&quot;86.868&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;pinref part=&quot;R24&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;wire x1=&quot;124.46&quot; y1=&quot;20.32&quot; x2=&quot;134.62&quot; y2=&quot;20.32&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;134.62&quot; y1=&quot;20.32&quot; x2=&quot;134.62&quot; y2=&quot;38.1&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;134.62&quot; y=&quot;38.1&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J4&quot; gate=&quot;G$1&quot; pin=&quot;12&quot;/&gt;
&lt;pinref part=&quot;SUPPLY6&quot; gate=&quot;G$1&quot; pin=&quot;VCC&quot;/&gt;
&lt;wire x1=&quot;121.92&quot; y1=&quot;114.3&quot; x2=&quot;124.46&quot; y2=&quot;114.3&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;124.46&quot; y1=&quot;114.3&quot; x2=&quot;124.46&quot; y2=&quot;132.08&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;REVERSE&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;wire x1=&quot;96.52&quot; y1=&quot;53.34&quot; x2=&quot;99.06&quot; y2=&quot;53.34&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;PC0(ADC0)&quot;/&gt;
&lt;wire x1=&quot;99.06&quot; y1=&quot;53.34&quot; x2=&quot;101.6&quot; y2=&quot;53.34&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;114.3&quot; y1=&quot;50.8&quot; x2=&quot;99.06&quot; y2=&quot;50.8&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;99.06&quot; y1=&quot;50.8&quot; x2=&quot;99.06&quot; y2=&quot;53.34&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;99.06&quot; y=&quot;53.34&quot;/&gt;
&lt;label x=&quot;101.6&quot; y=&quot;53.34&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;pinref part=&quot;R14&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J4&quot; gate=&quot;G$1&quot; pin=&quot;10&quot;/&gt;
&lt;wire x1=&quot;121.92&quot; y1=&quot;116.84&quot; x2=&quot;129.54&quot; y2=&quot;116.84&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;129.54&quot; y=&quot;116.84&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;LEFT&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;wire x1=&quot;50.8&quot; y1=&quot;12.7&quot; x2=&quot;48.26&quot; y2=&quot;12.7&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;PB0(ICP)&quot;/&gt;
&lt;wire x1=&quot;48.26&quot; y1=&quot;12.7&quot; x2=&quot;45.72&quot; y2=&quot;12.7&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;30.48&quot; y1=&quot;10.16&quot; x2=&quot;48.26&quot; y2=&quot;10.16&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;48.26&quot; y1=&quot;10.16&quot; x2=&quot;48.26&quot; y2=&quot;12.7&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;48.26&quot; y=&quot;12.7&quot;/&gt;
&lt;label x=&quot;45.72&quot; y=&quot;12.7&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;pinref part=&quot;R16&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J4&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;wire x1=&quot;106.68&quot; y1=&quot;127&quot; x2=&quot;104.14&quot; y2=&quot;127&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;104.14&quot; y=&quot;127&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;RIGHT&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J4&quot; gate=&quot;G$1&quot; pin=&quot;3&quot;/&gt;
&lt;wire x1=&quot;106.68&quot; y1=&quot;124.46&quot; x2=&quot;104.14&quot; y2=&quot;124.46&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;104.14&quot; y=&quot;124.46&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;wire x1=&quot;50.8&quot; y1=&quot;17.78&quot; x2=&quot;48.26&quot; y2=&quot;17.78&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;PD7(AIN1)&quot;/&gt;
&lt;wire x1=&quot;48.26&quot; y1=&quot;17.78&quot; x2=&quot;45.72&quot; y2=&quot;17.78&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;30.48&quot; y1=&quot;15.24&quot; x2=&quot;48.26&quot; y2=&quot;15.24&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;48.26&quot; y1=&quot;15.24&quot; x2=&quot;48.26&quot; y2=&quot;17.78&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;48.26&quot; y=&quot;17.78&quot;/&gt;
&lt;label x=&quot;45.72&quot; y=&quot;17.78&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;pinref part=&quot;R17&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;CC_ON/OFF&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;wire x1=&quot;50.8&quot; y1=&quot;27.94&quot; x2=&quot;48.26&quot; y2=&quot;27.94&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;PD5(T1)&quot;/&gt;
&lt;wire x1=&quot;48.26&quot; y1=&quot;27.94&quot; x2=&quot;45.72&quot; y2=&quot;27.94&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;30.48&quot; y1=&quot;25.4&quot; x2=&quot;48.26&quot; y2=&quot;25.4&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;48.26&quot; y1=&quot;25.4&quot; x2=&quot;48.26&quot; y2=&quot;27.94&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;48.26&quot; y=&quot;27.94&quot;/&gt;
&lt;label x=&quot;45.72&quot; y=&quot;27.94&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;pinref part=&quot;R19&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J4&quot; gate=&quot;G$1&quot; pin=&quot;11&quot;/&gt;
&lt;wire x1=&quot;106.68&quot; y1=&quot;114.3&quot; x2=&quot;104.14&quot; y2=&quot;114.3&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;104.14&quot; y=&quot;114.3&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;CC_INC&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;PD3(INT1)&quot;/&gt;
&lt;wire x1=&quot;50.8&quot; y1=&quot;58.42&quot; x2=&quot;48.26&quot; y2=&quot;58.42&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;48.26&quot; y1=&quot;58.42&quot; x2=&quot;45.72&quot; y2=&quot;58.42&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;33.02&quot; y1=&quot;60.96&quot; x2=&quot;48.26&quot; y2=&quot;60.96&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;48.26&quot; y1=&quot;60.96&quot; x2=&quot;48.26&quot; y2=&quot;58.42&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;48.26&quot; y=&quot;58.42&quot;/&gt;
&lt;label x=&quot;45.72&quot; y=&quot;58.42&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;pinref part=&quot;R21&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J4&quot; gate=&quot;G$1&quot; pin=&quot;7&quot;/&gt;
&lt;wire x1=&quot;106.68&quot; y1=&quot;119.38&quot; x2=&quot;104.14&quot; y2=&quot;119.38&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;104.14&quot; y=&quot;119.38&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;CC_DEC&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;PD2(INT0)&quot;/&gt;
&lt;wire x1=&quot;50.8&quot; y1=&quot;63.5&quot; x2=&quot;48.26&quot; y2=&quot;63.5&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;48.26&quot; y1=&quot;63.5&quot; x2=&quot;45.72&quot; y2=&quot;63.5&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;33.02&quot; y1=&quot;66.04&quot; x2=&quot;48.26&quot; y2=&quot;66.04&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;48.26&quot; y1=&quot;66.04&quot; x2=&quot;48.26&quot; y2=&quot;63.5&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;48.26&quot; y=&quot;63.5&quot;/&gt;
&lt;label x=&quot;45.72&quot; y=&quot;63.5&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;pinref part=&quot;R22&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J4&quot; gate=&quot;G$1&quot; pin=&quot;5&quot;/&gt;
&lt;wire x1=&quot;106.68&quot; y1=&quot;121.92&quot; x2=&quot;104.14&quot; y2=&quot;121.92&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;104.14&quot; y=&quot;121.92&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;DRIVE&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J4&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;wire x1=&quot;121.92&quot; y1=&quot;127&quot; x2=&quot;129.54&quot; y2=&quot;127&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;129.54&quot; y=&quot;127&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;wire x1=&quot;96.52&quot; y1=&quot;12.7&quot; x2=&quot;99.06&quot; y2=&quot;12.7&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;PB1(OC1A)&quot;/&gt;
&lt;wire x1=&quot;99.06&quot; y1=&quot;12.7&quot; x2=&quot;101.6&quot; y2=&quot;12.7&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;114.3&quot; y1=&quot;10.16&quot; x2=&quot;99.06&quot; y2=&quot;10.16&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;99.06&quot; y1=&quot;10.16&quot; x2=&quot;99.06&quot; y2=&quot;12.7&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;99.06&quot; y=&quot;12.7&quot;/&gt;
&lt;label x=&quot;101.6&quot; y=&quot;12.7&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;pinref part=&quot;R15&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;TX&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;wire x1=&quot;50.8&quot; y1=&quot;68.58&quot; x2=&quot;48.26&quot; y2=&quot;68.58&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;PD1(TXD)&quot;/&gt;
&lt;label x=&quot;48.26&quot; y=&quot;68.58&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J3&quot; gate=&quot;G$1&quot; pin=&quot;3&quot;/&gt;
&lt;wire x1=&quot;60.96&quot; y1=&quot;111.76&quot; x2=&quot;55.88&quot; y2=&quot;111.76&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;55.88&quot; y=&quot;111.76&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;RX&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;wire x1=&quot;50.8&quot; y1=&quot;73.66&quot; x2=&quot;48.26&quot; y2=&quot;73.66&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;PD0(RXD)&quot;/&gt;
&lt;label x=&quot;48.26&quot; y=&quot;73.66&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J3&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;wire x1=&quot;60.96&quot; y1=&quot;114.3&quot; x2=&quot;55.88&quot; y2=&quot;114.3&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;55.88&quot; y=&quot;114.3&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;HEADLIGHT&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;PD6(AIN0)&quot;/&gt;
&lt;wire x1=&quot;50.8&quot; y1=&quot;22.86&quot; x2=&quot;48.26&quot; y2=&quot;22.86&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;48.26&quot; y1=&quot;22.86&quot; x2=&quot;45.72&quot; y2=&quot;22.86&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;30.48&quot; y1=&quot;20.32&quot; x2=&quot;48.26&quot; y2=&quot;20.32&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;48.26&quot; y1=&quot;20.32&quot; x2=&quot;48.26&quot; y2=&quot;22.86&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;48.26&quot; y=&quot;22.86&quot;/&gt;
&lt;label x=&quot;45.72&quot; y=&quot;22.86&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;pinref part=&quot;R18&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J4&quot; gate=&quot;G$1&quot; pin=&quot;13&quot;/&gt;
&lt;wire x1=&quot;106.68&quot; y1=&quot;111.76&quot; x2=&quot;104.14&quot; y2=&quot;111.76&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;104.14&quot; y=&quot;111.76&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;N$1&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;wire x1=&quot;182.88&quot; y1=&quot;60.96&quot; x2=&quot;182.88&quot; y2=&quot;63.5&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;R7&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;wire x1=&quot;182.88&quot; y1=&quot;63.5&quot; x2=&quot;177.8&quot; y2=&quot;63.5&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;177.8&quot; y1=&quot;63.5&quot; x2=&quot;167.64&quot; y2=&quot;63.5&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;177.8&quot; y=&quot;63.5&quot;/&gt;
&lt;pinref part=&quot;Y2&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;wire x1=&quot;167.64&quot; y1=&quot;60.96&quot; x2=&quot;167.64&quot; y2=&quot;63.5&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U2&quot; gate=&quot;G$1&quot; pin=&quot;OSC2&quot;/&gt;
&lt;pinref part=&quot;C3&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;wire x1=&quot;162.56&quot; y1=&quot;63.5&quot; x2=&quot;167.64&quot; y2=&quot;63.5&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;167.64&quot; y=&quot;63.5&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;N$5&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;wire x1=&quot;182.88&quot; y1=&quot;55.88&quot; x2=&quot;182.88&quot; y2=&quot;53.34&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;R7&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;wire x1=&quot;182.88&quot; y1=&quot;53.34&quot; x2=&quot;177.8&quot; y2=&quot;53.34&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;177.8&quot; y1=&quot;53.34&quot; x2=&quot;167.64&quot; y2=&quot;53.34&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;177.8&quot; y=&quot;53.34&quot;/&gt;
&lt;pinref part=&quot;C4&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;pinref part=&quot;Y2&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;wire x1=&quot;167.64&quot; y1=&quot;53.34&quot; x2=&quot;162.56&quot; y2=&quot;53.34&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;167.64&quot; y1=&quot;55.88&quot; x2=&quot;167.64&quot; y2=&quot;53.34&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;167.64&quot; y=&quot;53.34&quot;/&gt;
&lt;pinref part=&quot;U2&quot; gate=&quot;G$1&quot; pin=&quot;OSC1&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;N$9&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;R8&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;pinref part=&quot;C2&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;wire x1=&quot;35.56&quot; y1=&quot;30.48&quot; x2=&quot;25.4&quot; y2=&quot;30.48&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;Y1&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;wire x1=&quot;25.4&quot; y1=&quot;30.48&quot; x2=&quot;17.78&quot; y2=&quot;30.48&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;25.4&quot; y1=&quot;33.02&quot; x2=&quot;25.4&quot; y2=&quot;30.48&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;25.4&quot; y=&quot;30.48&quot;/&gt;
&lt;wire x1=&quot;35.56&quot; y1=&quot;30.48&quot; x2=&quot;40.64&quot; y2=&quot;30.48&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;35.56&quot; y=&quot;30.48&quot;/&gt;
&lt;wire x1=&quot;40.64&quot; y1=&quot;30.48&quot; x2=&quot;40.64&quot; y2=&quot;33.02&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;PB7(XTAL2/TOSC2)&quot;/&gt;
&lt;wire x1=&quot;40.64&quot; y1=&quot;33.02&quot; x2=&quot;50.8&quot; y2=&quot;33.02&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;N$11&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;JP1&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;wire x1=&quot;175.26&quot; y1=&quot;157.48&quot; x2=&quot;172.72&quot; y2=&quot;157.48&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;R5&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;N$2&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;D1&quot; gate=&quot;G$1&quot; pin=&quot;A&quot;/&gt;
&lt;wire x1=&quot;121.92&quot; y1=&quot;147.32&quot; x2=&quot;124.46&quot; y2=&quot;147.32&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;R4&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;N$6&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;D2&quot; gate=&quot;G$1&quot; pin=&quot;A&quot;/&gt;
&lt;wire x1=&quot;124.46&quot; y1=&quot;167.64&quot; x2=&quot;121.92&quot; y2=&quot;167.64&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;R2&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;N$7&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;D3&quot; gate=&quot;G$1&quot; pin=&quot;A&quot;/&gt;
&lt;wire x1=&quot;121.92&quot; y1=&quot;157.48&quot; x2=&quot;124.46&quot; y2=&quot;157.48&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;R3&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;N$8&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;D4&quot; gate=&quot;G$1&quot; pin=&quot;A&quot;/&gt;
&lt;wire x1=&quot;121.92&quot; y1=&quot;177.8&quot; x2=&quot;124.46&quot; y2=&quot;177.8&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;R1&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;SWITCH&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;C5&quot; gate=&quot;G$1&quot; pin=&quot;+&quot;/&gt;
&lt;pinref part=&quot;U4&quot; gate=&quot;G$1&quot; pin=&quot;IN&quot;/&gt;
&lt;wire x1=&quot;20.32&quot; y1=&quot;162.56&quot; x2=&quot;27.94&quot; y2=&quot;162.56&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;20.32&quot; y1=&quot;162.56&quot; x2=&quot;17.78&quot; y2=&quot;162.56&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;20.32&quot; y=&quot;162.56&quot;/&gt;
&lt;pinref part=&quot;SWITCH&quot; gate=&quot;G$1&quot; pin=&quot;VCC&quot;/&gt;
&lt;wire x1=&quot;17.78&quot; y1=&quot;162.56&quot; x2=&quot;17.78&quot; y2=&quot;170.18&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;12.954&quot; y=&quot;172.974&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J1&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;wire x1=&quot;33.02&quot; y1=&quot;114.3&quot; x2=&quot;35.56&quot; y2=&quot;114.3&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;35.56&quot; y1=&quot;114.3&quot; x2=&quot;35.56&quot; y2=&quot;116.84&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;SUPPLY9&quot; gate=&quot;G$1&quot; pin=&quot;VCC&quot;/&gt;
&lt;label x=&quot;30.988&quot; y=&quot;119.634&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;CC_SET&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J4&quot; gate=&quot;G$1&quot; pin=&quot;9&quot;/&gt;
&lt;wire x1=&quot;106.68&quot; y1=&quot;116.84&quot; x2=&quot;104.14&quot; y2=&quot;116.84&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;104.14&quot; y=&quot;116.84&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;wire x1=&quot;50.8&quot; y1=&quot;53.34&quot; x2=&quot;48.26&quot; y2=&quot;53.34&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;PD4(XCK/T0)&quot;/&gt;
&lt;wire x1=&quot;48.26&quot; y1=&quot;53.34&quot; x2=&quot;45.72&quot; y2=&quot;53.34&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;33.02&quot; y1=&quot;55.88&quot; x2=&quot;48.26&quot; y2=&quot;55.88&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;48.26&quot; y1=&quot;55.88&quot; x2=&quot;48.26&quot; y2=&quot;53.34&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;48.26&quot; y=&quot;53.34&quot;/&gt;
&lt;label x=&quot;45.72&quot; y=&quot;53.34&quot; size=&quot;1.016&quot; layer=&quot;95&quot; rot=&quot;R180&quot; xref=&quot;yes&quot;/&gt;
&lt;pinref part=&quot;R20&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;N$17&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;PC4(ADC4/SDA)&quot;/&gt;
&lt;wire x1=&quot;96.52&quot; y1=&quot;73.66&quot; x2=&quot;99.06&quot; y2=&quot;73.66&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;R10&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;N$13&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;D_LED1&quot; gate=&quot;G$1&quot; pin=&quot;A&quot;/&gt;
&lt;wire x1=&quot;109.22&quot; y1=&quot;81.28&quot; x2=&quot;114.3&quot; y2=&quot;81.28&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;R9&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;N$15&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;D_LED2&quot; gate=&quot;G$1&quot; pin=&quot;A&quot;/&gt;
&lt;wire x1=&quot;109.22&quot; y1=&quot;73.66&quot; x2=&quot;114.3&quot; y2=&quot;73.66&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;R10&quot; gate=&quot;G$1&quot; pin=&quot;2&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;N$12&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;PC5(ADC5/SCL)&quot;/&gt;
&lt;wire x1=&quot;96.52&quot; y1=&quot;78.74&quot; x2=&quot;99.06&quot; y2=&quot;78.74&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;99.06&quot; y1=&quot;78.74&quot; x2=&quot;99.06&quot; y2=&quot;81.28&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;R9&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;SUPP&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J1&quot; gate=&quot;G$1&quot; pin=&quot;6&quot;/&gt;
&lt;wire x1=&quot;33.02&quot; y1=&quot;109.22&quot; x2=&quot;45.72&quot; y2=&quot;109.22&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;45.72&quot; y1=&quot;109.22&quot; x2=&quot;45.72&quot; y2=&quot;121.92&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;SUPPLY7&quot; gate=&quot;G$1&quot; pin=&quot;VCC&quot;/&gt;
&lt;label x=&quot;42.926&quot; y=&quot;124.714&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;DC-DC&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J1&quot; gate=&quot;G$1&quot; pin=&quot;4&quot;/&gt;
&lt;wire x1=&quot;33.02&quot; y1=&quot;111.76&quot; x2=&quot;40.64&quot; y2=&quot;111.76&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;40.64&quot; y1=&quot;111.76&quot; x2=&quot;40.64&quot; y2=&quot;119.38&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;SUPPLY8&quot; gate=&quot;G$1&quot; pin=&quot;VCC&quot;/&gt;
&lt;label x=&quot;37.084&quot; y=&quot;122.174&quot; size=&quot;1.778&quot; layer=&quot;95&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;HORN&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;PC1(ADC1)&quot;/&gt;
&lt;wire x1=&quot;96.52&quot; y1=&quot;58.42&quot; x2=&quot;99.06&quot; y2=&quot;58.42&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;99.06&quot; y1=&quot;58.42&quot; x2=&quot;101.6&quot; y2=&quot;58.42&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;114.3&quot; y1=&quot;55.88&quot; x2=&quot;99.06&quot; y2=&quot;55.88&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;99.06&quot; y1=&quot;55.88&quot; x2=&quot;99.06&quot; y2=&quot;58.42&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;99.06&quot; y=&quot;58.42&quot;/&gt;
&lt;label x=&quot;101.6&quot; y=&quot;58.42&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;pinref part=&quot;R13&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J4&quot; gate=&quot;G$1&quot; pin=&quot;8&quot;/&gt;
&lt;wire x1=&quot;121.92&quot; y1=&quot;119.38&quot; x2=&quot;129.54&quot; y2=&quot;119.38&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;129.54&quot; y=&quot;119.38&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;N$3&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;U3&quot; gate=&quot;MCP2551&quot; pin=&quot;RS&quot;/&gt;
&lt;pinref part=&quot;R6&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;wire x1=&quot;208.28&quot; y1=&quot;124.46&quot; x2=&quot;215.9&quot; y2=&quot;124.46&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;ACC&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;wire x1=&quot;96.52&quot; y1=&quot;68.58&quot; x2=&quot;99.06&quot; y2=&quot;68.58&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;PC3(ADC3)&quot;/&gt;
&lt;wire x1=&quot;99.06&quot; y1=&quot;68.58&quot; x2=&quot;101.6&quot; y2=&quot;68.58&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;114.3&quot; y1=&quot;66.04&quot; x2=&quot;99.06&quot; y2=&quot;66.04&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;99.06&quot; y1=&quot;66.04&quot; x2=&quot;99.06&quot; y2=&quot;68.58&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;99.06&quot; y=&quot;68.58&quot;/&gt;
&lt;label x=&quot;101.6&quot; y=&quot;68.58&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;pinref part=&quot;R11&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J4&quot; gate=&quot;G$1&quot; pin=&quot;4&quot;/&gt;
&lt;wire x1=&quot;121.92&quot; y1=&quot;124.46&quot; x2=&quot;129.54&quot; y2=&quot;124.46&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;129.54&quot; y=&quot;124.46&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;net name=&quot;BREAKS_ON/OFF&quot; class=&quot;0&quot;&gt;
&lt;segment&gt;
&lt;pinref part=&quot;U1&quot; gate=&quot;U1&quot; pin=&quot;PC2(ADC2)&quot;/&gt;
&lt;wire x1=&quot;96.52&quot; y1=&quot;63.5&quot; x2=&quot;99.06&quot; y2=&quot;63.5&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;junction x=&quot;99.06&quot; y=&quot;63.5&quot;/&gt;
&lt;wire x1=&quot;99.06&quot; y1=&quot;63.5&quot; x2=&quot;101.6&quot; y2=&quot;63.5&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;99.06&quot; y1=&quot;63.5&quot; x2=&quot;99.06&quot; y2=&quot;60.96&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;wire x1=&quot;99.06&quot; y1=&quot;60.96&quot; x2=&quot;114.3&quot; y2=&quot;60.96&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;101.6&quot; y=&quot;63.5&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;pinref part=&quot;R12&quot; gate=&quot;G$1&quot; pin=&quot;1&quot;/&gt;
&lt;/segment&gt;
&lt;segment&gt;
&lt;pinref part=&quot;J4&quot; gate=&quot;G$1&quot; pin=&quot;6&quot;/&gt;
&lt;wire x1=&quot;121.92&quot; y1=&quot;121.92&quot; x2=&quot;129.54&quot; y2=&quot;121.92&quot; width=&quot;0.1524&quot; layer=&quot;91&quot;/&gt;
&lt;label x=&quot;129.54&quot; y=&quot;121.92&quot; size=&quot;1.016&quot; layer=&quot;95&quot; xref=&quot;yes&quot;/&gt;
&lt;/segment&gt;
&lt;/net&gt;
&lt;/nets&gt;
&lt;/sheet&gt;
&lt;/sheets&gt;
&lt;errors&gt;
&lt;approved hash=&quot;102,1,17.78,170.18,VCC,SWITCH,,,,&quot;/&gt;
&lt;approved hash=&quot;102,1,45.72,170.18,VCC,5V,,,,&quot;/&gt;
&lt;approved hash=&quot;102,1,106.68,177.8,VCC,5V,,,,&quot;/&gt;
&lt;approved hash=&quot;102,1,152.4,134.62,VCC,5V,,,,&quot;/&gt;
&lt;approved hash=&quot;102,1,236.22,99.06,VCC,5V,,,,&quot;/&gt;
&lt;approved hash=&quot;102,1,17.78,83.82,VCC,5V,,,,&quot;/&gt;
&lt;approved hash=&quot;102,1,45.72,121.92,VCC,SUPP,,,,&quot;/&gt;
&lt;approved hash=&quot;102,1,40.64,119.38,VCC,DC-DC,,,,&quot;/&gt;
&lt;approved hash=&quot;102,1,35.56,116.84,VCC,SWITCH,,,,&quot;/&gt;
&lt;approved hash=&quot;102,1,78.74,134.62,VCC,5V,,,,&quot;/&gt;
&lt;approved hash=&quot;102,1,134.62,83.82,VCC,5V,,,,&quot;/&gt;
&lt;approved hash=&quot;201,1,134.62,83.82,VCC,SWITCH\, 5V\, SUPP\, DC-DC,,,,&quot;/&gt;
&lt;approved hash=&quot;201,1,78.74,134.62,VCC,SWITCH\, 5V\, SUPP\, DC-DC,,,,&quot;/&gt;
&lt;approved hash=&quot;201,1,35.56,116.84,VCC,SWITCH\, 5V\, SUPP\, DC-DC,,,,&quot;/&gt;
&lt;approved hash=&quot;201,1,40.64,119.38,VCC,SWITCH\, 5V\, SUPP\, DC-DC,,,,&quot;/&gt;
&lt;approved hash=&quot;201,1,45.72,121.92,VCC,SWITCH\, 5V\, SUPP\, DC-DC,,,,&quot;/&gt;
&lt;approved hash=&quot;201,1,17.78,83.82,VCC,SWITCH\, 5V\, SUPP\, DC-DC,,,,&quot;/&gt;
&lt;approved hash=&quot;201,1,236.22,99.06,VCC,SWITCH\, 5V\, SUPP\, DC-DC,,,,&quot;/&gt;
&lt;approved hash=&quot;201,1,152.4,134.62,VCC,SWITCH\, 5V\, SUPP\, DC-DC,,,,&quot;/&gt;
&lt;approved hash=&quot;201,1,106.68,177.8,VCC,SWITCH\, 5V\, SUPP\, DC-DC,,,,&quot;/&gt;
&lt;approved hash=&quot;201,1,45.72,170.18,VCC,SWITCH\, 5V\, SUPP\, DC-DC,,,,&quot;/&gt;
&lt;approved hash=&quot;201,1,17.78,170.18,VCC,SWITCH\, 5V\, SUPP\, DC-DC,,,,&quot;/&gt;
&lt;approved hash=&quot;106,1,33.02,111.76,DC-DC,,,,,&quot;/&gt;
&lt;approved hash=&quot;106,1,40.64,119.38,DC-DC,,,,,&quot;/&gt;
&lt;approved hash=&quot;106,1,33.02,109.22,SUPP,,,,,&quot;/&gt;
&lt;approved hash=&quot;106,1,45.72,121.92,SUPP,,,,,&quot;/&gt;
&lt;/errors&gt;
&lt;/schematic&gt;
&lt;/drawing&gt;
&lt;compatibility&gt;
&lt;note version=&quot;8.3&quot; severity=&quot;warning&quot;&gt;
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
&lt;/note&gt;
&lt;note version=&quot;8.3&quot; severity=&quot;warning&quot;&gt;
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.
&lt;/note&gt;
&lt;/compatibility&gt;
&lt;/eagle&gt;
</pre>